Organisation is not updating in the BP relationship
Hi,
1.
In PPOMA_CRM , i assigned my BP(employee) to one position of one organization( O1).
Then I open the BP transaction. i went to the relationship . I am able to see the Organization O1 in the "Is employee of" relationship.
2.
Again i went to PPOMA_CRM , i deleted my assignment of my BP(employee) from the position of organization( O1).
Then I open the BP transaction. i went to the relationship . I didnt see the Organization O1 in the "Is employee of" relationship.But sometimes the Organization is not getting deleted from the BP relationship.(This is the Problem i am facing).
To reproduce this issue. I tried as below.
1. Open BP tcode.
2. Enter the BP no and goto Relationship
3. Then Open PPOMA_CRM
4. Asssign BP to one Org
5. Then come to BP . The updated Org will not display.. Reopen the BP and check Relationship. U can see the correct Org.
6. After that in the same session of BP , try to delete that Org using the Delete Button below.U wil get error message .
(Now you can goto SM12 tcode and check the lock entry . U can see the But050 table there. That means the table got locked).
7. Now in PPOMA_CRM, delete the assignment of ur BP from that Org.
8. Now reopen the BP again and Check the relationship. U can see the ORG will be still there. Because the table But050 is already locked in stpe 6.
But i dont think this is the right way to reproduce this issue. But i think somehow the table(BUT050) is getting locked while deleting the assignment of the BP from the Org and then save it in PPOMA_CRM, which results in wrong organization in BP relationship.
I checked in But050 . This table also updated with wrong Org
Please guide me how can i solve this issue.
Thanks
Sudhansu
Hi,
Use the SAP Note 573284. This note is applicable for 3.x and 7.0. Make sure that the system is set to modifiable in SE06 and SCC4 while running the RS_PERS_ACTIVATE program.
Hope this helps.
Regards,
Srikanth N
Similar Messages
-
Folio number not updated in the table RG23D
Hi all,
Folio number not updated in the table RG23D when I create depot excise invoice using batch program J_1IJCHK. Can any one help me by providing rootcause and solution.
Thanks in advance.
Regards
BalajiSee can i know in which version u r working,Because if u r in 4.6c there will be some problem.Some patches will be there.
Try this program i have send and assign excise duty
REPORT YJ_1IJCHK MESSAGE-ID 8I.
TABLES : J_1IEXCHDR, "excise header
J_1IEXCDTL, "excise detail
J_1IRG23D , "RG23D register
J_1IWRKCUS, "Plant level customisation
J_1IREGSET, "register set customisation
J_1IEXCDEF, "Tax default information
VBFA, "sales document flow
LIKP, "delivery header
LIPS, "delivery detail
T005, "country information
KUAGV, "sold-to-party information
KUWEV, "ship-to-party information
KNA1, "customer master
VBPA, "sales document partner
TVKO, "sales organisation to company co
VBUK, "delivery information
MAKT, "material description
T001. "company code
selection-screen begin of block delivery_details no intervals.
PARAMETERS: FCODE TYPE C,
DELIVERY LIKE LIPS-VBELN,
EXCGROUP LIKE J_1IEXCHDR-EXGRP,
SERGROUP LIKE J_1IEXCHDR-SRGRP.
TYPES : BEGIN OF RG23D.
INCLUDE STRUCTURE J_1IRG23D.
TYPES: MENGR LIKE J_1IEXCDTL-MENGR, "remaining quantity
MENGA LIKE J_1IEXCDTL-MENGA, "quantity actually rec
ADDBED LIKE J_1IEXCDTL-ADDBED,
ADDSED LIKE J_1IEXCDTL-ADDSED,
ADDAED LIKE J_1IEXCDTL-ADDAED,
END OF RG23D.
DATA : BEGIN OF J1IJ300,
BUKRS LIKE TVKO-BUKRS,
WERKS LIKE LIPS-WERKS,
REGID LIKE J_1IREGSET-J_1IREGID,
WAERS LIKE T001-WAERS,
SHIPFROM_IND TYPE C, " Added 10/12/1998
RG23D_SERIALNO TYPE C, " Added 10/12/1998
END OF J1IJ300.
DATA : TRNTYP(4) TYPE C,
CONDT-NAME(3) TYPE C,
TOTAL_LRG23D LIKE LIPS-LFIMG,
ALLOC_LRG23D LIKE LIPS-LFIMG,
SHIPFROM_IND LIKE J_1IEXCHDR-STATUS,
RG23D_SERIALNO LIKE J_1IEXCHDR-STATUS.
DATA : BEGIN OF XLIPS OCCURS 10,
internal table to store the delivery item information
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
MATNR LIKE LIPS-MATNR,
MAKTX LIKE MAKT-MAKTX,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
CHARG LIKE LIPS-CHARG,
LFIMG LIKE LIPS-LFIMG,
MEINS LIKE LIPS-MEINS,
BED LIKE J_1IRG23D-EXBED,
SED LIKE J_1IRG23D-EXSED,
AED LIKE J_1IRG23D-EXAED,
CUR LIKE J_1IRG23D-EXCUR,
SELFLAG TYPE C , "T=excise invoice selected
INDEX LIKE SY-TABIX, "index in the table
FLG TYPE C. "item selection
DATA : END OF XLIPS.
DATA : CRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains all rg23d entries for the document
DATA : LRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains item rg23d entries
DATA : BEGIN OF Z_1IRG23D OCCURS 30.
stores the data to be updated
INCLUDE STRUCTURE J_1IRG23D.
DATA : END OF Z_1IRG23D.
DATA : BEGIN OF EXCINV OCCURS 30.
factory inovoics selected for item
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF EXCINV.
DATA : BEGIN OF ASSIGNED_EXCINV OCCURS 30.
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF ASSIGNED_EXCINV.
DATA : A_INDEX LIKE SYST-TABIX.
DATA : BEGIN OF LOCK_TABLE OCCURS 10,
table containing plant-material combination and status of the lock
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
STATUS TYPE C, "LOCKED/UNLOCKED
END OF LOCK_TABLE.
DATA : BEGIN OF LOCKTAB OCCURS 0,
TRNTYP LIKE J_1IEXCDTL-TRNTYP,
DOCNO LIKE J_1IEXCDTL-DOCNO,
DOCYR LIKE J_1IEXCDTL-DOCYR,
ZEILE LIKE J_1IEXCDTL-ZEILE,
END OF LOCKTAB.
DATA :
CRG23D-CTR TYPE I, "Line count of crg23d table
SHIPFROM LIKE J_1IRG23D-SHIPFROM,
FOLIO LIKE J_1IRG23D-FOLIO,
SERIALNO LIKE J_1IRG23D-SERIALNO,
DEPEXNUM LIKE J_1IRG23D-DEPEXNUM,
DEPEXYEAR LIKE J_1IRG23D-DEPEXYEAR.
CONSTANTS :
BED LIKE CONDT-NAME VALUE 'BED',
AED LIKE CONDT-NAME VALUE 'AED',
SED LIKE CONDT-NAME VALUE 'SED',
CES LIKE CONDT-NAME VALUE 'CES',
LOCKED TYPE C VALUE '1',
UNLOCKED TYPE C VALUE '2'.
AT SELECTION-SCREEN.
PERFORM CHECK_VBELN_INPUT.
IF FCODE = 'S'.
PERFORM DELIVERY_START_USER_EXIT.
PERFORM READ_DELIVERY_HEADER.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM RG23D_SELECTION.
PERFORM SAVE_DOCUMENT.
MESSAGE I000 WITH 'Selection Complete for Delivery ' DELIVERY.
ELSEIF FCODE = 'V'.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM UPDATE_DOCUMENT.
MESSAGE I000 WITH 'Verfiy/Post Complete for Delivery ' DELIVERY.
ENDIF.
FORM CHECK_VBELN_INPUT.
Validate Function Code
IF NOT ( FCODE = 'S' OR FCODE = 'V' ).
MESSAGE E000 WITH 'Valid Functions are S/V - Select/Verify Post'.
ENDIF.
IF DELIVERY IS INITIAL.
MESSAGE E000 WITH 'Delivery number cannot be initial'.
ENDIF.
check if goods issue done for the delivery
SELECT SINGLE WBSTK INTO VBUK-WBSTK
FROM VBUK
WHERE VBELN = DELIVERY.
IF SY-SUBRC = 0.
IF VBUK-WBSTK <> 'C' AND FCODE = 'V'.
MESSAGE W339 WITH DELIVERY.
ENDIF.
ELSE.
MESSAGE E000 WITH 'Invalid Delivery'.
ENDIF.
if in select mode check if excise invoice already selected for delive
SELECT SINGLE * FROM J_1IRG23D
WHERE VBELN = DELIVERY.
IF FCODE = 'S'.
IF SY-SUBRC = 0.
MESSAGE E325 WITH DELIVERY.
ENDIF.
ELSEIF FCODE = 'V'.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Selection not over for ' DELIVERY.
ELSEIF J_1IRG23D-STATUS = 'P'.
MESSAGE E000 WITH 'Record Already Posted '.
ENDIF.
ENDIF.
CLEAR J_1IRG23D.
ENDFORM. " CHECK_VBELN_INPUT
FORM READ_DELIVERY_HEADER.
SELECT SINGLE * FROM LIKP
WHERE VBELN = DELIVERY.
get the sold-to-party
CLEAR: KUAGV, KUWEV.
SELECT SINGLE KUNNR NAME1 LAND1
FROM KNA1 INTO (KUAGV-KUNNR,KUAGV-NAME1,KUAGV-LAND1)
WHERE KUNNR = LIKP-KUNAG.
get the ship-to-party
SELECT SINGLE KUNNR LAND1 NAME1
FROM KNA1 INTO (KUWEV-KUNNR,KUWEV-LAND1,KUWEV-NAME1)
WHERE KUNNR = LIKP-KUNNR.
ENDFORM. " READ_DELIVERY_HEADER
FORM GET_COMP_CODE.
get the company code of the document from the sales organisation
CLEAR TVKO-BUKRS.
SELECT SINGLE BUKRS FROM TVKO INTO TVKO-BUKRS
WHERE VKORG = LIKP-VKORG.
J1IJ300-BUKRS = TVKO-BUKRS.
SELECT SINGLE WAERS FROM T001 INTO J1IJ300-WAERS
WHERE BUKRS = J1IJ300-BUKRS.
ENDFORM. " GET_COMP_CODE
FORM READ_CUSTOMISATION.
SELECT SINGLE WERKS INTO J1IJ300-WERKS
FROM LIPS
WHERE VBELN = DELIVERY.
Plant level customisation
SELECT SINGLE * FROM J_1IWRKCUS
WHERE J_1IWERKS = J1IJ300-WERKS .
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' J1IJ300-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IDEPOT IS INITIAL.
plant is defined as factory
MESSAGE E322 WITH J1IJ300-WERKS.
ENDIF.
J1IJ300-REGID = J_1IWRKCUS-J_1IREGID.
TRNTYP = 'DLDO'.
SELECT SINGLE * FROM J_1IREGSET
WHERE J_1IREGID = J1IJ300-REGID.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'Register id' J1IJ300-REGID 'J_1IREGSET'.
ENDIF.
ENDFORM. " READ_CUSTOMISATION
*& Form GET_ITEM_INFO
text *
--> p1 text
<-- p2 text
FORM GET_ITEM_INFO.
REFRESH : CRG23D, LRG23D, EXCINV, XLIPS.
PERFORM READ_DELIVERY_ITEM.
ENDFORM. " GET_ITEM_INFO
*& Form READ_DELIVERY_ITEM
text *
--> p1 text
<-- p2 text
FORM READ_DELIVERY_ITEM.
DATA : CNT LIKE SY-TABIX.
CLEAR CNT.
REFRESH XLIPS.
SELECT * FROM LIPS
WHERE VBELN = DELIVERY.
read the delivery item
perform plant checking only if in create mode
IF LIPS-WERKS <> J1IJ300-WERKS.
plant is different from that of the first item
SELECT SINGLE J_1IREGID INTO J_1IWRKCUS-J_1IREGID
FROM J_1IWRKCUS
WHERE J_1IWERKS = LIPS-WERKS.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' LIPS-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IREGID <> J1IJ300-REGID.
register id of the two plants are different
MESSAGE E338 WITH DELIVERY.
ENDIF.
ENDIF.
CLEAR XLIPS.
store the item details
XLIPS-VBELN = LIPS-VBELN.
XLIPS-POSNR = LIPS-POSNR.
XLIPS-MATNR = LIPS-MATNR.
PERFORM GET_MATERIAL_DESC
USING XLIPS-MATNR
XLIPS-MAKTX.
XLIPS-WERKS = LIPS-WERKS.
XLIPS-LGORT = LIPS-LGORT.
XLIPS-CHARG = LIPS-CHARG.
XLIPS-LFIMG = LIPS-LFIMG.
XLIPS-MEINS = LIPS-VRKME. "changed 2.3.98
CLEAR : XLIPS-BED, XLIPS-SED, XLIPS-AED.
XLIPS-CUR = J1IJ300-BUKRS.
CNT = CNT + 1.
XLIPS-INDEX = CNT.
XLIPS-SELFLAG = 'F'.
APPEND XLIPS.
ENDSELECT.
ENDFORM. " READ_DELIVERY_ITEM
*& Form GET_MATERIAL_DESC
text *
--> p1 text
<-- p2 text
FORM GET_MATERIAL_DESC USING MATNR MAKTX.
SELECT SINGLE MAKTX FROM MAKT INTO MAKTX
WHERE MATNR = MATNR
AND SPRAS = 'E' .
ENDFORM. " GET_MATERIAL_DESC
*& Form LOCKING
text *
--> p1 text
<-- p2 text
FORM LOCKING.
REFRESH LOCK_TABLE.
LOOP AT XLIPS.
LOCK_TABLE-WERKS = XLIPS-WERKS.
LOCK_TABLE-MATNR = XLIPS-MATNR.
LOCK_TABLE-STATUS = UNLOCKED.
COLLECT LOCK_TABLE.
ENDLOOP.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING LOCKED.
SELECT TRNTYP DOCNO DOCYR ZEILE INTO
(LOCKTAB-TRNTYP,
LOCKTAB-DOCNO,LOCKTAB-DOCYR,
LOCKTAB-ZEILE)
FROM J_1IEXCDTL
WHERE TRNTYP = 'GRPO'
AND WERKS = XLIPS-WERKS
AND LGORT = XLIPS-LGORT
AND MATNR = XLIPS-MATNR
AND CHARG = XLIPS-CHARG.
APPEND LOCKTAB.
ENDSELECT.
*share lock for all excise invoices
LOOP AT LOCKTAB.
CALL FUNCTION 'ENQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
ENDLOOP.
ENDFORM. " LOCKING
*& Form LOCK_UNLOCK_PLANT_MATERIAL
text *
--> p1 text
<-- p2 text
FORM LOCK_UNLOCK_PLANT_MATERIAL USING ACTION.
DATA: __UNAME LIKE SY-UNAME,
__OBJECT LIKE DD25V-VIEWNAME.
DATA : BEGIN OF LOCK_STRUCT,
GRANNAME(10) VALUE 'J1IJ',
ENQMODE VALUE 'E',
MANDT LIKE SY-MANDT,
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
END OF LOCK_STRUCT.
LOCK_STRUCT-MANDT = SY-MANDT.
LOOP AT LOCK_TABLE WHERE STATUS <> ACTION.
perform the locking/unlocking operation only for the items for which
it is not already done
LOCK_STRUCT-WERKS = LOCK_TABLE-WERKS.
LOCK_STRUCT-MATNR = LOCK_TABLE-MATNR.
CALL 'C_ENQUEUE'
ID 'OPCODE' FIELD ACTION
ID 'ENQOBJ' FIELD 'J_1IJ'
ID '01' FIELD LOCK_STRUCT
ID 'COLLISION_UNAME' FIELD __UNAME
ID 'COLLISION_OBJECT' FIELD __OBJECT.
CASE SY-SUBRC.
WHEN 0.
LOCK_TABLE-STATUS = ACTION.
MODIFY LOCK_TABLE.
WHEN 2.
MESSAGE E341 WITH LOCK_TABLE-WERKS LOCK_TABLE-MATNR __UNAME.
WHEN OTHERS.
IF ACTION = LOCKED.
MESSAGE E342 WITH 'locking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ELSE.
MESSAGE E342 WITH 'unlocking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ENDIF.
ENDCASE.
ENDLOOP.
ENDFORM. " LOCK_UNLOCK_PLANT_MATERIAL
*& Form RG23D_SELECTION
text *
--> p1 text
<-- p2 text
FORM RG23D_SELECTION.
REFRESH CRG23D.
REFRESH ASSIGNED_EXCINV.
LOOP AT XLIPS.
*write: / xlips-vbeln,xlips-posnr,xlips-matnr, xlips-meins, xlips-lfimg.
REFRESH EXCINV.
CALL FUNCTION 'J_1I6_SELECT_EXCISE_INVOICE_DE'
EXPORTING
BUKRS = J1IJ300-BUKRS
CHARG = XLIPS-CHARG
WERKS = XLIPS-WERKS
EXGRP = EXCGROUP
MATNR = XLIPS-MATNR
QTY_CHECK = 'X'
MULTI = 'X'
NO_DAY_CHECK = 'X'
SHIPFROM = SHIPFROM
LGORT = XLIPS-LGORT
TABLES
EXC_TAB = EXCINV
EXCEPTIONS
OTHERS = 1.
TOTAL_LRG23D = 0.
ALLOC_LRG23D = 0.
SORT EXCINV BY DOCYR DOCNO .
LOOP AT ASSIGNED_EXCINV.
READ TABLE EXCINV WITH KEY DOCYR = ASSIGNED_EXCINV-DOCYR
DOCNO = ASSIGNED_EXCINV-DOCNO
ZEILE = ASSIGNED_EXCINV-ZEILE
BINARY SEARCH.
IF SY-SUBRC = 0.
A_INDEX = SY-TABIX.
EXCINV-MENGR = EXCINV-MENGR - ASSIGNED_EXCINV-MENGR.
MODIFY EXCINV INDEX A_INDEX .
ENDIF.
ENDLOOP.
DELETE EXCINV WHERE MENGR = 0.
total_lrg23d = total balance quantity in the selected excise invoices
alloc_lrg23d = Quantity allocated to a delivery line item,
Allocation continues till
- We have balance quantity in excise invoice selection
- Till total delivery quantity is allocated
LOOP AT EXCINV.
To Force the same shipfrom for all the excise invoices
Shipfrom Ind can be determined in the start user-exit
IF J1IJ300-SHIPFROM_IND = 'Y'.
IF XLIPS-INDEX = 1 AND SY-TABIX = 1.
SHIPFROM = EXCINV-SHIPFROM.
ENDIF.
IF SHIPFROM NE EXCINV-SHIPFROM.
EXCINV-RIND3 = 'X'.
MODIFY EXCINV.
CONTINUE.
ENDIF.
ENDIF.
Allocation
IF XLIPS-LFIMG NE ALLOC_LRG23D.
TOTAL_LRG23D = TOTAL_LRG23D + EXCINV-MENGR.
IF XLIPS-LFIMG > TOTAL_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ELSE.
EXCINV-MENGR = XLIPS-LFIMG - ALLOC_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ENDIF.
ELSE.
EXCINV-RIND3 = 'X'.
ENDIF.
MODIFY EXCINV.
ENDLOOP.
DELETE EXCINV WHERE RIND3 = 'X'.
LOOP AT EXCINV.
MOVE-CORRESPONDING EXCINV TO ASSIGNED_EXCINV.
APPEND ASSIGNED_EXCINV.
CLEAR ASSIGNED_EXCINV.
ENDLOOP.
IF TOTAL_LRG23D < XLIPS-LFIMG.
MESSAGE E000 WITH 'Not enough balance in RG23D ......'.
ENDIF.
Collect all allocated excise invoices to crg23d table
LOOP AT EXCINV.
PERFORM FILL_CRG23D.
APPEND CRG23D.
ENDLOOP.
ENDLOOP.
ENDFORM. " RG23D_SELECTION
*& Form SAVE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM SAVE_DOCUMENT.
PERFORM PREPARE_RG23D_DATA.
Generate RG23D serial number and Excise Invoice Serial Number
IF J1IJ300-RG23D_SERIALNO = 'Y'.
PERFORM GENERATE_RG23D_SERIAL ON COMMIT.
ENDIF.
PERFORM GENERATE_EXCISE_INV_SERIAL ON COMMIT.
CALL FUNCTION 'J_1I7_USEREXIT_DEPOT_BEF_SAVE'
TABLES
RG23D = Z_1IRG23D
EXCEPTIONS
OTHERS = 1.
PERFORM UPDATE_RG23D ON COMMIT.
PERFORM UPDATE_EXCDTL ON COMMIT.
COMMIT WORK.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING UNLOCKED.
PERFORM UNLOCKING.
MESSAGE S333 WITH DELIVERY.
ENDFORM. " SAVE_DOCUMENT
*& Form PREPARE_RG23D_DATA
text *
--> p1 text
<-- p2 text
FORM PREPARE_RG23D_DATA.
REFRESH Z_1IRG23D.
LOOP AT CRG23D WHERE MENGE <> 0.
CLEAR Z_1IRG23D.
Z_1IRG23D = CRG23D.
Z_1IRG23D-USNAM = SY-UNAME.
Z_1IRG23D-CPUDT = SY-DATUM.
Z_1IRG23D-EXGRP = EXCGROUP.
Z_1IRG23D-SRGRP = SERGROUP.
APPEND Z_1IRG23D.
IF CRG23D-ADDAED <> 0 OR CRG23D-ADDSED <> 0 OR CRG23D-ADDAED <> 0 .
additional excise is applicable
make quantity zero for A certificate entries
CLEAR : Z_1IRG23D-MENGE.
get all the A certificates for the excise document item
SELECT * FROM J_1IEXCDTL
TODO : add the transaction type to the selection procedure
WHERE RDOC1 = CRG23D-DOCNO
AND RYEAR1 = CRG23D-DOCYR
AND RITEM1 = CRG23D-ZEILE
AND RIND1 = 'G'.
get the A certificate number
SELECT SINGLE
EXNUM EXYEAR INTO (Z_1IRG23D-EXNUM, Z_1IRG23D-EXYEAR)
FROM J_1IEXCHDR
WHERE TRNTYP = J_1IEXCDTL-TRNTYP
AND DOCYR = J_1IEXCDTL-DOCYR
AND DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-TRNTYP = J_1IEXCDTL-TRNTYP.
Z_1IRG23D-DOCYR = J_1IEXCDTL-DOCYR.
Z_1IRG23D-DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-ZEILE = J_1IEXCDTL-ZEILE.
Z_1IRG23D-EXBED = ( J_1IEXCDTL-EXBED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXSED = ( J_1IEXCDTL-EXSED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXAED = ( J_1IEXCDTL-EXAED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-RG23ASER = J_1IEXCDTL-RG23ASER.
Z_1IRG23D-RG23CSER = J_1IEXCDTL-RG23CSER.
Z_1IRG23D-RGPLASER = J_1IEXCDTL-RGPLASER.
APPEND Z_1IRG23D.
ENDSELECT.
ENDIF.
ENDLOOP.
ENDFORM. " PREPARE_RG23D_DATA
*& Form UPDATE_RG23D
text *
--> p1 text
<-- p2 text
FORM UPDATE_RG23D.
*update the rg23d register
INSERT J_1IRG23D FROM TABLE Z_1IRG23D ACCEPTING DUPLICATE KEYS.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDFORM. " UPDATE_RG23D
*& Form UPDATE_EXCDTL
text *
--> p1 text
<-- p2 text
FORM UPDATE_EXCDTL.
LOOP AT CRG23D WHERE MENGE <> 0.
update the remaining quantity in the excise invoice item tables
UPDATE J_1IEXCDTL
SET MENGR = MENGR - CRG23D-MENGE
AENAM = SY-UNAME
AEDAT = SY-DATUM
WHERE TRNTYP = 'GRPO'
AND DOCYR = CRG23D-DOCYR
AND DOCNO = CRG23D-DOCNO
AND ZEILE = CRG23D-ZEILE.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_EXCDTL
*& Form FILL_CRG23D
text *
--> p1 text
<-- p2 text
FORM FILL_CRG23D.
CRG23D-TRNTYP = EXCINV-TRNTYP.
CRG23D-DOCYR = EXCINV-DOCYR.
CRG23D-DOCNO = EXCINV-DOCNO.
CRG23D-ZEILE = EXCINV-ZEILE.
CRG23D-VBELN = XLIPS-VBELN.
CRG23D-POSNR = XLIPS-POSNR.
CRG23D-EXNUM = EXCINV-EXNUM.
CRG23D-EXYEAR = EXCINV-EXYEAR.
CRG23D-LIFNR = EXCINV-LIFNR.
CRG23D-MATNR = EXCINV-MATNR.
CRG23D-MAKTX = EXCINV-MAKTX.
CRG23D-CHAPID = EXCINV-CHAPID.
CRG23D-MEINS = EXCINV-MENGR_UOM.
CRG23D-WERKS = EXCINV-WERKS.
CRG23D-EXCUR = EXCINV-EXCUR.
CRG23D-RG23ASER = EXCINV-RG23ASER.
CRG23D-RG23CSER = EXCINV-RG23CSER.
CRG23D-RGPLASER = EXCINV-RGPLASER.
CRG23D-MENGR = EXCINV-MENGR.
CRG23D-MENGA = EXCINV-MENGA.
CRG23D-MENGE = EXCINV-MENGR. " Move the allocated Qty
CRG23D-EXBED = ( EXCINV-EXBED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXSED = ( EXCINV-EXSED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXAED = ( EXCINV-EXAED * CRG23D-MENGE ) / EXCINV-MENGA.
ENDFORM. " FILL_CRG23D
*& Form UPDATE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM UPDATE_DOCUMENT.
LOOP AT XLIPS.
UPDATE J_1IRG23D SET STATUS = 'P'
WHERE VBELN = XLIPS-VBELN
AND POSNR = XLIPS-POSNR.
ENDLOOP.
COMMIT WORK.
ENDFORM. " UPDATE_DOCUMENT
*& Form DELIVERY_START_USER_EXIT
text *
--> p1 text
<-- p2 text
FORM DELIVERY_START_USER_EXIT.
CALL FUNCTION 'J_1I7_USEREXIT_EXGRP_DETERM'
EXPORTING
EXCGRP = EXCGROUP
MBLNR =
MJAHR =
VENDOR =
VBELN = DELIVERY
IMPORTING
EXCGRP = EXCGROUP
SHIPFROM_IND = J1IJ300-SHIPFROM_IND
RG23D_SERIALNO = J1IJ300-RG23D_SERIALNO
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'J_1I7_USEREXIT_SERGRP_DETERM'
EXPORTING
SRGRP = SERGROUP
MBLNR =
MJAHR =
VBELN = DELIVERY
IMPORTING
SRGRP = SERGROUP
EXCEPTIONS
OTHERS = 1.
ENDFORM. " DELIVERY_START_USER_EXIT
*& Form GENERATE_RG23D_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_RG23D_SERIAL.
LOOP AT Z_1IRG23D WHERE MENGE <> 0.
CLEAR: FOLIO, SERIALNO.
SELECT MAX( FOLIO ) MAX( SERIALNO )
INTO (Z_1IRG23D-FOLIO, Z_1IRG23D-SERIALNO)
FROM J_1IRG23D
WHERE TRNTYP = Z_1IRG23D-TRNTYP
AND DOCNO = Z_1IRG23D-DOCNO
AND DOCYR = Z_1IRG23D-DOCYR
AND ZEILE = Z_1IRG23D-ZEILE.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_RG23D_SERIAL
*& Form GENERATE_EXCISE_INV_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_EXCISE_INV_SERIAL.
CLEAR: DEPEXNUM, DEPEXYEAR.
CALL FUNCTION 'J_1I6_DETERMINE_EXC_YEAR'
EXPORTING
I_BUKRS = J1IJ300-BUKRS
IMPORTING
EXCISE_YEAR = DEPEXYEAR
EXCEPTIONS
MISS_COMPANY = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E526 WITH 'Company ' J1IJ300-BUKRS.
ENDIF.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'J_1IDEPINV'
QUANTITY = '1'
SUBOBJECT = SERGROUP
TOYEAR = DEPEXYEAR
IMPORTING
NUMBER = DEPEXNUM
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
OTHERS = 7.
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
MESSAGE A336 WITH 'internal document' ': Interval not found'
'. Number object : J_1IDEPINV'.
WHEN 3.
MESSAGE A336 WITH 'internal document' ': Object not found'
'. Number object : J_1IDEPINV'.
WHEN OTHERS.
MESSAGE A336 WITH 'internal document'
'. Number object : J_1IDEPINV'.
ENDCASE.
Update Depot Excise Invoice Year and Number in the table
LOOP AT Z_1IRG23D.
Z_1IRG23D-SERIALNO = Z_1IRG23D-SERIALNO + 1.
Z_1IRG23D-DEPEXYEAR = DEPEXYEAR.
Z_1IRG23D-DEPEXNUM = DEPEXNUM.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_EXCISE_INV_SERIAL
*& Form UNLOCKING
text
--> p1 text
<-- p2 text
FORM UNLOCKING.
LOOP AT LOCKTAB.
CALL FUNCTION 'DEQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE.
ENDLOOP.
ENDFORM. " UNLOCKING -
Print Module templates layouts do not update on the fly
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem. -
Data is not updated in the database
hi.. to all..
i'm using the following code ...... but the data is not updated in the database.. the output window get closed as soon as i clicked save button...
i don't know wat's problem with the program...
Plz help me.. to get resolve this problem..
import java.applet.*;
import java.awt.*;
import java.sql.*;
import java.awt.event.*;
import sun.jdbc.odbc.*;
public class Customerdetails extends Frame implements ActionListener
TextField ccod,cname,add,phno,conp,email,fax;
Label l1,l2,l3,l4,l5,l6,l7;
Button save,exit;
Connection con;
ResultSet rs;
Statement stmt;
String s1,s2,s3,s4,s5,s6,s7;
public Customerdetails()
super("CustomerDetails");
setSize(700,750);
setLayout(null);
setBackground(new java.awt.Color(245, 117, 105));
l1=new Label("Customercode");
l2=new Label("CompanyName");
l3=new Label("Address");
l4=new Label("PhoneNumber");
l5=new Label("Contact person");
l6=new Label("EmailAddress");
l7=new Label("FaxNumber");
l1.setBounds(20,100,100,70);
l2.setBounds(20,180,100,70);
l3.setBounds(20,270,100,70);
l4.setBounds(20,340,100,70);
l5.setBounds(20,420,100,70);
l6.setBounds(20,500,100,70);
l7.setBounds(20,580,100,70);
ccod=new TextField();
cname=new TextField();
add=new TextField();
phno=new TextField();
conp=new TextField();
email=new TextField();
fax=new TextField();
ccod.setBounds(200,120,150,50);
cname.setBounds(200,200,150,50);
add.setBounds(200,280,150,50);
phno.setBounds(200,360,150,50);
conp.setBounds(200,440,150,50);
email.setBounds(200,520,150,50);
fax.setBounds(200,600,150,50);
Button save= new Button("Save");
Button exit= new Button("Exit");
save.setBounds(200,680,100,40);
exit.setBounds(350,680,100,40);
add(l1);
add(ccod);
add(l2);
add(cname);
add(l3);
add(add);
add(l4);
add(phno);
add(l5);
add(conp);
add(l6);
add(email);
add(l7);
add(fax);
add(save);
add(exit);
save.addActionListener(this);
exit.addActionListener(this);
setVisible(true);
addWindowListener(new WindowAdapter(){
public void WindowClosing(WindowEvent w) {System.exit(0);}});
public void actionPerformed(ActionEvent ae)
Customerdetails cud= new Customerdetails();
if(ae.getSource()==save)
s1=ccod.getText();
s2=cname.getText();
s3=add.getText();
s4=phno.getText();
s5=conp.getText();
s6=email.getText();
s7=fax.getText();
try
String query = "insert into Customerdetails (Customercode,CompanyName,Address,PhoneNumber,Contact person,EmailAddress,FaxNumber)"+ "values('"+s1+"','"+s2+"','"+s3+"','"+s4+"','"+s5+"','"+s6+"','"+s7+"')";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:prism");
stmt=con.createStatement();
rs=stmt.executeQuery(query);
stmt.close();
catch(ClassNotFoundException e)
System.out.println(e);
catch(SQLException e)
System.out.println(e);
else if(ae.getSource()==exit)
System.exit(0);
else
System.exit(0);
public static void main(String args[])
Customerdetails cud= new Customerdetails();
}This doesn't look right:
,FaxNumber)"+ "values(because it's equal to ,FaxNumber)values(and your SQL server won't understand it, put a whitespace between.
/M -
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling -
Hi,
I have created an append on the tables RBKP_V and RBKP.
I am parking a vendor invoice in transaction MIR7.
I'm using the BADI BADI_FDCB_SUBBAS04 to enhance MIR7 transaction. I have followed the BADI documentation.
When I click on 'Save as completed' button :
The customer fields are not updated in the table RBKP.
Whats the solution ?
Best Regards,
Ramesh.SHi, In my opinion, some of Custom fields should move to corresponding field in user exit to update to table.
Example . you have add a field that zzabb into vbak , you should add code like move struct-zzabb to xvbak-zzabb.
**"struct" is from screen field you be inputed -
Data Migration Opening Balances are not updating in the Report F.08
Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
KishoreHi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore -
Roles are not updating in the GRC 10.0 System.
Hi
We had created Z role in ECC system and Ran the Sync Jobs in the GRC 10.0 System .
But the role created in backend System(ECC) was not updating in the roles of the GRC system.
Can any one provide right solution.
ThanksHi Wipro Basis Team
On running the sync job what are you expecting to occur when you say the roles are not updating in GRC System? I wonder if you are expecting a different outcome to the purpose of the sync jobs.
Regards
Colleen -
Sp L records are coming to the PSA and not updating in the data target
Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps... -
My contacts are not updating from the iCloud. How can I actively go and retrieve them?
My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?
Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud
Hi Gorm019,
If you are having issues with Photo Stream, you may find the following articles helpful:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Regards,
- Brenden -
TS3276 Yahoo! sent mail not updated in the server.
I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
I don't this issue with exchange and gmail.
ThanksRight that is how the POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.
-
PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins
Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
Anyway thanks again -
iphoto 9.5 won't import photos from iPhoto 7.5. Library will not update using the iPhoto library upgrader application. Repeatedly says it can't locate photos even when told to cancel. I think the photos in question are in Nikon RAW format.
iPhoto 9.5 immediately tries to "upgrade" my library using the upgrader.
iPhoto 9.5 asks you to run the upgrader to prepare the library for 9.5. It then will update the library to its format.
You need to do the following:
1 - go to your Applications/Utilities folder and double click on the iPhoto Library Upgrader 1.1 application.
2 - select Choose Library, navigate to your iPhoto library, select it and let the upgrader do its thing.
3 - launch iPhoto 9.5 to open and finish the conversion of the library.
OT -
Ancient Aliens is not updating. The new shows in season 6 are not showing up. Please advise
Sorry about that... Thanks in advance for your help
Actually Itunes has now started picking up all the shows again. But I would still like to know why we had the issue. Any ideas? Thanks
In itunes http://itunes.apple.com/us/podcast/cycling-360-media/id431852609
Feedburner feed pointing to itunes http://feeds.feedburner.com/Cycling360
Feed pointing to feedburner http://www.cycling360media.com/?feed=rss2
Maybe you are looking for
-
My iphone 4 is broken can I get a replacement
Hello Apple , My iPhone 4 is really in bad shape can I get a replacement even though I haven't paid my bill <Email Edited by Host>
-
InDesign PDF export to network server becomes invisible
Hi, Just upgraded to InDesign CS5. When I export a PDF document and post onto network server, it becomes invisible. I only know this because when I export onto my desktop and then drag into the network folder, it gives me an error message that it can
-
User exit with transaction MB*
hi guru. i have a question with user exit. after read in other topic i still need explanation from other. my scenario is. whenever user use sap and system generate material document no. . i want system write this mat. doc. no. into text file and stor
-
What are people using on wireless networks that have VLAN's for voice and data to provide Layer 3 roaming funcionality. Need wireless voice users to be able to roam across subnets seemlessly. Layer 2 works great but scalling to 2000 users. Need a Lay
-
Communication error with external system ( VERTEX )
Hi Folks, While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document. Please