5.1 Soundblaster not working, now LAN not working eith

Hi,
I'm new here, and would greatly appreciate any help anyone can give me. I've tried searching and looking through all the FAQ's I could find, but still am not able to find a solution.
I am running windows XP and I have a Soundblaster 5. card, and it's worked perfectly until last night. I had my headphones plugged in, and decided to plug in my Creative speakers instead. When I tried to plug the speakers in, soundcard appeared to be not working. I opened up my computer and took out the sound card and put it back in again, thinking I had maybe knocked it loose. I then went to check it under Windows device manager and it was listed as 'Multimedia Audio Controller" and said I had no drivers installed. I came here to the website, typed in the model number, got the correct drivers, but when I try to install the drivers, I get an error message saying that there is not a compatible device installed. I tried removing the card and putting it back in, also tried putting it into a different slot, but to no avail.
Now the biggest problem; after plugging my sound card in for the 4th time, my network connection stopped working. I'm connected to a LAN, and it keeps saying it's unable to renew my IP address. In device manager, it doesn't look like there's anything wrong with my network card.... could it be possible that I somehow fried the on-board network card when I was putting the sound card in?
I'm really at a loss as to what to do here. ANY suggestions at all would be GREATLY appreciated.
Thank you very much in advance.

Quote from: Chrysomya on 29-April-13, 20:14:26
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Your issue is drivers related.
For Windows 8 use 6.0.1.6839
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064

Similar Messages

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

[solved] Troubleshoot ssh with keys (works from LAN, not WAN)

I'm trying to set up ssh so that I can connect to my work computer from home. It is pretty much essential that I keep the work box as secure as possible at all times. (So I can't disable the firewall, come home and test it because IT would not be at all happy.)
I'm not sure if this is an Arch question, a Fedora question or a general Linux/networking question.
The work box is running Fedora 17. It has a firewall eerily like the "simple stateful firewall" described on Arch's wiki. It is running sshd. Public key authentication is enabled. No other form of authentication is enabled. It has a rule allowing ssh connections.
My laptop is running Arch. It has a firewall very like that described on the "simple stateful firewall" page. It has a couple of rules allowing stuff I need at home (printer and something I had to enable for the LAN).
Initially, I was given an internal ip address. I got this working fine i.e. I could ssh into the box from my laptop while sitting next to it in my office over the LAN. I'm using the default form of key pair generated on Arch (i.e. rsa) and am using gpg-agent with ssh support in lieu of ssh-agent to manage keys. Pin entry is using the qt front end as I'm on KDE. (I adapted KDE's config so that it starts gpg-agent with ssh support for the session so that I didn't end up with two instances.)
Once the firewall was in place and sshd was running, they gave me a public ip address. At this point, no port was opened in their firewall to allow WAN connections but I tested the public ip address from within the LAN and it once again worked fine.
Once I'd confirmed the machine could connect out after getting a public ip, they arranged for the port to be opened for ssh. However, I cannot connect to the machine from home.
$ ssh -vvi .ssh/id_rsa [email protected]
OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 22: Applying options for xxx.xxx.xxx.x
debug1: /etc/ssh/ssh_config line 32: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket "/home/username/.ssh/[email protected]:nn" does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to xxx.xxx.xxx.x [xxx.xxx.xxx.x] port nn.
debug1: connect to address xxx.xxx.xxx.x port nn: Connection timed out
ssh: connect to host xxx.xxx.xxx.x port nn: Connection timed out
xxx.xxx.xxx.x is the public ip (works fine from LAN)
nn is the port number
username is my user name (same on both machines)
The options for the host from ssh_config are:
AddressFamily inet
Compression yes
ControlMaster auto
ControlPath ~/.ssh/socket-%r@%h:%p
and the only generic option applied to all hosts is just a line to insist on protocol 2 which I think is default now anyway but I followed the wiki and specified it to be sure.
What have I missed? My networking knowledge is pretty basic at best. (I got this far using Arch's wiki, Fedora's documentation and a little trial and error. That seemed to work well but now I've added google and still can't figure it out. All the hits I get concern cases where the LAN connection works but authentication fails over WAN. But I'm not getting that far - it looks like my work box doesn't respond at all...)
Last edited by cfr (2012-09-25 22:12:06)

So I discovered I'd also managed to kill off LAN access as well as the machine's ability to use any sort of DNS... (I did say it needed to be secure...)
Anyway, I fixed that, reestablished working ssh from LAN but still can't get it to work from WAN.
Question: if ShieldsUp! reports the port as stealthed does that mean that the port has not actually been opened? So the campus firewall is blocking the connection? Because if so, I'm knocking my head against a brick (fire)wall to no purpose whatsoever...
I figure it can't be the software firewall else I'd not be able to connect on the LAN. And it is a public ip address so there's no NAT translation required...

Pull out my soundblaster card.. now it doesnt work? (pics included)

my soundblaster card was working fine. i had to change some sata cables in my computer and to get to it, i had to pull out the soundblaster card temporary. now the card doesnt produce any sound when i plug in my 3.5 headphone jack into it.
fatality logo lights up.. so far so good..
http://i.imgur.com/r1J6V.jpg
everything on my computer says the soundcard should be fine.... so i have no idea why it isnt working
http://i.imgur.com/du2tx.jpg
http://i.imgur.com/OMFMs.jpg
http://i.imgur.com/SITfI.jpg
last off topic question.. im not sure which one of these cables to plugin into my mobo.. (hd audio or ac 97). when i use the 3.5 jack thats located on the front of the computer. is it using onboard audio instead?
http://i.imgur.com/ctFad.jpg
thank you so much!
Attached Images
r1J6Vl.jpg
(44.9 KB, 5 views)

OMFMs.jpg shows a problem, actually. "High Definition Audio Device" is your onboard sound - not the X-Fi. It's showing both outputs for the onboard, but only the S/PDIF output for your X-Fi. This either means that it's not detecting that anything's plugged in and automatically suppressing itself or that it's simply not working. Right-click on the Playback control panel in the centre part and check that both Disabled and Disconnected devices are showing and check for the X-Fi's speaker output to see if its existance is even being acknowledged.
If nothing is showing, try reinstalling the drivers. Just the drivers - no need to bother with the rest of the software. You shouldn't need to uninstall anything, rather just install over the top of what's already there.
Currently your sound is being directed through your onboard audio. Ideally, unless there's a specific reason for you having both enabled, you should probably disable your onboard audio through BIOS, or at least the Device Manager, if you're exclusively using the X-Fi for audio.
As for your second question, you should be using the HD Audio plug. Electrically the two are compatible but there are extra features offered by the HD Audio setup which don't exist on the AC97 standard. However if you plug this into your motherboard than you will in fact be passing your onboard sound through to the front jacks, rather than your X-Fi's audio. Check your X-Fi card along the front and top edge - there should be a 10-pin (one missing) connector which also accepts the HD Audio plug, which will in turn feed your X-Fi through to the front jacks.

Had 1418 error.formatted as fat.not fat32.now ipod doesnt work.why?plz help

The iTunes keeps saying that:
"The iPod "IPOD" cannot be updated. The disk could not be read or written to"
"The iPod "IPOD" cannot be updated.
And when I tried to restore it.
"The iPod "IPOD" could not be restored. An unknown error occurred (1418)"
thats a dreaded problem and i researched at many forums on how to solve it.....
before reading ur reply....there were some other replies that i read.....
which told me to format my ipod into fat partition...and not fat32 partition....then we had to update it and then restoring it would be possible........
that was the only article which i came across and which had a solution to 1418 problem......
so i began my work....
but as soon as i formatted my ipod shuffle second generation into fat partition.......
i restarted my comp...and then.the ipod is no longer working.......
if i push it to on......then there is a constant green light on it which does not go off even if i connect it to comp. using the dock provided.......
if i put it off,the green light goes off....
ideally when an ipod shuffle is connected to pc..there is an orange light that starts blinking ,that shows that the ipod is being charged.
but now when i connect mine.....
the green light blinks only once......and then nothing happens...
the device isnt working and so i cant even solve my 1418 problem ,as now i even have the solution.......
help me plz....
its really urgent....
its been just a month my uncle gifted me this ipod ...he stays in north carolina........and i stay in india.....
i dont even know if there are service centres of apple available in mumbai.and if they are,whether they are trust worthy or the ipod that i send to them might never to me and get stolen or something.....somebody might just keep it and say that its lost.......mumbai is not trustworthy.
but if there is a recognized apple service centre then i would want to go there and get my ipod repaired....i have one-year warranty with me.......but i dont know if the warranty of a product bought in north carolina works in india......
i cant throw this ipod....cause its my first ipod and it has hardly been time that i got it...its too early for me to throw it.....
i dont know why the ****.....cant i connect it to the comp...
i tried the following: after getting 1418 read and write error...:
reinstalled the itunes 7.0.2
reinstalled the drivers......
reset the ipod shuffle...
restarted my computer several times.....
checked the cable....
plugged the usb cable onto another port...
scanned the comp for viruses......
now the only thing left is that i think.....there can be a problem with the jack where the dock is plugged.....
maybe thats the reason my ipod isnt working...
even if i formatted into fat partition rather than fat32 partition,it should atleast be connected......
should atleast charge.....
should atleast be detected......
my ipod is not even getting detected by the comp as any unknown device also.....forget as an ipod....
i just shouldnt have formatted it...
although i think....that formatting it did not lead to this problem......
please help me.......
urgently...........
plz.....
plz......send ur reply fast..plz help me.........
get this ipod to work......
i will fix the 1418 error myself....
just get this device to work....so that comp starts detecting that i have connected something thru usb.....

On top of the two suggestions already given, make sure that the drive letter being assigned to the ipod when you plug it in in windows is not also a drive letter being assigned to another drive. I've heard that this happens occasionally and can cause all kinds of conflicts, from problems you are describing to lockups when trying to sync.
I would also try it on a different computer to see if that helps. Maybe you've got a friend or a computer at work that you can install itunes on and give it a shot there. This will let you know whether it's a problem with your specific computer or if it's a problem with the ipod.
The fact that it runs in Windows and you were able to reformat the flash memory stick tells me that the Ipod is working, but that something on your computer is not.
P.S. Obviously you've had it for 90 days, So I must assume that the USB port is working correctly. Otherwise the Ipod's battery would have drained by now. So I don't believe it is a hardware issue. So move past that for right now and look to your computer's settings for the answer.

IChat used to work, now does not.. same chat partner even....

Ok, this is REALLY weird.
Some details-
Me Leopard 10.5.2
Firewall= iChat enabled
Quicktime= None (streaming band width)
Internet sharing OFF
Links sys wireless router WRT54GSV4
Enabled Both UDP/TCP on 5190, 5678, 16384-16403
Enabled UDP only on 5060
nothing set up for 5220, 5222 (jabber- dont use it)
nothing set up for 5297-5298 (internal communication, not needed to outside world for iChat)
Router running in gateway mode with udpnp enabled.
Router serving as DHCP server computer is always getting internal address of 192.168.1.101
Cable modem plugs into router and thats it for the network.
NO I DO NOT have 101 devices... we just started at 100 for IP assigning (we have 2 computers, 1 PC 1 MAC)
Now, sad story please read on and offer your help.
I WAS (past tense) able to chat with another family member in VT who is also running leopard and who is using a NetGear wireless router (known good for iChat) .
Here is the story, sorry it is long but I hope someone will spot what I missed if I give enough details.
Prior to december 21st I was using my setup (leopard see above) and was chatting (always VIDEO) with parents in MN as well as other relatives in VT (we live in UT). Both of these people were running tiger, both using netgear wireless routers (different ISP obviously). Had an issue chatting to the individual in VT at first, but changed their iChat preferences under accounts to use port 1080 for the aim oscar login (from 5190) and it worked every time from then out... good nuff...
So, I go to MN for Xmas and find out we cannot chat from their computer to the one in VT, both were tiger... turns out I was upgrading the MN computer to leopard for Xmas... so I upgrade and its still not working. I went into the net gear router and endabled TCP and UDP on ALL the ports I listed for my set up (ALL Of them, even the Jabber and "Internal" ports). I set up the leopard firewall to enable iChat and set the quick time etc etc... and whalla it worked to chat to VT, but only if we the same computer initiated the chat, i.e. had to be from MN (leopard)===> VT (tiger) (I THINK... **** wish I remembered this).
ANyhow, we did not care, it was a temporary thing (my wife wanted to chat with her sister) so those computers did not really need to chat much and it was good enough for us ....
Now... we fly back to our house (NO ONE WAS THERE i.e nothing changed on the computer) and now we cannot chat to VT (runing tiger) but we could 8 days ago. So, I looked into the error messages... it initiates, starts and then ends the chats with an error -7 message and later yeilds an error -8. I know the -7 can be a time out so I check our true speed and found at least 1Mbps both here and in VT. I figured maybe a security update changed something either in leopard or tiger, so I carefully configured my firewall, quicktime, and router (as well, no one is internet sharing) and everything else I could think of (even switched off DHCP for a while) to NO avail. After all this I confirmed (1 minute ago) that I CAN chat back to MN which is now upgraded to leopard with the NetGear wireless router and all the ports open etc etc...
The computer in VT has the usual set up with the 10.4 firewall ports enabled according to the Apple SOP (read the document in apple support if you need to know what this looks like). It also is not internet sharing, its quicktime is enabled and the et gear router appears appropriately configured with TCP and UDP enabled on ALL the ports I listed under my set up (ALL OF THEM just in case)
I have tried enabling ALL of the ports (i.e. the jaber and internal ports.. but this is pretty stupid on my end since I am using LEOPARD and it only requires a single port to chat (starts at 16384 and goes up to 16403 until it finds one open), but I was not sure what happens with a leopard - tiger iChat so I tried it, still broken.
One potential clue (or a red herring?). My sister-in-law HAS to use port 1080 for the AIM login, if she tries 5190 she gets kicked of AIM immediately (YES her firewall is configured to let that out as well as the portforward (TCP and UDP) is configured on the netgear wireless router. This seems strange to me and I almost want to call her and double triple check that she has all this correct.. but IT WORKED 8 days ago (we used it literally 3-4 + days a week, it working was NOT a fluke).
Anyhow, sorry for the book. Any and all help appreciated I have tried to do my homework but am now stumped and hope I did not miss anything super obvious.
me
SO. . . .
What changed?
What is left to "fix" and most important
Who broke this so I can hunt them down (just kidding)... but seriously, what gives. Am I missing something OBVIOUS... like apple said we broke tiger too leopard chats and you have to buy leopard or something else reminiscent of the iPhone story (sorry, inappropriate jab, I just beat myself).

Ok- obviously I was tired and did not communicate.
Here is the simplified problem.
We live in UT, my parents live in MN, my wifes sister and parents live in VT.
3 computers
UT= 10.5.1 iMac silver case new computer purchased with 10.5.0 and IMMEDIATELY upgraded to 10.5.1 prior to running a single app. LinkSys wireless running in gateway mode.
VT= Leopard iMac core duo white (last years) with NetGear wireless adapter
MN= Leopard iMac core duo white (last years) with NetGear wireless adapter
This is how it was prior to Christmas
WE left UT and flew to MN where one of the iMacs lives. We were able to (FINALLY) chat with the VT iMAC (still running leopard) after UPRGADING the MN iMAC to Leopard version 10.5.1 and making some changes to the router and Mac Firewall as well as quicktime streaming settings. Then the chat would work from MN-VT.
We FLEW home to UT, where our leopard iMac had been sitting gathering dust for 8 days. It no longer can chat with VT, but it can chat perfectly well with the MN computer, which of course is now running leopard 10.5.1
So- I can assure you nothing changed on my computer while I was sitting in MN eating Xmas dinner and the computer sat in an empty house in Utah. Nothing, I am told, changed on the computer in VT.. and I can still chat to MN
I tried to mark my replies with an asterics, strangely they are in the message when I try to edit it but I do not see them all in the post... so if you see them great... if not you will have to read to find my replies... sorry.
OK Solution(s)
Get all the routers set to do UPnP
*all ready there
On the Linksys this is in Adminstration.
Disable then Delete all the Port Forwarding you have set and Save Settings.
* this seems strange most iChat communication help messages start with the individual being told to put this in place. Tell me why this should be done, I am curious what you think is the issue here.
In the Netgears it (UPnP) should be in it's Own menu.
Delete (As there is no Disable) the Port Forwarding settings.
Save settings
* Again, I will try this since it obviously did not solve the problem but again, I am curious what you think the core issue is here.
In the Linksys go to the Security page and Disable the Anonymous Ping Blocking
Save Settings.
*No anonymous ping blocking setting there... but I disabled the filter anonymous requests line.
In the Netgear go the WAN pages and Disable the Dos (or SPI) line. It is a Check to Do this.
Also check the Box to Respond to Pings on the WAN port
Save Settings
Yes it is a good idea on the Tiger computers to have the Firewall On and the ports set.
TCP 5190, 5220, 5222, 5223, 5298
UDP 5060, 5190, 5297, 5298, 5353, 5678 16384-16403
(this will include the ports from Leopard machines)
http://docs.info.apple.com/article.html?artnum=93208
*Yes, I concur with your statement, this is why I told everyone this is what I have set up, its in the apple recommendations for iChat.
It is better that the Leopard Firewall is On and set to Allow Specific apps ans services.
If set before the 10.5.1 Update then delete the apps in the list.
Set to Allow All.
The set to Allow Specifics and re-add apps
This is because of a problem with the 10.5 firewall and settings being held over.
*not an issue, computer purchased with 10.5.0 and immediately upgraded but I all ready tried this anyhow, and its not the fix.
The port iChat uses to Login for the AIM server can be changed when not logged into AIM.
WE suggest port 443 as it is also used for Secure mail. In Tiger it means the port is likely to be open in the firewall for another app and not need setting.
*Great, that makes sense, thanks for your informative response.. I like to know why I am doing things, it makes me that much better fixing my own issues. Seriously
In Leopard the firewall works by Application and it will open any port the app uses. (it gets a"certificate" from the firewall).
* I sorta figured it worked this way or in some similar fashion when I configured it to allow iChat, this again makes sense but it is all ready in place.
In fact it is possible to log in to the AIM server on virtually any port.
*OK, for another time but is this relevant... why is it that the VT computer can log into AIM using 1080 but NOT 5190.. odd.. anyhow no need to reply if this is not relevant to me being unable to chat to VT but if you consider it worth pursuing let me know.
Some find for Tiger/iChat 3 that separating the UDP and TCP bits of port 5190 helps
*I will check this on her MAC firewall settings over the phone.
I think I have got most of this.
*My bad, it was a rather confusing post.. I hope I clarified
Thanks for you help so far.
Basically simplify things in the routers first.
Then recheck your Leopard settings as
1) you have miss-named them
2) possibly referred to other places
3) have not mentioned half of them.
Which other half would you be interested in?
I am making the changes and will reconfirm everything above and post my chat status... working with computers now.
Message was edited by: Rufessor

HT4157 My iPad. Oonnects to other wifi it used to connect to my work wifi but it will. Not connect now what is work I am connected with my iPhone but iPad will. Not connect or it says safari can not open page

I can connect my iPhone to my work wifi but when I try to connect my IPad it will not connect. It says safari can not open page. What's up with that I have used IPad connected to work wifi before

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Disconnected ipod when said DO NOT DISCONNECT, now its not working. help?

I was in a rush and I disconnected the ipod from the dock (which is connected to the computer via the USB cord) even though the ipod had the red circle with the line through it saying “DO NOT DISCONNECT”. When I tried to use it afterwards, the screen was frozen with the “DO NOT DISCONNECT” screen blinking. I couldn’t even turn the ipod off. The battery ran out, and the ipod did eventually shut off a few hours later. When I then plugged it in to the roadtrip in my car to try and recharge it, the black and white apple screen appeared for a few seconds, then a screen with a sad ipod face and an exclamation point appeared with www.apple.com/support/ipod underneath it.
When I got home, I plugged the ipod into the dock again, but itunes did not recognize that the ipod was plugged it. But when it was plugged into the dock, on the ipod screen there was a picture of a battery with a lightning bolt on the left side of it and a small part of the left side of the battery was filled in black. It did not blink or anything.
I read online a few things I could try and I did try resetting the ipod, but it didn’t work, it just showed the black and white apple, then the www.apple.com/support/ipod screen. I even tried pressing the Select and Play button, and nothing happened. I also uninstalled/reinstalled itunes, but that didn't work. and since itunes won't recognize that the ipod is plugged in, i don't know what else to do.
My computer does not even recognize that the ipod is plugged in either since nothing shows under “My Computer” regarding the ipod.
hopefully, someone can help. if not, what do i do? can i send it in? if so how long does that take and how much does that cost?
i'm kicking myself now for being so stupid!
Jen
iPod Photo 60 GB Windows XP

I had this same problem but it ended up that my computer wouldnt do anything with my ipod. Load songs or anyhitng. I had to go next door to my neighbors and use there computer. Try it on another computer and if it still deosnt work try calling apple.

PC to OSX Server works on LAN, not on WAN, Mac works on both

So the subject pretty much says it. I've got VPN set up, my macbook pro can connect on LAN and WAN. My PCs can connect on LAN, but it times out over WAN.
Thoughts?

There are reports of VPN issues with AEBS devices around the forums, including some reports with the just-released 7.5.2 firmware. I don't run that configuration, so I'm not in a position to replicate that here. ([Here is an old thread|http://discussions.apple.com/thread.jspa?messageID=4046689], and also see [here|http://discussions.apple.com/thread.jspa?threadID=2312455].)
Make sure your Windows (XP?) VPN is configured for NAT traversal. IIRC, that's not the default for the Windows VPNs, and Microsoft had some notes published on setting up VPNs from Windows. (I don't have a Windows box handy to test.) That's what port 4500 is for.
Try both PPTP and L2TP, too. (You have both open, so try both paths.) Ensure the server is set for both PPTP and L2TP, too.
The AEBS are good home WiFi routers and can serve admirably as wireless access points (APs; what Apple calls "bridge mode"), but they're not particularly intended as gateway devices for servers. I'd generally recommend getting yourself a VPN-capable server-grade network gateway, as that gets NAT out of the equation entirely, and it means you can connect to the LAN without needing the server to be functioning, and it means the server isn't fielding and processing and rejecting any (unauthorized) VPN connection traffic that might arrive.

Photosmart C7280 was installed & working - now will not install - URGENT solution needed

All in one was working fine. Is on Network. Dell Workstation is wired and so is all in one. Other computers are laptops - wireless working fine. For an unexplained reason the software on the Dell stopped working - fax, scan, etc. But it would print but gave error messages. So I uninstalled it and downloaded the latest software from theHP website. First time trid to install - error message in the checking process - second part and uninstalled and did a check of the hP site but timed out. rebooted. Tried again after downloading from HP again. THis time it got to the install stage but once again an error. repeat process and this time downloaded a solution. Followed the steps in the solution - msconfig including firewall, rebooting, etc. Unsuccessful again. Now have no printer on Dell and need to have it working as I have assessment taskc due on weekend and can't print them. Need solution to solve this issue.

When you said you try to download it from the website. Did you click INSTALL on the driver or did you download and save it first on your computer? You may want to try and download and save it on the desktop. Once download is complete, manually start the installation by double clicking it on your desktop.
Aside from that, try to install just the drivers?
So when you're installing the driver/software, it will give you a screen where you can check the box for the user license agreement right? and above that is a 4 link that would say: Internet Connection Usage, Select a software (can't remember the rest of the two options) Click on the internet connection usage and choose the following options:
-First question: NO, I'll do it myself
-Second question: NO, thank you
-Press OK to go back to the main screen
This time, click on the SELECT A SOFTWARE TO INSTALL
-Uncheck everything. except the very top of the list which is grayed out; That's the driver of the printer
-There might be other software installed on your pc already that would say "already installed" you can ignore that since it will be grayed out. You need to uncheck those things that you can uncheck.
-Click Ok to go back to main screen.
-Proceed with the installation.
I hope that works for you.
---Click KUDOS if you want to say THANKS.

Ctd's randomly; used to say it was running when it was not, but now will not even open.

have been using firefox for at least 2 years. only recently[past 2-3 months] has it become fatally ill. closes with absolute randomness. does not ask if i want to report anything.
and now, the program will not open. no message. no report.
just no open!

Several things to try:
When you signed in with your new apple id, did you select "create new" or "use existing"? Sounds like you may have selected create new because you are having to select your country. It should be use existing because you've already created a new apple id and you want to use that existing one.
If that's not it:
Did you restart itunes on your phone? Double tap on your home button, tap on the circled x at the top left of itunes store icon, tap on home button, tap on itunes store again.
And, if all else fails:
In general, problems with iTunes account (apple id) should be resolved by iTunes. Go to http://www.apple.com/support/itunes/ and see if items under account and billing can help you or, if nothing there fits, click on the contact us near the bottom left.
Good luck

'Connection Error' Sample RTMP video used to work, now no longer works?!

Hello All,
I had FMS 3.5 developer package installed on my server installed about a month ago. I used to be able to go to the /webroot/ page to see the sample RTMP video play and it worked great. Today, I go to view that page and find that it no longer plays. I get "Connection Error. Please preee Play to try again."
Pressing the play button does nothing, so I click the RTMP thumbnail and it reloads ony to give me that same error again.
I can click the HTTP thumbnail and see the video play just fine. But, I want RTMP and after over an hour on the phone with my managed hosting tech, we can't find anything wrong.
Here's the thing: I haven't done anything, I have not changed anything, I have not manipulated the server software whatsoever. It just stopped working and gives me "Connection Error."
I checked that port 1935 was open, and it is.
UPDATED:
When I click on the RTMP thumbnail, after the 'Connection Error' message comes up in the player, the following things happen in my server's error log:
"File does not exist: /folder/folder/folder/fcs"
"File does not exist: /folder/folder/folder/open"
The corresponding IP is my own.
The /folder/folder/folder/ corresponds to my public_http folder and related file structure for the website, NOT the RTMP server. I have no idea why the F
MS is looking in my public_http for fcs and open, but it is.
Thoughts?
Please help? Many thanks in advance!
Sincerely,
wordman

SE,
I'm logged on using PuTTY, my server is Linux and I did in fact get to view the log files.
I realize the sample page ought to be discarded as a concern, but I was hoping I might learn something from this.
I don't have the knowledge to try another RTMP player/client, I am brand new to this. I have Flash CS4 Professional, but I need to learn what to do to build a .SWF to play a sample file.
As for player development, I have been doing research on which might be best for me. In the short term I just need a basic player. In the long term, a player with insertable banners (for in-house promotion and identifiaction, not for ads) and a chat function. The banners may not be necessary as I want the player to be located in a stand-alone page as opposed to a pop-up, so I can do banners in the page itself.
I have looked into REOPS and Strobe, but the tech is written in engineer-speak so most of it is zooming right over my head. I'm self-taught with PHP so I know this all can't be THAT difficult. The jumping-off point is hard to find though. I need something in human-speak that's a wee easier to understand. A basic player would be lovely right now. I don't even care about skinning, just colors.
Using the command to check if FMS is running leaves me with 4 lines of info: 5-digit number, ? 00:00:00 fmsmaster (fmsedge, fmscore, fmsadmin)
Does that mean it isn't running? If so, what can I do to restart it and worse, why would it have stopped?
Thanks for your help!
Sincerely,
wordman

I switched to iphone 5 from my 4s becuase it didnt work now iphone 5 doesnt either and ive only had it for 3 days.

when i had the iphone 4s my data such as followers and stuff would get deleted in instagram,twitter,snapchat, etc. it would log me out and not recgnixe my password so i had to change password and when i logged back in everything was deleted like if it was a brand new account. i went to the apple store and they didnt fix it. so i got the iphone and i even used a different email but it happened again. i dont know what to do!! nobody in my family that has an iphone has this problem. im getting so frustrated!!

Sounds like user error, if it's happening just to you and with completely different phones. How have you attempted to troubleshoot? Have you read through the User Guide to make sure you're actually setting up your phone properly? Did you set up your new iPhone from a backup of your 4S? If you did, you just retored all of the 4S problems onto your new phone.

Satelite Pro L20 - LAN Not working after OS re-install

I have just recently replaced my hard drive and I used the product recovery disk etc.
WXP loaded perfectly and now my wired LAN does not seem to want to work. All it is giving me a limited or no connectivity.
I have tried to uninstall and re-install the drivers, manually enter the IP settings and still nothing will work.
I wondered if anyone else has had this issue before and could offer me any advice.
Many thanks in advance
M8KWR

Maybe you should check your settings at your router. Maybe some wrong DNS,Subnetmask, etc.
Did you already checked the cable?? Perhaps the cable is malfunctioning. Just cross-check it with another cable.
Would appreciate to get some feedback from you.
By the way, which operating system do you use?
Greetings

5.1 Soundblaster not working, now LAN not working eith

Similar Messages

Maybe you are looking for