Oracle-xe apex not working on LAN

Hi,
I have oracle-xe installed and configured on a headless ubuntu box.
The service appears to be running although I cannot access the apex front-end (apparently running on port 8080) on the LAN. If I put the ip address + port of the box into my browser I simply get "404 page not found."
iptables is not running. I cannot telnet to port 8080.
Any ideas ? Is there a config file somewhere for apex I can look at ?
wulfgarpro.

Can we assume you have followed the documentation (found thru http://tahiti.oracle.com), and in particular the part of the install document that discusses "Making Oracle Database XE Server Available to Remote Clients"?
netstat for that port?
Listener running and ack'ing the database? (lsnrctl status)
As Dan mentions, the XE forum discusses this occasionally.

Similar Messages

Oracle BPA drilldown not working on Lanes?

I am using Oracle BPA v10.1.3.4.271679 on 32 bit Windows and have found that when I have a function or sub-process sited on a Lane I cannot drill down to any assigned models by double clicking on the drilldown icon.
If I drag the object off of the lane drilldown works just fine.
This is annoying, is it a bug or am I doing something wrong?

Hi,
one simple explanation could be that you have selected the lane when trying to drill down on the icon. In this combination the drill down sometimes is not possible.
This is the same in ARIS and I consider it "a feature" ;-)
If this is not the case we have to investigate further
Cheers
Dirk

Why Oracle 8i is not Working with JDK 1.3

Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com

APEX not working with SSO

I am trying to setup APEX 3.1 (fresh installation not upgrade) to work with SSO on Linux.
APEX and AP infrastructure are installed on separate servers and APEX is working with mid tier HTTP server.
I have followed the steps below and I don’t get any error messages at all but when I finally point the browser to an application I get an error:
ERR-7620 Could not determine workspace for application
Expecting p_company or wwv_flow_company cookie to contain security group id
I would appreciate any help
Regards,
Anna
alter user flows_030100 identified by xxxx;
alter user flows_030100 account unlock;
Loaded SSO SDK into the flows_030100 schema @APEX_DB
Registered ApEx as a partner application, supplied values:
HOME URL : http://serverABC.ypgstaging.local:7777/pls/apex
Success URL : http://serverABC.ypgstaging.local:7777/pls/apex/wwv_flow_custom_auth_sso.process_success
Log Out URL : http://serverABC.ypgstaging.local:7777/pls/apex/apex
Application Name APEX
As flows_040100@APEX_DB:
SQL> @regapp.sql
Partner Application Configuration
Enter value for listener_token: apex:serverABC.ypg.local:7777
Enter value for site_id: 6F20F2EF
Enter value for site_token: W201QS2F6F20F2EF
Enter value for login_url: http://serverABC.ypg.local:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
Enter value for encryption_key: 3F7CD0E25D17A170
Enter value for ip_check: N
Registration successful.
Listener token: apex:serverABC.ypg.local:7777
Site id : 6F20F2EF
Site token : W201QS2F6F20F2EF
Encryption key: 3F7CD0E25D17A170
Login URL :
http://serverABC.ypg.local:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
Logout URL :
http://serverABC.ypg.local:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
IP check : N
PL/SQL procedure successfully completed.
Commit complete.
No errors.
SQL> select * from wwsec_enabler_config_info$;
LSNR_TOKEN
SITE_TOKEN
SITE_ID
LS_LOGIN_URL
URLCOOKIE_VERSION
ENCRYPTION_KEY
ENCRYPTION_MASK_PRE
ENCRYPTION_MASK_POST
U
apex:serverABC.ypg.local:7777
W201QS2F6F20F2EF
6F20F2EF
http://serverABC.ypg.local:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
v1.2
3F7CD0E25D17A170
C70C4A8B5227430F37EA0903E8A7C7BC
35B1659E7B2E5FB7BF1C0381B44E1FF9
N
Then on APEX_DB server I ran the following:
[oracle@ATC1SDBYM01 core]$ sqlplus
Enter user-name: / as sysdba
SQL> alter session set current_schema=flows_030100;
Session altered.
SQL> @custom_auth_sso_902.sql
...wwv_flow_custom_auth_sso
Package created.
No errors.
SQL> @custom_auth_sso_902.plb
...wwv_flow_custom_auth_sso
Package body created.
No errors.
SQL> grant execute on wwv_flow_custom_auth_sso to public;
Grant succeeded.
alter user flows_030100 identified by values ‘xxx’;
alter user flows_030100 account lock;
Here is a test application URL:
http:/serverABC.ypgstaging.local:7778/pls/apex/f?p=F101::&c=yellowmart
The application authentication schema is set to SSO.

Scott
I have restarted AS and rerun the regapp script successfully. I have noticed I entered the wrong domain name while registering it first time and I have corrected the error this time.
SQL> select * from wwsec_enabler_config_info$;
LSNR_TOKEN
SITE_TOKEN
SITE_ID
LS_LOGIN_URL
URLCOOKIE_VERSION
ENCRYPTION_KEY
ENCRYPTION_MASK_PRE
ENCRYPTION_MASK_POST
U
HTML_DB:serverABC.ypgstaging.local:7777
W201QS2F6F20F2EF
6F20F2EF
http://serverABC.ypgstaging.local:7777/pls/orasso/orasso.wwsso_app_admin.ls_lo
gin
v1.2
3F7CD0E25D17A170
C70C4A8B5227430F37EA0903E8A7C7BC
35B1659E7B2E5FB7BF1C0381B44E1FF9
N
However I still get the same error message in my browser when I point it to the application.
Regards,
Anna

Oracle 11g XE not working with oracle BI publisher 10g after enabling ACL

Hello,
I previously work with oracle 10gXE and Oracle BI publisher 10g and it work fine. now i install oracle 11g XE and try to configure it with oracle Bi Publlisher, it show this error
"ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1324 ORA-12570: TNS:packet reader failure" after runing the ACL package to neable network service.
on the database.
Please can any body tell be why this is not working. Tanx.

You'll need to add the apex engine owner to the ACL (Access Control List). Depending on your version of apex the user name varies. i.e. 4.0 is APEX_040000
See Joel's blog for info about the ACL and APEX.
[http://joelkallman.blogspot.com/2010/10/application-express-network-acls-and.html]

Oracle & PHP/Apache not working togather for unicode (working individually)

hi, i have oracle xe zend core for oracle installed.
When i insert data through aplication express or oracle sql developer its perfect. Unicode can be inserted and viewed, but when I try to view same data through php script it display ??? signs only english character show properly.
Seems the unicode enviourment issue with php/apache and oracle communication, as php pages display uniode correctly when not taking data from oracle. I need help
I have gone through globlizing_oracle_php_applications.pdf and have enabled mbstring, also php charset is utf8 i also used 'AL32UTF8' in connection string.
Also if someone can provide a small sample php script to insert or view unicode data.
thanks

root the php module seems to be not working as the
displayed index.php was just text page. I tried with
apache2 as well but the result was the same.I don't believe the apache included with Solaris 10 includes PHP support; you will probably have to re-compile it . See the README file in /etc/apache for the actual config of the distributed version.

Oracle equals_path condition NOT working with table and materialized view

The user i am using is xdb with dba role.
1.When i try to use the statement
SELECT PATH FROM xdb.path_VIEW
WHERE
EQUALS_PATH(res, '/home/OE/PurchaseOrders/2002')=1
the result is
/home/OE/PurchaseOrders/2002
2. When i drop the path_view and recreated it like materialized view with statement
create MATERIALIZED view path_view as
select /*+ ORDERED */ t2.path path, t.res res,
xmltype.createxml(xdb.xdb_link_type(NULL, r2.xmldata.dispname, t.name,
h.name, h.flags, h.parent_oid, h.child_oid),
'http://xmlns.oracle.com/xdb/XDBStandard.xsd', 'LINK') link,
t.resid
from ( select xdb.all_path(9999) paths, value(p) res, p.sys_nc_oid$ resid,
p.xmldata.dispname name
from xdb.xdb$resource p
where xdb.under_path(value(p), '/', 9999)=1 ) t,
TABLE( cast (t.paths as xdb.path_array) ) t2,
xdb.xdb$h_link h, xdb.xdb$resource r2
where t2.parent_oid = h.parent_oid and t2.childname = h.name and
t2.parent_oid = r2.sys_nc_oid$
then the equals_path condition STOP working !!!
3. The same experiment, but i recreate it like table
create table path_view as .... using the rest of the statement ...
Can someone help me to understand why equals_path is NOT working on table and materialized view !

Thanks Jonah. I was under the impression that I already had it but seems like it has to be a direct priv - thru a role doesn't work.
I granted the reqd privs and then it worked fine. Thx for your help!

Oracle 6i Report Not working

Hi,
I have a Oracle Apps - 6i Report works fine with one instance and the same report does not fetch any records in the other instance..
Even its not printing the messages in the before report trigger, when i query from the backed it fetches records. This is really strange..
Please any one help me on this.
Thanks,
Genoo

It doesn't look like this has anything to do with Reports itself. You'd better ask this in the Oracle Apps forum.

Oracle 10g Client not working from Vista Business

Hi,
I have installed Oracle 10g Rel2 DB on my desktop (OS Vista Ultimate X64 bit) and try to connect from my new laptop (OS Vista business) after installing the client software which does not work, whereas I am able to connect to same database from my other laptop using Windows XP. The tnsnames.ora files on both laptops have the same contents. Moreover, the SQL Plus is also not working on the vista laptop, I mean when I try to login the window closes down itself it doesn't stay open even to give any error message. . . Any ideas would be a great help . . .thx

Did you install the Vista specific Oracle client?
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html

5.1 Soundblaster not working, now LAN not working eith

Hi,
I'm new here, and would greatly appreciate any help anyone can give me. I've tried searching and looking through all the FAQ's I could find, but still am not able to find a solution.
I am running windows XP and I have a Soundblaster 5. card, and it's worked perfectly until last night. I had my headphones plugged in, and decided to plug in my Creative speakers instead. When I tried to plug the speakers in, soundcard appeared to be not working. I opened up my computer and took out the sound card and put it back in again, thinking I had maybe knocked it loose. I then went to check it under Windows device manager and it was listed as 'Multimedia Audio Controller" and said I had no drivers installed. I came here to the website, typed in the model number, got the correct drivers, but when I try to install the drivers, I get an error message saying that there is not a compatible device installed. I tried removing the card and putting it back in, also tried putting it into a different slot, but to no avail.
Now the biggest problem; after plugging my sound card in for the 4th time, my network connection stopped working. I'm connected to a LAN, and it keeps saying it's unable to renew my IP address. In device manager, it doesn't look like there's anything wrong with my network card.... could it be possible that I somehow fried the on-board network card when I was putting the sound card in?
I'm really at a loss as to what to do here. ANY suggestions at all would be GREATLY appreciated.
Thank you very much in advance.

Quote from: Chrysomya on 29-April-13, 20:14:26
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Your issue is drivers related.
For Windows 8 use 6.0.1.6839
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064

OTN Oracle Database Downloads Not Working

After agrgeeing to the T&C's none of the download links work.
See this page for example:
http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html
Specific Download not working:
http://download.oracle.com/otn/linux/oracle9i/9202/ship_9202_ia64_lnx_Disk1.cpio.gz
Regards,
Andrew

Seems to be fine. Try this link instead: http://otn.oracle.com/software/htdocs/devlic.html?http://download-west.oracle.com/otn/linux/oracle9i/9202/ship_9202_ia64_lnx_Disk1.cpio.gz
OTN Team

In oracle vmware broadband not working

Hi,
I have installed Oracle VM ware 4.2.0 in my laptop ( having windows OS home basis 7 ) not able to connect broadband.
In VM Ware installed Red Hat Linux.
Please assist me where i can give Network setting correctly among Adapter 1 to 4.
Thnks in Advance !
Regards,
Ramprakash Arun

Rampraksh Arun wrote:
In windows Tata photon data card, its working fine.
If u ping with windows to Linux able to see the connectivity. Plbm is not able to ping to Linux to windows dude !Which means your networking is not configured correctly. We have provided suggestions. You have ignored that, still do not tell us HOW you have configured your virtual networking, do not show us any errors... so what do you expect us to do? Magically see via a crystal ball what the actual networking configuration is on your side?
You: My car does not work!
Us: Tell us what exactly does not work?
You: My car still does not work!
It is pointless to continue such a conversation.

Oracle Forms Demo Not working -- Attn. Oracle Customer Service

Hi,
I try to see Multiselect T-List Demo in the following page.It's not working.
http://www.oracle.com/technology/sample_code/products/forms/index9i.html
-Murali

Hello,
have you read the <ORACLE_HOME>\forms90\demos\multiselect\doc\multiselect90.html doc file ?
this is a part of the content:
"Enabling and Using the Multi-Select capabilities of the PJCBy default the enhanced TList continues to operate just like a normal TList, in order to enable the multi-select capability you must set a custom property on the item ENABLE_LIST_MULTISELECT to the string value 'true' e.g.
SET_CUSTOM_PROPERTY('PJC.MULTISELECT_LIST',1,'ENABLE_LIST_MULTISELECT','true');"
Francois

Oracle 10g :: APEX not running

Hi,
I have installed Oracle 10g in my pc with the default configuration.
First day of installation APEX client was running but now its not running.
Server is running correctly as I saw server processes in the Process Manager (Task Manager).
I am using a debian flavor of Linux.
Can anyone help me, How to find out why it's not running?
Thanks

Hi,
I tried to run those commands but none of them is working here. I am providing all the logs which generated while starting the Server.
Thanks
LOGS:
Mon Jun 4 19:52:28 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
The open() system call failed for the file /proc/self/exe
Linux Error: 13: Permission denied
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 83886080
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 285212672
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 188743680
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=9688
PSP0 started with pid=3, OS id=9690
MMAN started with pid=4, OS id=9692
DBW0 started with pid=5, OS id=9694
LGWR started with pid=6, OS id=9696
CKPT started with pid=7, OS id=9698
SMON started with pid=8, OS id=9700
RECO started with pid=9, OS id=9702
CJQ0 started with pid=10, OS id=9704
MMON started with pid=11, OS id=9706
MMNL started with pid=12, OS id=9708
Mon Jun 4 19:52:29 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jun 4 19:52:29 2007
ALTER DATABASE MOUNT
Mon Jun 4 19:52:33 2007
Setting recovery target incarnation to 2
Mon Jun 4 19:52:33 2007
Successful mount of redo thread 1, with mount id 2505516605
Mon Jun 4 19:52:33 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jun 4 19:52:33 2007
ALTER DATABASE OPEN
Mon Jun 4 19:52:33 2007
Thread 1 opened at log sequence 5
Current log# 2 seq# 5 mem# 0: /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/onlinelog/o1_mf_2_35gv5kcp_.log
Successful open of redo thread 1
Mon Jun 4 19:52:33 2007
SMON: enabling cache recovery
Mon Jun 4 19:52:34 2007
Successfully onlined Undo Tablespace 1.
Mon Jun 4 19:52:34 2007
SMON: enabling tx recovery
Mon Jun 4 19:52:34 2007
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=19, OS id=9724
Mon Jun 4 19:52:35 2007
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Jun 4 19:52:36 2007
Completed: ALTER DATABASE OPEN

Screen sharing and file sharing not working on LAN

This is not a Mavericks specific problem since it existed before I upgraded to Mavericks. I have a LAN that consists of 3 MBPs and 1 MacPro.
Local screen sharing and file sharing works fine on all of these computers except for one MBP. From this MBP I am able to connect to all of the other computers for screen sharing and file sharing. But I can't connect to this particular MBP for screen sharing or file sharing from any of the other Macs.
This MBP shows up in the left hand side column under "Shared" on all the other computers. But I am unable to make a connection from any computer to the problematic MBP. I get the message, "There was a problem connecting to the server "xxxxxxxx". The server may not exist or is unavailable at this time".
I have tried toggling off and on screen sharing and file sharing with no effect. One probably pertinent strange thing that I notice is that under the Screen Sharing set up the green button next to "Screen Sharing:On" is green. But the message under it states:
"Other users can access your computer's screen
at vnc://johnmacbookproretina/ or by looking for “John MacBook Pro” in the Finder sidebar."
The problem is that my computer name is "John MacBook Pro" and the LocalHostName is "JohnMBPr.local". I believe that at some point in the past the computer name and/or LocalHostName was "johnmacbookproretina".
Similiarly, under File Sharing I am informed:
"Other users can access shared folders on this computer, and administrators all volumes, at “afp://johnmacbookproretina” or “smb://johnmacbookproretina”."
I would appreciate any help I could get to resolve this perplexing issue. Thanks.
John

I've finally been able to solve my own problem.
File sharing and screen sharing on the problematic MBP was being blocked by firewall rules that had been set up several weeks ago when I had installed a trial version of DoorStop X firewall software. I had previously trashed the app when the 30 day trial ended. I did not realize that the software had left a set of firewall rules in the Library/StartupItems folder. Among other things, the rules were set to deny access to the computer on the ports used for file sharing and screen sharing. Once I trashed the DoorStopStartup folder in the StartUpItems folder all the connection problems resolved with a computer restart.

Oracle-xe apex not working on LAN

Similar Messages

Maybe you are looking for