Order clips by recording date

I have a big problem.
Usually register the video with 2 Canon 5DMKII, during editing I import the clips in a bin and I select the column of the date and time of recording information so as to synchronize clips with time. Now I upgraded to PR CC and I noticed that the order date is not there. How can I solve this problem and to synchronize the two rooms per hour of recording?

Menu item:
View->Sort->next step left to the user as a homework assignment

Similar Messages

  • How can I save captured clips to hard disk using the actual video recorded date, not the date I transferred it?

    When using Batch capture in AP5.5, the clips are saved to hard disk using the capture date as the Created Date and Modified Date.  How do I configure Premier to use the actual clips recorded date (Meta Data Basic/Date Created) so that I can view them in Windows folders and other applications based on the date the video was recorded, not when I imported it.

    AFAIK, there's no way to do that with Premiere Pro.  You can probably find a utility on the Internet that will change the dates for you after the fact. 
    Cheers,
    Jeff

  • View video clip recording date in PRE7?

    Hello,
    The recording date information of video clips is embedded in my AVI-file but how can I view it in PRE7?
    There must be a better solution than to open the file in my old software (Pinnacle) where this information can be found easily.
    The video was captured through firewire from a digital camcorder (DV).
    Cheers

    Hans,
    I do not use the Organizer, so do not know all of its power and limitations, but think that you should have the Metadata available there. Depending on the camera used, that should contain the shooting date, provided that the calender and clock were set on it. Does that not work with this footage?
    I feel your pain, as I had to transfer 34 VHS tapes for editing a series of DVD's for the client. Luckily, his VHS camcorder started each scene with a Date/Time imprint. Now, this was often edited out, when I did the post-production work, but I would just look at the 'master" Clip, jot down that info, and then Title with it, say "Liz & Page Christmas 1985." As I transferred, I also made a shot log with all dates, plus notes on each scene, so I had much of that stuff already. Obviously, there was no Metadata in these to use, but many cameras do have that info now. Do not know all of the situations where it might not be accessible, or by which programs.
    Good luck, and maybe some Organizer "power-user" can fill in the blanks for us both.
    Hunt
    PS - Adobe is very lenient with mention of other programs, even direct competitors' apps. They seem fully committed to allowing the user the best possible experience, even if it means picking up a copy of ______. Most of us have all sorts of NLE's, and utilities in those "toolboxes." While I do use mostly Adobe programs, I have many others too. Some are highly specialized, and only get trotted out once per year. A few others see much more use, but even then, that usage pales to my use of Adobe products.

  • How can I record data from 2 devices synchronously

    Hi,
    I've been working on this VI for some time now and I've already recieved some prior help from these forums, so I hope I can get this problem solved.
    I have a DAQpad 6020e, a hot wire thermo anemometer, and Labview 7.1.  I need to take voltage measurements from the DAQpad at a scan rate I specify (I have it set to 1000 in the screenshot), while simultaneously taking readings from the anemometer.  However, the anemometer only takes readings every 1.6 seconds, which it sends to the serial port in ASCII.
    I have tried many iterations of this vi to try to get the data to come out synchronously.  By synchronously, I just mean I want both measurements to START at the EXACT same time.  Obvisously the scan rates are drastically different so I will have far more measurements from the DAQpad, but that is ok so long as both measurements start at the same time.  I cannot control when the anemometer makes its reading, so what I have attempted to do is as follows:
    1.  VI starts, both reads initialize, then DAQpad scan begins.
    2.  If Scan Rate and "Scans to read" are equal, it takes one second for measurements to start being recorded from the DAQpad.
    3.  In an attempt to synchronize the measurements, I attempted to tell the anemometer WHILE loop (serial) to wait until the first measurement has been recorded from the DAQpad.  (**Note, I have also tried using the "number read" lead off of the AI read command).
    4.  Because I only get 1 reading from my anemometer per 1.6 seconds, I can't predict when the next reading will be.  But I want my measurements to be corrolated in time, so I have attempted to start the measurement file as soon as the case structure starts.  This way, even if the very first reading is invalid, the rest of the readings will be valid and will be taken at times that directly correlate with the DAQpad measurements.
    I have run this vi many times, with different results.  I have gotten it to run sucessfully many times, meaning that both measurement files started recording data at the exact same instant, even if the anemometer reading wasn't available yet (I know this because the second measurement was taken at a time earlier than 1.6 seconds, meaning that the file did not wait for a measurement to be obtained in order to assign a value at 0 time).  HOWEVER, other times, this vi does not run correctly.  Sometimes the anemometer readings begin before the DAQpad readings, sometimes after.  In every case where the vi does not work, it appears that the anemometer measurement has waited for its first measurement to be recorded at time 0 instead of starting the measurement file when the DAQpad starts.
    I need to know why this vi doesn't run consistently.  I can see it do what I want it to do over and over again, but I can't use this vi if it is not 100% consistent.
    Thank you,
    Jake
    Attachments:
    LabVIEW Synchronization Attempt.pdf ‏78 KB

    For future reference, just post the actual VI.  It is easier to troubleshoot than a print as a PDF.
    Given the software complexities of separate threads and serial bus versus PCI bus, I don't see how you can say that the measurements actually start at the same time.  The only way you can say that the measurements started together was if you were using a hardware trigger.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Stock confiramtion at sales order level for future date- Availability Check

    Hi all
    Here is the scenario
    This setting is available in the system:
    Stock is available
    Sales order created with Requested delivery date in future-> not confirmed
    Sales order created with Requested del date today -> confirmed
    The requirement :
    how and where to change this setting in IMG so that also orders with Requested Delivery Date in future are confirmed if stock is available.
    As this is urgent request to respond quickly.
    Regards
    Devender

    Hello Devender,
    You can achieve the mentioned scenario by configuring ATP. You can do ATP with RLT or ATP without RLT.
    In ATP with RLT, system will check and confirm the quantities from existing stock only and if quantities are insufficient then the system will consider inline POs or manufacturing time to confirm remaining quantitites.
    Else you will be getting schedule lines for only items in stock and remaining will be unconfirmed as ATP without RLT will be activated i.e., system will check and confirm the quantities from existing stock only.
    Types of Availability Check in Sales and Distribution
    Processing
    There are three types of availability check:
    _ Check on the basis of the ATP quantities
    _ Check against product allocation
    _ Check against planning
    The following SD-specific control features need to be maintained in Customizing:
    _ Checking group
    The checking group controls whether the system is to create individual or collective
    requirements in sales and shipping processing. In addition, a material block for the
    availability check with transfer of requirements can be set here. The checking group can
    also be used to deactivate the availability check. This option was created especially for
    the assembly order so that when the bill of material is exploded in the assembly order,
    the individual components, if necessary, can be classified as non-critical parts as far as
    procurement is concerned.
    The checking group specifies in combination with the checking rule the scope of the
    availability check. It is proposed in the material master record on the basis of the material
    type and the plant, and copied into the sales and distribution documents.
    _ Checking Rule
    You use the checking rule to control the scope of the availability check for each
    transaction in sales and distribution. You also specify whether the check should be
    carried out including or excluding replenishment lead time. The individual checking rules
    define by transaction, which stock and inward and outward movement of goods should
    be taken into account for the availability check.
    _ Schedule line category
    You can control with the schedule line category whether an availability check and
    transfer of requirements should be carried out in the sales documents. The possible
    settings for this at schedule line level are dependent on the settings in the requirements
    class which is determined from the requirements type of the material.
    _ Delivery item category
    The delivery item category can be used to control whether an availability check takes
    place in deliveries.
    Requirements type
    The various requirements are identified by their requirements type. The requirements
    type refers to the requirements class and its control features.
    _ Requirements Class
    The requirements class contains all control features for planning such as relevance for
    planning, requirements planning strategy and requirements consumption strategy. In
    addition, it is specified at a global level whether an availability check is to take place for
    the material in the sales and distribution documents on the basis of the ATP quantity
    (ATP = available to promise) and whether requirements are to be passed on. A finer
    degree of control can be obtained for sales documents using the schedule line category.
    Replenishment lead time is only included in the check performed on the basis of the
    ATP quantity.
    Prerequisites
    An availability check can only be carried out if the following prerequisites have been fulfilled:
    _ The control elements described above for the availability check must be maintained in
    Customizing for Sales and the relevant assignments made to the sales transactions
    _ The availability check must be switched on at requirements class level and - for the
    availability check in the sales documents - at schedule line category level
    A requirements type must exist by which the requirements class can be found
    _ A plant must be defined. It can either be proposed from the customer or material master
    record or can be entered manually in the document.
    _ A checking group must be defined in the material master record on the Sales/plant data
    screen in the Availability check field
    Configuring entries of the Availability Check
    IMGSDBasic fncsAvailability check and TORAvailability checkAvailability check with ATP logic or against planningDefine checking groups
    You can use SAP std checking groups of 01 for summarized reqts or 02 for daily reqts or u can create ur own.
    The columns total sales and total deliveries are selection options whereby u can configure a checking rule to sum up reqts to post to MRP either individually or by day or week.
    Column 5, Block qty; set this block if u want several users to be able to process the material simultaneously in different transactions without blocking each other. The No Check indicator is used when u want a material to not be relevant for an ATP check.
    Defining a material block for other users. The Block checkbox is an indicator that enables u to block the particular material from being checked for availability if it is already being checked at the same time by another user.
    Defining the default value for checking groups. However should no entry exist for the checking group in the material master record, one can set a default value per material type and plant.
    Controlling the availability check. In this section, u tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sd transaction. The carry out control for the availability check must be maintained for both the sales order and delivery.
    Reward points if helpful.
    Regards,
    Priyanka

  • Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive but many are not showing up in Aperture.

    Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Authorization No view of prizes in orders and information record

    Hello,
    I have got another problem in an ECC 6.0 system.
    The users should not be able to see the prices in orders and information records for certain suppliers.
    For me that sounds strange because a person who orders material should be able to see the prices.
    But anyway this is the request. The user should be able to create an order for the supplier, but prices should not be shown.
    Authorization object F_LFA1_GRP contains authorization for suppliers data, but this object is not be checked in transaction ME21N.
    For transaction MK03 there are authorization objects F_LFA1_BEK,  F_KNA1_BED and F_LFA1_GRP which manage access to master data.
    For conditions in module SD there is a note 105621, which contains modification for a authorization check for the condition screen in VAxx, so that users are not allowed to see prizes.
    Is there a similar solution for module MM too?
    Or is there another user exit oder modification possible?
    Thanks in advance,
    Julia

    Hi,
    This is more common than you would think.  With a few EU companies changing their company structure to minimise tax maximise operational efficiency, visibility of sensitive data takes a new dimension over and above personal information.
    I've done this with ME21/22/23N.  We used enhancement points to add code which suppressed the pricing relevant fields.  In this case it was a simple toggle - View all or View none -  I don't see why you can't get a bit more adventurous based on a data attribute within the vendor

  • Control Record - Data fetch in IDOC

    Hi Folks,
    Can you please tell me from where the Control Record data for ORDERS and ORDCHG gets populated. ? I have checked the FM - IDOC_OUTPUT_ORDERS which has one of the import parameters as control_record_in which is already populated when it reaches this FM. I am triggering the IDOC using - NACE settings.
    Since there are many output types and message variants involved in my system i will have to find out from where the Partner profile are loaded. ?
    Thanks
    Balakumar

    Hi Balakumar
    Have you checked in NACE->Output Types->Processing routines, if the output type you are using is indeed configured to use RSNASTED?
    If it is using RSNASTED, then in that program it will call a function to read the partner.
    It basically checks table EDP12 based on your output type, partner number, etc, and then retrieves the IDoc Message Variant, Function, Process Code. This then gets populated into the IDoc Control Record.
    Table EDP12 basically is populated when you configure partner profile in WE20 -> Outbound Parameters -> Message Control.
    Rgds
    Eng Swee

  • Some question on IDOC (Control Record/Data Record/Status Record)

    Dear all,
    I am new in this area, and would like to enquire some question on this topic.
    When I view a IDOC via WE02, each of the IDOC record will consist of Control Record/Data Record/Status Record).
    Questions:
    I notice that the data records consists of many segment (i.e. E1EDK01, etc) which are use to store application data.
    1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
    2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
    3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
    Thanks.
    Tuff

    Hi Tuff,
    As everything in SAP, with IDOCs too there are
    1) Standard IDOCs
    2) Standard IDOCs(Extending - Enhancement to an IDOC, to accomodate for custom values)
    3) Custom IDOCs
    And every IDOC has,
    Control record - EDIDC Structure - This mostly reflects the partner profile information, along with few more details which are used for IDOC extension, Sequencing etc
    Data Records - EDID4 Structure - These records contain the actual business data of the document in concern. So for ORDERS05 it would contain order details, INVOIC02 - Invoice details so on...
    Status Records - These records capture the status of an IDOC from the time it is received/sent from your system and a corresponding business document is created/changed. So this will have messages like "IDOC sent to the port OK" etc which are status from the communication layer(ALE) to application specific messages like "Sales Order XXX created" or "Invalid Material" etc.
    You would have noticed something called as Process code in the partner profile, this is associated with a FM(or work flow task etc) which has the business logic coded in.
    So in case of an Inbound IDOC, the sending system updates the IDOC - Control and Data records, and sends it to the receiving system. On the receiving system the IDOC's control record is validated against the partner profiles set, if an entry is found then using the process code it finds the associated FM which will decode the data from the IDOC data records as per the IDOC type and then use it to post data into SAP (VIA BDC, Batch Input, BAPI etc).
    And all this while the Status records are being updated accordingly.
    So with the above context will try to answer your questions,
    1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
    In case of a custom IDOC, yes you will have  to.
    In case of a standard IDOC, you wouldn't have you just have set up the necessary configuration (Partner Profile, Process code etc)
    In case of a standard IDOC extended to accommodate for some custom values(for which there are no fields in standard IDOC - Let us say you have added some new fields on VA01) - In this case you can still use the standard Process code and Standard FM associated with it, SAP provides several Function exits in these FM's which you can leverage to add your custom logic.
    2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
    There are several documents available on the net and on SDN detailing step by step approach for all the above three cases,
    just search for step by step guide for IDOCS - sap.
    3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
    Again it depends, in case of using a standard IDOC you wouldn't have to. But in case you have some customizations/enhancements then you might have to.
    For Ex: updating the control record accordingly for indicating that you have extended the standard IDOC. Or append custom messages to the status record as per the business logic.
    Try out the examples you find on the net and post any specific questions you might have.
    Regards,
    Chen

  • How can I sort clips by creation date in the project window?

    Trying to find a way to sort clips by creation date in project window, but can't seem to find an option for it. Is it possible?

    im using windows pc.. and a program called 'renamer' which is kinda tricky but free and easy once you figure out how to use it... if you know dos filename conventions and wildcards its easier to figure out.. add rules etc... no clue if this program is avail if you have mac...
    but put all files into a temp folder... use the renamer program.. it will write new names to the same folder.. then move all your files where you want to keep them and delete the temp one...
    if you want more info I'll chk back here..
    the main thing is that you can add prefix to filenames to keep track of what you shot when and ingested ... scenes etc .. or you can replace the sort order by just putting in a number or letter in filename that makes it sort the way you want...
    good luck

  • Advanced table to create a multi-record data entry page

    how to use advanced table or table OAF features to create a multi record data entry page ?
    there will not be any master or header region. Only a multi-record detail region for creating records.

    Hi ,
    There is no such "multi-record detail region" , you can illustrate Master detail in OAF by creating the region in following order .
    1 ) Page Layout region
    2 ) Any header region(eg - message component layout etc ) - for entering and saving header level records .
    3 ) Advance table - for entering and saving the line level records ( with add another row feature ) .
    Thanks ,
    Keerthi

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • Purchase order error with future date

    Hi,
    Here one scenario like
    We have created a sales order VA01-->Pur. Order ME21N with current date i.e., 05.09.2008. System able to post perfectly and post MIRO, cutomer invoice and finally released to accounting.
    Now, same sales order VA01-->Pur. Order ME21N with future date i.e., 05.09.2009. System threws error message "Account requires an assignment to a cost object".
    Here my question is, why system is asking this assignment if i gave future date(05.09.2009) and why system is not asking if i gave current date(05.09.2008) ? remaining all are same except date
    Looking forward your comments/thoughts
    thansk
    anifi

    Hi,
    Thanks for your reply
    regards
    Edited by: Anifi on Sep 22, 2008 6:18 AM
    Edited by: Anifi on Sep 29, 2008 2:05 PM

  • Using a waveform graph, how to get all recorded data graphed?

    I record data from 6 channels using DAQmx with simulated channels and write to measurement file.  Then using read from measurement file, and waveform graph, I am trying to graph the data that has been recorded.  I am only getting a small amount graphed.  The same graph appears whether I have let the measure and record program run for 1 minute or for ten minutes.  It also displays a time at the end of the graph that is in the future.  What am I doing wrong?  Please help.
    Hillis Pratt, Jr.

    I am attaching the two VIs I have been trying to use.  I started with examples from NI and didn't go far from that.  Any assistance would be appreciated. 
    Attachments:
    Measure and Record Six Voltages with Express1.vi ‏119 KB
    Graph Measurement Files1.vi ‏89 KB

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

Maybe you are looking for