Smartform print program for order confirmation

Hi experts.
I am looking for a smartform print program for order confirmation.
The order confirmation in standard is a script with the name RVADOR01 and I tried to copy and change but I don't know which to eliminate and whcih to keep it.
If any body written the program already please provide me or provide the link to check.
Thanks in advance
Sai

this is the processing form.
form processing.
data: lf_fm_name            type rs38l_fnam.
data: ls_control_param      type ssfctrlop.
data: ls_composer_param     type ssfcompop.
data: ls_recipient          type swotobjid.
data: ls_sender             type swotobjid.
data: lf_formname           type tdsfname.
data: ls_addr_key           like addr_key.
data: document_output_info type ssfcrespd,
        job_output_info type ssfcrescl,
        job_output_options type ssfcresop.
perform get_data.
check retcode = 0.
perform set_print_param using      addr_key
                            changing ls_control_param
                                     ls_composer_param
                                     ls_recipient
                                     ls_sender
                                     retcode.
*Get the Smart Form name.
if not tnapr-sform is initial.
    lf_formname = tnapr-sform.
else.
    message e001(/smb40/ssfcomposer).
endif.
determine smartform function module for invoice
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname           = lf_formname
    importing
      fm_name            = lf_fm_name
    exceptions
      no_form            = 1
      no_function_module = 2
      others             = 3.
if sy-subrc <> 0.
error handling
    retcode = sy-subrc.
    if sy-subrc = 1.
      message e001(/smb40/ssfcomposer).
    endif.
    if sy-subrc = 2.
      message e002(/smb40/ssfcomposer) with lf_formname.
    endif.
    perform protocol_update.
endif.
call function lf_fm_name
    exporting
      archive_index        = toa_dara
      archive_parameters   = arc_params
      control_parameters   = ls_control_param
      mail_recipient       = ls_recipient
      mail_sender          = ls_sender
      output_options       = ls_composer_param
      user_settings        = ' '
      is_nast              = nast
      is_vbdka             = vbdka
      is_addres            = addr_key
    importing
      document_output_info = document_output_info
      job_output_info      = job_output_info
      job_output_options   = job_output_options
    tables
      it_vbdpa             = tvbdpa    "Item information
      it_vbdpau            = tvbdpau   "Subitem numbers
      it_vedpa             = tkomservp "Contract Item Validity
      it_vedka             = tkomservh "Contract Header Validity
      it_vedpn             = tkomservpn "Contract Item Cancellation Data
      it_vedkn             = tkomservhn "Contract Header Cancellation DA
    exceptions
      formatting_error     = 1
      internal_error       = 2
      send_error           = 3
      user_canceled        = 4
      others               = 5.
if sy-subrc <> 0.
    retcode = sy-subrc.
    perform protocol_update.
get SmartForm protocoll and store it in the NAST protocoll
    perform add_smfrm_prot.
endif.
endform.                    "processing

Similar Messages

Standard print program for order confirmation

Hi All,
I have created smartform for sales order confirmation,now i want to attach it to output type i need standard print program for order confirmation.Do we have any standard program for the same ?
Thanks in advance
Shrila

Hi Shrila,
refer to the thread below:
Order confirmation smartform
With luck,
Pritam.

What is the predefined form and program for 'order conformation'

please give me details

hi
the print program for order confirmation is
'RVADOR01'
and the form name is 'RVORDER01'
if u find it useful mark the points
~~Guduri

Contents of a custom print program for a custom smartform

Hi...
Can you please tell me if we are writing a custom print program from scratch for a custom smartform for which there is no standard form available what are all the things that need to be coded in the print program..
My doubts on this are if we are configuring this form for output types of PO purchase order for mediums 1,2, 5 and 6 does any extra coding need to be done in the print program that is related to these mediums or is it just a configuration issue..
Apart from data retrieval part and call the function modules to send the data to smartforms what are the other things that we need to code in a custom smartform.. Anything that we need to code related to printing issues..
It would be great if someone can post a custom print program for any output type valid for mediums 1, 2, 5 and 6.
Also my last doubt is do we need to do anything in SE11 in designing a smartform and in what context do we need it...
Thanks and appreciate your help... Surely will reward for all the helpful answers..
Thanks again..
Kanthi..

Hi,
yes you need to create your own print program. You need to catch printing information and to send data to your smartforms.
To send data to your smartforms you need to use structure describe in the data dictionnary.
This is a peace of code for sending information to a smartform that will be print used an external program (Esker)
DATA: it_data       LIKE TABLE OF zssf_bl WITH HEADER LINE,
        w_formname TYPE tdsfname ,
        w_fm_name TYPE rs38l_fnam ,
        is_output TYPE ssfcompop ,
        is_control TYPE ssfctrlop ,
        is_job_out TYPE ssfcresop .
* Récupère le nom du module fonction.
MOVE 'Z_BL_STT' TO w_formname.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = w_formname
    IMPORTING
      fm_name                  = w_fm_name
    EXCEPTIONS
      OTHERS                   = 3.
* Prépare les paramètres d'impression.
is_output-xsfcmode   = 'X'.
is_output-xsf        = 'X'.
is_output-xsfoutmode = 'S'.
is_output-xsfoutdev = 'DOCL'.
is_output-xsfformat = 'X'.
is_output-tdnoprev   = 'X'.
is_output-tdnoprint = ' '.
is_output-tddest     = 'DOCL'.
is_output-tdprinter = 'PLAIN'.
is_output-tdnewid    = 'X'.
is_output-tdimmed    = 'X'.
is_output-tddelete   = 'X'.
is_control-no_dialog = 'X'.
is_control-preview   = ' '.
is_control-no_open   = 'X'.
is_control-no_close = ' '.
* Prepare le formulaire
CALL FUNCTION 'SSF_OPEN'
    EXPORTING
      user_settings      = ' '
      output_options     = is_output
      control_parameters = is_control
    IMPORTING
      job_output_options = is_job_out
    EXCEPTIONS
      OTHERS             = 5.
* Appels du formulaire.
CALL FUNCTION w_fm_name
    EXPORTING
      control_parameters = is_control
      output_options     = is_output
      is_bl              = zbl_soustrait
    TABLES
      it_data            = it_data
    EXCEPTIONS
      OTHERS             = 5.
You need to catch information from the NAST table maybe
Rgd
Frédéric

Standard smartform and print program for sales document

HI All,
Is there a standard smartform and print program for sales document or sales order. If someone has worked with it do reply.

Hi Shashank,
What exactly you would like to print for Sales Orders in Smartforms..?
regards,
Ram.

Standard smartforms for order confirmation

Hi all
i search the standard smartforms for order confirmation. What's the name for this form....
i have only find for invoice LB_BIL_INVOICE and for Delivery LE_SHP_DELNOTE, but not for oder confirmation....
thx abap_begin....

Hi,
For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
Regards
Dillip Sahoo

Standard print program for fi invoice smartform printing

Hi friend,
Is there any standard print program available for printing FI related invoice .
I want print program for printing smartforms.
I want to know any method for searching the standard print program for printing smartform in Fi module.
Thanks & Regards,
Sathish

Hi,
FI related Forms will be configure in SPRO.
Goto SPRO and FI related applivcation.
There you will find the related forms and programs.

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

Using standard PO Printing Program for Smartforms

Hi Experts,
I am some hiccups coding my print program for a PO Smartform that am currently working on.The requirement was to use the standard print program to trigger my Smartform PO. I have read alot of threads on this, but am still clueless.
Some says to comment out the functions like "OPEN_FORM" ,"WRITE_FORM" and having your block of codes inside the "NEU_" routine.
But I noticed, there are even some conditions and logic checking before the "write_form" is called and sometimes the table entries are also cleared. In this kind of situation, how should I be passing the table data to the Smartform function module?By copying the contents to an internal table? And there are many include programs which currently the standard program has, should I be using all that too?
Appreciate your input and advice on this.
Thanks very much.

Hi Neesha,
Can you check this once
[Migrating Forms|http://help.sap.com/saphelp_nw04/helpdata/en/9d/9599386185c064e10000009b38f8cf/content.htm]
Regards,
Madhu.
Edited by: madhurao123 on Dec 21, 2011 9:18 AM

How to write print program for smartforms

Hi all
I need to develop new smartform and its print program.
But Im not experience in writing print program for smartform.
Ive gone through the simple print program sample that use only one table as input and one table for output.
But my smartforms require few tables for input and output.
How should I define the Data?
Can anyone guide me on how to write it.
Thanks & Regards
az

Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Reward points...

To find print program for smartforms.

pls tell me how to find print programs for smartforms.pls tell me with all steps.clearly.i tried with tanpr table but unable to find

hi,
Please take a look at the NACE transaction where all the output conditions will be configured. Drill down into you specific application and you should be able to find the print program as well as the smart form name.
Steps..
Use NACE and follow procedure as follows
1)Choose Application from list(eg PO)
2)Click OP type
3)Chose one OP type from Right pane.
4)Click on processing routines
and you got it
regards,
keerthi

Need Print Program for Smartform /SAPSLL/SF_GL_EPL for Export Packing list

Hello Friends,
I need a print program for Smartform /SAPSLL/SF_GL_EPL for Export Packing list. Please reply ASAP.
Thanks,
Ziad.

Hi Sowjanya,
I am using FUEP o/p type for Export Packing list for Billing . I Copied SAPscript SD_EXPORT_FUEP form and the print program for this is same RVADAUS1. Can we use the same print program for Smartform /SAPSLL/SF_GL_EPL?
Thanks,
Ziad

SDQ segment for Order Confirmation

hai all
customer sends in purchase order with only one line item but has 10 ship to party with their respective quantity. this is done with help of ILN(international location no).we have custom segment below E1EDPA1, which has ILN, qualifier for ILN, quantity, UOM fields init.
Individual sales order is created for every ship to party and order confirmation idoc is also created and collected. Now with custom program i have to create single idoc with custom idoc type ZORDERS05 with all
the collected idocs, which should have only one line item and all ship to paty in ILN(custom segment). can any one help me in this matter. if you have any code for this scenario pls provide.
thanks and regards
vijay

Hi,
For the printing of the order confirmation there is a standard script RVORDER01. You can find this in transaction NACE by choosing application as V1 then output type as BA00 and then Processing routines.
Regards
Dillip Sahoo

Print programs for (print) interactive forms

Hello,
I am looking for an (any) interactive form and the print-program belonging to this form.
It can be any form from any moudule, as i only need it for testing purposes.
Thank you!

Hi,
My requirement to migrate puchase order smartformto Adobe interactive form.
I have mgrated my purchase order smartform to Adobe interactive form,
activated form and interface.
Question: How do i trigger or my adobe interactive form purchase order in R/3.
I want to trigger the form from me22n -> print privew..
I have configured in NACE (Output type customization) with same samrtform print program with adobe form and Type as PDF. But the adobe form is not trigering at all.. Can any know how do i trigger adobe form from ME22n.
Is there any special print program for this please let me know..
thx

Ho to find script and the related print program for print preview of PO

Hi All,
We are getting some text output on the print preview of a purchase order.
How can we determine the driver script and the corresponding print program for this.
Can you please guide on this.
Thanks in advance.
Regards,
Sanjeet

U Can check Driver program and form related to that program table is TNAPPR
Goto NACE t.code
Selct Application ---> click on output types
then u wil get one window there select proper output type and
double click on processing routines u wil get form name and related driver program name also
Plz try this....
Edited by: Upender Verma on Feb 9, 2009 1:33 PM
Edited by: Upender Verma on Feb 9, 2009 1:37 PM

Smartform print program for order confirmation

Similar Messages

Maybe you are looking for