OracleJSP exception in JDeveloper debug mode

Hi all.
I have a strange problem. Only one JSP in my entire application fails to appear when I debug with local (embeded) OC4J. These are the first lines of the exception message:
Exception:
java.lang.NoClassDefFoundError: _addFile
java.lang.Class java.lang.ClassLoader.defineClass0(java.lang.String, byte[], int, int, java.security.ProtectionDomain)
native code
The class _addFile is generated from addFile.jsp and is available in the output directory. Production application doesn't display the same behavior, this only happens in DEBUG mode in JDeveloper.
OS: win2000
JDK: 1.3.1
JDevaloper is 9.0.2.. something.
Struts
Thanks people.

A few quick questions:
1. Can you run (not debug) the application?
2. Have you tried specifically compiling the file addfile.jsp in JDeveloper? - This will usually show the error before attempting to
run it.
To do this, select the file in the navigator and do a right-click Rebuild or Make..

Similar Messages

NoClassDefFoundError: in JDeveloper debug mode

Hi all.
I have a strange problem. Only one JSP in my entire application fails to appear when I debug with local (embeded) OC4J. These are the first lines of the exception message:
Exception:
java.lang.NoClassDefFoundError: _addFile
java.lang.Class java.lang.ClassLoader.defineClass0(java.lang.String, byte[], int, int, java.security.ProtectionDomain)
native code
The class _addFile is generated from addFile.jsp and is available in the output directory. Production application doesn't display the same behavior, this only happens in DEBUG mode in JDeveloper.
OS: win2000
JDK: 1.3.1
JDevaloper is 9.0.2.. something.
Thanks people.

A few quick questions:
1. Can you run (not debug) the application?
2. Have you tried specifically compiling the file addfile.jsp in JDeveloper? - This will usually show the error before attempting to
run it.
To do this, select the file in the navigator and do a right-click Rebuild or Make..

JDeveloper 11.1.2.1.0 Hangs in Debug Mode Running in Windows 7 OS

Hi All,
i am working with JDeveloper 11.1.2.1.0 version,intel core i3 -2120 CPU,@3.30GHZ,4GB RAM, Windows 7 32 bit OS
i am facing Jdeveloper Hangingness when loading BTF inside a popup and making a call to java code on any action if any debug point is avilable inside java file,JDeveloper is getting hanged and the only way to come out of this issue is by killing the process and restarting the JDeveloper.
certain cases when integrated server is started with debug mode(intial startup ) also Jdeveloper is getting hanged and there is no way to get out of this except restart.
if i see memory parameters from Java VisualVM console
Heap is avilable
and the other process are running with out any issue.
is this problem is with configuration settigns ?
what steps/settings/patches i need to follow to get out of this problem ?

is this happening after removing the system folder also?

Running applications in debug mode in JDeveloper

Hi All,
I have created a simple spring portlet and have consumed it on a webcenter application. The portlet throws an exception. Now I want to run my portlet in debug mode.
Both webcenter application and portlet producer are running on the jdeveloper integrated server.
Can any one help me out mentioning steps to run the portlet and the portal app in debug mode.

Some info can be found in this thread in JDev forum: JDeveloper remote debugging OC4J
However, it is based on 10g and OC4J. Still, I believe, the overall concept can be used.

Jdeveloper not working in debug mode

Hi,
I have installed J2SE1.4.2 and Jdeveloper 10g. But when i started to run the Jdeveloper in debug mode, its is giving "ERROR
The requested URL could not be retrieved" connection failed arror.
What could be the reason??
Pls help.

Hi
I think the onus is on you to debugg the code and deduce why it is displaying that error.
regards
Isaac Prince

Help on Debug Mode in Oracle JDeveloper 10g/OC4J

Hi All,
     Presently I am using Oracle JDeveloper 10g Early Access version
          ADF Business Components     10.1.3.34.12
          Java™ Platform          1.5.0_05
          Oracle IDE               10.1.3.34.12
          PMD               JDeveloper Extension 1.7
          and OC4J.
I want to debug all the Java files between request submission and getting response from the server in j2ee application. This we can do in eclipse ide by putting break points where ever we require and running the server in debugging mode. But I don't know how this can be done in JDeveloper/OC4J. Please can any one of you guide me, if you are aware of it. Thanks in advance.
-immu

If you mean remote debugging the application on a stand alone OC4J then here is a basic how-to:
http://blogs.oracle.com/shay/2005/10/24#a55
This is also covered in the online help.

Regarding Exception in Debug mode.

Hi All,
when i am starting Debugger,
it is giving an error like:-
Exception occured during creating launch configuration tabd.
reason:-No tab group define for launch configuration type com.sap.ide.webdynpro.projecrbrowser..launch.configtype.debug
Any idea?
how to correct it?

Hi, 
Did you check in your plug ins first if that com.sap.ide.webdynpro.projecrbrowser is avail or not. 
how to check this? 
Otherwise in technically server mode should be in debug mode and launch your application in debug mode I Mean to say go run-debug-create new web dynpro application and select your project and webdynpro application and checked the create and deploy the archive and click on run then it will wok 
The server mode is ON. While launching my application in debug mode, i am getting this message. it won't allow to create or edit configuration

How to set debug mode in jdeveloper for SOA Suite

Hello,
Is possible to use jdeveloper, soa suite and debug mode? I can debug my web application with oc4j embendded server. But when i want to deploy on oracle application server and debug, doesnt work.
How can i fix that?
I saw that tutorials for jdeveloper and weblogic server, but not for oracle server.

see :
http://weblogs.asp.net/gsusx/archive/2006/06/01/WS_2D00_Addressing-interoperability-between-Oracle-BPEL-Process-Manager-and-Microsoft-Windows-Communication-Foundation.aspx
http://dlimiter.wordpress.com/2009/11/16/manipulating-ws-addressing-headers-in-oracle-bpel/
on how to populate the ws-addressing elements yourself
basically you need to add the ws-addressing xsd, create a new variable of it, populate the elements and add it to your partnerlink

Bad pointer exception in Debug mode.. CView in CDockable pane MFC Feature pack

Hi
I have attached a CView in CDockablePane and it works fine
in Release mode but it throws bad memory pointer in
debug mode while closing the application.(Crashing during close).
Please advise...
Find the code below how I had attached the View to Dockable pane
//===================================================
BOOL COutputWnd::AddView ( CRuntimeClass *pRuntimeViewClass, LPCTSTR lpcszTitle, int nIconIndex,int nTabIndex )
if ( !pRuntimeViewClass )
return FALSE;
int nTabIndex = 0;
CWnd *pWnd = NULL;
CCreateContext newContext;
CTestView *pView = NULL;
newContext.m_pCurrentDoc = NULL;
newContext.m_pNewViewClass = pRuntimeViewClass;
newContext.m_pNewDocTemplate = NULL;
TRY
pWnd = ( CWnd* ) pRuntimeViewClass->CreateObject ( );
if ( NULL == pWnd )
AfxThrowMemoryException ( );
CATCH_ALL ( e )
TRACE0 ( "Out of memory creating a view\n" );
return FALSE;
END_CATCH_ALL
if ( !pWnd->Create ( NULL, NULL, WS_CHILD | WS_VISIBLE | WS_CLIPCHILDREN | WS_CLIPSIBLINGS, CRect ( 0, 0, 0, 0 ), &m_wndTabs, AFX_IDW_PANE_FIRST + nTabIndex, NULL ) )
TRACE0 ( "Create view failed\n" );
return FALSE;
m_wndTabs.AddTab( pWnd, _T("Browser Tab"), (UINT)m_wndTabs.GetTabsNum());
pWnd->SendMessage ( WM_INITIALUPDATE );
pWnd->SetOwner ( this );
pView = ( CTestView* ) pWnd;
if ( NULL != pView )
pView->Navigate2 ( lpcszTitle );
return TRUE;
}//===================================================
Thanks
Shajeer

Hi
I am calling the AddView from OnCreate of COutputWnd as below
int COutputWnd::OnCreate(LPCREATESTRUCT lpCreateStruct){
if (CDockablePane::OnCreate(lpCreateStruct) == -1) return -1;
m_Font.CreateStockObject(DEFAULT_GUI_FONT);
CRect rectDummy;
rectDummy.SetRectEmpty();
// Create tabs window:
if (!m_wndTabs.Create(CMFCTabCtrl::STYLE_FLAT, rectDummy, this, 1)){
TRACE0("Failed to create output tab window\n");
return -1; // fail to create}
AddView( RUNTIME_CLASS(CBrowserView),_T("www.google.com"),-1,0);
return 0;
Find below the call stack when it crashes
Bad_Pointer.exe!AfxAssertValidObject(const CObject * pOb=0x00b7e838, const char * lpszFileName=0x014c58c8, int nLine=2372) Line 99 + 0xa bytes C++
  Bad_Pointer.exe!CFrameWnd::AssertValid() Line 2373 C++
  Bad_Pointer.exe!CMDIFrameWnd::AssertValid() Line 384 C++
  Bad_Pointer.exe!CMainFrame::AssertValid() Line 271 C++
  Bad_Pointer.exe!AfxAssertValidObject(const CObject * pOb=0x00b70068, const char * lpszFileName=0x014d5404, int nLine=288) Line 107 C++
  Bad_Pointer.exe!CBasePane::GetParentMiniFrame(int bNoAssert=0) Line 291 C++
  Bad_Pointer.exe!CDockablePane::OnDestroy() Line 2579 + 0x12 bytes C++
  Bad_Pointer.exe!CTabbedPane::OnDestroy() Line 215 C++
  Bad_Pointer.exe!CWnd::OnWndMsg(unsigned int message=2, unsigned int wParam=0, long lParam=0, long * pResult=0x001ae47c) Line 2042 C++
  Bad_Pointer.exe!CWnd::WindowProc(unsigned int message=2, unsigned int wParam=0, long lParam=0) Line 1755 + 0x20 bytes C++
  Bad_Pointer.exe!CBasePane::WindowProc(unsigned int message=2, unsigned int wParam=0, long lParam=0) Line 1011 + 0x14 bytes C++
  Bad_Pointer.exe!AfxCallWndProc(CWnd * pWnd=0x00b90af0, HWND__ * hWnd=0x000114d8, unsigned int nMsg=2, unsigned int wParam=0, long lParam=0) Line 240 + 0x1c bytes C++
  Bad_Pointer.exe!AfxWndProc(HWND__ * hWnd=0x000114d8, unsigned int nMsg=2, unsigned int wParam=0, long lParam=0) Line 403 C++
  user32.dll!7787f8d2()
  [Frames below may be incorrect and/or missing, no symbols loaded for user32.dll]
  user32.dll!7787f794()
  user32.dll!7787f73d()
  user32.dll!77880817()
  user32.dll!77880a65()
  ntdll.dll!776f99ce()
  user32.dll!778714c8()
  Bad_Pointer.exe!CMDIFrameWndEx::OnDestroy() Line 777 C++
  90909090()
Thanks!
Shaj

Debug mode for Oracle JSP compiler?

I deploy a web application in an EAR file to Oracle 9iAS 9.0.3 through Oracle Enterprise Manager. Now during the deployment of the EAR file I get an error:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message.
But I already added this parameter manually to the "oracle.jsp.runtimev2.JspServlet" in "global-web-application.xml" (as suggested by http://otn.oracle.com/tech/java/oc4j/doc_library/902/jsp/getstart.htm#1005625). Also, when I check out the "JSP Container Attributes" in the "Administration" settings of my OC4J, "Debug Mode:" is set to "Yes" as well.
So how do I need to configure my OC4J to print the full JSP compilation error message?

Please try Oracle9iAS Release 2 Containers for J2EE - Logging and Debugging at http://otn.oracle.com/tech/java/oc4j/htdocs/oc4j-logging-debugging-technote.html.
Hope that helps.

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Problem with Debug mode and SLD

Using the config tool, we have turned the Debuggable flag to 'yes' and set the Debug mode to OFF. Now from the studio, when I enable debugging for the process, the server0 stops successfully and restarts successfully. However, during the restart, the SLD service errors out and does not get started. It encounters the following exception. I can verify the error in std_server0.out
With erred SLD service, when I try to deploy and run the webdynpro application from studio, the deploy fails with the same exception.
We tried all kinds of restart (of the engine\server instance), debuggable and debug mode setting permutations, but not successfull. (debug port is 50021)
We are having remote debug server setup (not local).
Does anybody have any suggestions???
The exception we get is:
Finished with warnings: development component 'CreateOrder'/'local'/'LOKAL'/'0.2007.11.26.14.33.54':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application local/CreateOrder and wait. Reason: Clusterwide execption: server ID 3775750:<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)

Hi Michael,
one way is to enhance the server go.bat with debug parameters. Under c:\usr\sap\<SID>\j2ee\<INSTANCE>\cluster\server\go.bat define the following params
set DEBUG_PORT=5000
set DEBUG_PARAMS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=
and add both params to the java arguments (e.g. behind the -classpath): %DEBUG_PARAMS%%DEBUG_PORT%.
Regards,
Stefan

ABAP Runtime error in debug mode

Hi all,
I am facing foll. run time error in debug mode
Runtime Error          DBIF_RSQL_INVALID_CURSOR
Except.                CX_SY_OPEN_SQL_DB
Possible causes in the application program:
Within a loop (SELECT/LOOP/EXEC SQL), one of the following
statements is used:
- MESSAGE (apart from MESSAGE S...)
- COMMIT WORK
- ROLLBACK WORK
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
- BREAK-POINT
- WAIT
In debugging mode, a program sometimes triggers
a "COMMIT WORK" during the database selection. As a result
this termination may also occur in debugging mode with a correct
program.
A "COMMIT WORK" during debugging may be due to the following reason
1. A program or screen was regenerated
   and updated in the database.
2. Each user needs a private process in debugging mode, but
   the number of available processes is restricted. If this
   limit is exceeded, each debugging step then requires a
   "COMMIT WORK".
its urgent.
if i run the prg directly to tcode der is not ne error.
but i want to execute the prg. in the debug mode.
its a ZPRG.
with regards,
Purva.

hi,
You need to change your logic.
Then , i hope your problem wil be solved.
Because of nested select statements, you are getting that error.
Declare seperate Internal tables for VBRK,VBRP, KNA!,j_1iexchdr, j_1imtchid.
Declare Itab_final with all required fields from all tables.
Dont use select-endselect anywhere.
I am giving Pseudo code here.
Try to use this logic.
I used question mark in code : there you need to use ur required field names.
Hope it wil help you.
select vbeln kunrg zterm bukrs knumv netwr kunrg from vbrk into corresponding fields of table itab1
where vbeln = docno.
select matnr posnr arktx fkimg meins netwr werks aubel from vbrp into corresponding fields of table itab2 for all entries in itab1
where vbeln = itab-vbeln.
select name1 stras pstlz ort01 land1 from kna1 into corresponding fields of table itab3 for all entries in itab1
where kunnr = itab1-kunrg.
select preprn exdat docno from j_1iexchdr into corresponding fields of table itab4 for all entries in itab1
where rdoc = itab1-vbeln.
select j_1ichid from j_1imtchid into corresponding fields of table itab5 for all entries in itab2
where matnr = itab2-matnr.
Loop at itab1 into wa_itab1.
read table itab2 into wa_itab2 index sy-tabix.
read table itab3 into wa_itab2 index sy-tabix.
read table itab4 into wa_itab2 index sy-tabix.
read table itab5 into wa_itab2 index sy-tabix.
itab_final = itab1-?
itab_final = itab1-?
itab_final = itab2-?
itab_final = itab3-?
itab_final = itab4-?
itab_final = itab5-?
append itab.
endloop.
select eikto from knb1 into table wa_knb1
where kunnr = itab_fianl-kunrg
and bukrs = itab-bukrs.
select kawrt kbetr kwert kschl kposn knumv from konv into corresponding fields of wa_konv
where knumv = itab_fianl-knumv
and kposn = itab_final-posnr.
append wa_konv.
endselect.
Regards
Sandeep Reddy

Restart the server in debug mode: How to drop saved passwords?

In NWDS server pane, I entered a wrong password when trying to restart my SAP AS Java in debug mode. Now I only get exceptions "com.sap.enginemanagement.UnauthorizedException: Incorrect login information provided" without a chance of changing the entered credentials. Restarting NWDS didn't work.
Any ideas?
Thx,
Christoph

Hi Christoph,
are you talking about the "Java EE" perspective and the "Servers" view within it? I tried it out and it does not behave properly.
Try the "SAP Management" perspective. Within the left hand tree open your system, expand the instance starting with "J..", expand the "AS Java" node and select the "Process Table" node. In the right hand table select the server0 process and chose from the context menu "Start Debug Session".
The SAP JVM offers some extra debug options. Expand the "Expert Mode" in the modal dialog. If you want to debug web applications select "code isolation" and unselect all other options. A password dialog will appear and you must enter the credentials for the operating system user, not for the AS Java administrator.
One table column is labeled "Debug", there you can see the currrent debug port.
Either you start now a "Remote Java Application Debug" debug session or you have a Java EE project and can create a "SAP Application" debug session.
Anyway to see your application threads in the debugger you have to access your web application with a special debug URL.
If your URL looks like this: "http://localhost:50000/myapp" you have to insert a debug token beween host part and the path and the URL becomes "http://localhost:50000/@@@DEBUG@@@/myapp". If you miss to modify the URL you will not see any thread.
If you want to get a "normal" debug behaviour just deselect all options in the debug dialog. You will see all threads, you do not have to modify your URL, but the server will restart after you detached the debugger.
Hope this helps.
Best Regards, Stefan
Edited by: Stefan Bodenstein on Oct 1, 2008 12:00 PM

Finding Events in debug mode?

Dear All,
I found a list of events which will be used for the transaction EA10 by the method mentioned in the video.
http://www.sap-isu.net/video/fica-events.
Out of the many events which are triggerred one of them is R431.
Right now the function module in this has no code . Accept the function start and end syntax.
When I try to put the breakpoint in this and run the transaction in the debugging mode , the flow of the program doesnt stop at the debug point.
Why such analomy?
Edited by: Rahul_paldiwal on Jan 6, 2010 11:30 AM

Hi,
If you go to the code of program LE21AF08. You will see that program will not go to the code if the function module is 'ISU_SAMPLE_R431'.
FORM event_r431 TABLES p_contrcl STRUCTURE t_contrcl
 CHANGING p_iiu TYPE isu21_invoice_unit
 p_param TYPE isu21_invoice_param.
PERFORM get_user_exit_function USING 'R431'.
REFRESH: t_vkk_doc_id.
LOOP AT t_fbstab WHERE funcc NE 'ISU_SAMPLE_R431'.
 t_vkk_doc_id = p_iiu-t_vkk_doc_id.
 wa_t_bill_doc = p_iiu-t_bill_doc.
 CALL FUNCTION t_fbstab-funcc
 EXPORTING
 x_printdoc = p_iiu-print_doc
 x_bldat = p_param-bldat
 x_budat = p_param-budat
 x_bupa = p_iiu-bupa
 x_fkkvkp = p_iiu-acc-fkkvkp
 TABLES
 t_contrcl = p_contrcl
 t_bill_doc = wa_t_bill_doc
 t_vkk_doc_id = t_vkk_doc_id
 EXCEPTIONS
 error_message = 1.
 IF sy-subrc <> 0.
 mac_msg_putx co_msg_error sy-msgno sy-msgid
 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 iu_error.
 ENDIF.
 FREE: wa_t_bill_doc.
ENDLOOP.
* for cross reference purpose only
SET EXTENDED CHECK OFF.
IF 1 = 2. CALL FUNCTION 'ISU_SAMPLE_R431'. ENDIF.
SET EXTENDED CHECK ON.
ENDFORM. "EVENT_R431
most of time if I know the event, I just where use list the function module and go into the code and set the break-point a little bit earlier.
Cheers,
Chaiphon

OracleJSP exception in JDeveloper debug mode

Similar Messages

Maybe you are looking for