Order Problems - No Broadband and No Help!

I ordered a calls, broadband, and tv package at the end of December, was given an activation date of 7th January, recieved all the equipment and the phone line started. I was told there was a delay with the broaddband and was given a second date of 16th January, but nothing happened.
I've been on the phone with customer service for over three hours over the last two weeks but nobody seems to know what's going on. I keep getting transfered around. I've emailed, but had a standard response and then a ' call back', the person calling back hadn't read the email. I keep having to explain everything over and over again.
Was finally told on Monday that a 'specialist team' was looking at the issue and that they would call me in 48 hours. Still no call. I've lost faith completely and honestly don't think anybody is looking at the issue.
I'm seriously thinking of canceling the whole order and starting again with another provider but I'm not sure whether I'd be entitled to the line rental I've already paid back (I paid for the whole year in advance). I think I should be because the only reason I paid for the line was to get broadband, and BT haven't provided me with the broadband.
Can anybody help me / provide advice? I'd be very grateful.
Regards,
Geraint

Hi gor0,
Thanks for your post and I'm really sorry to read about the delay in getting your broadband activated. Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll be happy to help you. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Syncing problems with Itunes and Ipod Help?

Okay..I don't even know what's been happening with the newest Ios 5 update for apple products, but since the update, my ipod hasn't been able to synch with Itunes.
For example, I manually organize all my music and when I edit the album artist or the album artwork etc, it would show up in Itunes perfectly, but on the Itouch, nothing has been changed. This means that not only does it now show the album artwork that I set up in Itunes, but also all the artists as well. I've seen many people so far having this problem, but through all the solutions people have said, none have worked for me. Another problem is that it also mix and matches all the songs I have downloaded as well. Only the songs I purchase seem to be alright.
I have tried many things from restoring my Itouch and re-downloading music, manually re-synching my Itouch to see if the artists will show up, but to no avail, it hasn't worked.
Please help me. It's getting quite frustrating that nothing is synching since the newest ios 5.1.1 update. Thank you

The ipod touch will only sync to one computer at a time. If you sync to another it will indeed erase the content from the ipod first, then replace with content from the new computer.
Sign into your account on the computer, make sure it is authorized, then connect the ipod:
Without syncing, File>Transfer Purchases

So many problems! Crashes and reinstall help?!

Hi everyone! I'm pretty much hopeless in technology so any feedback will be appreciated!
I have a MacBook pro 13' from late 2011. After I updated to Maverick, it started crashing frequently so within a month I updated it to Yosemite thinking it would help. The crashes got worse (like every hour) and when I took it in, they said it was a kernel panic. They deleted the program they thought was the culprit. However the crashes continued. I gave up and decided to wipe the entire drive and start fresh.
But now my original OS X Lion won't install due to an error. It says it cannot be installed at this time and I, being too impatient, did not back up anything into time machine before wiping the drive. Do I have to install Lion again before installing Yosemite?
I'm wondering if I can recover from this Mac OS X Base System on the Disk Utility? I'm so confused...
I'm abroad in South Korea right now and the nearest Apple store is in Japan (which I visited for my kernel panic problem). I think they have an authorized retailer here but not sure of the services they offer for software problems.
Any advice or solutions? Thank you in advance!
Sincerely,
-A sad graduate student who can't do her homework without Mac
*also my mac does not have a recovery hard drive

When I pull up the About This Mac tab, it has a picture of Snow leopard on a CD....i have a feeling that was my original OS. If I deleted everything, does this mean I must repurchase the software? =(
You need the SYSTEM DVDs that originally came w/the comp. If you do not have them,
you can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

Problem with XML and XSLT, help...

Okay, I have this XML doc (called stocks.xml):
<?xml:stylesheet type="text/xsl" href="stocks.xsl" version="1.0" encoding="UTF-8"?>
<portfolio>
<stock>
<symbol> SUNW </symbol>
<name> Sun Microsystem </name>
<price> 12.95 </price>
</stock>
<stock>
<symbol> HPW </symbol>
<name> Hewlet Packard </name>
<price> 53.50 </price>
</portfolio>
And I have this XSLT doc (called stocks.xls):
?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xls="http://www.w3.org/TR/WD-xsl">
<xsl:template match="/">
<html>
<head>
<title> Stocks </title>
<body bgcolor="#ffffcc">
<xsl:apply-template />
</body>
</head>
</html>
</xsl template>
<xsl:template match="portfolio">
<table border="2">
<tr>
<th> Stock Symbol </th><th> Company Name </th><th> Price </th>
</tr>
<xsl:for-each select="stock">
<tr>
<td>
<i><xsl:value-of select="symbol" /></i>
</td>
<td>
<xsl:value-of select="price" />
</td>
</tr>
</xsl:for-each>
</table>
</xsl template>
</stylesheet>
When I try to retrieve the stocks.xml document with
IE, the browser said, there is an error on line 2, can not
recognize xsl:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Reference to undeclared namespace prefix: 'xsl'. Error processing resource 'http://localhost:8080/examples/jsp/stocks/stocks.xsl'. Line 2, Position 71
<xsl:stylesheet version="1.0" xmlns:xls="http://www.w3.org/TR/WD-xsl">
I just follow this from an example of XML tutorial.
Please help, what is it that I miss? Seems everything
I have is okay....??
Thanks,
Ted.

Thanks you all!
You have spotted that mistyped.
However, turns out Internet Browser that I have does not permit the use of XSL. After I fixed the file, I got this
message:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Keyword xsl:apply-template may not be used here.
Oh well...
Anybody knows, if IE can or can not be used to view the
XML that reference XSL??
Thanks,
Ted.

Netgear WGR614v6 Problems with Ebay and others-Help!!

Just put in a Netgear WGR614v6 router and I can connect to the internet thru my 2-wire DSL modem (non-gateway1070-b).
First issue was that any email I sent out-bound from Mac Mail that had an attachment would just sit in my outbox, I then disabled the SPI firewall on the Netgear router and all worked fine.
The I went on to do further testing and found out that I can launch into ebay and ebay will only let me do one sign/in and or search then I will get a 'THE CONNECTION WAS RESET" page saying that "The connection to the server was reset while the page was loading."
Also when I access my SBC/Yahoo email thru the web, I can log onto my account and read my first or any one message, but then when I go to view a second the same thing happens as with ebay.
Anybody have any ideas as to what is going on.. is this a port 25 thing? All works fine when connected directly to the DSL modem.
Thanks in adavnace for any help you may have.
-the Danimal
G5 Mac OS X (10.4.7)

Figured it out, had to bridge by DSL modem and use the router as my DHCP server. All is working fine now.

Huge problems with 9360 - and NO help

I am attempting to make contact with someone who can assist me with a
problem I have been having with a handset (9360) that I got in December
2011 (on contract).
I have had to return the phone 3 times and now it is claimed that the phone
is beyond repair, while I still have to pay the contract - no replacement.
I have had almost NO use of this phone.
I will NEVER recommend this handset, and where before I had only good
things to say about Blackberry; I will NOT go through this THEFT again. I'd
rather use SAMSUNG or some other stupid phone. I am disgusted. Moreover
about the fact that I am unable to establish contact with someone that can
take responsibility for this horrible product. I tried phoning and texting
the rep from RIM, but he totally ignores me (I have his name and number
should someone wish to fire him)
But then maybe RIM knew their products are FAULTY and made sure that they
cannot be contacted for complaints.
BAD BAD BLACKBERRY and VERY BAD RIM.

It is possible that your PB was cut off in the middle of updating the OS. Try this;
- hold the + and the - levers/buttons AND the On/Off button on the top of your BP down. Yes, all three at the same time until the unit restarts.
This should reset the PB and go from there. One other thing. You can not be in a hurry to update the OS. It can take as long as 40 minutes. RIM is working on making OS updates faster. The latest OS version is 1.0.7.3312.
Good luck

Uh Oh... Major problem with iPad3 and BitmapData [HELP]

So.. I have some stageWebView elements that use BitMapData to capture a screenshot of the browser to allow for other elements to animate ontop of the browser ( sharing options, etc ).
When I capture this on the new iPad ... and add the bitmap to the stage the bitmap is zoomed in twice the size it should be. Its not capturing the true viewport. its zoomed in.
This is what I'm using to capture the bitmap.
     SocialbitmapData = new BitmapData(socialWebView.viewPort.width, socialWebView.viewPort.height);
     socialWebView.drawViewPortToBitmapData(SocialbitmapData);
     socialViewBitmap = new Bitmap(SocialbitmapData);
     addChild(socialViewBitmap);
Any help is appreciated

I'll try that
Just a note as well.   I wrote this solution ... works perfectly when tested from the IDE ..    copyPixels fails to display anything on iPad2 or iPad3
bitmapdataBrowser = new BitmapData(stage.stageWidth, stage.stageHeight);
               bitmapdataBrowser.draw(stage);
               bitmapDataA = new BitmapData(1024, 664);
               bitmapDataA.copyPixels(bitmapdataBrowser, new Rectangle(0, 42, 1024, 664), new Point(0, 0));
               var screenshot = new Bitmap(bitmapDataA);
               addChild(screenshot);
               screenshot.x = 0;
               screenshot.y = 42;

Problem about sales order stock stock transfer and batch determination

Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.

I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.

I've ordered a book from iPhoto 3 times. Last order was W29631918. It says the order is accepted and being processed and then about 4 days later tells me the order has been cancelled. If I call the help line it tells me the order has been cancelled and

CLICK. I've never had any problem like this with Shutterfly, ever. And Apple gives you no other explanation. CLICK. That was my last Apple order. What a waste. Maybe someone from Apple can tell my why they do this. It was for Christmas and I started ordering November 5 and waiting for it to be delivered each time. This last one I followed and it even told me that the order had been processed and could not be cancelled. The proprietary company. Now I'm sorry I started using iphoto. I'll redo the project with Shutterfly but I'm wondering if Apple treats many of its customers like this.

i had the same problem .. and the worse is that i am from middle east where we can not get any help from apple.
like if apple is only for some countries not for all world.
what happened then? have you ever know what was the problem?

My itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

my itunes id is blocked by apple because of an internal problem trying to update the itunes version, apple support is not helping at all and I need to update all my application. Is anybody you had this problem before? and how did they help? thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

TS1559 I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi settings grayed out or dim - Apple Support
I have this problem explained above, and the solution that is given on this website didn´t work for me. I need help...

iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Please help! Major problems (performance and lock-ups) with brand new W520 with Intel 520 SSD

My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
Once the machine arrived I had them do the following:
Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
Format both drives and put a preconfigured windows 7 64-bit image on the SSD
A general summary of the system is the following:
Intel i7-2860QM CPU
8GB RAM
NVIDIA Quadro 1000M
Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
Intel Advanced-N 6205 network adapter
TouchChip Fingerprint Scanner
The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
Event ID 10002 - WLAN Extensibility Module has stopped
Event ID 4001 - WLAN AutoConfig service has successfully stopped
Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
Score: 207 / 208 (s/b 314 / 327)
Overall Score: 533 (s/b 797)
One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
-Erik

Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Solid+State+Drives+and+Cach...)
Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that? I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

Problem with iTunes and iPhone Music organization. PLEASE READ AND HELP!

Hello All!
I have this problem concerning iTunes and my iPhone. When I add music, and I update the Artist title to organize it in my iPhone, It shows EDITED on my mac in iTunes, but not my iPhone. I took a screen shot of what It shows. The TOP is iTunes showing "Arie Dixon" and "Arie Dixon & Olivia Cipolla" two seperate CD's, yet different Artist Titles, just the way I want it. The BOTTOM shows how the file was originally, in 3 seperate titles, "Bebe Boohgz" "The Jackmove 3" and "Arie Dixon 'Bebe Boohgz' and Olivia Cipolla". The problem is that iTunes shows it in the correct title, but my iPhone won't. This is my 2nd iPhone 4 I have that has this problem. I'm not sure if it's the settings or encoding, can someone help me out? I can't be the only person with this problem. Apple rep looked at me like o_O
I also have music that won't appear in my iPhone, I manually have to search for, but appears on my iTunes in the correct title.
I also have everything updated, and have the new os x release.

kcinokc wrote:
I have a 3GS and the ios is 4.3.4. I am trying to load the latest version so I can then get the icloud.
So plug the device into the computer and upgrade.
Are you getting a specific error message when trying to do this?
As for the message about the media disappearing, of course it will. This is how iOS upgrades work. The device is wiped and the newest version of iOS for the device is installed as a "new" device then the device is restored using the backup created prior to the upgrade.
All the content on the device should already exist in iTunes on the computer.
If you want to move your iTunes library to a different drive for capacity reasons, do the following:
Close iTunes
Copy or Move the ENTIRE iTunes folder from the C drive to the other drive.
While holding SHIFT launch iTunes. iTunes will then prompt the user to select a library or create a new one. Point iTunes to the new iTunes folder location.

HT3702 I'm trying to update a game and its telling me I need to view my billing.i check my billing and it isn't giving me a none option. It's forcing me to put a credit card in, in order to update a game. Help please:(

I'm trying to update a game and its telling me I need to view my billing.i check my billing and it isn't giving me a none option. It's forcing me to put a credit card in, in order to update a game. Help please:(

Well, that is probably becasue you owe a debt or something similar.
Check with
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

Order Problems - No Broadband and No Help!

Similar Messages

Maybe you are looking for