Order in message processing in XI

Hi all!!
I have a problem.
I have a client ABAP Proxy that is called from R3. If this Proxy is call in several times in a loop (30 by example), the 30 messages come to XI in the same second, and XI process them in a ramdon order, not in the sending order.
Is there any way to control this without using BPM?
Thanks and regards,
Manuel.

Hi,
Since these are asynchronous messages, they will be executed in random order. One option is to try EOIO quality of service in communication channel.
Regards,
Siddhesh S.Tawate

Similar Messages

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Error in VA01 - "Sales order cannot be processed. Check customer type."

Hi,
While creating a Sales Order in VA01, I receive this error message - "Sales order cannot be processed. Check customer type."
Could you please tell me what could be the reason for this.
Thank you,

Hi,
U Can Find the Customer Type in Extras> Account Group Information> Customer Types.
There U can Make the Customer Type.
Regards..
Praveen Kumar.D

You cannot make an assignment to make-to-order stock - Message no. CO684

Hi,
During conversion of planned order to production order in variant configuration scenario I am getting following error message....
You cannot make an assignment to make-to-order stock
Message no. CO684
Diagnosis
The component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistent.
System response
The following responses are possible:
Order processing is canceled.
The system resets the special stock indicator back to the original value.
Procedure
Choose another order type.
Any ideas or suggestions to correct this issue..
Pavan

Hi Pavan,
This is one of the most common problem comes during MTO execution.And the real problem is massage no itself because you will get the same massage no. for many reason and that's it becomes more difficult to find out root cause.
Check below threads and settings,
- Order type for MTO is not maintain in Production scheduling Profile.Go OPKP or CORY and maintain Order type for MTO to it.
- [Thread 1|Error Message while cretaing a Process Order;
- [Thread 2|Error in Variant Configuration CO684;
- [Thread 3|error information when covert plan order to production order;
- [Thread 4|You cannot make an assignment to make-to-order stock;
Regards,
Dhaval

Correlated message processing and QOS in BPM

Hi,
I need one clarification w.r.t correlated message processing within integration process.
Is there any relationship between the QOS and correlation w.r.t message processing inside the BPM ?
In otherwords, will the QOS automatically changed to EOIO in BPM while processing correlated messages ?
I appreciate your reply.
Regards
Venkat

Hi,
In case of multiple messages to same receiver the QOS will change automatically....EO to EOIO
For more details:
http://help.sap.com/saphelp_nwpi71/helpdata/en/28/68073c8e56f658e10000000a114084/content.htm
This happens to make sure that you get the required message at the required point...Exactly Once IN ORDER
Regards,
Abhishek.

EDIFACT D98A Inbound Message Processing Error

Hi
I have been setting up an EDI B2B G/W using 11g B2B PS3 (Host & Partner). I have created the ECS, XSD and XML files using the B2B Document Editor and have completed the partner setup for D98A Purchase Order.
I had the issues when I posted the PO where the Host is unable to pick up the agreements and I was getting B2B-51507 Payload Validation Error and the message was failling at the B2B Host.
Later I changed the payload in-line with the below thread and removed the Internal Properties
https://forums.oracle.com/forums/thread.jspa?messageID=11039032#11039032
upon which the messages was sent to RemoteTP but failed with B2B-50037: B2B inbound message processing error
When I analyzed further I could see the InternalPropertes sent by the Host to the RemoteTP are with empty values.
I would like to understand the point of removing the InternalProperties and why B2B Host is not sending it in the right format to the other B2B.
I am pasting the file that is been received at the RemoteTP which failed with B2B-50037: B2B inbound message processing error
<?xml version="1.0" encoding="UTF-8"?><Transaction-CONTRL xmlns="urn:oracle:integration:b2b:9FF110DDDB0C424F8B4C5A0F73EF6547" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="EDIFACT" Version="D3" CreatedDate="2013-05-31T13:41:20" CreatedBy="XEngine_2133" GUID="{65236268-C9EF-11E2-BC04-E4115BAD2692}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">1</Lookup><Lookup Name="InterchangeReceiverID"> </Lookup><Lookup Name="InterchangeReceiverQual"></Lookup><Lookup Name="InterchangeSenderID"> </Lookup><Lookup Name="InterchangeSenderQual"></Lookup><Lookup Name="Standard">EDIFACT</Lookup><Property Name="InterchangeSyntaxVersion">1</Property><Property Name="ReleaseCharacter">0x3f</Property><Data-Structure Name="Group"><Lookup Name="GroupID">CONTRL</Lookup><Lookup Name="GroupReceiverID"> </Lookup><Lookup Name="GroupReceiverQual"></Lookup><Lookup Name="GroupReleaseNumber">3</Lookup><Lookup Name="GroupSenderID"> </Lookup><Lookup Name="GroupSenderQual"></Lookup><Lookup Name="GroupVersion">D</Lookup><Property Name="GroupID">CONTRL</Property><Data-Structure Name="Transaction"><Lookup Name="TransactionID">CONTRL</Lookup><Lookup Name="TransactionMessageReleaseNumber">3</Lookup><Lookup Name="TransactionMessageVersionNumber">D</Lookup></Data-Structure></Data-Structure></Data-Structure></Internal-Properties><Segment-UNH><Element-0062>#ControlNumber(Transaction)#</Element-0062><Composite-S009><Element-0065>CONTRL</Element-0065><Element-0052>D</Element-0052><Element-0054>3</Element-0054><Element-0051>UN</Element-0051></Composite-S009></Segment-UNH><Segment-UCI><Element-0020>1051</Element-0020><Composite-S002><Element-0004> </Element-0004></Composite-S002><Composite-S003><Element-0010> </Element-0010></Composite-S003><Element-0083>4</Element-0083></Segment-UCI><Loop-Group_3><Segment-UCF><Element-0048>1051</Element-0048><Composite-S006><Element-0040> </Element-0040></Composite-S006><Composite-S007><Element-0044> </Element-0044></Composite-S007><Element-0083>4</Element-0083></Segment-UCF><Loop-Group_4><Segment-UCM><Element-0062>1</Element-0062><Composite-S009><Element-0065>ORDERS</Element-0065><Element-0052>D</Element-0052><Element-0054>98A</Element-0054><Element-0051>AA</Element-0051></Composite-S009><Element-0083>4</Element-0083><Element-0085>18</Element-0085></Segment-UCM></Loop-Group_4></Loop-Group_3><Segment-UNT><Element-0074>5</Element-0074><Element-0062>#ControlNumber(Transaction)#</Element-0062></Segment-UNT></Transaction-CONTRL>
Has anyone encountered such issues? Is there any additional properties that are needed to be configured?
Regards
RD

Hi Anuj
this is the stack trace
<02-Jun-2013 12:50:47 o'clock BST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-50037: B2B inbound message processing error
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3283)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1764)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4179)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3855)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3328)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:610)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:192)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
the xml i posted is the one that is logged by the remote TP in the trace logs before the error occurrence,
Regards
RD

Order is being processed - does that mean im not going to get my phone?

Hello Im gloria ownby im on a prepaid plan thursday i got on a two year agreement and got a free phone I started checking the progress of my order and it say that my order is being processed what does that and it still says that today am i gonna get my phone or does it mean im not gonna get it thank you
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

My name is Gloria (removed) it is may 1st I ordered my phone April the 24th I still haven't got it my confirmation # is (removed) could u please let me know what's going on am I gonna get my phone Ty Gloria (removed)
Sent from my LG Mobile
Private info removed as required by the Verizon Wireless Terms of Service
Message edited by: Admin Moderator

Cancel a Sales Order via IDOC processing

Hello,
I am trying to cancel an item within a sales order using ORDERS05 (IDOC_INPUT_ORDCHG).
My IDOC contains the following data:
E1EDK01-ACTION = 003 (Changes in one or more items)
E1EDK02-QUALF = 002 (Vendor Order)
E1EDK02-BELNR = SAP Sales Order Number to be updated.
E1EDP01-POSEX = SAP Sales Order Item Number to be deleted (eg. 000010).
E1EDP01-ACTION = 003 (Item cancelled)
E1EDP19-QUALF = 002 (Material number used by vendor)
E1EDP19-IDTNR = SAP Material Number of Item to be deleted
However it does not seem to be working correctly. Instead of removing the item from the sales order - it actually creates a new item.
Has anyone had any experience with successfully cancelling an item using IDOC processing?
Any assistance would be greatly appreciated.
Thanks and Regards,
Corinne

Hi Corinne,
I don't think you'll get back the response you want from SAP. This idoc was originally created to support the EDI scenario where your customer makes a change to their purchase order. The EDI message would be sent to SAP to update the corresponding sales order in your system (after being mapped to an Idoc).
As your customer does not normally not have your sales order item number in their system, they can only send their own purchase order item number. SAP then uses this number to look up the corresponding SAP sales order item number via the VBAP-POSEX field (which in this scenario is originally populated by the Idoc which created the order from the customers original purchase order EDI message).
So, I dont think SAP will change this functionality. They may offer, however, a work around!
What I still think is strange though, is that, having not found a match for your item on the POSEX field, SAP ignores the deletion flag and adds a new item to your order. At the very least you would expect it to just ignore the item (a quick look at the code in 4.7 seems to imply that this is what SAP is trying to do - maybe a change from your version?).
Hope that helps.
Brad

Set Message Processing Queue based on input payload

Hi all..
Can i set the message processing queue from graphical mapping?
Receiver system in my scenario is ECC.Whuile sending messages to ECC, i need to send the message related to a particular ORDER Number in a particular queue.
for EX: if ORDER Number from my input payload is 457 i want to set the queue as ABC457.
Please let me know how to get it done from mapping or if there is any other approach.
Thanks
Manohar

Hi Ram,
What do you mean by Queue here?? we can check condition in mapping level only based on ORDER Number we can send message to receiver.use enhance receiver determination.
Regards,
Raj

Stopping the service order from further processing

Hi Experts,
According to my requirement, the service orders will be generated by the call centre agents , then they will release and the technicians will be determined . The pager messages will go to the technicians.
But the service order whic are generated after 5 PM , we should not send the messages to the technicians althought the service orders are released.
For this where should I do the coding , which is the exact place to stop the service order from further processing.
Please help me out in this.
Thanks in Advance,
Praveen

Hi,
The best way would be to implement a ORDER_SAVE Badi..wherein u can stop a service order for further processing based on the status..
Regards,
PePe

Order Cannot be processed at this time!

Hi,
I have spent months making a few books for Christmas. Now, I click buy book and it says order cannot be processed at this time, I have tried several times. What is going on and how do I fix it?

Was that all there was to the message you got?

Tried out samples and order of messages not maintained

I tested out some of the samples from the JMS tutorial and I got some strange results. The first example in there creates a queue, a sender, and a receiver. The sender enqueses 10 messages (strings "1" through "10"). And the receiver dequeues and displays everything it gets. I was impressed with the fact that I can enqueue 10 messages and start the receiver later and still get my 10 messages back. Then I tried this: (1) run sender (i.e. enqueue "1" through "10"), (2) run sender again (i.e. enqueue "1" through "10"), (3) run receiver. This time it printed "1", "1", "2", "2", ... , "10", "10" instead of "1", "2", ... , "10", "1", "2", ... "10". Why isn't the order of the messages enqueued maintained?
- Mike

Message priorities
You set the priority of a message (in the Priority field of the MQMD structure)
when you put the message on a queue. You can set a numeric value for the
priority, or you can let the message take the default priority of the queue.
The MsgDeliverySequence attribute of the queue determines whether messages on
the queue are stored in FIFO (first in, first out) sequence, or in FIFO within priority
sequence. If this attribute is set to MQMDS_PRIORITY, messages are enqueued
with the priority specified in the Priority field of their message descriptors; but if
it is set to MQMDS_FIFO, messages are enqueued with the default priority of the
queue. Messages of equal priority are stored on the queue in order of arrival.
The DefPriority attribute of a queue sets the default priority value for messages
being put on that queue. This value is set when the queue is created, but it can be
changed afterwards. Alias queues, and local definitions of remote queues, may
have different default priorities from the base queues to which they resolve. If
there is more than one queue definition in the resolution path (see �Name
resolution� on page 99), the default priority is taken from the value (at the time of
the put operation) of the DefPriority attribute of the queue specified in the open
command.
The value of the MaxPriority attribute of the queue manager is the maximum
priority that you can assign to a message processed by that queue manager. You
cannot change the value of this attribute. In MQSeries, the attribute has the value
9; you can create messages having priorities between 0 (the lowest) and 9 (the
highest).
Above is the documentation given for your problem in "ApplicationProgramming guide".
Even I have tested by running sample program.
It gives me FIFO only

What is stateful and stateless message processing

What is stateful and stateless message processing ?
When it is used ?

Hi
Before going to Statefull or Stateless...u have to know about java and EBJ and what is session as well.
Basically we are using 2 S in EBJ.It is nothing but persistance of data.
Statefull: It means data are persists in multiple sessions.
Stateless: It means data are persists in single session.
in simple terms
if you use BPM in your integration scenario then it is stateful.
without BPM can be considered as stateless.
Business Process Management provides SAP Exchange Infrastructure with functions for stateful message processing: The status of an integration process is persisted on the Integration Server. This means that you can specify how long an integration process must wait for further messages to arrive, for example. Furthermore, this enables you to process messages within an integration process further still; for example, you can collect certain messages and then send them in a particular order.
This basically means SAP XI as a EAI tool without the BPM provides stateless message. this means that one message coming in SAP is not dependtent on another message.
BPM in SAP XI is used to make messages stateful and this allows us to do functionalities like collecting message , splitting message, waiting for a message etc.
Refer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c656a9d-0901-0010-bcaf-fed14210c991#q-16
http://help.sap.com/saphelp_nw04s/helpdata/en/93/33b504f33cb9468bf35f8fbda11294/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c656a9d-0901-0010-bcaf-fed14210c991
thanks
Swarup

I ordered my iphone 6 8 days ago and I have noticed that there is no status change with it, the order is still "processing". I'm very frustrated and would like to know how much longer it will be "processing".

I have heard of people ordering their iphone 6's and having them shipped out in the next day. I understand demand is extremely high but I don't understand why it has to take this long for my order to be fulfilled.

mattminsch, I know that you're excited to get your new device and we are too. The demand for these devices would most certainly be high and depending on the model that was purchased. Currently for the time frame that was mentioned the ship date would be 10/31 for most models. Once the device has been set to ship only then would you see the order change from processing to shipped. Do you remember what model you purchased?
AdamG_VZW
Follow us on Twitter @VZWSupport.

Warning message is thrown,while raising a sales order Warning message:

When i am raising the sales order,warning message is thrown stating "No financial document",can any one solve the problem.

It is because, the said field (LCNUM) is made as mandatory in your settings. While creating sale order, go to header tab "Billing Document" where you can see this field. Press F4 and maintain the relevant licence reference.
It seems you were trying to create an export sale order where the terms would have been L/C. For information, to create an export L/C, the TCode is VX11N and once you give all the required data and save, system will pop up a reference. This reference number has to be assigned in sale order
thanks
G. Lakshmipathi

Order in message processing in XI

Similar Messages

Maybe you are looking for