Order Confirmation Print Program
Hi,
Can any body tell me the standard print program for order Confirmation?
Thanks and Regards,
Alok
Can you tell me which one are you using ( SMART form or SAP Script).
If it is Sap Script just copy the Layout Set and Program to Custom then do the modifications.
If you want to do it in smartform,
I don't think there is a standard smartform exists for this.
In this case you can migrate the SAP Script to Smartform . and then you can do the changes.
Thanks
Sekhar.
Similar Messages
-
Order confirmation Print Program and Smartform
Hi,
I found a smartform for the order confirmation.'/SMB40/SDORC_A'.I have searched the forums and found the print program to be the same.But we don't have it.We're on ECC 6.0Where can we download the program from?
Thanks..
Edited by: John G on Feb 4, 2008 5:19 PMHi John,
He has given some FM that is generated by that form. But that FM will vary from system to system . So thats very very wrong.
Some times smartforms will not be there in our system . You have to request your superiors to place the forms in place.
Reward points if useful
Regards,
Nageswar. -
Purchase order SAPFM06P print program
Dear all,
Does anyone know how this print program works? In standard I seems that there are only two includes and when I look inside it the ME_READ_PO_FOR_PRINTING function module is repeated several times. My goal is to add field at the item level but I did even not identified where the open_form FM is declared...
Best regards.
NC.Hi Milind,
Hereafter is the code I find within FM06PF02 include.
INCLUDE FM06PE02 *
form entry_neu using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
l_druvo = '1'.
else.
l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Umlagerungsbestellung, Hinweis 670912 *
form entry_neu_sto using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print,
F_STO. "670912
clear ent_retco.
if nast-aende eq space.
l_druvo = '1'.
else.
l_druvo = '2'.
endif.
F_STO = 'X'. "670912
call function 'ME_READ_PO_FOR_PRINTING'
EXPORTING
ix_nast = nast
ix_screen = ent_screen
IMPORTING
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
CHANGING
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
EXPORTING
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
ix_sto = F_STO "670912
IMPORTING
ex_retco = ent_retco.
endform.
*eject
Mahnung
form entry_mahn using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = '3'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Auftragsbestätigungsmahnung
form entry_aufb using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = '7'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Lieferabrufdruck für Formular MEDRUCK mit Fortschrittszahlen
form entry_lphe using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_xfz,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = '9'.
l_xfz = 'X'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_xfz = l_xfz
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Lieferabrufdruck für Formular MEDRUCK ohne Fortschrittszahlen
form entry_lphe_cd using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = '9'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Feinabrufdruck für Formular MEDRUCK mit Fortschrittszahlen
form entry_lpje using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_xfz,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = 'A'.
l_xfz = 'X'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_xfz = l_xfz
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Feinabrufdruck für Formular MEDRUCK ohne Fortschrittszahlen
form entry_lpje_cd using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = 'A'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
INCLUDE FM06PE02 *
form entry_neu_matrix using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
l_druvo = '1'.
else.
l_druvo = '2'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_mflag = 'X'
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Angebotsabsage
form entry_absa using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
l_druvo = '4'.
clear ent_retco.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Lieferplaneinteilung
form entry_lpet using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
l_druvo = '5'.
else.
l_druvo = '8'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Lieferplaneinteilung
form entry_lpfz using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
if nast-aende eq space.
l_druvo = '5'.
else.
l_druvo = '8'.
endif.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_xfz = 'X'
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
*eject
Mahnung
form entry_lpma using ent_retco ent_screen.
data: l_druvo like t166k-druvo,
l_nast like nast,
l_from_memory,
l_doc type meein_purchase_doc_print.
clear ent_retco.
l_druvo = '6'.
call function 'ME_READ_PO_FOR_PRINTING'
exporting
ix_nast = nast
ix_screen = ent_screen
importing
ex_retco = ent_retco
ex_nast = l_nast
doc = l_doc
changing
cx_druvo = l_druvo
cx_from_memory = l_from_memory.
check ent_retco eq 0.
call function 'ME_PRINT_PO'
exporting
ix_nast = l_nast
ix_druvo = l_druvo
doc = l_doc
ix_screen = ent_screen
ix_from_memory = l_from_memory
ix_toa_dara = toa_dara
ix_arc_params = arc_params
ix_fonam = tnapr-fonam "HW 214570
importing
ex_retco = ent_retco.
endform.
Now I would like to know how does this get the purchase order title from transparent table t166u in order to copy the procedure within my client customized program.
Does this include refers to the MEDRUCK function module?
Regards.
NC. -
Urgent,About Purchase order SAPFM06P print program
Hi ,
We define a form("ZFORM") for contract printing in language EN,and we want to use it no matter what language the vendor master data is.But now we have a problem that
when the vendor master data is maintained in ZF language,the print program can not call the form in EN , Do we have to delete other language define of "ZFORM"?
Does anyone can help? thanks a lot.
PoleSolved by ourself. In fact,we have EN version only, and when we transported the form from DEV to PRD,an unfinished version of ZH form was transported, so it showed the wrong result.
-
Purchase order SAPFM06P print program to smartform
Purchase order SAPFM06P,
The above programs referes to PO script form. Now i have created PO smartform. I am looking for program to call smartform. But this program refers to script. So how can i find the smartform calling program.
Regards,
VasudevaYou have to create a new program. You can copy SAPFM06P into Z program and should make some changes in new program.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = "write the formname you created
IMPORTING
fm_name = function_module_name.
CALL FUNCTION function_module_name
After writing this program, go to NACT transaction and set your Z program. -
What is the standard Print Program for standard Purchase order ( MEDRUCK ).
-NeoHi,
For purchase order, standard print program is : SAPFM06P.. and it is also
configured in NACE with corresponding form
You can get print programs by checking with table TNAPR.
Regards,
Ramesh. -
Standard print program for order confirmation
Hi All,
I have created smartform for sales order confirmation,now i want to attach it to output type i need standard print program for order confirmation.Do we have any standard program for the same ?
Thanks in advance
ShrilaHi Shrila,
refer to the thread below:
Order confirmation smartform
With luck,
Pritam. -
Smartform print program for order confirmation
Hi experts.
I am looking for a smartform print program for order confirmation.
The order confirmation in standard is a script with the name RVADOR01 and I tried to copy and change but I don't know which to eliminate and whcih to keep it.
If any body written the program already please provide me or provide the link to check.
Thanks in advance
Saithis is the processing form.
form processing.
data: lf_fm_name type rs38l_fnam.
data: ls_control_param type ssfctrlop.
data: ls_composer_param type ssfcompop.
data: ls_recipient type swotobjid.
data: ls_sender type swotobjid.
data: lf_formname type tdsfname.
data: ls_addr_key like addr_key.
data: document_output_info type ssfcrespd,
job_output_info type ssfcrescl,
job_output_options type ssfcresop.
perform get_data.
check retcode = 0.
perform set_print_param using addr_key
changing ls_control_param
ls_composer_param
ls_recipient
ls_sender
retcode.
*Get the Smart Form name.
if not tnapr-sform is initial.
lf_formname = tnapr-sform.
else.
message e001(/smb40/ssfcomposer).
endif.
determine smartform function module for invoice
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = lf_formname
importing
fm_name = lf_fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
error handling
retcode = sy-subrc.
if sy-subrc = 1.
message e001(/smb40/ssfcomposer).
endif.
if sy-subrc = 2.
message e002(/smb40/ssfcomposer) with lf_formname.
endif.
perform protocol_update.
endif.
call function lf_fm_name
exporting
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
is_nast = nast
is_vbdka = vbdka
is_addres = addr_key
importing
document_output_info = document_output_info
job_output_info = job_output_info
job_output_options = job_output_options
tables
it_vbdpa = tvbdpa "Item information
it_vbdpau = tvbdpau "Subitem numbers
it_vedpa = tkomservp "Contract Item Validity
it_vedka = tkomservh "Contract Header Validity
it_vedpn = tkomservpn "Contract Item Cancellation Data
it_vedkn = tkomservhn "Contract Header Cancellation DA
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
retcode = sy-subrc.
perform protocol_update.
get SmartForm protocoll and store it in the NAST protocoll
perform add_smfrm_prot.
endif.
endform. "processing -
Need adobe print program for sales order confirmation
Hello folks, anybody an idea about a sap standard print program and form for adobe forms concerning the sales order confirmation. can't believe that the old sap script RVADOR01 or ...01 ist still the standard. thanx for help
YES i searched the forums before posting a thread, and i didn't find relevant articlesThe Adobe PDF-based forms for sales are available since Enhancement Package 2 for release ECC 6.0.
Order confirmation (SD_SDOC_FORM01)
Print programs - check package VD_PDF or package interface VDPDF_REL. -
Print order confirmation at multiple branches
I need to be able to print an order confirmation ( sapscript ) to all of the sourcing plant specified in the items. We are using the standard print program, RVADOR01. The copies need to print to the default BA00 printers set for the branches.
How can I do this?
Thanks,
Andrew DavidsonHI,
In Txn. NACE... Select your "Application V1".. then choose the button "condition Record" then choose your output type then maintain the condtion..
Doc Type: <Value>
Function: SP
Medium 1
Date/Time: 4
Language:EN...
then choose the line and click on "Communication" button here maintain the "output Device, flag print immedieately/release After output.
and then try again.
If your using Smartform/Scriptform then you need to define like this:
Medium: 1 Print output
Program: R2RRVADOR01
Form routine: ENTRY
Form: R2RBL_SDORC_L
*PDF/SmartForm Form: *******Blank
*Type: ******Blank
Regards
GK.
Edited by: Gnana Kumar on Nov 17, 2010 5:24 AM -
Production Order Confirm/Label Printing problems
I am currently having issues printing out labels for production orders. Whenever I confirm an order, our printer will print out a different quantity or no label at all.
Here is a brief history of production order confirmations today....
Entered Printed
80 40 (2 labels of 20)
20 No Print
20 No Print
40 No Print
ALL confirmations were accepted by SAP
SAP WILL often drag during a normal confirmation when correct labels are printed
SAP will NOT drag when a confirmation is entered and no labels are printed
Yesterday I had a confirmation for 10 print out a label for 19. All of the quantities in SAP are correct, it's only the printer that is creating labels for different quantities. If all the lot sizes in SAP are correct, what do you think the issue might be?Hi,
Based on what i understand of your query, would suggest to work with your technical person to have a look at the print program. The delay you notice or the incorrect data being printed might have to do with the program.
Regards,
Vivek -
Hello,
I need to do some print testing on our production order confirmation form (LV02).
I know about the program RSNAST0D where an application and an output type can be selected and it shows all documents available for printout. But I cannot find an application and/or output type here that would print the confirmation out.
I was wondering if something similar is existing in order to print out production order confirmations?
Thanks
AnneAs part of a quick solution, I would look at a custom table that would store the relations between user and Order Number, along with all necessary info and then base ur report on this table.
Ravi -
SD Order confirmation. PRinting sales order texts.
Hi,
I am Developing a smartform for sd order confirmation.
I have a requirement to print the sales order header texts(header text and ship/fwd inst).I have included them as an include text but i also need to print the phrase 'header info' before header text like,
header text:
xxxxxx
xxxxxx
is there any way i could do it, if anyone knows please help me....
Thanks,
xavier.one way is:
Create a global v_flg variable of character with length 1.
Create a program node, and call <b>READ_TEXT</b> function module by passing the text name, text id etc. This will return the text in the table it_lines.
check for entries in it_lines.
if it_lines[] is initial.
v_flag = 'X'.
endif.
For the text node printing the label, on the condition tab check for v_flag <> 'X'.
The label will print only if there is any text. -
Cannot Print Order Confirmation with Smartforms
Dear Sir/ Madam,
I tried to print Order confirmation with Smartform but failed with the return message as "Output could not be issued".
The followings were my settings:.
At NACE, the Processing rouines confiugration for Application: V1, Output Type:BA00 was
Medium: 1 Print output
Program: R2RRVADOR01
Form routine: ENTRY
PDF/SmartForm Form: R2RBL_SDORC_L
Type: Smartform
At VA02, the output was added as:
Output: BA00
Description: Order Confirmation
Medium: 1 Printout
Func: SP
Lng: EN
Could anyone consult out?
Cheers,
Simon
Cheers,
SimonHI,
In Txn. NACE... Select your "Application V1".. then choose the button "condition Record" then choose your output type then maintain the condtion..
Doc Type: <Value>
Function: SP
Medium 1
Date/Time: 4
Language:EN...
then choose the line and click on "Communication" button here maintain the "output Device, flag print immedieately/release After output.
and then try again.
If your using Smartform/Scriptform then you need to define like this:
Medium: 1 Print output
Program: R2RRVADOR01
Form routine: ENTRY
Form: R2RBL_SDORC_L
*PDF/SmartForm Form: *******Blank
*Type: ******Blank
Regards
GK.
Edited by: Gnana Kumar on Nov 17, 2010 5:24 AM -
Problems with Print Program of Production Order (CO03) !!
Hi all,
I have a question about Print program of Production Order. I created a new Order in CO01. Then, in CO03, I call Print Program ( menu <b>Functions >> Print</b>). At the first time, it printed a so-called original version. Later, when i printed it again, it informed me that just was a copy. Now, that's ok.
I made some modification of Print Program by copying and changing the code (let's call it Z_PSFCOBJL) and SAPScript form. However, When I call Print function in CO03 for that Order, it didn't show any changes which I made. What's wrong? I checked in the code by debug mode, the variable that I transfered to the form was correct with its value.
<b>I think that because SAP just make a print copy so that it will not reflect any changes that I made to the program, right? Is there any way to overcome this because I don't want to create new Orders just for testing every modification</b>?
Thank you in advance.Hi MURUGESAN THANGATHURAI ,
Yes, I did assign the new program and new form for this before printing. But I wanna know if there is any way that allows me to view those changes I made?
When I change the code in Print Program, print-out includes this update (although it still informs me that is a copy version). But when I make changes in the SAPScript form (for example, adding a variable for display), <b>it will not update this</b>?
What's problem?
Thank you guys.
Maybe you are looking for
-
what to do?
-
Ipod not showing up in Itunes on Mac computer
When I plug in my ipod touch to my computer it does not show up in Itunes. do I need to reset my ipod touch? Help!!! I have done all the things to troubleshoot this situation other than reset my ipod. I am afraid to do this. I don't want to loose any
-
How do I stop Firefox from archiving conversations after I send a message to someone?
When someone sends me an email and I reply, the conversation automatically goes to the archive. I can retrieve it by clicking on the 'undo archive' link, but I want it to stop archiving things in the first place. It seems to do it no matter who the c
-
Webcam: Logitech QuickCam Vision Pro
OS: latest Lion 10.7.2 Issues: The above webcam no longer has an audio channel when recording is done using the QuickTime application. Switching over to the latest iMovie '11, when I click on the camcorder icon, it says "No camera connected" Going to
-
Finding the RIGHT SSD (compatibility)
I have a mid-2009 MacBook Pro with the Nvidia MCP79 AHCI SATA controller. I had an OCZ Vertex 2 which was awesome but failed so I tried to replace it with an ADATA but that will not negotiate at 3GB/s. I was going to try checking the xbench database