Order type PM03 Not allowed in IW31 to create
Hello,
I need to stop creating in order type PM03 in IW31 since it is created in background job.
and i have another order type and assigned to roles so I am not able to use the role control for this.
is there any other user exit for this?
Shri
The following code in userExit IWO10009 (Include ZXWOCU07) , will not allow PM03 Orders created directly.
IF SY-TCODE = 'IW31' AND CAUFVD_IMP-AUART = 'PM03'.
MESSAGE: 'Direct Order Creation not allowed for PM03 Order type' TYPE 'E' DISPLAY LIKE 'I'.
ENDIF.
Note that this is prevented at the time of saving the Order. The error you get is
KJogeswaraRao
Similar Messages
-
Not able to include PM order type PM03 in integration model
Hi Experts,
I am creating PM order in R/3 with order type PM03. But while creating the integration model for maintaince order, PM03 is not populating. and others I am getting like PM01, PM02 etc...
Please advise if I need to do some setting for the same.
Thanks
HiteshHi,
Request you to cross check whether the PM03 order type has the below two check box active in IMG. 9 Tcode = OIOA
Open Item Management and Release Immediately.
PM03 order type with the above settings are getting reflected for me in my integration model. -
In Sales order plant is not allowing to change
Hi Guru's
In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
dnrHi friend,
I suppose you cannot change the plant at order level if the material is created to a particular plant.
As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
Regards -
Service/maintenance order type SM03 not completely maintained in plant 1000
Dear experts,
when I use T-code:iw31 create a service order,It show the following error message:
Service/maintenance order type SM03 not completely maintained in plant 1000
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Best regards,
LanceHello,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type SM03 against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
These both should be done, try to raise the SM03 order now.
PRase -
Service/Maintenace Order type ZMSO not completely maintained for plant SE50
Hi All,
Am trying to create a Service Order with T.Code IW31 and after entering the order type, priority, Llyods code, Plant and Bus.Area and press enter I got error " Service/Maintenace Order type ZMSO not completely maintained for plant SE50 "
Diagnosis:
For the selected order type and plant, no check control is maintained in
Plant Maintenance/Service in 'Availability Check for Materials, PRTs and
Capacities'.
Procedure
A check control must be maintained for this combination of order type
and plant.
Please suggest me what should I do in this case as my knowledge in CS is zero.
Awaiting your replies,
Thanks in advance,
Regards,
Anil.Hi Anilku,
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Assign order types to maintenance plants.
Maintain the order type ZMSO against the plant.
Go to SPRO --> Plant Maintenance & CS --> Maintenance and Service Processing --> Maintenance and Service Orders --> Completion confirmations --> Define the parameters for completion confirmations.
Thanks,
Swamy H P -
Manual reservation for order category 30 not allowed
Gurus,
I want to do manual reservation for order category.In MB21 when i try to do the reservation the system in giving the error message
Manual reservation for order category 30 not allowed
What should be done to overcome this.
In the order one component is given,i want to issue additional component,this is where i am encountering the problem.The Standard System would not allow you to create a reservation manually against a Maintenance Order Whether you change the Res / P Req Indicator to Never. Still the System would generate the Reservation for the Stock Materials. Purchase Requisition could be created manually against the Order but reservation is not. The Movement types used for reservations are 261/262. Kindly elaborate on the requirement, may be a work around is there.
If you want to skip the goods movement against reservation step, you should enable the back flushing indicator against the stock material in the General Data View so when you would be entering Confirmation against the order, the goods movement would be automatically posted against the reservation created automatically from the Order without you having to bother about the reservation.
Edited by: Usman Kahoot on May 31, 2010 1:50 PM -
WM movement type 255 not allowed for warehouse number 008
Hi,
Error message "WM movement type 255 not allowed for warehouse number 008" pops up during creation of outbound delivery. I checked the schedule line for this sales order, it was actually tagged to movement type 631 instead of 255. There ain't any movement type 255 at all. How to solve this?
Thanks.Hi,
Check in Customizing for Define Movement Types where for the given warehouse number movement type 255 is assigned.
Path is,
Logistics Execution - Activities - Transfers - Define Movement Types.
Check for 008 Movement 255 is assigned or not.
Thanks
Krishna. -
Service/maintenance order type SM01 not completely maintained in plant 1001
Dear All,
Am trying to configure Service Management where there is a scenario in which , when the user creates a Sales order for a installation item say TV or Fridge, automatically Service order has to be generated.
I have checked all the item Category Settings but am getting an error
Service/maintenance order type SM01 not completely maintained in plant 1001
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant.
Can anyone throw some light on this as i know you would have faced this problem.
SatishNothing
-
Manual reservation for order category 10 not allowed
why cant i make any manual reservations for a production order? is this possible or i can i configure the system to allow this?
>
R Brahmankar wrote:
> Dear,
>
> It is not possible.
>
> You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
>
> 10 PP production order
> 20 network
> 30 maintenance order
> 40 batch order (process manufacturing)
> 50 inspection lot
>
> When convert the planned order into production order, reservation will take place.
> This planned order is created by mrp run.
> Without running mrp, you are creating production order manually.So not possible to reserve.
>
> Order reservation will be created in issuing plant for components if u create production order manually.
>
> Plese check the "Plant"assigned in for the 2component in the "Component Overview" of the Prodution order.if it is 0002, order reservation will be created in at 0002 .
>
> Regards,
> R.Brahmankar
can this order category be configured? -
Manual reservation for order category 20 not allowed
Hi,
We are getting the error message "Manual reservation for order category 20 not allowed" when trying to manually create a Reservation Order charged to a network through transaction code MB21.
Anyone knows how to solve this?
Will appreciate feedback. Thanks!Hi,
You would need to add this component in your WBS element & then the MRP run will generate a reservation for this. You cannot create a manual reservation using 281 mvt in MB21.
Refer sap note 43924, read the paragrah under 'cause and prerequisites' means that according to SAP's standard design, reservation for Network is supposed to be automatic, not manual. However, if manual reservation is really needed, do apply the solution provided.
Hope the above clarifies.
Regards,
Vivek -
Order type is not picking while converison Plnd to process order
Dear Dudes,
i have maintained production scheduling profile in all material masters in which order type is specified. while converting planned order to process order order type is not picking.
thanks in advance.Robert,
Since you are using same order type for both MTS & MTO, you can define this order type "PI01" in the MRP plant parameters using transaction OPPQ in the Conversion of Planned order section.
I am not sure, why production scheduling profile is not working for you, hope you are using the Production scheduling profile configured using CORY transaction check this part alone.
Regards,
Prasobh -
ORA-04044: procedure, function, package, or type is not allowed here
Hi,
I am trying to build an object hierarchy.The object hirarcy is for a multi division, multi department, multi cost center and multi operation Organisation.Multiple department can store into multiple divisions, multiple cost center can store into multiple departments, multiple operations can store into multiple cost centers.
The structure I try to built like this:
create type div_obj_new as object
(id number,
divdesc varchar2(100)
create type div_obj_tab as
table of div_obj_new
create type dept_obj_new as object
(id number,
deptdesc varchar2(100),
dept_div number
create type dept_obj_tab as
table of dept_obj_new
create type cctr_obj_new as object
(id number,
cctrdesc varchar2(100),
cctr_dept number
create type cctr_obj_tab as
table of cctr_obj_new
create type oper_obj_new as object
(id number,
operdesc varchar2(100),
oper_cctr number
create type oper_obj_tab as
table of oper_obj_new
==========================
create type div_obj_type as object
(divid div_obj_tab)
NOT FINAL
create type dept_obj_type under div_obj_type
(deptid dept_obj_tab)
NOT FINAL
create type cctr_obj_type under dept_obj_type
(cctrid cctr_obj_tab)
NOT FINAL
create type oper_obj_type under cctr_obj_type
(operid oper_obj_tab)
NOT FINAL
=======This Table creation is not working=================
create table organisation
(div div_obj_type,
dept dept_obj_type,
cctr cctr_obj_type,
oper oper_obj_type)
nested table div store as division_table
nested table dept store as department_table
nested table cctr store as costcntr_table
nested table oper store as operation_table
nested table oper store as operation_table
ERROR at line 9:
ORA-22912: specified column or attribute is not a nested table type
=========================================================
Then I try to insert record into the div_obj_type instead of organisation table as it was not working.
The insert script is as follows:
===================================
insert into div_obj_type values
div_obj_tab
(div_obj_new(01,'Division 01'),
div_obj_new(02,'Division 02'),
div_obj_new(03,'Division 03'),
div_obj_new(04,'Division 04')
dept_obj_tab
dept_obj_new(10,'Department 10',1),
dept_obj_new(11,'Department 11',1),
dept_obj_new(12,'Department 12',2),
dept_obj_new(13,'Department 13',3),
dept_obj_new(14,'Department 14',4),
dept_obj_new(15,'Department 15',5),
dept_obj_new(16,'Department 16',6),
dept_obj_new(17,'Department 17',7)
cctr_obj_tab
cctr_obj_new(100,'Cost Center 100',10),
cctr_obj_new(101,'Cost Center 101',11),
cctr_obj_new(100,'Cost Center 102',12),
cctr_obj_new(100,'Cost Center 103',13),
cctr_obj_new(100,'Cost Center 104',14),
cctr_obj_new(100,'Cost Center 105',15),
cctr_obj_new(100,'Cost Center 106',16),
cctr_obj_new(100,'Cost Center 107',17),
cctr_obj_new(100,'Cost Center 108',10),
cctr_obj_new(100,'Cost Center 109',11),
cctr_obj_new(100,'Cost Center 110',12)
oper_obj_tab
oper_obj_new(1000,'Operation 1000',100),
oper_obj_new(1000,'Operation 1001',101),
oper_obj_new(1000,'Operation 1002',102),
oper_obj_new(1000,'Operation 1003',103),
oper_obj_new(1000,'Operation 1004',104),
oper_obj_new(1000,'Operation 1005',105),
oper_obj_new(1000,'Operation 1006',106),
oper_obj_new(1000,'Operation 1007',107),
oper_obj_new(1000,'Operation 1008',108),
oper_obj_new(1000,'Operation 1009',109),
oper_obj_new(1000,'Operation 1010',110),
oper_obj_new(1000,'Operation 1011',101),
oper_obj_new(1000,'Operation 1012',102),
oper_obj_new(1000,'Operation 1013',103),
oper_obj_new(1000,'Operation 1014',104),
oper_obj_new(1000,'Operation 1015',105),
oper_obj_new(1000,'Operation 1016',106),
oper_obj_new(1000,'Operation 1017',107),
oper_obj_new(1000,'Operation 1018',108)
insert into div_obj_type values
ERROR at line 1:
ORA-04044: procedure, function, package, or type is not allowed here
Actually I want to create an object view or object table with all the details of division, department , cost center and operation and it will store depending upon the respective upper level hirarcy 's id.For eg. department details can be fetched through division id etc..
So I can't figure out what to do for this kind of structure and how to do that.
I am running Oracle Release 2 (9.2.0.1.0) for Windows 2000.
Any help , advice or suggestions will be appreciated.
Thanks & Regards
NiharHi Cameron,
Thanks for your great suggestion.Actually what you have suggested is correct and it was tested by me correctly.But actually I want to store records in the multiple objects hirarcy depending upon the respective upper level hirarcy 's id.For say how can I retrive all records related to divisionID which is in the top level hirarchy? So by selecting divisionID=01, how can I easily select all depts,cost centers and Operation details?
Again I have another problem , when try to retrive record using PL/SQL I got some problem.
Structure as created above.Again I am giving here.
create type div_obj_new as object
(id number,
divdesc varchar2(100)
create type div_obj_tab as
table of div_obj_new
create type dept_obj_new as object
(id number,
deptdesc varchar2(100),
dept_div number
create type dept_obj_tab as
table of dept_obj_new
create type cctr_obj_new as object
(id number,
cctrdesc varchar2(100),
cctr_dept number
create type cctr_obj_tab as
table of cctr_obj_new
create type oper_obj_new as object
(id number,
operdesc varchar2(100),
oper_cctr number
create type oper_obj_tab as
table of oper_obj_new
create table organisation
(div div_obj_tab,
dept dept_obj_tab,
cctr cctr_obj_tab,
oper oper_obj_tab)
nested table div store as division_table
nested table dept store as department_table
nested table cctr store as costcntr_table
nested table oper store as operation_table
insert into organisation values
div_obj_tab
(div_obj_new(01,'Division 01'),
div_obj_new(02,'Division 02'),
div_obj_new(03,'Division 03'),
div_obj_new(04,'Division 04')
dept_obj_tab
dept_obj_new(10,'Department 10',1),
dept_obj_new(11,'Department 11',1),
dept_obj_new(12,'Department 12',2),
dept_obj_new(13,'Department 13',3),
dept_obj_new(14,'Department 14',4),
dept_obj_new(15,'Department 15',5),
dept_obj_new(16,'Department 16',6),
dept_obj_new(17,'Department 17',7)
cctr_obj_tab
cctr_obj_new(100,'Cost Center 100',10),
cctr_obj_new(101,'Cost Center 101',11),
cctr_obj_new(100,'Cost Center 102',12),
cctr_obj_new(100,'Cost Center 103',13),
cctr_obj_new(100,'Cost Center 104',14),
cctr_obj_new(100,'Cost Center 105',15),
cctr_obj_new(100,'Cost Center 106',16),
cctr_obj_new(100,'Cost Center 107',17),
cctr_obj_new(100,'Cost Center 108',10),
cctr_obj_new(100,'Cost Center 109',11),
cctr_obj_new(100,'Cost Center 110',12)
oper_obj_tab
oper_obj_new(1000,'Operation 1000',100),
oper_obj_new(1000,'Operation 1001',101),
oper_obj_new(1000,'Operation 1002',102),
oper_obj_new(1000,'Operation 1003',103),
oper_obj_new(1000,'Operation 1004',104),
oper_obj_new(1000,'Operation 1005',105),
oper_obj_new(1000,'Operation 1006',106),
oper_obj_new(1000,'Operation 1007',107),
oper_obj_new(1000,'Operation 1008',108),
oper_obj_new(1000,'Operation 1009',109),
oper_obj_new(1000,'Operation 1010',110),
oper_obj_new(1000,'Operation 1011',101),
oper_obj_new(1000,'Operation 1012',102),
oper_obj_new(1000,'Operation 1013',103),
oper_obj_new(1000,'Operation 1014',104),
oper_obj_new(1000,'Operation 1015',105),
oper_obj_new(1000,'Operation 1016',106),
oper_obj_new(1000,'Operation 1017',107),
oper_obj_new(1000,'Operation 1018',108)
===============
declare
div number;
divdesc varchar2(100);
divdetails varchar2(100);
dept number;
deptdesc varchar2(100);
deptdetails varchar2(100);
cctr number;
cctrdesc varchar2(100);
cctrdetails varchar2(100);
oper number;
operdesc varchar2(100);
operdetails varchar2(100);
cursor c_div is
select d.id , d.divdesc from table(select div from organisation) d
where d.id=1;
--union
cursor c_dept is
select dp.id , dp.deptdesc "Dept Details" from table(select dept from organisation) dp
where dp.dept_div=1;
--union
cursor c_cctr is
select cc.id , cc.cctrdesc "Cctr Details" from table(select cctr from organisation ) cc
where cc.cctr_dept=10;
--union
cursor c_oper is
select op.id , op.operdesc "Oper Details" from table(select oper from organisation) op
where op.oper_cctr=100;
TYPE oper_type IS RECORD
(oper_no NUMBER,
oper_desc VARCHAR(50));
TYPE cctr_type IS RECORD
(cctr_no NUMBER,
cctr_desc VARCHAR(50),
oper_detl oper_type);
TYPE dept_type IS RECORD
(dept_no NUMBER,
dept_desc VARCHAR(50),
cctr_detl cctr_type);
TYPE div_type IS RECORD
(div_no NUMBER,
div_desc VARCHAR2(50),
dept_detl dept_type);
division_rec div_type;
begin
for i_div in c_div%rowcount
loop
exit when c_div%notfound;
division_rec.div_no:=i_div.id;
division_rec.div_desc:=i_div.divdesc;
dbms_output.put_line('Division details = ' || division_rec.div_no || division_rec.div_desc);
--end loop;
for i_dept in c_dept%rowcount
loop
exit when c_dept%notfound;
select dp.id , dp.deptdesc ,
into
division_rec.dept_detl.dept_no, division_rec.dept_detl.dept_desc
from
table(select dept from organisation) dp
where dp.dept_div=division_rec.div_no;
-- division_rec.dept_detl.dept_no:=c_dept.id;
-- division_rec.dept_detl.dept_desc:=c_dept.deptdesc;
dbms_output.put_line('Department details = ' || division_rec.dept_detl.dept_no ||
division_rec.dept_detl.dept_desc);
--end loop;
for i_cctr in c_cctr
loop
exit when c_cctr%notfound;
select cc.id , cc.cctrdesc
into
division_rec.dept_detl.cctr_detl.cctr_no ,
division_rec.dept==_detl.cctr_detl.cctr_desc
from
table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;
-- division_rec.dept_detl.cctr_detl.cctr_no:=c_cctr.id;
-- division_rec.dept_detl.cctr_detl.cctr_desc:=c_cctr.cctrdesc;
dbms_output.put_line('Cost Center details = ' || division_rec.dept_detl.cctr_detl.cctr_no ||
division_rec.dept_detl.cctr_detl.cctr_desc);
--end loop;
for i_oper in c_oper%rowcount
loop
exit when c_oper%notfound;
select op.id , op.operdesc
into
division_rec.dept_detl.cctr_detl.oper_detl.oper_no,
division_rec.dept_detl.cctr_detl.oper_detal.oper_desc
from
table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_no:=c_oper.id;
-- division_rec.dept_detl.cctr_detl.oper_detal.oper_desc:=c_oper.operdesc;
dbms_output.put_line('Operation details = ' ||
division_rec.dept_detl.cctr_detl.oper_detl.oper_no ||
division_rec.dept_detl.cctr_detl.oper_detal.oper_desc);
end loop;
end loop;
end loop;
end loop;
end;
for i_div in c_div%rowcount
ERROR at line 46:
ORA-06550: line 46, column 14:
PLS-00999: implementation restriction (may be temporary)
ORA-06550: line 46, column 1:
PL/SQL: Statement ignored
New version of PL/SQL bloc
==============================
declare
div number;
divdesc varchar2(100);
divdetails varchar2(100);
dept number;
deptdesc varchar2(100);
deptdetails varchar2(100);
cctr number;
cctrdesc varchar2(100);
cctrdetails varchar2(100);
oper number;
operdesc varchar2(100);
operdetails varchar2(100);
cnt_div number;
cnt_dept number;
cnt_cctr number;
cnt_oper number;
cursor c_div is
select d.id , d.divdesc from table(select div from organisation) d
where d.id=1;
--union
cursor c_dept is
select dp.id , dp.deptdesc from table(select dept from organisation) dp
where dp.dept_div=1;
--union
cursor c_cctr is
select cc.id , cc.cctrdesc from table(select cctr from organisation ) cc
where cc.cctr_dept=10;
--union
cursor c_oper is
select op.id , op.operdesc from table(select oper from organisation) op
where op.oper_cctr=100;
TYPE oper_type IS RECORD
(oper_no NUMBER,
oper_desc VARCHAR(50));
TYPE cctr_type IS RECORD
(cctr_no NUMBER,
cctr_desc VARCHAR(50),
oper_detl oper_type);
TYPE dept_type IS RECORD
(dept_no NUMBER,
dept_desc VARCHAR(50),
cctr_detl cctr_type);
TYPE div_type IS RECORD
(div_no NUMBER,
div_desc VARCHAR2(50),
dept_detl dept_type);
division_rec div_type;
begin
/*select count(*) into cnt_div from table(select div from organisation) d
where d.id=1;*/
for i_div in c_div
loop
exit when c_div%notfound;
division_rec.div_no:=i_div.id;
division_rec.div_desc:=i_div.divdesc;
dbms_output.put_line('Division details = ' || division_rec.div_no || division_rec.div_desc);
--end loop;
/*select count(*) into cnt_dept from table(select dept from organisation) dp
where dp.dept_div=i_div.id;*/
for i_dept in c_dept
loop
exit when c_dept%notfound;
select dp.id , dp.deptdesc
into
division_rec.dept_detl.dept_no, division_rec.dept_detl.dept_desc
from
table(select dept from organisation) dp
where dp.dept_div=division_rec.div_no;
-- division_rec.dept_detl.dept_no:=c_dept.id;
-- division_rec.dept_detl.dept_desc:=c_dept.deptdesc;
dbms_output.put_line('Department details = ' || division_rec.dept_detl.dept_no || division_rec.dept_detl.dept_desc);
--end loop;
/*select count(*) into cnt_cctr from table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;*/
for i_cctr in c_cctr
loop
exit when c_cctr%notfound;
select cc.id , cc.cctrdesc
into
division_rec.dept_detl.cctr_detl.cctr_no , division_rec.dept_detl.cctr_detl.cctr_desc
from
table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;
-- division_rec.dept_detl.cctr_detl.cctr_no:=c_cctr.id;
-- division_rec.dept_detl.cctr_detl.cctr_desc:=c_cctr.cctrdesc;
dbms_output.put_line('Cost Center details = ' || division_rec.dept_detl.cctr_detl.cctr_no || division_rec.dept_detl.cctr_detl.cctr_desc);
--end loop;
/*select count(*) into c_oper from table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;*/
for i_oper in c_oper
loop
exit when c_oper%notfound;
select op.id , op.operdesc
into
division_rec.dept_detl.cctr_detl.oper_detl.oper_no, division_rec.dept_detl.cctr_detl.oper_detl.oper_desc
from
table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_no:=c_oper.id;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_desc:=c_oper.operdesc;
dbms_output.put_line('Operation details = ' || division_rec.dept_detl.cctr_detl.oper_detl.oper_no || division_rec.dept_detl.cctr_detl.oper_detl.oper_desc);
end loop;
end loop;
end loop;
end loop;
end;
declare
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 64
I hope you might have the solutions.
Thanks & Regards
Nihar -
Activity type E not allowed for equipment entered
Dear Sir , We are using ETM . Following error is coming while creating performace based document .
Activity type E not allowed for equipment entered
Regards
AnilGive 1 for both type and give it a try.
for target=actual which is type 5 pls check the link below
http://help.sap.com/saphelp_46c/helpdata/EN/66/bc6faa43c211d182b30000e829fbfe/content.htm -
Order types, why do we need to create our order types and not use the stand
HI
Order types, why do we need to create our order types and not use the standard ones during implementation.Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi -
Error in RFx : Item type 'Service' not allowed for this Item
hi , experts,
We use SRM7.0 in Standalone scenario .
i get an error when i transfer SC to RFx : Line 0001: Item type 'Service' not allowed for this Item .
if someone kindly tell me how to correct this Error.
another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
reagrds
claudHi Claud,
SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
Thanks and regards,
Ranjan
Maybe you are looking for
-
Can't create hyperlinks after converting a Word document with Acrobat XI Pro
Hello, Here's my problem. I'm making a catalog document for my company. The document that I'm converting to PDF is made on Office Word 2013 and it's a .docx format file. I'm on Windows 8 and the latest version of Adobe Acrobat XI Pro installed. Insid
-
Error when modifying global services plan
I'm trying to modify the global services part of my wireless plan. When I try submitting this change, I get the error message "You currently are on the selected plan. Please select another plan." Is this a bug with the site or is there some other w
-
Converting CMYK colors to spot color?
My publisher/printer requests a "hi-res pdf" as camera ready copy for a book I'm writing which will be printed in 2 colors (black and a spot color shade of blue). The pages have images from various sources and text with CMYK approximations of that b
-
Using for-each for input into a database adapter
As input to a Web service I have an XSD that has parent elements and two unbounded child elements. I want to use XSLT to loop through the child elements to include them as comma separated strings for use in an IN clause in the query of the database a
-
K900 UPDATE FAIL, HELP PLEASE
I am trying to update my k900 (rooted i think). The instalation seems to go ok but after the restart it says 'Installation failed, failed to install ota package'. Any help would be massively appreciated Thanks Matt.