Ordinal 2616 missing

I tried on WEC2013 to execute the TUX-test for the file System Performance tests for the SDHC Card:
https://msdn.microsoft.com/en-us/library/gg154487.aspx
When executing a test I get always the following error:
ERROR: function @ Ordinal 2616 missing
!!! Please Check your SYSGEN variable !!!
From the coredll.def file I see that this is the following function and SYSGEN:
; @CESYSGEN IF COREDLL_REGEXT
    ;; Registry Extensions
    RegistryGetDWORD              @2615
    RegistryGetString             @2616
    RegistrySetDWORD              @2617
    RegistrySetString             @2618
    RegistryTestExchangeDWORD     @2619
    RegistryNotifyApp             @2620
    RegistryNotifyWindow          @2621
    RegistryNotifyMsgQueue        @2622
    RegistryNotifyCallback        @2623
    RegistryCloseNotification     @2624
    RegistryStopNotification      @2625
    RegistryBatchNotification     @2626
    RegistryDeleteValue           @2627
; @CESYSGEN ENDIF
My question is now, which SYSGEN do I have to set, so that this functions where included in the coredll.dll? I found no sysgen in my catalog items view, which matches this sysgen.
Thanks.
Markus

I proposed this as an answer because while it doesn't directly tell you what to do for ordinal 2616, it does point out that there is a great article that Steve and Mike wrote more than 10 years ago that is still very relevant today.
The article walks the reader through figuring out which ordinal is missing, and how to add it.
Come to think about it, I wrote something about this myself, see
http://geekswithblogs.net/BruceEitman/archive/2009/03/23/windows-ce-error-function--ordinal-342-missing.aspx
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

Similar Messages

  • Error Message upon loading XP

    Hi Mark, I have a problem with my thinkpad.  upon loading xp i get an error message ORDINAL 522 MISSING FROM LIBRARY. I don't have any icons on my desktop and my control panel and start menu is also missing.  I backed up my laptop as i had a virus and i think i went back too far. i don't have an xp disc but it is genuine as it was already loaded on my laptop. BIOS, i have forgotten my password and am scared to keep trying it just in case it locks.. please help me.  how do i re-load everything on my laptop so that it will run normally on xp. Also when it does load on to xp everything is very big. many thanks
    Moderator note:  The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules. 
    Message Edited by Agotthelf on 29-05-2009 09:42 AM

    Hello Hanz,
    Please tell us your type, model number, not S/N, please.
    That will help us to help you. 
    Regarding bios password:
    I'm very sorry, but you will need to remember that password, because this subject is not allowed, to be discussed here as stated in the forum rules 
    "No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics." 
    Message Edited by Agotthelf on 29-05-2009 09:49 AM
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Request the help, I have the adobe the original software, but the ordinal number is missing, there is way checking before recording or begging the solution

    請求幫助，我有adobe正版軟體，但是序號不見了，有辦法查到之前的紀錄或求解決辦法嗎?
    Request the help, I have the adobe the original software (Adobe Creative Suite 6 Design & Web Premium), but the ordinal number is missing, there is way checking before recording or begging the solution
    Does anyone know how can I do? Please help,thank you very much.

    Hi there,
    I'm not sure that I understand. Are you trying to find the order number or serial number for your Adobe software? If so, please see Find your serial number quickly - Adobe.
    Best,
    Sara

  • RE: Trade-In System repeatedly down for over a week, causing me to miss sale.

    To Whom It May Concern,
    I wanted to express my frustration with the difficulties I’ve had with the Video Game Trade-In service at store locations #266 and #274. Last week, there was a sale where you could trade in used video games for an extra 50% store credit. I had several Playstation 4 games that I had wanted to exchange (Madden 15, Last of Us: Remastered, Knack, Infamous: Second Son, and Fifa 14) to take advantage of this opportunity.
    The first time I tried to exchange these games at store #266 last week, I was informed that the trade in system was down and that I should try again tomorrow. The next day I tried again and I was informed that, yet again, the system was down. Two days later, I tried again at the same store and was told the system was STILL down. After this I immediately headed to store #274 to try to turn in my games and was informed that the system was down there as well.
    Today (almost a week after my last attempt to exchange these games), I tried to turn in my games yet again to at least get some store credit but, after waiting in line for half an hour, I was informed that the trade-in system was down again.
    Fed up, I went down the street and exchanged my games at the local Target and picked up a new game there. I didn’t get the best deal, but I was able to accomplish my transaction without a hitch.
    I understand that technology can be unreliable and systems can crash, however, I feel that 5 separate attempts at 2 different stores over the course of more than a week (causing me to completely miss the promotion) begins to get a but ridiculous. The staff, while all very courteous, told me that there was no work-around or anything that they could do. I think it would be wise for there to be some sort of fail-safe system in place if such. I would have even loved a simple deduction of the trade-in value of my games off of my immediate new purchases, for instance. However each time they told me this couldn’t be done. As a result, I took my business elsewhere.
    I just wanted to express my frustration and disappointment with Best Buy and their trade-in system, which unfortunately caused me to miss out on a very good promotion, and caused Best Buy to miss out on my business. I hope that the trade-in system is updated and it’s obviously problems are addressed so that other customers won’t have to go through the frustrations I have.
    Thank you for your time.
    -Kevin D.

    Hello Kevin-
    Having worked in the gaming industry for another company that does trade-in’s on games (but will remain nameless), I really love that Best Buy is able to offer some great amounts and promotions for trading in games.  Obviously, that doesn’t mean much to you if you are not able to participate because of system issues.
    I apologize that these system issue meant that you ended up missing out on the 50% trade-in bonus.  In some situations, stores were able to utilize a different register to process this, but for some, they simply had to wait until it was fixed.  Because we have to follow many state, county and city ordinances to provide this service, we generally cannot provide a work around when systems fail.
    I am able to report that we believe we have corrected the issue and that our stores should be able to trade-in again.  However, I would recommend calling the store first to make sure that they are up and running if you have a distance to travel to the store.
    Thanks for letting us know your situation.
    Bill|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Ordinal 55 could not be found in the dynaminc link library iertutil.dll cs5.5 installation problem.

    Okay, so when i downloaded the trial version of Flash Professional CS5.5, the following popup "popped up".
    "The dynamic link library iertutil.dll could not be found. Reinstalling the application may solve this problem."
    So i went to a site that had helped me with this sort of thing before dll-files.com, and downloaded iertutil.dll, and placed it in my System32 folder.
    I pressed OK on the previous pop-up, only to be greeted with:
    "Ordinal 55 could not be found in the dynaminc link library iertutil.dll"
    Flash CS5.5 finished installing and works great, but the same Ordinal 55 popup pops up at least a hundred times a day, (It's even popping up as I write this) even when Flash isn't open
    I'm using Windows XP SP2, I have Internet Explorer 6 SP2 (though i usually use Google Chrome Instead)
    Thanks in advance...

    Hi Bansal,
    When does this error start to occur? Check Event Viewer and see if we could find any other messages.
    Take a try with the SFC command:
    Use the System File Checker tool to repair missing or corrupted system files
    Further, try the following if SFC won't help:
    How to repair or reinstall Internet Explorer in Windows
    Best regards
    Michael Shao
    TechNet Community Support

  • Invoice on block due to missing tax statement

    Hi
    I have one issue
    There is a debit memo and credit memo and not being released to accounting.  SAP error says Tax statement item missing for tax code OC.  I have checked with our Master Co-ordinator and Finance team and both the tax status anc composite costs have been entered so we're not sure why its not releasing.  The debit memo # is 50963828 and credit memo # is 1073684940.
    Regards
    Sree

    Hi,
    Please check OSS Note 112609 and 400766.
    The FF805 error is most likely triggered due to configuration in the pricing procedure.
    If an active tax condition record is found (for example on UTXJ), even though it is statistical, the tax code (linked to the record) is then distributed to the active price conditions for that item pricing.
    When it passes to FI, the active tax condition is passed but not the price because an active price condition cannot be found.
    In the SD-FI interface, for every price condition sent over, there MUST be a tax condition sent over, hence the FF805.
    This might be in your case.
    Please set the reference steps in your procedure according to the guidelines in 112609.
    Regards,
    Gaurav

  • How to e mail the revised and signed docs to the other w/o missing them.

    How can I e mail the docs I added some texts and signed over the original docs without missing them. I tried and I all missed the added part. It was sent the ordinal doc as is.
    Please give me some advice.

    Hi
    MAIL: to Configure the Mail settings in the Tcode SCOT with the help of a basis person
    and use the Medium as MAIL (7) instead of 1(printout)
    and see that the receipient mail id (customer) are maintained properly and it should fired in the driver program..
    Just we have to check the Output from the fun module
    ADDR_GET_NEXT_COMM_TYPE which is there in driver program
    REFER SDN LINK how to mail invoice as pdf to customer

  • Ordinal 459 could not be located in dynamic link library.urlmon.dll What the heck is this and how do I fix it?

    I get the following message:the ordinal 459 could not be located in the dynamic link library. urlmon.dll. I get this when requesting list links within a genealogy program (not on the internet) Haven't noticed it on anything else yet because I have been obsessing over just that one program. At the same time I notice that my windows sidebar is not visible. Have not changed any settings. Java was disabled due to the recent exploitation. Would that have something to do with it. Or perhaps Firefox18 installed and then it went bad? Thanks in advance for any help. Running Vista.

    If this issue is caused after you have applied MS13-008 which is a security update then I would think that this is a Firefox issue and that something changed and they have to find a new way to do what they where doing before the update.
    However since the error message states it can't find the file urlmon.dll has anyone checked on why this file is missing or why it is not registered? Since URLMON.DLL is not updated by MS13-008 I would suspect this could be a coincidence.
    Here is a related Microsoft KB article about that dll causing similar issues with IE and how to address it.
    http://support.microsoft.com/kb/281679
    I mean a quick google of that exact error message "The ordinal 459 could not be located in the dynamic link library urlmon.dll" has results of this problem going back to at least 2011 long before MS13-008 was released. There are a number of solutions as well for different situations posted.
    It may be worth checking some of those is the Microsoft KB above doesn't help.
    And yet I am left thinking that Tyler's statement from January 16 about it being reported by other uses and apparently being caused by malware is the most likely reason for this issue. He does know Firefox rather well, and he is an employee of Mozilla. So I really would start with his suggestions of checking out their KB's he listed:
    https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware
    https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • The ordinal 139 could not be located in the dynamic link library iertutil.dll

    I am getting this error while launching IE on my computer:
    The ordinal 139 could not be located in the dynamic link library iertutil.dll
    I have IE 11 installed on windows7 32 bit.

    Hi Bansal,
    When does this error start to occur? Check Event Viewer and see if we could find any other messages.
    Take a try with the SFC command:
    Use the System File Checker tool to repair missing or corrupted system files
    Further, try the following if SFC won't help:
    How to repair or reinstall Internet Explorer in Windows
    Best regards
    Michael Shao
    TechNet Community Support

  • Partner application configuration is missing error on SSO login page

    We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
    We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

    Did you try checking the partner application entries on the SSO-login server page?
    please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
    also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

  • HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV.

    A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

    It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

  • Songs that I have purchased are missing in iTunes (file not found/exclmation point), and do not show up in the iTunes Store for download.

    I have a laptop that has (or had) pretty much all of my music, both burned from CDs and downloaded from iTunes. My 17 year old son on occasion syncs his iPhone and iPad with this laptop. As of the last sync (as best I can determine), many songs that I purchased in the past few years are now missing, in that they have an exclamation point to the left of the song title, and when I try to play the song, I get an error message that says "The song could not be used because the original file could not be found" or something to that effect. As it turns out, the file seems to be erased. This has happened multiple times, and I could be wrong, but I believe that there are some songs that had the exclmation point last time he synced that now don't, and vice-versa. There is not an obvious correlation or grouping as to why these songs are missing (e.g,. they were not all purchased on the same date, not all songs from one artist are missing, etc.).
    Since most of these songs have been purchased through iTunes through my account, my reaction was to go to the iTunes store, log in with my account, and re-download them. Problem is, all of these songs instead ask me to purchase the song, instead of displaying a "cloud" logo. Therefore, it appears that I have to re-purchase these songs, which does not sound correct.
    Questions: Does anyone know, most importantly (to get an immediate fix):
    1. How can I re-download these songs and why doesn't iTunes Store recognize that I have already purchased them?
    and perhaps as important (more of a long-term question):
    2. Why does this happen and how can I prevent this from happening again (since it has happened multiple times)?
    Thanks.

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • Regarding Field Missing in Dso Transformation

    Hi
    Folks
    I am facing the issue like
    In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object  0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
    so How can i get the field in DSO to Cube transformation.??
    any settings have to be change???
    waiting for yours Valuable answers
    Regards
    Anand

    Hi,
    Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
    Regards,
    Srinivas

  • Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

    Options -> Text Editor -> C/C++ missing intellisense entry.  Intellisense not working.    Solutions to turn options for the editor off and on are not working.  The intellisense entry is present for other languages,
    such as C#, but not C/C++.
    By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

    Hi JerroldBrody,
    Thank you for posting in MSDN forum.
    >>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
    Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
    Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
    So please try to check if you set Disable Intellisense property as False in the VS IDE.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Loops "missing" but still in library

    Upon update, many loops went 'Missing" although they are in the loop library still.
    Have tried several attempts to re-index loops to no avail.
    For instance, "Live Edgy Drums 07" remains, but "Live Edgy Drums 29.2" does not and has no sound.
    in sound effects, "Airplane Takeoff" is in the loop library and is functioning, but "is not found" in my composition.

    how do i get them back into my playlist?
    On the left side ofTunes, drag from Library -> Music to the playlist you want it in.
    why does it keep doing this?
    Are you deleting the playlists the song(s) are in?

Maybe you are looking for