Order Change Mappping Missing for ECC SRM Integration

Hello XI Experts,
We are using ECC-XI-SRM SUS for PDP scenarion.
We have uploaded the contents and find that no message mapping program exists for Order Change -- that is ORDCHG.ORDERS02 idoc to SRM.
However there is a Interface mapping but it refers to the same mapping program as that for Order Create -- ORDERS.ORDERS02 to SRM.
Can You please let us know , if you faced this as well or not ... and what should be our course of action now.
Thanks,
Mani

Anand ,
can you let us know one more thing..
For ECC-XI-SRM integration all the conents are readymade...
What else do we need to consider... like Alert config etc?
Cheers,
Himadri

Similar Messages

Internal order error: AuC missing for origin assignment

Hi,
We had this requirement of blocking Internal Orders (their use has been discontinued from the past 2 years). I used KOK4. Many of the orders got blocked except for those of Order Type Capex. The following error appears:
AuC missing for origin assignment LHI
Message no. AY089
Diagnosis
Object concerned: Order ####### .
The object has investment profile ABCD and origin structure IM. In investment profile ABCD, the indicator "AuC per origin structure and origin assignment" is set. However, there is no asset under construction for origin assignment LHI of origin structure IM.
System Response
Processing is not carried out.
Procedure
Create the missing asset under construction online (Change object: Extras --> Asset under construction).
When I go the the master data of that particular Order & click on Extras --> Asset under construction, I can see many Source Assignments with assets, but against Source Assignment LHI, the asset is blank & Status shows "Create AuC"
My queries are as follows:
1) Is there any other way I can block internal orders?
2) If not, then can I create Assets under Construction separately, or do I have to go to each of the Internal orders & create them (600+ orders) ?
3) Will the system allow me to create AuC now when the Order status is REL AUC AVAC BUDG GMPS ISBD SET ?
4) Any other suggestions?
Request your expert advice.
Regards,
Sangeeta

Any suggestions?
Regards,
Sangeeta

Change logs missing for OB52

Hi Experts
We have a peculiar problem where change logs are missing for some of the transactions made through OB52 for modifying FI posting periods.
I vefired that change logging has been correctly activated for table T001B. Though change logs are displayed for most of the transactions through SCU3 or in table DBTABLOG, logs will be missing for some records.
Can you please let us know what could be the possible scenarios where change logs are not recorded for OB52 or table T001B even though logging has been activated.
Any inputs on this will be very helpful.
Regards,
Santosh

try log on tcode S_ALR_87003642

Order changes to "Prepared for shipment" then back to "Not yet shipped"

Any idea why? I called Apple Customer Service but they could not give me any reason...one guy I spoke to said he doesnt see ANY activity saying that it ever changed. Am I missing something?

Had the same thing happen. It was because I ordered two phones through Apple.com and somehow they both got processed under the same phone number. I believe it was an issue an their end because it should have been allowed to happen in the first place. The reason it probably changed back is because Apple reconfirms again just prior to shipment that the number is still available for upgrade. If the line has a payment past due, has already been upgraded, etc - it will hold shipment. they will eventually send you an email within the next couple days telling you to call AT&T.
Unfortunately when I tried to get them to change it to another number on the same account (had an AT&T supervisor and Apple supervisor on the phone at the same time to try and do this) Apple would not change it and said all they could do was cancel the order and start a new one with a ship date of 3 weeks out!
I canceled and decided I'll wait till iPhone 4(B).

Changing HTML templates for Standard SRM screens!!!!!

Hello SRM gurus,
I have to modify the standard SRM PO screen. I have modified the screen and added the requirement tracking number field but on activation it gives me message to adapt the HTML template manually.
How to change HTML template assigned to the screen? Also what more needs to be done for the field to appear on the SRM portal?
I am not aware even of the transaction code to be used.
Your help will highly be appreciated and rewarded.
Regards,
Shrikant Gavali.

Hi,
You need not chnage the Standard SRM screen nor the HTML template to add a custom field in the PO sceen.
Please check these notes:
672960 - user-defined fields.pdf
676016 - user-defined fields.pdf
There is an additional note for req tracking no not available in SC but in your case you want the field in PO so wont be relevant.
Note 676016 - SRM: Requirement Tracking Number not available
Also refre this weblog for adding custom fields in the std SRM screens:
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
The tcode for PO is BBP_POC.If you ever need to modify the HTML template for this screen/trascn,goto SE80.select Internet service as BBP_POC.There you can see all the HTNL templates and each of which corresponds to some screen in the trascn BBP_POC(PO trascn).
BR,
Disha.
Do reward points for useful answers.

Usefull Transactioncodes for BI-SRM integration

Hello,
I recently got an assignment to integrate SRM with BI. Can you guys please let me know the usefull trasnaction codes in SRM side to extract the data to BI.
Additionally,
as far as I know we can enhance the datasource as in conventioanl way using RSAP*** user exit and at the Bdoc level. It would be very helpful, if any one can let me know how (or a reference document) to enhance Bdoc to get the additional fields into datasource .
Thanks,

Hi,
SRM BI Content Installation :(SRM(R/3) to BI SRM data target)
1. Down load BI_CONT (Depending on version) from SMP(http://service.sapc.om/downloads) OR You can check with DVDs given by SAP into SRM server.
2. Use Tcode SAINT (Latest SPAM/SAINT version) and Goto Application server-->Down laod BI_CONT in to SRM server
3. Select BI_CONT proceed with NEXT steps as usual(Do not change anything here).
Pls chk this links;
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bb/66073c52619459e10000000a114084/frameset.htm
The connection/create source system(for r/3, srm, scm with BI)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards
CSM Reddy

Sales Order Change BAPI - Reason for Rejection

Hi,
I want to update reason for rejection field for a particular sales order at item level. When I am executing the BAPI "BAPI_SALESORDER_CHANGE", I am getting the error "Field header_inx-updateflag is not an input field". I did not check this field as I'm not making any change in the header part.
Please help me in resolving this issue. Let me know if I have to provide any other information.
regards,
ravikiran.

Found BAPI myself...... BAPI_SALESORDER_CHANGE

Sales Order Change BAPI Extension for Customer Fields

Hello!
I am working on customer field enhancement for BAPI_salesorder_change. The extensionin parameter has more than 1000 characters (fields in the structure BAPE_VBAP) and hence, the two fields that I added to VBAP (using append structure) are not getting the data.
I have followed all the steps that was given in the documentation to fill extensionin like adding the fields to VBAPKOZ and BAPE_VBAP. This is the logic I have used to fill EXTENSIONIN:
BAPE_VBAP-VBELN = P_order.
BAPE_VBAP-POSNR = i_vbap-posnr.
BAPE_VBAP-ZZSTART_DT = sy-datum.
BAPE_VBAP-ZZdnload_DT = sy-datum.
T_EXTEN-STRUCTURE = 'BAPE_VBAP'.
*T_EXTEN+30 = BAPE_VBAP.
T_EXTEN-valuepart1 = bape_vbap.
T_EXTEN-valuepart2 = bape_vbap+240(240).
T_EXTEN-valuepart3 = bape_vbap+480(240).
T_EXTEN-valuepart4 = bape_vbap+720(240).
APPEND T_EXTEN.
Clear t_exten.
BAPE_VBAPX-VBELN = P_order.
BAPE_VBAPX-POSNR = i_vbap-posnr.
BAPE_VBAPX-ZZSTART_DTX = 'X'.
BAPE_VBAPX-ZZdnload_DTX = 'X'.
T_EXTEN-STRUCTURE = 'BAPE_VBAPX'.
T_EXTEN-valuepart1 = bape_vbapx.
APPEND T_EXTEN.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_order
order_header_inx = ORDER_HEADERX
tables
return = T_RETURN
*ORDER_ITEM_IN = T_LINE
*ORDER_ITEM_INX = T_LINEX
EXTENSIONIN = T_EXTEN.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
I guess there is 960 character limitation for BAPIPAREX structure but I would like to know if there is a way to work around it.
Thanks to all for your time.

Found BAPI myself...... BAPI_SALESORDER_CHANGE

Data Type Enhancements: ECC - SRM Scenario

Hello,
Can anyone tell us how to use the Data Type Enhancement. and what all Software component dependencies we need to define for that.
This is with Context for ECC-SRM Integration -- we have installed the add on component LOCINSUS -- this is required for the extra tax information for PO
Can anyone help us on how to use this?
Thanks and Regards,
Himadri

/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
that solves ur anwer,

Production Order Changes...

I need the ability to identify changes made to a production order and the user that made the change. There are instances of incorrect changes being made to production orders with no way to identify the user that made the change. As examples, components are being 'final issued' but no one knows who set the 'final issue' indicator. Labor hours are changed with no traceability to the user who made the change.
SAP contains the capability to track changes to material master data, BOM data, and routing data. Is there the same capability for production order data?

Dear ,
You need to activate Order Change Managment-SPRO-Shop Floor Control -System Modification in case to trak production order change :
A.Enhancements for Order Maintenance
        1.Enhancement for the Display/Change of Order Header Data
        2.Check Changes to the Production Order Header
        3.Checks Changes to Order Operations
B.Enhancements for Order Change Management (OCM)
         1.Check Conflict for Change Step
         2.Definition of Comparison Fields for Order Comparison
C.Enhancements for Order Confirmation
Otherwise , from Basis side you can trak by
1.ST03
2.STAD-Provide SAP T-code , user id , Client .Here you can find out what are the changes user did for any production order based on SAP Trxn .
Regards
JH

Have to provide a popup when there is a Sales order change(VA02)

Hello,
I would like to know how to capture Sales order changes(VA02) through an enhancement. Based upon users changes which can be either a addition or deletion in sales order then I have to provide a popup. I am unable to find out whether Sales order has undergone a change or not. Field r185d-dataloss is alway having 'X' whether data has changed or not. System field SY-DATAR is not capturing any deletion is sales order.
I am using USEREXIT_SAVE_DOCUMENT_PREPARE but unable to check sales order is changed or not.
I need to provide popup after user clicks on Save. Tables CDPOS & CDHDR won't have current sales order change.
Thanks for your replies.
Edited by: harryibm on Dec 11, 2011 8:07 PM

I am using USEREXIT_SAVE_DOCUMENT_PREPARE but unable to check sales order is changed or not.
Donot do any changes and hit save. check if this routine is triggered if you are not changing anything.
In program MV45AF0B_BELEG_SICHERN there is a condition
IF R185D-DATALOSS = SPACE       FORCE_UPDATE   = SPACE     AND
       UPD_VBUK IS INITIAL        AND
       UPD_VBUP IS INITIAL.
The else part will only tirgger if its changed. The routine USEREXIT_SAVE_DOCUMENT_PREPARE is called in the else part.

How to read service order change document data

Hi Experts,plz help me,my requirement is to read the service order change document data,for that one i need to read from cdhdr and cdpos tables,so what i need to do.in input parameters for cdhdr table in place of ibjectclass and objectid what i need to pass.plz help me.

Same for CDHDR and CDPOS.
OBJECTCLAS = 'ORDER'
OBJECTID = combination of client(AUFK-MANDT) + Order category(AUFK-AUTYP) + Order number (AUFK-AUFNR)
for example
OBJECTCLAS = 'ORDER'
OBJECTID = '10030004001108788'
Chaiphon

User Exit for third party order processes.Missing in ECC 6.

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameesha

changed our requirement

Searching for Workflow for Purchase Order Change

Hi experts!
We are using SRM5.0 / extended classic scenario and backend R/3 4.7 Enterprise.
We should implement an approver process for the purchase order changes. Does any one of you know whether there exists a standard SAP workflow?
Many thanks for your help.
Regards,
Corinne

Hi
Please refer to the following links for detailed step-by-step details.
Workflows for Purchase Orders - n-step approval workflow ( WS14000145 )... Start WS14000075, WS14000089 or WS14000145...-step approval workflow ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/5a/c5173f5ff48443e10000000a114084/frameset.htm
Authorization - Purchase orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
Setting Up SAP Business Workflow - WS14000145 ( n-step approval )... WS14000145... WS14000145 N-step approval PO WS14000145 N-step approval of contract
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
Dynamic Modification - Purchase orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/84/dda441e79ead5fe10000000a1550b0/frameset.htm
Back & Forth Processing and the Retain Function - Purchase orders ( WS14000145 ) 
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
Approval Workflows for Purchase Orders and Change Versions
http://help.sap.com/saphelp_srm50/helpdata/en/ec/fe163ff8519a06e10000000a114084/frameset.htm
Workflow for Contracts - Workflow for Purchase Orders ( WS14000145 )
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
SRM Business Workflow - One-step Approval
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
WS14000089
http://help.sap.com/saphelp_srm50/helpdata/en/5a/c5173f5ff48443e10000000a114084/frameset.htm
WS14000075
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5efc85d011d2b42d006094b92d37/frameset.htm
Regards
- Atul

CRM Service - ECC Logisitcs Integration (Spare Parts in a Service Order)

Hi Experts,
We have been trying to configure a scenario for CRM Service Orders with SAP ECC logistics integration in CRM 7.0 EHP1.
We are aware of the standard configuration wherein we assign one logistics scenario ( Purchase Requisition or Purchase Order or Reservation) for a specific service organization & Item Category for spare parts in service order.
Our first query : Is it standard that the spare part will be automatically reserved if it is in stock (after ECC availability check from service order) and purchase requisition or purchase order is created only if it is not in stock?
We also understand that while a reservation happens during Service order creation, the goods issue or material withdrawal happens only on service confirmation. If this the case, how will the physical delivery happen to customer? This is our second query.
Please note that we are raising this query only for spare part items in service order and not for sales item in service order.
It would be great if you could help us with this issue.
Responses will be suitably rewarded.
Thanks,
Prish

Hi Pritesh,
Thank you for your prompt reply and help, appreciate the same, we would be going for the scenario where the service order in sap crm has saleable parts, the service order would get replicated to ecc as a sales order and the costs would get booked when the post goods issue is performed after creating the delivery in SAP ECC.
Following are the configurations done
1) Service Order type ZRVW is created in SAP CRM
2) The same service order ZRVW is mapped in SAP ECC
3) The service order in SAP CRM has the following number range and the same is kept internal
4) The same number range is marked as external in SAP ECC in vn01 tcode
5) The number range is assigned to the document type ZRVW in SAP ECC
6) Item category determinations are done in SAP CRM, standard SRVS(Sales items are copied to YRVS)
7) The same item category determination is also set in SAP ECC for Item category group NORM
8) Item category determination is also set for ERLA as item category group in ECC
9) The item category YRVS is set to delivery relevant in SAP ECC
10) The standard schedule line is determined which is CP is relevant for delivery
11) The sales area is also assigned to the document type ZRVW.
12) In SAP CRM, the status profile YCONT is assigned, having the business transaction to be distributed, the status of the same is set to allowed for completed status
13) The status profile has been assigned to the transaction type ZRVW
14) Pricing configurations are also done in sap crm and sap ecc
15) Now I am creating the service order ZRVW in SAP CRM, having saleable parts, customer's and material's exist in both systems having the same sales area, the status is set to completed at item and header level
16) The system is throwing an error when I click on edit
17) When checked In sap ecc the system says that the document does not exist
18 I did open the error in SAP CRM and it says that there are some settings required for billing
Since there is no billing relevance to this scenario in the item category the billing relevance is set to no billing
Please advice further
Kind Regards
Atul

Order Change Mappping Missing for ECC SRM Integration

Similar Messages

Maybe you are looking for