Org Unit Display

How do everyone,
I have a selection screen with the following select option:
SELECT-OPTIONS: so_orgid FOR p0001-ORGEH.
This works fines and displays a pop up containing all the org. units and their
descriptions.
However, I really want to display the pop up like as in HR org unit structure display
where you can drill down and include one or more org units.
Does anybody know if this can be done?? Any help would be very grateful.
Thanks

Hello Andy
You may have a look at the following objects:
- fm RH_OBJID_REQUEST
- collective search help HRBAS00OBJID
Regards
Uwe

Similar Messages

Teamviewer - All positions in Org Unit display depth between EP5 and EP6

We are in the process of upgrading our HR Portal from Version 5 to Version 6 (SP14) and have encountered an issue with the Team viewer functionality.
In our EP5 system when the user selects the dropdown option for 'All positions in org unit' it is picking up our Configuration limiting it to showing only 3 structure levels and when an attempt is made to display lower levels the expander changes but no more levels are shown (e.g. Expander icon changes but does not render the lower level).
In our EP6 system when the user selects the dropdown option for 'All positions in org unit' it is ignoring the same Configuration and lets the user select down to the bottom of the organisation. This will obviously have serious performance implications and so must be corrected if we are to implement this upgrade.
To test the situation we deployed the following par files from our EP5 system to our EP6 system and found that we achieved the required result of only allowing the configured levels to be shown:
com.sap,pct.hcm.objectanddatprovider.par
com.sap,pct.hcm.orgmanagementeventing.par
com.sap,pct.hcm.teamviewer.par
This points to an issue between these files from the EP5 version to the EP6 version.
Has anyone else experienced an issue with how the EP6 teamviewer handles the 'All positions in Org Unit' selection, and if so can you let me know any solution you have to it?
(Note: This selection used Eval Path MDTSBESX)
Message was edited by: Steve Caffrey

Hello Sandeep,
Unfortunately the only standard functionality is to change the rankings of the positions within transaction ppome. Therefore you have the buttons 'Move up in rank' and 'Move down in rank' in the overview area of the ppome. As you know if the field PRIOX in the table hrp1001 is empty, the transaction sorts the positions by OBJID. So perhaps you could create a abap program to change this standard functionality to insert values into field PRIOX for the corresponding relationship in HRP1001 that you want to sort.
Best Regards
Christine

Orgchart org unit display order

Hello,
We are implementing Orgchart Accelerated. Our customer would like to arrange the display order of organizational units based on a criteria and not alphabetically by org unit name, like it is done in the standard version of the product.
Is there a way to do this?
Thanks,
Laurent

Yes. Are you doing this in live or staged?
If you want to sort by a field already available in the field set then you can do this via the Administrator console (note this only allows for sorting by asc order). To sort descending you will need to make a small change in the AppResources.xml ... look for attribute "defaultsort=" and change from default value of asc to desc in relevant hierarchy configuration.
If the field isn't available then doing it in live will be tricky ... doing it staged will involve extract the field you want to sort on and sorting based on this. If it is an order based on a combination of fields then previously I've added a "sort order" column and populated using SQL statements then used this in the application to sort on.
Regards,
Stephen

Org Unit and Cost Center not displaying in 0001 with A012 relationship

Hi Guru's,
Kindly help me in this regard ,
Whenever i hire a person to a position which has an A012 relationship (Chief Position) then Org Units and Cost centres are not getting displayed in IT0001 .
But when i hire a person in the same org unit with A003 relationship ; both Org units and Costcentres are getting displayed
I have used an LSMW for uploading relationships and objects and i have also run integration reports for the same but still i am not able to display org unit and cost centre in it0001 when i hire a person with A012 relationship .
Kindly Help

both great advice, also, check this link:
http://help.sap.com/saphelp_45b/helpdata/en/14/d22fe48435d111950d0060b03c6b76/content.htm
within this information there are various reports to run, which help recon OM and PA integration. it will help you find your data problem and then fix the data for you if you follow step by step.
best regards,
michael

Org unit not displaying in Payslip

Hai all
In production, we have maintained Org Structure and assigned persons. Payroll live run is completed. But in the customized payslip, the org unit is not displaying. That org unit is there in the Org structure, in WPBP table also its displaying, but in the table T527x the same Org Unit is not there.
What could be the reason for not included in the table t527x, probably thatu2019s the reason why its not displaying in the payslip. ( the program picks the Org unit from T527x table)
But other Org units which are there in T527x table, are displaying fine in the payslip
Please suggest what to do
Thank you

If you are using OM module, then you dont have to maintain values in T527X table.
Instead, i guess some customisation is missing in the payslip to fetch the data. are you using HR forms or is it through PE51 you are creating customised form?
If through PE51, then from then, click on the Window and choose change. In the top of the window screen, where you can maintain the screen header information, you store
*Department : BTRTL_______________ *
This will help you fetch the department details i.e. org unit
Regards,
Pranitha

Display positions in Org unit sorted by Position Desc

Hi All,
Can you please let me know how the positions in an Org unit can be displayed in sorted order by position description? Like in PPOME when you display/change an Org unit we should be able to see similar positions displayed together in sorted order based on their description and not the eight digit object id.
Thanks!
Sandeep

Hello Sandeep,
Unfortunately the only standard functionality is to change the rankings of the positions within transaction ppome. Therefore you have the buttons 'Move up in rank' and 'Move down in rank' in the overview area of the ppome. As you know if the field PRIOX in the table hrp1001 is empty, the transaction sorts the positions by OBJID. So perhaps you could create a abap program to change this standard functionality to insert values into field PRIOX for the corresponding relationship in HRP1001 that you want to sort.
Best Regards
Christine

Entries & Leaving Report displays data of selected not equal to org unit

Hi,
While using the standard report Entries & Leaving; in the selection criteria when I put
NOT EQUAl TO(options) in front of the org unit and and mention the corresponding personnel area and entry date, the report still displays the employees with that particular org unit.
Why is this happening? Any idea how to correct this?

Hi Sikindar,
I am using standard adhoc query report Entries& Leaving.( S_PH9_46000223 ). There on the selection screen I enter the following values:
Personnel Area: GLLV
Org Unit : #(Not Equal To) 60000047
Entry Date : 1.11.2008 to 28.11.2008> F8
Now the report also displays the employees which belong to o 60000047 which is incorrect.
This is the exact problem and how to rectify this. Please suggest

Display Org Unit based on User logon in Business partner creation..

Hi Gurus,.
I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data. When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai. How to address this scenario thro standard customization?
Is it common problem in CRM Webui(6.0 and 7.0).
My Org Structure:
Global
China
     Shangai
     Beijing
   Nanjing.
Thanks in Advance....

Hi Varma,
From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
Hope this helps.
Thanks,
Samantak.

Report to check org units without any position display

Dear All,
I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
Regards,
HR user

Yes, the Report is
S_AHR_61016493-Organizational Structure-Organizational Structure
Select the first line and press F8

Team Calendar for Parent & Child Org. Unit Display

Hi Experts, We have a requirment to show child org. unit employees which is associated with parent org. unit. When a employee is in parent org. unit he should be able to see the employees in child org. unit in the team calendar, this is the requirment. In V_PTREQ_TEAM we are maintaing 00000001 SAP Standard 01.01.1800 31.12.9999 Team View Mode View Group (MSS) ESS_LEA_EE In V_TWPC_OBJSEL Object Selection : ESS_LEA_EE_DIR Rule for Objects :ESS_LEA_RULE1 Rule for Target Objects : ESS_LEA_RULE5 In VC_TWPC_OBJSELRULE ESS_LEA_RULE1 is for Org. Unit with evaluation path PTXSSORG ESS_LEA_RULE5 is for Person with evaluation path PTXSSDIR But I have tried here with coster evaluation path and other evaluation path, But desired result is not achieved. Do we have to use here any specific funtion module here in VC_TWPC_OBJSELRULE. Please advise. Regards, IFF

Hi,
Go through the below link if it is helpful to you any way, I think you might need to do some customizations.
http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2014/02/07/manager-self-service-mss--mss-team-view-managers-who-do-not-hold-chief-position
Regards,
Mohsin.

HR Report to display headcount up to 10 levels of Org Units

Hi Experts,
Can you please give steps for the following requirement.Is there any standards available.Please explain the procedure to create report.
Points will be awarded fot the suitable solutions.
The report shouldl query SAP for the number of employees based on the personnel area and sub area. The main reporting is based on the sub area. If the employee is in the India Pers Area the total number of employees from each sub area will have to be deducted from the headcount for that sub area and added to the India area for headcount totaling.   For each of the areas/subareas we need to gather the total number of Active Employees, Temp Employees and Contractors. This information can be gathered from the employee group.
i/p filed                         available table
Key Date
Employment Status     PA0000
Personnel Area                PA0001
Personnel Sub Area     PA0001
Employee Group               PA0001
Employee Subgroup     PA0001
C stands for column C2 c3 c4 will be filled by users after running report.
         c1       c2     c3 c4             c5     c6
SEIM     70                    9     4          Pers Sub Area - FIN
NGUYEN     25                    0     1          Pers Sub Area - MKT
LUHR     120                    3     4          Pers Sub Area - SLS
DREW     532                    78     2          Pers Sub Area u2013 OPS
CHOMA     35                    2     6          Pers Sub Area u2013 ODLP
LIPPS     3                    0     0          Pers Sub Area - GAA
INDIA     79                    0     0          Pers Area - IND
TOTAL     864                    92     17     0
Thanks and Regards,
Raj

If you want to read the org unit hierarchy from the org structure, tables HRP1001 and HRP1000 should
have all the information you need. HRP1001 hold the relationships between the org structure objects
and HRP1000 holds information about each object.
If you don't want to do the selects yourself, there is a very useful function module called
RH_STRUC_GET which does the same sort of thing ie reads the relationships between org structure objects
using whatever evaluation path you pass in in parameter ACT_WEGID..

Display of total ansal for each org unit using the sdepth (depth level)

Hi all,
     We have a requirment in which we will be getting all the active employees related to a perticular org unit then For every PERNR,we need to find (as of run date) the org ID on PA0001- ORGEH and total the dollars at the org unit ID level started at the org unit defined on field ORGID and only as far down as defined on selection screen field SDEPTH.
       Example: $10k under Dept D, $9k under Dept C, $8k under Dept B and $7k under Dept A. If field SDEPTH was set to blank, each department would be assigned the above stated budget amount. If SDEPTH was set to 3, the budget would stop at the third level down the org chain (assuming A is the org unit defined in field ORGID, org unit C would be the third org down the chain). The total budget at level C would incorporate any dollars calculated from employees that fall below this org unit in the structure. In this example, the total for org unit C would be $19k, B would remain at 8k and A at 7k.
    We are making use of the FM : RH_STRUC_GET to get all pernr numbers related to a perticular org unit and sub level units separately and also RP_ANSAL_FROM_WAGETYPES for getting ansal based on the wahge types (multiple wage types can be provided by the user on the selection screen) .
Please let me know how can i achive the requirement.
Regards,
Zareena.
Edited by: zareena molla on May 20, 2008 7:14 AM

Thanks Dan.
Appreciate if you can help on the below points as well.
1. As part of divestiture/transfer postings: The system is reversing some Previous Year(PY) equity accounts into themselves. How can we get the system to eliminate them by posting to COI Clearing account. Basically, we dont want the PY accounts to be touched?
For the Retained earnings - PY account, the system is actually posting to COI clearing account.
These PY accounts are part of some scopes for equitization.
Is there any link between the "balance carry forward" - list of items table and the divestiture postings?
Does the system check this table while posting/reversing the equity(PY) accounts?
2. I want to understand the sequence in which the system posts the documents at the old parent and new parent (group) level.
The same activity number is there for Total Divestiture, total transfer documents posted at new parent level and total divestiture document posted at old parent level.
Does the system follow bottom up approach? Thereby creating total divestiture document at old parent level.
Followed by documents at upper level (new parent level)
Also , at the upper level(new parent level), does it post documents in the way they are shown in the log? (We havent changed the default sequence maintained in UCWB - COI settings). so it will post first consolidation doc, followed by total divestiture, followed by total transfer docs at the new parent level?
Is this the reason for the double value being posted at new parent for equity holding data?
Will studying the statistical items (corresponding to eliminated equity holding items) be relevant here to understand why at upper level there is double the value being posted by system?
Thanks.

Explanation about PPOSE (display of sub org unit)

Hi everybody,
I am beginner in Sap HCM OM and I don't understand something in transaction ppose.
There is Org unit 50271758.
This org unit has different sub org units .
But depending on the start date and the preview period I set in the setiings, the sub org units appers or disappears.
The view of the sub org unit and the objects depends on that but I don't understand the logic.
I would really apprecitae if somebody helps me because I am completely lost.
Sometimes I see an arrow before the sub org 'Object to be removed' Object to be added' and I don't understand why.
Thanks very much in advance for your help

Hi,
Please check:
http://help.sap.com/erp2005_ehp_05/helpdata/en/3f/083b37b0fd2e71e10000009b38f936/frameset.htm
Source: help.sap.com
Hope this helps.
Donnie

Org Chart 3.0 - Print button on Org Unit's Profile not working

Hi,
In Org Chart, after we click on the Org Unit, then the details will be displayed on the right panel.
We clicked on the Action button on the right panel, and click on the Org Unit Profile, a new window will be opened.
Now, clicked on the small printer button on the top right corner.
It will opened a new window with print preview to print that profile page.
However, the print preview is empty, and when we printed this out, we get a blank page.
CDS.log
ERROR com.nakisa.Logger - PrintPreview.ascx : createPrintPages : Could not load preview. No HTML pages were found
INFO com.nakisa.Logger - Invoking action:setCss [<link rel="stylesheet" type="text/css" href="../_Themes/Buttons.css"/><link rel="stylesheet" type="text/css" href="../_Themes/orgChartTheme.css"/><link rel="stylesheet" type="text/css" href="../_Themes/OrgChartLines.css"/><style>.showPrintSectionBox{display:block;}.hidePrintSectionBox{display:none;}</style><link rel="stylesheet" type="text/css" href="../_Themes/NOMS_Style1.css" />]. For processor Printing. Against controller Printing
INFO com.nakisa.Logger - setCss on Printing took: 0ms
INFO com.nakisa.Logger - Invoking action:updatezoomlevels [undefined]. For processor UpdateSettings. Against controller UpdateSettings
ERROR com.nakisa.Logger - java.lang.NumberFormatException: For input string: "undefined"
INFO com.nakisa.Logger - updatezoomlevels on UpdateSettings took: 1ms
ERROR com.nakisa.Logger - PrintPreview.ascx : createPrintPages : Could not load preview. No HTML pages were found
INFO com.nakisa.Logger - Invoking action:setCss [<link rel="stylesheet" type="text/css" href="../_Themes/Buttons.css"/><link rel="stylesheet" type="text/css" href="../_Themes/orgChartTheme.css"/><link rel="stylesheet" type="text/css" href="../_Themes/OrgChartLines.css"/><style>.showPrintSectionBox{display:block;}.hidePrintSectionBox{display:none;}</style><link rel="stylesheet" type="text/css" href="../_Themes/NOMS_Style1.css" />]. For processor Printing. Against controller Printing
INFO com.nakisa.Logger - setCss on Printing took: 0ms
INFO com.nakisa.Logger - Invoking action:updatezoomlevels [undefined]. For processor UpdateSettings. Against controller UpdateSettings
ERROR com.nakisa.Logger - java.lang.NumberFormatException: For input string: "undefined"
INFO com.nakisa.Logger - updatezoomlevels on UpdateSettings took: 0ms
This same problem happens on Position's Profile.
How do we fix this print problem?

Hi Luke,
In General Settings, I have defined Company Title, URL, and Logo.
Together with Allow Switching Between Modes, Set Standard Mode as Default, and Enable Effective Dating are enabled.
In Print preferences, Size is set to A4, Landscape, CM. The rest are all unchecked and Export settings are all enabled.
Am I missing some setting to cause the error?
Regarding the file SettingsResources.xml, it's encrypted in our .delta folder but it's decrypted in Admin_Config\SAP_DB2

Empty start validity date for an org unit

Dears!
some time ago we discovered a disturbing issue in Productive data. Some org units have an empty start date. I have no idea how it could be created by users, but now we need to solve it.
The records with empty start date are visible in PP01 only in Display mode.
The program RE_RHBEGDA0 (New start date) doesn't help. After running the new record for an object is created but there is still remaining the record with empty start date, but with shifted end date...
Do you have any idea how to solve this?
Thanks all in advance,
Anastasia

Hi,
You are right - user definitely couldn't create it. Probably you need to ask you ABAPer.
I can suggest you to try to copy original record and replace empty start date with valid one: PP01, IT1000, copy, change start date, save.
Cheers!

Org Unit Display

Similar Messages

Maybe you are looking for