Order fill rate formula

Hi,
I have a very simple formula that I'd like to come up with the percentage amount of all items shipped.
I'm dividing the ship quantity per ordered quantity but I'm getting the division by zero message.
Here's the formula, can anyone help me? Thanks in advance!
{CUSTINVOICETRANS.QTY} / {SALESLINE.QTYORDERED}

Jack,
if sum ({CUSTINVOICETRANS.QTY}) = 0 then 0 / sum ({SALESLINE.QTYORDERED})
The ones where the quantity=0 are 0 because
0/anything will be 0   ...as for the others, I don't know.
You cannot divide BY 0, so you need to check ({SALESLINE.QTYORDERED}) for 0.(...and ALWAYS for Null).
If IsNull(({SALESLINE.QTYORDERED})) or
   ({SALESLINE.QTYORDERED}) = 0 Then
   0
Else
   place calcs here...
Hope this helps,
The Panda

Similar Messages

  • What is Customer order Fill rate process and how we calculate that .

    Hi All,
    Please provide me idea of Customer order Fill rate process and how we calculate that .
    Thanks

    Quote
    Originally posted by WarLord
    I like this HD tool. i use it everyday now. the tempture readings are great Hd temp cpu temp and even the system temp nice added feature to the monitoring. And this is an alternative to enabling the SMART in the bios? Thats the way im understanding it. is that right Maesus ?Because i have disabled in bios. She went threw alot of trouble here. thank you  
    Well from my observation, whether SMART is disabled or enabled in the BIOS, SMART is always working within the HDD itself.
    Basically SMART is acting like a blackbox, monitoring and tabulating HDD condition from time to time and its attributes only fully revealable by the manufacturers. SpeedFan's SMART status only displays partial information that is displayable. Some attributes are hidden, ~OR~ the attributes' locations are different from one HDD to another brand, such that some values don't correspond to the attribute meaning at all.
    It is very doubtful to claim that enabling SMART in the BIOS will hog down the performance. Just like a transport bus (yeah real bus that fetch passenger :P ), with or without the black box installed can't help it if the driver wants to speeding. :P

  • Shipping order Fill rate report

    Hello guys, I dlike to know which infoprovider would be best suited to get Fill rate information, knowing that fill rate is the first shipment item divided by the total order item.

    Thanks for that answer, I do have some algorithm, that goes like this: fill rate is FIRST shipped order divided by the total order. Now the trick part is Fill rate shouldnt not change value if there are x amount of shipment after that first shipment to complete the order. This is where I dont know whether (and how) to implement that in a routine, or at bex level.

  • Hello, where I can find numbers about the eCPM & fill rate ?

    I'm a french 18 years old, and in order to release my app, I need to get more "official" information about the eCPM & fill rate (like the average fill rate) with iAd or whatever.
    Thank you for your help !
    J.N

    RSRPARAMETRIZA for Bex Analyzer 7.0
    RSRVARIANTDIR     for Bex Analyzer 3.x
    RSRVARIANTDIR     Directory of Variants for Queries and Selection Objects               
    RSRVARIANT             Variant Values BEX               
    We can access to value of one variant with name of query COMPUID (from RSRT --> Technical Informatione -->Data from Query Definition  --> Techn. Definition Name) or with the name of Variant from RSRVARIANTDIR (the same for the technican nema of query COMPUID)
    Edited by: Pierfrancesco Marvulli on Aug 31, 2011 3:23 PM

  • AFS - Allocation Run Fill rate

    Hi everyone,
    When executing the J3AT tcode, i need to bring in a custom fill rate that will override the global setting for the Header Minimum Quota (screen field:  J_3ASIMU_S-PERCT_K) for different Sales Organizations without using the ARun "release strategy" on the customer master or assigning a "Release" rule to Sales Orders.
    I have reviewed OSS note 722823, but none of the described userexits appear to provide the desired functionality. Can anyone point me towards the correct user exit please?
    Thanks.
    Edited by: Rob Joubert on Apr 8, 2011 6:29 PM

    You could refer to the SAP help documentation which is http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
    Hope this helps
    Regards
    Manthan.

  • Fill rates in SAP

    Hi Experts,
    In SAP terms please can you explain as to what 'Fill Rates' mean.
    i came across this term while going through the SAP AFS doc, which states while doing Allocation Run of the SO release checks are done at the end where it checks **fill rate** of the line item on the order.
    Regards,
    Mithun

    Fil rate is a delivery performance metrics which is used to determine Safety Stock. Lets assume you receive an order for 100 quantituies and Customer Req. Del. date is July 10. you ship only 70 items on July 7. In this case your fill rate is 70%.
    I hope this might help you understand what fill rate is.....If you google you will find n no. of documents on Fill rate.

  • Fill Rate

    I need to print a monochrome logo in three different "fill rates" (not sure if I'm using the correct term). Anyhow, I have the original image drawn in Illustrator and opened it on Photoshop. Considering the original image has 100% fill rate, I need to have two more copies of the image where the pixels are 75% and 50% filled. The goal of this is to save ink but still be able to recognize the image - the resolution has to be 128 dpi and bitmap mode.
    I can't figure out how to bring the original image to 75% and 50% fill rate. Basically trying to make a monochrome grainy image.
    Any tips??

    Your screenshots may have been removed.
    You could reduce the layers’s Opacity in the Layers Panel.
    Otherwise a Curves Adjustment Layer could be emplyed to affect different values differently.
    As you talked about blue ink – is this supposed to be printed with spot colors?

  • Query Tables Does Not Fill Down Formulas When Refreshed

    I have used external data queries for several years, connecting to a variety of data sources, but most frequently to SQL server 2005 using MS Query and ODBC. Anyway, in Excel 2007, when I refresh my queries and the data range adds new
    rows to the query table, the formluas do not fill down past the previous extent of the data range. These are not external queries converted from a previous version of Excel; I built them in Excel 2007, and the issue persists across multiple workbooks.
    To answer the inevitble suggestions:
    1) The formulas are definitely in the query tables, not adjacent.
    2) "Extend data range formats and formulas" is enabled in the advanced tab of Excel options.
    I've found threads on other sites where users had similar problems, but have not seen a satisfactory solution or even a good response to their inquiries. Any ideas?
    P. Dolan
    Stat Analyst, TN Dept of Safety

    I have the same issue with excel 2010.  To answer Ryan's last question,  Excel does seem to consider all the added rows as begin part of the table.   On the pre 2007 queries, there was an option under 'External data properties'
    to specify whether you wanted the formulas to copy down to the new rows. When this option was selected, it worked without fail.  Under 2007 and 2010 this option no longer appears, but most of the time the formulas do copy down properly, but eventually
    something happens to cause this to stop occuring.  The only fix I have found is to recreatet the whole query again.  It then works for awhile and then stops working at some point. I wish I could isolate what causes it to stop, but I haven't been
    able to figure it out.
    Same with me and Excel 2010.  The help refers to the option, but my dialog box does not have it.  (Another option that has disappeared is the ability to get column headers derived from the returned query.)
    Excerpt from help:
    On the Data tab, in the Connections group, click
    Properties.
    In the External Data Range Properties dialog box, select the
    Fill down formulas in columns adjacent to data check box.  

  • IAd Fill Rates Massive Drop?

    iAd fill rates are low as any of you using iAd know but yesterday my app had the worst fill rate of all time, 0.87%, 52K requests and 457 impressions. Today its at a solid 0%.
    Has anyone else noticed this or is this a one off issue?

    Hi AEON, 
    I was expecting a drop after the holiday season. Just not as drastic a drop. The MONTHS before (not weeks) Christmas have been pretty constant, though slightly lower than December (up until Christmas). 
    It just kind of seems like there is absolutely no ads to serve anymore. 
    I have opened a ticket as Achal suggested. Just checking this is not a bug or reporting issue. 
    If it's not it'd be pretty miserable performance and would make me reassess using pubCenter altogether.

  • Fill rates plummeted?

    The fill rate for the ad in my app seems to have plummeted after the 26th of December last month and has remained simply horrible. 
    The ad used to have a fill rate of between 4% and 20%. It has dropped to 0.15%-0.54% since the 26th. All other metrics seem to be stable or on the rise. 
    My question: is anyone else seeing such a drastic drop in fill rate? 
    The horrible fill rate is just decimating revenue. :( 
    UPDATE 15/02/2015:
    Just a quick update on this - 2 months on and revenues are still terrible. Fill rates are way down and so is eCPM. I get seasonality and all, but having monthly revenue drop to 3% of previous months (with increased requests) is just terrible. 
    I do have a fallback to AdDuplex in place, so at least PubCenter's failure to provide content is picked up by that. 

    Hi AEON, 
    I was expecting a drop after the holiday season. Just not as drastic a drop. The MONTHS before (not weeks) Christmas have been pretty constant, though slightly lower than December (up until Christmas). 
    It just kind of seems like there is absolutely no ads to serve anymore. 
    I have opened a ticket as Achal suggested. Just checking this is not a bug or reporting issue. 
    If it's not it'd be pretty miserable performance and would make me reassess using pubCenter altogether.

  • Get 100% fill rate with ads

    Hello, I am using flash cs5.5 to create a mobile app. I would liek to add ads and have added the technique that is all over the internet on how to add ads to adboe air apps, using a seperate .html file.  So it all works and I have it set up with admob, the problem is admob doesn't whave a great fill rate, about 15% after hundreds of requests. If I want to add mediation with ad networks that admob doesnt support I have to create a custom event, but it only shows you how to add it using real Android SDK, and not flash cs5.5. I am very new to this, idealy I would like to add my leadbolt account(html based ads) to the my admob account which at the moment admob doesnt support. My main objective is to simply get 100% fillrate and i dont care with what networks or how many.
    Cheers

    Hi David,
    I see the issue you're having on your website. I'm having trouble reproducing it myself. Can you please send your file so I can take a closer look at what is happening? You can send it to [email protected] with the subject attn:Dana and include a link to this thread.
    Thanks,
    Dana

  • First Time FIll Rate Report in BI

    Hi SAP Gurus,
    Has anyone ever developed First Time Fill Rate report in BI. If yes. Please share how did you do that.
    Thanks and Regards

    First Time Fill Rate report in which context? I meant in respect to which field. Delivery ?
    And what is the definition of First Time Fill Rate in your organization. Definition differs company by company.
    - Danny

  • Requests and Fill Rate since Dec 17th are not final

    Hi All,
    The request and fill rate, as shown in pubCenter, for Windows phone apps, is not final since 17th Dec 2014, and it may change.
    The same has been indicated in reports using the grey shaded region.
    pubCenter team is working on getting the final numbers and we hope to get it soon.
    Thanks,
    Achal

    What happened to yesterday's requests #? Our analytics show we have increased active users and time for each session for yesterday (2015-01-01) but pubCenter shows the # of requests is only 60% as usual. Although it is not finalized, the difference is
    too much.

  • FILL RATE DEFINITION & USAGE IN SAP

    Hi Experts,
    Can anyone send me relevant information regarding SAP definition of FILL RATE, its calculation and other useful links or documentation. Preferably for AFS Solutions.
    Thanks ALL,
    uday

    Closed as NOT ANSWERED

  • Inventory Turnover Rate formula

    Hi;
    I want to see turover rate formula in SAP back system. How Ican I see it?

    Inventory Turnover = Cost of Goods Sold (COGS) / Average Inventory at value
    Please check MC44 report for the same.
    Reagrds,
    Sandesh Sawant

Maybe you are looking for