Ordinal 215 could not be located in dynamic link library VISA32.dll

I posted this in the hardware forums, but haven't got a respond yet, so I'm trying it here.
I'm trying to recompile code that was developed
in LabView 6.0 to LabView8.2. When I attempt to run the code, I get
the following error message:
"The ordinal 215 could not be located in the dynamic link library VISA32.dll".
This error seems to pop up whenever I make a call to the any of
the VXI vi. Currently, we have NI-VXI 3.3.1 and VISA 4.0 installed,
and we have a MXI-2 PCI card installed in the PC. The precompiled
version of the LabVIEW 6.0 code works on the same PC.
Thanks in advance

What version of the visa32.dll do you have including the sub version?
Routines in Dll's are usually referenced either by ordinal position or routine name. This error is implying that
the routine that was located at ordinal 215 at one time, is not available in the visa32.dll you are using right now at the same ordinal position.
I looked in my visa32.dll and in my ordinal position 215, I have a routine called, viAssertIntrSignal which would imply some sort of error condition handler.
My visa32.dll version is 4.0.0.49152. I was curious what sub version you are running since you said you are running v4.0.

Similar Messages

Ordinal 459 could not be located in dynamic link library.urlmon.dll What the heck is this and how do I fix it?

I get the following message:the ordinal 459 could not be located in the dynamic link library. urlmon.dll. I get this when requesting list links within a genealogy program (not on the internet) Haven't noticed it on anything else yet because I have been obsessing over just that one program. At the same time I notice that my windows sidebar is not visible. Have not changed any settings. Java was disabled due to the recent exploitation. Would that have something to do with it. Or perhaps Firefox18 installed and then it went bad? Thanks in advance for any help. Running Vista.

If this issue is caused after you have applied MS13-008 which is a security update then I would think that this is a Firefox issue and that something changed and they have to find a new way to do what they where doing before the update.
However since the error message states it can't find the file urlmon.dll has anyone checked on why this file is missing or why it is not registered? Since URLMON.DLL is not updated by MS13-008 I would suspect this could be a coincidence.
Here is a related Microsoft KB article about that dll causing similar issues with IE and how to address it.
http://support.microsoft.com/kb/281679
I mean a quick google of that exact error message "The ordinal 459 could not be located in the dynamic link library urlmon.dll" has results of this problem going back to at least 2011 long before MS13-008 was released. There are a number of solutions as well for different situations posted.
It may be worth checking some of those is the Microsoft KB above doesn't help.
And yet I am left thinking that Tyler's statement from January 16 about it being reported by other uses and apparently being caused by malware is the most likely reason for this issue. He does know Firefox rather well, and he is an employee of Mozilla. So I really would start with his suggestions of checking out their KB's he listed:
https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware
https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

What does this message mean on my PC " the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll.

Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

Tried to update iTunes, after downloading I get the message: procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ??

Tried to update iTunes. After downloading I get this message: Procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ?? What does that mean?!

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

The procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll

hy to all of you. The procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll" but a read the solution in the forum, but i can't find SQlite3.dll in the indicated folder also from search alll program and files in the start . thanks a lot anway for your help

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

The procedure entry point NS_Set DLL Directory could not be located in dynamic link library Xul.dll. Firefox 4 downloaded and used yesterday won't start today. Any answers?

I downloaded Firefox 4 yesterday. I used it and had no problems. I started my computer today and clicked the Firefox icon and got the message "The procedure entry point NS_Set DLL Directory could not be located in dynamic link library Xul.dll" .I tried to shutdown and restart and got the same message.I use Norton Security. Could it not recognize Firefox 4 and done this?

'''Edit: '''That was a lot of questions. You might want to just re-run the Firefox 5.0.1 installer to see whether that corrects what appears to be a mismatch of files. I suggest saving the installer to the desktop, restarting Windows to ensure that all file locks are released, and then running the installer. As always, you can download from here: http://www.mozilla.com/firefox/all.html
In your other post, you wrote "I just downloaded FireFox 5.0 today, and none of the icons on my desktop will open. This is the message that I receive. The procedure entry point NS_Set DLL Directory could not be located in dynamic link library Xul.dll."
Can you describe what happens in these different scenarios:
(1) Start Firefox with its own program icon. Error dialog, but Firefox runs normally after you dismiss it? Or no error? Or Firefox won't start?
(2) Firefox not running, double-click shortcut to web site on desktop. Error dialog but Firefox loads the page after you dismiss it? Or Firefox doesn't load the page? Or Firefox never loads??
(3) Firefox running, double-click shortcut to web site on desktop. Error dialog but Firefox loads the page after you dismiss it? Or Firefox doesn't load the page? Or Firefox dies??
(4) Double-click unrelated desktop shortcut. Does this give an error as well?
If you've noticed effects with links in documents or emails outside of Firefox, that could be a clue as well.

The procedure entry point EncodePointer could not be located in dynamic link library KERNEL32.dll

Every time I open a program to update to service pack 1 I get the following message. (The procedure entry point EncodePointer could not be located in dynamic link library KERNEL32.dll)
Any sugestions?

I cannot download microsoft security essentials onto my computer because I received this error message, "he procedure entry point EncodePointer could not be located in the dynamic link library KERNEL32.dll." Can you help me correct this problem?
Hi Nick1943,
Welcome to MSDN forum.
Please check the workarounds in the following links to fix this issue:
The
Procedure entry point EncodePointer could not be located in the dynamic link library KERNAL32.dll
ErrMsg: Procedure Entry Point Could Not Be Located
Targeting Windows XP with C++ in Visual Studio 2012
By the way,this forum is mainly to discuss and ask questions about
Visual Studio Extensibility (VSX), using the Extension Manager, building VSIX containers for deployment, the Visual Studio SDK, Text Templates (T4), add-ins, macros, and more.
I will move this peoblem to Off Topic.
Thanks for your understanding.
Best Regards,
Jane.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The procedure entry point sqlite3_open_v2 could not be located in dynamic link library SQLite3.dll

This pop up on my screen
The Procedure entry point sqlite3_open_v2 could not be located in the dynamic libary SQLite3.dll
I cant figure a fix to rid me of this issue

That's a Windows error message and it has nothing to do with OS X.

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

What does the message could not locate the dynamic link library SQlite.dll

Every time I restart my computer I get the message from AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. What does this mean and how can I elimanate it?

Try using one of the following Apple documents to completely remove iTunes and the related components (especially the stuff mentioned in the common files folder).
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If that doesn't work, try the suggestion in this thread -> AppleSyncNotifier.exe - Entry Point Not Found

Failure to configure windows updates. Reverting changes.....ordinal 282 could not be located in the dynamic link library

Hi,
My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates. From then on I could log in to my system but it keeps popping up some error messages like....
tpsdsvc.exe-ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
concentr.exe--ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
AdobeARM.exe----ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
.Net EventWindow...MFManager.exe----ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
SLRuntime.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
IDVault.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
when I try to open IE browser..it pops up ieexplorer.exe------ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
My chrome browser stopped working...it opens but when I type any url...it just stays inactive...nothing happens
Even I'm unable to uninstall chrome through control panel. Nothing happens. I'm writing this through mozilla firefox. And even i cant update this browser. It says firefoxInstalle.exe---ordinal not found.
It always gives install update notification but when i try to install updates...it says failure to configure windows updates. reverting changes...
so far i tried sfc /scannow, restore points, safe mode, iertutil.dll file exists in c:/windows/system32...etc,.
I appreciate any solution on how to fix this problem and what is causing it?

Hi sravy,
Would you please let me know whether refer to Susan’s suggestion and check if it may be a hardware/harddrive
issue? Any find?
à
My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates.
Did you find any dump file after the Windows 7 crashed? If find dump file, please refer to following KB and
check if can help you to analyze the dump file.
How to read the small memory dump file that is created by
Windows if a crash occurs
In addition, as Susan said, this forum is for Small Business Server. Based on your description, your problem
was just occurred in Windows 7 OS. I suggest that you would post your question in
Windows 7 Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu

Getting error: "The ordinal 449179364 could not be located in the dynamic link library WINMM.dll"

So when I start rendering a video, I get the message:
"The ordinal 449179364 could not be located in the dynamic link library WINMM.dll."
This is followed by a "transcoder error" message, and then an application crash. I looked for WINMM.dll, and found it here:
C:\Windows\winsxs\x86_microsoft-windows-audio-mmecore-base_31bf3856ad364e35_6.1.7600.16385 _none_b5b6125db303b0f8
Has anyone encountered this before, or found a solution?
Many thanks.

When sharing burn the project to a Folder rather than Disk. Does this complete? If so use something like ImgBurn to write your DVD from that folder.
What brand of disk are you using (ImgBurn can tell you)?
You seem to have covered many of the basics, but here is my usual list (I don't recall seeing you mention your graphic/sound drivers). It will be handy to see the Gspot analysis.
Some basics:
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.7 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus realtime scanning.
Use the GSpot Codec Information Utility to analyse the file and post screen image.
Post back here with the necessary information described here: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

The ordinal 282 could not be located in the dynamic link lirary IERTUTIL.DLL

Hi all
I've installed the latest Updates on my SBS 2011 machine yesterday.
And now I get the "The ordinal 282 could not be located in the dynamic link library IERTUTIL.DLL" error when I try to start the IE.
Any idea?
Best regards, Chris

Hi Chris,
Would you please let me know the version information of IE? Did you install any update for the IE? Please navigate
to C:\Windows\System32 and check if IERTUTIL.DLL file exists?
On current situation, please run
sfc /scannow command to scan all protected system files. Any find?
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

The ordinal 303 could not be located in the dynamic link library iertutil.dll

As discussed in
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/getting-error-using-rdc-the-ordinal-303-could-not/86d4479e-3152-4052-a959-1f86fe608774we are experiencing an issue with patch 2956283. After rebooting, our users can no longer
use IE and receive the error "The ordinal 303 could not be located in the dynamic link library iertutil.dll". I have seen this on several machines and it may involve Lync. The title of the error is "Microsoft Lync: communicator.exe
- Ordinal Not Fount". After removing 2956283 everything starts working again. Any fix for this? It appears to be pretty wide spread based on the posts in the previously mentioned forum.

Hi Frank,
Why did you install that package for your system? Did you encounter the issue in the article below?
Internet Explorer 11 crashes when you turn on or turn off Enterprise Mode in the Tools menu
http://support.microsoft.com/kb/2956283
If no, please uninstall it.
If yes, check the following settings:
1. Press WIN+R to open the Run window, type
SystemPropertiesAdvanced and press Enter.
2. Click the environment variables... button.
3. Find the path variable and check if c:\windows\system32 (or
%SystemRoot%\system32) is present between all the paths.
If not, add it at the end of the entire string (preceded by a semi colon) and click Always ok.
4. Check if you have got IERTUTIL.DLL in c:\windows\system32.
Karen Hu
TechNet Community Support

The ordinal 139 could not be located in the dynamic link library iertutil.dll

I am getting this error while launching IE on my computer:
The ordinal 139 could not be located in the dynamic link library iertutil.dll
I have IE 11 installed on windows7 32 bit.

Hi Bansal,
When does this error start to occur? Check Event Viewer and see if we could find any other messages.
Take a try with the SFC command:
Use the System File Checker tool to repair missing or corrupted system files
Further, try the following if SFC won't help:
How to repair or reinstall Internet Explorer in Windows
Best regards
Michael Shao
TechNet Community Support

Ordinal 215 could not be located in dynamic link library VISA32.dll

Similar Messages

Maybe you are looking for