Team Calendar for Parent & Child Org. Unit Display

Hi Experts, We have a requirment to show child org. unit employees which is associated with parent org. unit. When a employee is in parent org. unit he should be able to see the employees in child org. unit in the team calendar, this is the requirment. In V_PTREQ_TEAM we are maintaing 00000001 SAP Standard 01.01.1800 31.12.9999 Team View Mode View Group (MSS) ESS_LEA_EE In V_TWPC_OBJSEL Object Selection : ESS_LEA_EE_DIR Rule for Objects :ESS_LEA_RULE1 Rule for Target Objects : ESS_LEA_RULE5 In VC_TWPC_OBJSELRULE ESS_LEA_RULE1 is for Org. Unit with evaluation path PTXSSORG ESS_LEA_RULE5 is for Person with evaluation path PTXSSDIR But I have tried here with coster evaluation path and other evaluation path, But desired result is not achieved. Do we have to use here any specific funtion module here in VC_TWPC_OBJSELRULE. Please advise. Regards, IFF

Hi,
Go through the below link if it is helpful to you any way, I think you might need to do some customizations.
http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2014/02/07/manager-self-service-mss--mss-team-view-managers-who-do-not-hold-chief-position
Regards,
Mohsin.

Similar Messages

Process control inheritence to child org units - GRC 10.0

Hi All,
We created few process controls in Parent Org Unit - X. We assigned mitigation control ID and access risks to these controls along with control owners. These process controls are being used as Standard Global Controls
We created another Child Org Unit - Y and copied the sub-process and then selected only 1 or 2 controls which are applicable to the Child Org Unit. This will allow us to use few Global controls and create local controls if required.
Now the issue we observed that the Child Org Unit does not carry the Mit. Ctrl ID & Access Risks & Owners from the same control of Parent Org Unit. When we tried to provide the same Mit. Ctrl ID it is stating Mit. Ctrl is not UNIQUE.
Our requirement is we would like to have the same Mit. Ctrl ID for Global Controls both at Parent & Child Org Unit and different Mit. ID for local controls at Child org unit. This will be easy to identify controls which are from Global & Local for testing and other reporting purposes.
We understood that since we are copying the sub-process to Child Unit it is taking only Process control details, not the access control information as it is provided in Org Unit
Can somebody please guide how to acheive the above requirement. How to inherit all the controls from Parent to Child Org unit reflecting Mit. Ctrl ID, Access Risks and Owners
We are on PC 10.0 - SP07
Thanks and Best Regards,
Srihari.K

Hi Sabita,
Did you check this article on Content Life Cycle Mngt supports all SAP GRC products. Check the link for detailed article and I hope this would be right direction for your company to go.
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/e0431d8f-2298-2e10-5fb0-87840e285f4c
warm regards,
Asok Christian

I have to find the 10,000 levels below the Child Org unit based on Parent o

Hi,
My requirements is that Use enters a Root organisation in the selection screen , based on which I have to find out and display
the Child org units upto 10,000 levels. Can anyone pls tell me how to proceed ??.

You can use SAP function 'RH_STRUCT_GET'with objectype = 'O', objid = provided org, evaluation path (ACT_WEGID) = 'A002', depth (ACT_TDEPTH) = 1000 .
Rgds.

Parent Child Dimension Not displaying Name value.

I have a parent Child attribute in my dimension. It show the correct ID value in the reports but when I change the value from the NameColumn to be something else it still only shows the ID value.
I have an identical case in another dimension and it is working correctly. However this dimension for some reason does not seem to work and I believe they are built the same way I must be missing something. I have tried to show the OrgNodeID
and tried to display the OrgNodename but neither displays all it displays is the intdimParentOrgNodeID.
My dimension table looks something like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID)
intDimParentOrgNodeID
intOrgNodeName
In the Propertys I have set
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumn = tbldimOrgNode.intOrgNodeID
Parent-child values
=NonLeafDataVisible
=*(Direct)
=
=ParentIsBlankSelfOrMissing
=(none)
Ken Craig

I have been pulling my hair out for days to find this and what I finally found that resolved this shocked me and I am still not sure why it would matter. You can see below my table and then dimension info. Although I agree my OrgNode ID attribute
is really not needed in AS and could be removed.   In places where that is used we could instead rename the key column Dim OrgNode ID to OrgNode ID.    However why the key attribute must have the name column set to intOrgNodeID
instead of just using the Key value of intdimOrgNodeID is what I am lost at.
Outside of this parent dimension I have never seen issues with this. I want to say sometimes in the past I have seen duplicates if I use the surreget key to display the actual ID so I have normally left that as a key and just added another attribute
to house the actual ID, like I did below.
Can someone explain to me this and what is the best suggested practice here.
My table is like this
intdimOrgNodeID int Key (surreget key)
intOrgNodeID int (Actual ID from source and used by customers)
intDimParentOrgNodeID (ID used for parent child (it is the Parent intOrgNodeID surreget
key intdimOrgNodeID))
intOrgNodeName (Source Name)
My AS dimension is like below
Dim OrgNode ID
AttributeHierarchyVisible=False
KeyColumns = tbldimOrgNode.intDimOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
OrgNode ID
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intOrgNodeID (Integer)
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
OrgNode Hierarchy ID
Usage=Parent
AttributeHierarchyVisible=True
KeyColumns = tbldimOrgNode.intDimParentOrgNodeID
NameColumns= tbldimOrgNode.intOrgNodeID (WChar)
Change I had to make was this
Dim OrgNode ID
From     NameColumns= tbldimOrgNode.intDimOrgNodeID (Integer)
to
NameColumns= tbldimOrgNode.intOrgNodeID (Integer)
Ken Craig

CATS - How to enter times of an employee who works for 2 different Org Unit

Hi,
I am able to successfully enter times for an employee and do the approval process (CAT4) and CAT6 and I can see the records getting updated in PA30.
Scenario :
Employee works for 2 different Org Units and should be able to enter his time through Timesheet. Eg: Employee A spends 6 Hours working in Department B1 & 3 Hours in Dept B2.
The Manager of B1 should only be able to approve 6 Hours of Employee A
The Manager of B2 should only be able to approve 6 Hours of Employee A
Can somebody help me out how this can be achieved?
Regards,
Mamta

Hi Sameer,
Thank you for the response. Yes, when I report the times for 2 different org units I would also want the cost for that employee distributed between org units.
I tried your solution-> by entering times in CAT2 for Employee A for 2 different Cost Centers that I created.
For Department B1 --> In CAT2 I entered Cost center C1 : 6 Hours
For Department B2 -->In CAT2 I entered Cost center C2 : 4 Hours
When I go to CAT4 and try to select the employee for approval and search the employee-A Org unit wise he is displayed only in his original Department -> B1 with 10 hours (6+4). What else do you think needs to be done?
Is this anything to be done with Sender Receiver Cost Centers because the cost center C1,C2 that I created for Org Units B1 & B2 respectively are just Cost Centers. I dont know the difference between Costcenter and Sender Costcenter/Receiver Costcenter.
I will try to explain the scenario again in case I was not clear :
u2022Each employee has their home OU. However these employees may be working with multiple OU each day or the week. So potentially, the time sheet may have to be approved by multiple managers.
Regards,
Mamta

How to get subordinate org units for a given org unit within specific dates

hi,
How to get subordinate org units for a given org unit within specific dates

Use the following Func module ..
HRWPC_RFC_STRUCTURE_GET
*--Get the sub org.unts for the given selection.
    CALL FUNCTION 'HRWPC_RFC_STRUCTURE_GET'
      EXPORTING
        ROOT           = root_org   <-- Give the Org unit
        EVPATH         = 'O-O_DOWN'
        BEGDA          = s_date-low
        ENDDA          = s_date-high
      TABLES
        T_OBJEC        = t_objec
        T_STRUC        = t_struc
      EXCEPTIONS
        NOTHING_FOUND = 1
        INTERNAL_ERROR = 2
        OTHERS         = 3.
    IF SY-SUBRC <> 0.
      MESSAGE i000 WITH 'No Sub Orgunits for ' s_objid-low.
    else.
*--Prepare final sub org.units tabl.
      loop at t_objec.
        if t_objec-objid ne s_objid-low.
          it_orgunit = t_objec-objid.
          it_orgunit-begda   = t_objec-begda.
          it_orgunit-endda   = t_objec-endda.
          APPEND it_orgunit.
        endif.
      endloop.
    endif.

Teamviewer - All positions in Org Unit display depth between EP5 and EP6

We are in the process of upgrading our HR Portal from Version 5 to Version 6 (SP14) and have encountered an issue with the Team viewer functionality.
In our EP5 system when the user selects the dropdown option for 'All positions in org unit' it is picking up our Configuration limiting it to showing only 3 structure levels and when an attempt is made to display lower levels the expander changes but no more levels are shown (e.g. Expander icon changes but does not render the lower level).
In our EP6 system when the user selects the dropdown option for 'All positions in org unit' it is ignoring the same Configuration and lets the user select down to the bottom of the organisation. This will obviously have serious performance implications and so must be corrected if we are to implement this upgrade.
To test the situation we deployed the following par files from our EP5 system to our EP6 system and found that we achieved the required result of only allowing the configured levels to be shown:
com.sap,pct.hcm.objectanddatprovider.par
com.sap,pct.hcm.orgmanagementeventing.par
com.sap,pct.hcm.teamviewer.par
This points to an issue between these files from the EP5 version to the EP6 version.
Has anyone else experienced an issue with how the EP6 teamviewer handles the 'All positions in Org Unit' selection, and if so can you let me know any solution you have to it?
(Note: This selection used Eval Path MDTSBESX)
Message was edited by: Steve Caffrey

Hello Sandeep,
Unfortunately the only standard functionality is to change the rankings of the positions within transaction ppome. Therefore you have the buttons 'Move up in rank' and 'Move down in rank' in the overview area of the ppome. As you know if the field PRIOX in the table hrp1001 is empty, the transaction sorts the positions by OBJID. So perhaps you could create a abap program to change this standard functionality to insert values into field PRIOX for the corresponding relationship in HRP1001 that you want to sort.
Best Regards
Christine

Team Calendar for non-manager in Leave Request

Hi ,
It seems like only Manager can see the Team Calendar in Leave Request or others ? Can a non Manager also see the Team Calendar , so he can see who is in the office and who is out .
Any help will be appreciated .
Thank you .

In the SAP standard, the evaluation path SAP_MANG is used to determine
the root objects. This evaluation path determines root objects whose
manager holds a chief position (please take a look at the F1
documentation of the field "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information on
this topic).
In your case, however, chief positions are not used and thus you'll
need to use a different evaluation path to determine the root objects
(e.g. WF_ORGUN) in the above-mentioned view.
Since you are seeing in leave request application.
You can use the report RHSTRU00
1. The DC pcui_gp/tecl had to be deployed to J2EE engine.
2. Note 704604 has to be implemented.
3. The Org.Unit conif has to be correct for the employee
4. View group has to be maintained in V_TWPC_VG.
5. Leave req. application has to work
also refer this
http://help.sap.com/saphelp_erp2005/helpdata/en/
c5/e4b2c8453d11d189430000e829fbbd/frameset.htm
Also make sure that customer Entries V_TWPC_VG_C are not
defaulting other values too.

Siebel BIP Integration Objec for Parent, Child and Grand Child

Hi,
I 'm trying to create a one report for displaying Parent, Child and Grand Child.
Service Request
- Quote
- Quote Item.
Successfully create the BIP Integration object and generated the xml file. problem here is when trying to include the fields in BIP desktop word, not able to see the grand child fields, could see only the parent and child fileds and for grand child only 'ListOfQuoteItem' text.
Could some one please let me know the reason for this behavoir and wherther BIP supports 3 levels.
Is there any Out of Box Siebel report showing parent, child and grandchild.
Thanks,
Ravi kanth

One Siebel Adapter Upsert operation should be sufficient to insert the parent and child. In the Integration object definition, you define the Template child instances with the Parent of Template. i.e
You define Template first as an Integration Component and then define
Template child instances to have a Parent as Template.
Thanks
Swarna

Org Unit Display

How do everyone,
I have a selection screen with the following select option:
SELECT-OPTIONS: so_orgid FOR p0001-ORGEH.
This works fines and displays a pop up containing all the org. units and their
descriptions.
However, I really want to display the pop up like as in HR org unit structure display
where you can drill down and include one or more org units.
Does anybody know if this can be done?? Any help would be very grateful.
Thanks

Hello Andy
You may have a look at the following objects:
- fm RH_OBJID_REQUEST
- collective search help HRBAS00OBJID
Regards
Uwe

Orgchart org unit display order

Hello,
We are implementing Orgchart Accelerated. Our customer would like to arrange the display order of organizational units based on a criteria and not alphabetically by org unit name, like it is done in the standard version of the product.
Is there a way to do this?
Thanks,
Laurent

Yes. Are you doing this in live or staged?
If you want to sort by a field already available in the field set then you can do this via the Administrator console (note this only allows for sorting by asc order). To sort descending you will need to make a small change in the AppResources.xml ... look for attribute "defaultsort=" and change from default value of asc to desc in relevant hierarchy configuration.
If the field isn't available then doing it in live will be tricky ... doing it staged will involve extract the field you want to sort on and sorting based on this. If it is an order based on a combination of fields then previously I've added a "sort order" column and populated using SQL statements then used this in the application to sort on.
Regards,
Stephen

No data for Parent-child hierarchy column in Pivot table view

Hi all,
I used OBIEE 11.1.1.6.2 Version.
I drag one Parent-child hierarchy column and one measure and show result with a pivot table view.
But when I click "+" icon to show detail level data,
It messaged that: "*the layout of this view combined with the data,selections,drills,or prompt values chosen resulted in no data*."
But it can show every-level data when I used table view.
It was so strange..
Did anybody meet this before?
Thanks in advance.
regards,
Anne

Hi,
Yes, I have the same problem with pivot table for hierarchy dimension.
If you use a normal table (not pivot) it seem to work. Unfortunatley with restrictions as normal table view have.
Same problem still exist in 11.1.1.6.5
I have logged a SR to Oracle about this.

Inspection for Parent Child Relation

Hi
We are producing Mat.A from Mat .B and you want to copy the results from Mat.B .
Both materials are batch managed.
The requirement is - At the inspection for Material A , want to use batch derivation to copy results of Mat B (Parent Child Process)
Please Guide ..
Please schare Doc if available ..
Mayank MEHROTRA
Or in other words..
Whether its possible to transfer the characteristics values of the batch from parent materia (MOM Materials)l to Child Materials
Edited by: Mayank MEHROTRA on Jul 30, 2010 2:19 PM

Hi Mayank,
We had the same issue in one project. What we did, we develped a z- transaction and program for that.
We had child batches, for eg, 1234561,1234562,1234563,1234564. here the mother batch is 123456. so we recorded value for this mother batch in MSC1N. In developed z transaction, we had a field called "mother batch" and next two fields as "from child batch" and "to child batch". So make entry in these fields and execute. Data will be populated automatically.
Sit with a good ABAPer, he will be able to develop the same.

SQL for Parent-Child Hierarchy

Please suggest which would be best way to achieve the below logic.
SQL to pick up parent child relationship within same table with a certain logic.
Example:
mod_product_number     Product_Hierarchy
H555888     PH05678
H888987     H555888
H8889     H555888
H9955     H555888
H999999     H555888
P6666     H999999
P5555     H999999
Example: I expect the rows with H8889,H9955 & P6666 & P5555 to be sub-category values value for product hierarchy H555888.
If there are rows with H8888987 as Product_hierarchy, we will pull up those rows too for product hierarchy H555888.
The extra condition is we drill down only on 7 character mod_prod_number not on 5 character mod_prod_number. We pull out all sub category mod_prod_number for all distinct Product hierarchy.

You can use Hierarchical Queries
See.. http://docs.oracle.com/cd/E11882_01/server.112/e10592/queries003.htm
select lpad(' ',2*(level-1)) || to_char(trim(t.mod_product_number)) prod,
SYS_CONNECT_BY_PATH(t.product_hierarchy, '/') "Path",
LEVEL
from temp_table t
start with trim(t.product_hierarchy) = 'PH05678'
connect by prior trim(t.mod_product_number) = trim(t.product_hierarchy);
.     PROD          Path                    LEVEL
1     H555888          /PH05678                1
2       H8889          /PH05678 /H555888           2
3       H888987     /PH05678 /H555888           2
4       H9955          /PH05678 /H555888           2
5       H999999     /PH05678 /H555888           2
6         P5555     /PH05678 /H555888 /H999999      3
7         P6666     /PH05678 /H555888 /H999999      3

Do the custom rollup member formulas work recursively for parent child dimension?

Hi
We have custom rollup set up for Account dimension which is parent child.
It seems to work fine when the custom member formula refers to a base account member i.e. if the formula for MemberKey4 is (MemberKey1 + MemberKey2) then it shows the sum of the underlying members 1 and 2.
But if the formula for MemberKey10 is (MemberKey3 + MemberKey4) then it should evaluate the value for MemberKey4 first and then add to it value for MemberKey3 to come up with final number for MemberKey10.
Do the custom rollup work fine with the recursive calculations? Is this recursion limited to some level?
Thanks
Shailesh

Hi Jorg,
Thanks for your input.
Actually the hierarhcy is more determined by the parent child relationship. So we cannot move the members as per the formula. And further the formulas are not always additive, there are divisions and multiplactions happening also.
Further the calculated members (account members) are used in different places, the usage level of calculated members could be 3 in some cases i.e. MemberKey15 = (calculated using MemberKey10 = (calculated using MemberKey7 = (Calculated using MemberKey4 = (calculated using base members)))). Now inserting the base members in place of a calcuated member becomes more of string manipulation.
And on the top of above complexity, the formulas are not static and they are more user defined, they may change between time periods, which forces us to write a dynamic procedure to translate the 'business formula' into SSAS formula. We expect the custom rollup to work as expected (i.e. if the formula contains a calculation involving the calculated member, it should resolve that first and so on) and we have written generic procedure to replace the Account Code in the 'business formula' with the accont key value with the account hierarchy char string.
In the link http://doc.ddart.net/mssql/sql2000/html/olapdmad/agmdxadvanced_6jn7.htm for AS2000, it talks about the calculation pass deapth, it says:
.......If a cube has custom rollup formulas or custom rollup operators, a second calculation pass is performed to handle the computations needed to calculate these features.......
Now from the above, it is obvious that the OLAP engine will automatically go into recursion if the formula contains a cacluated member and it knows that the calculated member has to be resolved first before calculating the final formula result. The above article also talks about 'Calculation Pass Number' property in the AdvanceCube Editor (AS2000), which can be set to the value depending on the expected number of passes required in a given scenario. I don't find such an equivalent peoperty for SSAS 2005.
Would anybody please throw some more ideas / insights on this issue?
Jorg, thanks again for your input...
Shailesh

Team Calendar for Parent & Child Org. Unit Display

Similar Messages

Maybe you are looking for