Order by clause using decode function

Hi everybody,
i need below order in my report.
Connecticut
greenwich
stamford
bridgeport
New York
NYC
wrestcher
byram
Georgia
atlanta
athens
oconny
first i need above order in my view out put.
so in order by clause i used first decode function for State ordering
and in second decode function for city ordering.
i do not need order by ascending or descending.
so pls anybody can help me.
any help is greatly appreciated.
thanks.

add asc after the decode. default is desc

Similar Messages

How can we use DECODE function in where clause.

Hi Guys,
I have to use DECODE function in where clause.
like below
select * from tab1,tab2
where a.tab1 = b.tab2
and decode(code, 'a','approved')
in this manner its not accepting?
Can any one help me on this or any other aproach?
Thanks
-LKR

>
I am looking for to decode the actual db value something in different for my report.
like if A then Accepted
elseif R then Rejected
elseif D then Denied
these conditions I have to check in where clause.
>
what are you trying to do?
may be you are looking for
select * from tab1,tab2
where a.tab1 = b.tab2
and
   (decode(:code, 'A','Accepted') = <table_column>
    or
    decode(:code, 'R','Rejected') = <table_column>
   or
    decode(:code, 'D','Denied') = <table_column>
   )

Using decode function without negative values

Hi friends
I am using oracle 11g
I have at doubt regarding the following.
create table Device(Did char(20),Dname char(20),Datetime char(40),Val char(20));
insert into Device values('1','ABC','06/13/2012 18:00','400');
insert into Device values('1','abc','06/13/2012 18:05','600');
insert into Device values('1','abc','06/13/2012 18:55','600');
insert into Device values('1','abc','06/13/2012 19:00','-32768');
insert into Device values('1','abc','06/13/2012 19:05','800');
insert into Device values('1','abc','06/13/2012 19:10','600');
insert into Device values('1','abc','06/13/2012 19:15','900');
insert into Device values('1','abc','06/13/2012 19:55','1100');
insert into Device values('1','abc','06/13/2012 20:00','-32768');
insert into Device values('1','abc','06/13/2012 20:05','-32768');
Like this I am inserting data into table for every 5 minutes Here i need the result like
output:
Dname 18:00 19:00 20:00
abc 400 -32768 -32768
to retrieve this result i am using decode function
SELECT Dname,
MAX(DECODE ( rn , 1,val )) h1,
MAX(DECODE ( rn , 2, val )) h2,
FROM
(SELECT Dname,Datetime,row_number() OVER
(partition by Dname order by datetime asc) rn FROM Device
where substr(datetime,15,2)='00' group by Dname.
According to above data expected result is
Dname 18:00 19:00 20:00
abc 400 600(or)800 1100
This means I dont want to display negative values instead of that values i want to show previous or next value.
Edited by: 913672 on Jul 2, 2012 3:44 AM

Are you looking for something like this?
select * from
select dname,
       datetime,
       val,
       lag(val) over (partition by upper(dname) order by datetime) prev_val,
       lead(val) over (partition by upper(dname) order by datetime) next_val,
       case when nvl(val,0)<0 and lag(val) over (partition by upper(dname) order by datetime) >0 then
         lag(val) over (partition by upper(dname) order by datetime)
       else
         lead(val) over (partition by upper(dname) order by datetime)
       end gt0_val
from device
order by datetime
where substr(datetime,15,2)='00';Please take a look at the result_column gt0_val.
Edited by: hm on 02.07.2012 04:06

How to use DECODE function in Exspression?

Hi,
Can we use DECODE in Expression?
I'm trying to use DECODE function but there is an error during the validation. But when i validate the mapping, it is successfully compiled but it is failed during deployment.
But if I use CASE instead of DECODE, it works fine.
Can we use DECODE in OWB???
Thanks
Raj

Hi,
In OWB 10gR2, if your are using only one DECODE in an expression, it's working. The package will compile when deploying the mapping. OWB will replace the DECODE by a CASE.
But when you are using nested decode in an expression ( for example : decode(col1, 1, 'M', decode(col2, 'Madame', 'Mme', null)) ) only the first one is replaced by a case at deployment.
In ROW_BASED mode, text of the expression is used outside of an sql statement and deployment will fails with "PLS-00204: function or pseudo-column 'DECODE' may be used inside a SQL statement only."
If operating mode for the mapping is set to SET_BASED, it's working because the expression is used in an sql statement.
I have logged a SR in metalink for this issue and a bug is opened (bug 5414112).
But I agree with you, it's better to use case statement.
Bernard

How to use decode function

Hello Friends,
I have a query that has different columns and I am not sure what the data type of each column is ...
I want to use decode function which displays the following if the value of the column is like this ..
if the value of column is -714E ie -700000000000000 then display as .A
if the value of column is -814E ie -800000000000000 then display as .B
NOTE ; don't know which column is having the value - and i don't know the data type of the column is ..
got to use the decode function for all the columns selected ..
I want to use decode function pls let me know how to write for this kind of requirement.
appreciate your help in this rgds.
thanks/kumar

Dear Sir / Madam,
Thanks for your understanding.
Right now I am facing a unique problem.
I am using decode function in a select statement. The columns are dynamic some columns are of type number and some are varchar datatypes. I want to apply decode function for every column irrespective of datatype.
What i am finding difficult is if the column is a number datatype , the decode funciton is working good but if the column datatype is varchar or char datatype then i am getting ..
here's the decode function..
decode (CHAI.EVNDRIVE,
-800000000000000,'.A',
-700000000000000, '.B',
-600000000000000 ,'.C',
-500000000000000 , '.D',
-400000000000000 , '.E',
-300000000000000 , '.F',
-200000000000000, '.G',
-100000000000000 , '.H',
-1000000000, '.R' ,CHAI.EVNDRIVE ) EVNDRIVE
report error:
ORA-01722: invalid number
pls let me know how to over come this kind of scenario.
is their a way to find whether the column datatype is number or char , so that i can check the column datatype before the decode funciton is applied ..
thanks ..
kumar

Problem using DECODE() function with a Query of Queries

I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:

<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">

So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!

DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil

ViewObjects Order by clause with DECODE

Hello!
I am using Jdeveloper 11g, version 11.1.1.2.0.
The problem I'm having is this.
If I use a DECODE statement in view objects ORDER BY clause, I get an error: "java.util.regex.PatternSyntaxException: Unmatched closing ')' near index 2".
Let me give an example. I'll be using EmployeesView view object, which is using Employees entity from HR schema.
This is a part of view objects XML.
<ViewObject
xmlns="http://xmlns.oracle.com/bc4j"
Name="EmployeesView"
Version="11.1.1.55.36"
SelectList="Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.LAST_NAME,
Employees.EMAIL,
Employees.PHONE_NUMBER,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.SALARY,
Employees.COMMISSION_PCT,
Employees.MANAGER_ID,
Employees.DEPARTMENT_ID"
FromList="EMPLOYEES Employees"
BindingStyle="OracleName"
CustomQuery="false"
PageIterMode="Full"
UseGlueCode="false"
OrderBy="Employees.MANAGER_ID">
As you can see in this case, the Order by clause is very simple. This works like a charm.
But, if put something like this "DECODE(Employees.MANAGER_ID, NULL, 1, 2)" in the Order by, I get an internal parsing error.
I replicated this error on my home machine as well as on my work machine. I'm using the same version of Jdeveloper on both.
Has anyone else stumbled upon this problem and solved it?
Any thoughts would be greatly appreciated :)
Kristjan

The second example works, but the first one doesn't, unfortunately :/
Also, the example I gave is unfortunately just that, a proof-of-concept example that there is a problem with DECODE if it is written inside the Order by clause.
My real DECODE use case is a bit different. Like this: "DECODE(attribute, 'N', 1, 2) ASC".
Since posting my original question, I did some research-by-example work and I discovered that this is not just a problem of DECODE, but more like a problem of brackets and commas.
No database function that uses more than one parameter can be used in Order by clause.
The reason is, if a function with more than one parameter is used, commas inside brackets have to be used. Something along the lines of: "database_function(param1, param2, ...)".
The parser seems to have a problem with this kind of expressions.
Is there a work around?
Kristjan
p.s.: Thank you for your quick response.

Using DECODE Function to change data

I am trying to use the Decode function in a SQL statement to find a field that has a specific type, and when it finds that type, I want to blank out the results in a different field.
For example:
DECODE(ADDR_TYPE,'HOME',PHONE='') HOME_PHONE

something like:
SQL> with t as
2   (select 219 id,
3           'BUS' addr_type,
4           '505-555-5555' phone
5      from dual
6    union
7    select 219 id,
8           'HOME' addr_type,
9           null   phone
10      from dual
11    union
12    select 220 id,
13           'BUS' addr_type,
14           '101-111-1111'   phone
15      from dual
16    union
17    select 220 id,
18           'HOME' addr_type,
19           null   phone
20      from dual
21    union
22    select 223 id,
23           'BUS' addr_type,
24           '202-222-2222'   phone
25      from dual
26    union
27    select 224 id,
28           'HOME' addr_type,
29           '303-333-3333'   phone
30      from dual
31    union
32    select 225 id,
33           'BUS' addr_type,
34           null   phone
35      from dual
36    union
37    select 226 id,
38           'HOME' addr_type,
39           null   phone
40      from dual)
41 select a.id,
42         a.addr_type,
43         decode(a.addr_type,'BUS',phone,null) phone
44    from (select id, addr_type, phone,
45                 row_number() over (partition by id order by id, decode(addr_type,'BUS',1,2)) rn
46            from t) a
47   where a.rn = 1;
        ID ADDR PHONE
       219 BUS 505-555-5555
       220 BUS 101-111-1111
       223 BUS 202-222-2222
       224 HOME
       225 BUS
       226 HOME
6 rows selected.
SQL>

How to use Decode Function in Webi / Designer - BOE XI 3.1

Hi All,
I have a SQL query which needs to include in the webi report.
Below is the query :
SELECT
SECURITY.SEC_CUSIP_NO "CUSIP",
SECURITY.STY_SEC_TY_CD "SECURITY TYPE",
SECURITY.SEC_DERIVED_DESC_TX "SECURITY DESCRIPTION",
SECURITY.sec_dep_teleg_de "FED DESCRIPTION",
SEC_STND_PR "STANDARD/FACTORED PRICE",
SEC_STND_PR_EFF_DT "STANDARD/FACTORED PRICE Date",
SECURITY.SEC_YIELD_PR "YIELD PRICE",
SECURITY.SEC_YIELD_PR_DT "YIELD RICE EFFECTIVE DATE",
STND_PR_VND_VENDOR_CD "PRICE SOURCE",
SEC_MATURITY_DT "MATURITY DATE",
SEC_ISSUE_DT "ISSUE DATE",
             CASE WHEN SECURITY.STY_SEC_TY_CD IN ('BA','CD','CDD','CDE','CDM','CDV','CP','CPD') THEN
                (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * (SECURITY.SEC_STND_PR) / 100
             ELSE
                (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * ( ( SECURITY.SEC_YIELD_PR * DECODE (SECURITY.SEC_PRIN_FT, 0, 1, SECURITY.SEC_PRIN_FT))) / 100
                * DECODE(SECURITY.STY_SEC_TY_CD, 'AMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'MMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'AMPT', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 1 )
             END
        ) "MARKET VALUE"
FROM SECURITY SECURITY
   ,   position position
WHERE STND_PR_VND_VENDOR_CD = 'VT'
AND SEC_MATURITY_DT > SYSDATE-1
and SECURITY.sec_sys_id=position.sec_sys_id
I could create a report which has selected objects and defined where condition from the above query. I have also created a variable for 'when' & 'then' condition but stuck at else part which contains 'DECODE' function.
Please suggestions how to write the same at the report or designer level.
Thanks,
Rameez Shaikh

Hi Rameez,
Looking at the query you can create the object directly in the universe, either create two objects one for inner decode and use it in outer case logic. In report it is nothing but nested if logic. For eg. If(a=b;1;(if(a=c;2;3))
Thanks
Gaurav

Using DECODE Function in SQL

I need to know if there is any way to use a range of values from
database and decode to certain text. I am able to do with one
value.
for example:
DECODE(column_name,'216767111','Unlimited',column_name)
above argument works with one value only. How about a range,
ex: 216767000 to 216767111. I need to use only SQL. No PL/SQL.
Kinldly need some body's help
Thanks
Munis

Which version of the database? If it's 8i+ then you can use
the CASE function
for example:
(CASE WHEN column_name between 216767000 and 216767111
THEN 'Unlimited' ELSE column_name END)
This won't work in PL/SQL because they're introducing a CASE
statement does soemthing different.
rgds, APCHello Andrew
Thank you for response. I am using 8i. 8.1.6. However using
CASE, I get inconsistent data type, ORA-00932: inconsistent
datatypes. I able to work it out with other response using
DECODE(sign(. Do you have any idea why i am getting this error.
If time permits, let me know

How to use decode function in oracle apex 3.2.1

Hello Friends,
how to use decode
var_decode := 'decode'||'('|| var1 ||','|| -800000000000000||','||'.A'||','||
appreciate your help.
regards/kumar
Edited by: kumar73 on Apr 23, 2010 12:25 PM
Edited by: kumar73 on Apr 23, 2010 12:27 PM

Hey just on this particular point, there's a handy PL/SQL method for escaping quotation characters which may reduce the complexity of the string.
For example, if I had a string:
I can't understand why quoting my 'quote' characters never seems to "work"!and I wanted to pass that into a variable, I could do this:
vc_foo:= 'I can''t understand why my ''quote'' characters never seems to "work"!';or I could use the q function, whereby you enclose your string within a quote delimiter of your choice, like so:
vc_foo:= q'^I can't understand why quoting my 'quote' characters never seems to "work"!^';
note: I used the caret (^) character by convention but any valid character will do
...all of which leaves your original string more or less unadulterated.
I find this particularly useful for generating dynamic SQL and dynamic PL/SQL, as it leave the query looking a tad more readable, although if you are chaining together multiple strings with double-pipes, it can make it a little muddier. I find it particularly useful if I'm going to deal with string data from, for example, a field with Irish-derived surnames such as "O'Reilly"...
Give it a go!

Between clause with DECODE function.

Hi All,
I have one table which has object, date and quantity columns, Now based on date range I can find out the objects and quantity but the question is: I want a query which returns all the objects and should show quantity 0(zero or null) for those objects which don't falls under that date range. So I thought to use a decode function but it only uses the relational operation, I thought something like this but it's wrong,
select object,decode(created_date,BETWEEN '01/01/2008' TO '08/01/2008',quantity,0) from table;
Does anyone have any idea how can I make this work in single sql statement?
Thanks for your help.

select object,decode(created_date,BETWEEN '01/01/2008' TO '08/01/2008',quantity,0) from table;
Does anyone have any idea how can I make this work in single sql statement?If you're still interested in using DECODE over Case when, please try this.
Check for employees hired between 6/17/1987 and 9/30/1987
SQL> select first_name||' '||last_name as emp_name, hire_date,
2         decode(sign((to_date('06/17/1987','MM/DD/YYYY')-1)-hire_date)
3           + sign((to_date('09/30/1987','MM/DD/YYYY')+1)-hire_date)
4                   ,0,'Between','Not between') as IsBetween
5    from employees
6   where hire_date <to_date('01/01/1991','MM/DD/YYYY')
7 /
EMP_NAME                                       HIRE_DATE ISBETWEEN
Steven King                                    17-JUN-87 Between
Neena Kochhar                                  21-SEP-89 Not between
Alexander Hunold                               03-JAN-90 Not between
Jennifer Whalen                                17-SEP-87 BetweenMessage was edited by:
Bobbydj

Get purchase order doc date using BAPI function module

Hi,
I have a .net windows application that uses BAPI_PO_GETDETAIL function module to get particular details of a PO in SAP. But i am not able to get the "Doc Date" for a particular PO. I am able to get all the details of items from the table "PO_ITEMS ". I used only 1 input parameter "PURCHASEORDER".
Please help me to get this thing done
.netframework : 4.0
Language: C#
Visual Studio: vs 2010
Regards,
Manosh Jacob

Absolutely hynek petrak..
Manosh Jacob You can go with the above technique.

Order By Using Decode Function

Order by
(DECODE
(length(code),9,
('substr(code,6,1) ,substr(code,1,3)'),
('substr(code,8,1) ,substr(code,1,3) ,substr(code,5,1)'))
) desc
The code length could be 9 chars with the following format :
9 digits as
001-08/09
002-08/09
The code length could be 9 chars with the following format :
or 11 digits as
002/A-07/08
002/B-07/08
The Required Out put is as Follow:
002-08/09
001-08/09
002/B-07/08
002/A-07/08
Any Help pls..?
Regards,
Abdetu..

SQL> r
1 with td as ( select '002-08/09' code from dual union all
2               select '002/A-07/08' from dual union all
3               select '001-08/09' from dual union all
4               select '002/B-07/08' from dual
5             ) -- end testdata
6 select code
7 from   td
8 order by decode(length(code), 9, substr(code,6,1) || substr(code,1,3),
9                                substr(code,8,1) || substr(code,1,3) || substr(code,5,1)
10*                ) desc
CODE
002-08/09
001-08/09
002/B-07/08
002/A-07/08
4 rows selected.
SQL>
[pre]

By using decode function, count mismatch between source and target

Source query:
select distinct
frm_track_id,
--ATTRIBUTE_NAME,
SUBSTR(ATTRIBUTE_NAME,INSTR(ATTRIBUTE_NAME,'_',1,1)+1,INSTR(ATTRIBUTE_NAME,'_',1,2) - (INSTR(ATTRIBUTE_NAME,'_',1,1)+1)) LOCUS,
frm_id,
frm_maj_version,
--'null' as ETL_LOAD_STATUS,
--'null' as ETL_LOAD_DTE,
--'null'as ETL_LOAD_STATUS2,
DECODE(attribute_name,( select attribute_name from dual where attribute_name like '%_allele1'), OUTPUT_ANSWER_VAL, null) ORIGINAL_LOC_ALLELE1
--DECODE(attribute_name, (select attribute_name from dual where attribute_name like '%_allele2'), OUTPUT_ANSWER_VAL, null) ORIGINAL_LOC_ALLELE2,
--DECODE(attribute_name, (select attribute_name from dual where attribute_name like '%_ser1'), OUTPUT_ANSWER_VAL, null) ORIGINAL_LOC_SER1,
--DECODE(attribute_name, (select attribute_name from dual where attribute_name like '%_ser2'), OUTPUT_ANSWER_VAL, null) ORIGINAL_LOC_SER
from iidb_stg.stage_fn_base_translate
where attribute_name in (
'loc_a_allele1','loc_a_allele2','loc_a_ser1','loc_a_ser2',
'loc_b_allele1','loc_b_allele2','loc_b_ser1','loc_b_ser2',
'loc_c_allele1','loc_c_allele2','loc_c_ser1','loc_c_ser2',
'loc_dp_ser1','loc_dp_ser2',
'loc_dpa1_allele1','loc_dpa1_allele2',
'loc_dpb1_allele1','loc_dpb1_allele2',
'loc_dq_ser1','loc_dq_ser2',
'loc_dqa1_allele1','loc_dqa1_allele2',
'loc_dqb1_allele1','loc_dqb1_allele2',
'loc_dr_ser1','loc_dr_ser2',
'loc_drb1_allele1','loc_drb1_allele2',
'loc_drb3_allele1','loc_drb3_allele2',
'loc_drb4_allele1','loc_drb4_allele2',
'loc_drb5_allele1','loc_drb5_allele2'
and frm_track_id=308678
order by 1,2
result set:
frm_track_id
LOCUS
frm_id
frm_maj_version
ORIGINAL_LOC_ALLELE1
308678
a
2005
1
205
308678
b
2005
1
3502
308678
c
2005
1
401
308678
dqb1
2005
1
301
308678
dqb1
2005
1
null
308678
drb1
2005
1
403
308678
drb1
2005
1
null
Target Query:
select distinct
FRM_TRACK_ID,
LOCUS,
FRM_ID,
FRM_MAJ_VERSION,
--ETL_LOAD_STATUS,
--ETL_LOAD_DTE,
--ETL_LOAD_ID,
--ETL_LOAD_STATUS2,
ORIGINAL_LOC_ALLELE1
--ORIGINAL_LOC_ALLELE2,
--ORIGINAL_LOC_SER1,
--ORIGINAL_LOC_SER2
from
IIDB_STG.OPS_FN_SBJCT_TYPING
where FRM_TRACK_ID=308678
order by 1,2
result set:
frm_track_id
LOCUS
frm_id
frm_maj_version
ORIGINAL_LOC_ALLELE1
308678
a
2005
1
205
308678
b
2005
1
3502
308678
c
2005
1
401
308678
dqb1
2005
1
null
308678
drb1
2005
1
403

In Source, you are selecting from iidb_stg.stage_fn_base_translate, however in target query you are selecting from IIDB_STG.OPS_FN_SBJCT_TYPING. the only condition in both where clause is of FRM_TRACK_ID=308678, so i assume that the missing 2 records are not present in
IIDB_STG.OPS_FN_SBJCT_TYPING table. Modifying the target query might not resolve issue but you have to check why these two records are missing from this table in first place.

Order by clause using decode function

Similar Messages

Maybe you are looking for