Organization Hierarchy related setup for Item Organization Assignment prog

Hi,
Could someone please help us with this..we have a Master org M1 , a child org C1 already existing and has items already assigned to it.
Now we have created a new org :C2 with the Master org still as M1. Now we want to assign all the items currently assigned to C1 to this newly created org C2.
Hierarchy Definition :
1. In the Organization C1 (after changing org) we give the name to a new Hierarchy : Test Hierarchy, set the version as 1, with the start date against it.
Then in the Organization block search for the NAME field as C1 org name..this comes as well.
Then in the Sub Ordinates section , we enter the name as C2 (This is the org to which we need to assign all the items currently assigned to C1 org)
Then we save this Test Hierarchy definition.
Item Organization Assignment program
2. Running the Item Organization Assignment program : Here we change the org to C1 first (source org), then sub mit the program . Parameters :
Source org : C1 org name
Hierarchy Origin : C1 org name (since this is my starting org or the sourcing org from where i need to assign my items)
Hierarchy : Now here the issue is happening as we are not getting the Test Hierarchy which we have created above in the options to choose from...
Since we had created the Test Hierarchy in the C1 org , we should have got this hierarchy name to show up in this parameter..
Could someone please help as to what could be the issue...we are stuck because of this.
Thanks

Sir,
For this program the two value sets used are
INV_ITEMASSIGN_HIER_ORIGIN (this is C1 for u)
INV_ITEMASSIGN_HIER_WITH_SRC (this is not showing the expected value) this is dependent value sent and is checking that INV_ORGHIERARCHY_PVT is contained in the previous value set.
Can you please confirm that the responsibility from which you are running the request has the C2 organization access?
Thanks
Karthik.

Similar Messages

Custom WEB ADI for Item Category Assignment

Hello,
We created following custom WEB ADI .
1.) Item Update ( No Security )
2.) Item category assignment ( WITH Security of Organization Access )
Created custom responsibility XX_INVENTORY with custom Menu (subset of INV_NAVIGATE)
Added responsibility/organizationsfor XX_INVENTORY using organization access form.
NOW
POINT 1: Both ADI works as expected when added as function to Standard Inventory responsibility with menu INV_NAVIGATE.
POINT 2: Item Update ( with No Security) Works fine from custom responsibility
POINT 3: Item category assignment (with organization security) fails with "invalid integration key" error from custom responsibility. But if the user has "System Administrator" responsibility to his account it works fine, which makes me think that it has to do something with custom responsibility.
Applicatio: R12.1.3
Excel 2010
BNE Allow No Security Rule to Yes at user level
Any help is appreciated.
Thanks

Hussein,
Still the same even after bouncing application. But if application bouncing was issue then none of the custom ADI should have worked from custom application. But ONLY ONE of the two is not working. Item update ADI is working just fine but Item Category assignment is not.
Any more clues??
I tried by adding Create Document, adding Desktop Integration menu to custom responsibility menu, nothing works. As soon as I add "System Administrator" responsibility to User OR add the custom ADI function to standard inventory responsibility with INV_NAVIGATE menu, it works.
Please let me know if anybody has any clue on this issue.
Thanks

Order-related billing for item category TAN

Hi All,
How can I make item category TAN order related-billing document?
I already changed the settings for TAN:
Billing Relevance - B (Relevant for order-related billing)
And maintained the copy control between sales document and billing document for item category TAN:
Copying requirements: 002 (Item/Order Related)
Data VBRK/VBRP: 001 (Invoice Split - Sample)
But when i create the billing document, it is still showing that the item is not relevant for billing.
Delivery document has already been created for this item. Am I missing something?
Thanks,
Olyn

hi,
pl enter the billing doc type in the field for order related billing in the sales order document type overview.
2. there might be billing block at sales document header level or u might have checked billing block at item category TAN,
CHEERS

Early Warning System setup for items below Reorder Point

Hello,
I am looking for information regarding the EWS for items falling below Reorder Point. It is my understanding this can be setup with an email notification as well. My issue is my plant runs 24/7 and my maintenance crew on the weekends could benefit from receiving notifications in real time on items that need to be rebuilt which we may have in the repair room. this will give the Shift Supervisor a better idea of how to manage the repair of the machine. This will also help our overall purchasing practice in general.
Thank you for your time and attention!
Bill Lewis

Solved

Order related billing for item category

Hi Gurus,
Can you please suggest what option should I choose in Billing category for making it relevant for billing. ex c,f,g etc
It is the item for return and be used in credit memo with order related billing.
So flow is like this-
Return Order-Return Delivery-Credit Memo.
Thanks
Bawa

Hi there,
You should make order related billing only (here it means return order related).
Since you already determine a pricing proc for your returns, it will adopt the same billing.
Regards,
Sivanand

Delivery-related billing for TAS : take VPRS value from GR or Invoice

Hello,
One my customers currently invoices stock items and Third-Party Items separately. He now wishes to invoice both items together.
In Third-Party standard flow no delivery is needed. In order to invoice both items together I have now activated the delivery for the Third-Party item flow (item category TAS).
I can now invoice both items together based on the common delivery.
I have now another problem regarding the TAS item invoiced...
- In standard flow (third-party processing = order-related billing), the value for VPRS is taken from the MM flow (either from Goods Receipt or from vendor's invoice depending on the customizing) automatically. This is great since the vendor might enter a different cost than the one from the sales order and it is that cost that we need to find in the billing doc and in CO-PA.
- When I do delivery-related billing for my TAS item the VPRS is not updated from MM but is taken from Sales order (thus from material cost) --> incorrect value for my customers's need
I need to do delivery-related billing for item TAS with VPRS in billing doc (SD invoice) = value of MIGO or MIRO
Can anyone indicate me how to do this (user-exit? routine? ....)
Thank you
Regards,
Cynthia

Hi Cynthia,
Anyone, please correct me if i am wrong.
can we do like this for the given situation:
instead of changing TAS functionality, let us have billing relevance G (Order-related billing of the delivery quantity) in the item category for the stock items. so that you can bill both stock item and third party item in one billing document with reference to Order instead of delivery document.
you can have separate Item category for changing in SO for stock item whenever you want to club Third party item and Stock item for billing in the same document.
thanks
Rajam

MSS Organizational Assignment iView not displaying

Hi,
I'm using the MSS business package.
When navigating to Team - Employee Info - General Info, selecting an employee and clicking on the organizational assignment hyperlink, nothing happens. The Org Assignment iview does not popup.
However if I go into the other links under Team - Employee Info such as Personnel Development, and choose the same employee, the organizational assignment iview does start correctly.
I'm not sure where the problem lies here or what config controls this behaviour.
Any advise please.
Regards
Mr.T

Hey Mr. T,
First off, great name.
Secondly, and to address your issue, can you say whether or not you've attempted to move (copy/paste) any of the XSS content from the default location in the PCD to another location? Any content that might use OBN and/or relative paths to call secondary content items will NOT work properly if you start moving content around in the PCD. That's not to say it can't be done, but additional steps must be taken after you've moved this content. Please comment on the current location of your content in the PCD... was it moved at all?
Additionally, it may prove useful to captur an HTTP trace during the 'failure scenario' because you can often derive the target PCD location from the entries in that trace. HTTP Watch is a free tool that works well. There are others too, just Google-search for one. If possible, paste the last dozen or so lines of the trace into a reply here and we can try to see what exactly is being called and, hopefully, tell you why it's not rendering.
-Kevin

Authorization and moving employes to another organizational assignment

Hello! I have a big problem with authorization.
Lately some employes have been moved from one organizational assignment to another organizational assignment.
After moving I prepared the user and the role for this user he will be able to read infotype records for employes in the organizational assignment where they were moved.
And now I have big problem because this user can read data of employes in current organizational assignment and also data of these people in old organizational assignment, thought I didn't give him authorization for this old organizational assignment.
I checked view of table V_T582A and there in infotype 0001, 0007, 0008 in detailes the field: Access auth was checked, so I executed tests and this field was unchecked. But this test wasn't successfule.
In table T77S0 I have the following settings for AUTSW:
AUTSW     ADAYS            15
AUTSW     APPRO     0
AUTSW     NNNNN     0
AUTSW     ORGIN     1
AUTSW     ORGPD     0
AUTSW     ORGXX     0
AUTSW     PERNR     1
AUTSW     VACAU
I changed them but the tests also weren't successfule.
Please, help me, where the error can be?. Now I don't know
where I can look for the solving of this problem.
I my company we have the system:
46C
SAPKE46CB0
the latest note: LCP CE 74
Thank you very much if anyone helps me.

Hello Marta,
yes, the behaviour is corret. The old one can not see the new data but the new one the old. It's like a personal file where the new manager has access to and the old only knows what was entered up to the end of his responsibility.
This litle "picture" always helps me.
Please go to:
http://service.sap.com/erp-hcm
On the left side click:
Services for mySAP ERP HCM
- Special Documentation
In the document "Authorizations in mySAP HR (4.6C)" from page 70 chapter "4.4 Process of Time Logic" describes the behaviour in detail.
Hope to help,
Michael

Organizational assignment created via organizational Management

Hi All,
I am getting error message while deleting entry from IT 0001 - Organizational Assignment.
I have run the promotion action from 01.05.2010 and record in IT 0001 exists from 02.11.2010 which need to be deleted but am getting this error message.
Kindly advise the procedure to delete the record.
Regards,
Devendra.

Dear Devendra,
Please go to PA41 for change of actions.
if not possible thru
PA40 enter your date , select the same action again and execute it.. then you can get a buttons on the left top the screen....
change action & Change info group.
Clik on change action,, here it allows you to change the action date and....thru this you can change the date of org. assignment change also.
it help you out
try it.
thanking you,
Srinivas

Using Effective Dates on Organization Assignment on Contract Posting Terms

We are using ECC 5 and RE-FX
On our contracts the Posting Data Tab includes Term groups
-Postings
-Frequency
-Organizational Assignment
The Business Area associated with an Organizational Assignment needs to change (we are dropping an existing business area and rolling it into another).
Rather then going through all the contracts and changing teh business area to the new one (thus loosing history), I'd like to use the Valid From/To for the Org Assignment. So that there would be an entry from 01/01/2006 - 09/30/09 for Business Area 5600 and then a Valid From of 10/1/09 for Business area 5200.
I can do this. What seems to be missing, or not configured?, is having the multiple valid Org Assingments showing up in some reports (such as REISCN which shows only the first Org Assignment entry).
What can we do to implement the Org Assignment in such as was as to accommodate the change of business area, that does happen over the life of a business?
Thanks for your advice and suggestions!
Laurie McGinley

Then my cardinality is drastically reduced to 92K (actual 110M) - leading to Nested Loops further up the query plan....
I don't have histograms on the columns involvedIf you add histograms on the involved columns, is the optimizer picking up a better execution plan?
Also note that the problem might be that you need a combined value distribution on two columns. This is possible from 11g onwards, but not before. Check out http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-manage.html (Search for Multi-Column Statistics)

On Search of employee DOB in Organizational assignment

Hi,
On Search of employee first we go to PA30
Three tabs- 2 Organizational assignment
i want to add Employee Date Of Birth (DOB) in selection
Please advised
mhpo

hi i was just trying ur requirement.
goto se11.
click on search help radio button.create one starting from z like zbirthdate.select elementary search help.
give selection method as M_PREMN.search help exit as HRMC_PREM_EXIT_A.dialog type as dialog with value restriction.and hot key 1.in search help parameter give pernr lpo 3 spo 3.and gbdat lpo 6 and spo4.for pernr check export check box. and give data element persno.then go to PM-PA-basic settings ->maintain search help.go to include search help tab.add your search help here .then select that row and click on parameter assingnment give pernr and click on copy.then check and activate .u can see ur tab while selecting in pa30.
best regards.
Raj.
Edited by: Raj on Dec 8, 2008 5:52 PM

BAPI_PO_CREATE1 - In case of account assignment, please enter acc. assignment data for item

Hi,
Currently I'm facing an error "In case of account assignment, please enter acc. assignment data for item" when create a Purchase Order using BAPI_PO_CREATE1. The condition of the data that need to pump into the system is that this PO is an open item PO where does not require a metarial code for input, but it will pump in Short Text and Material Group. Other than that, the account assignment category is "K" and the item category is "9".
Below is the coding that I have implemented.
IF wa_temp_upr1-waers IS NOT INITIAL.
       MOVE wa_temp_upr1-waers TO wa_header-currency.
       wa_headerx-currency = abap_true.
     ENDIF.
     MOVE: wa_temp_upr1-lifnr TO wa_header-vendor,
           wa_temp_upr1-unsez TO wa_header-collect_no,
           wa_temp_upr1-bukrs TO wa_header-comp_code,
           sy-datum      TO wa_header-doc_date,
           sy-langu      TO wa_header-langu,
           'KTN1'        TO wa_header-purch_org,
           wa_temp_upr1-bkgrp TO wa_header-pur_group,
           wa_temp_upr1-zterm TO wa_header-pmnttrms.
     wa_headerx-collect_no = abap_true.
     wa_headerx-po_number = abap_true.
     wa_headerx-comp_code = abap_true.
     wa_headerx-vendor = abap_true.
     wa_headerx-doc_date = abap_true.
     wa_headerx-langu = abap_true.
     wa_headerx-purch_org = abap_true.
     wa_headerx-pur_group = abap_true.
     wa_headerx-pmnttrms = abap_true.
     IF wa_temp_upr1-meins IS NOT INITIAL.
       MOVE wa_temp_upr1-meins TO zunit_e.
       CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
         EXPORTING
           INPUT                = zunit_e
           LANGUAGE             = 'E'
         IMPORTING
           OUTPUT               = zunit_e.
       IF SY-SUBRC <> 0.
* Implement suitable error handling here
       ELSE.
         MOVE zunit_e TO wa_temp_upr1-meins.
       ENDIF.
       MODIFY it_upr1 FROM wa_temp_upr1.
     ENDIF.
     ADD 10 TO line_item.
     CALL FUNCTION 'NUMBER_GET_NEXT'
       EXPORTING
         NR_RANGE_NR = '01'
         OBJECT      = 'SERVICE'
       IMPORTING
         NUMBER      = pckg_no.
     IF SY-SUBRC <> 0.
* Implement suitable error handling here
     ENDIF.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
       EXPORTING
         INPUT = wa_temp_upr1-matnr
       IMPORTING
         OUTPUT = wa_po_item-material.
     MOVE: line_item TO wa_po_item-po_item,
           wa_temp_upr1-ewerks TO wa_po_item-plant,
           wa_temp_upr1-lgort TO wa_po_item-stge_loc,
           wa_temp_upr1-matnr TO wa_po_item-material,
           wa_temp_upr1-menge TO wa_po_item-quantity,
           wa_temp_upr1-peinh TO wa_po_item-price_unit,
           wa_temp_upr1-netpr TO wa_po_item-net_price,
           wa_temp_upr1-meins TO wa_po_item-po_unit,
           wa_temp_upr1-afnam TO wa_po_item-preq_name,
           wa_temp_upr1-eeind TO wa_po_item-price_date,
           ' ' TO wa_po_item-gr_ind,
           'X' TO wa_po_item-ir_ind,
           'X' TO wa_po_item-prnt_price,
           ' ' TO wa_po_item-distrib.
     wa_po_item-acctasscat = 'K'.
     MOVE pckg_no TO wa_po_item-pckg_no.
     wa_po_itemx-pckg_no = abap_true.
     IF wa_temp_upr1-bismt IS INITIAL.
       MOVE: wa_temp_upr1-short_text TO wa_po_item-short_text,
             wa_temp_upr1-matl_group TO wa_po_item-matl_group,
            '9' TO wa_po_item-item_cat.
       wa_po_itemx-short_text = abap_true.
       wa_po_itemx-matl_group = abap_true.
       wa_po_itemx-item_cat = abap_true.
       wa_potext-po_item = wa_po_item-po_item.
       wa_potext-text_id = 'F01'.
       APPEND wa_potext TO it_potext.
     ENDIF.
     MOVE wa_po_item-po_item TO wa_po_itemx-po_item.
     wa_po_itemx-plant = abap_true.
     wa_po_itemx-po_itemx = abap_true.
     wa_po_itemx-stge_loc = abap_true.
     IF wa_po_item-material IS NOT INITIAL.
       wa_po_itemx-material = abap_true.
     ENDIF.
     wa_po_itemx-quantity = abap_true.
     wa_po_itemx-price_unit = abap_true.
     wa_po_itemx-net_price = abap_true.
     wa_po_itemx-po_unit = abap_true.
     wa_po_itemx-preq_name = abap_true.
     wa_po_itemx-price_date = abap_true.
     wa_po_itemx-acctasscat = abap_true.
     wa_po_itemx-gr_ind = abap_true.
     wa_po_itemx-distrib = abap_true.
     wa_po_itemx-part_inv = abap_true.
     APPEND wa_po_item TO it_item.
     APPEND wa_po_itemx TO it_itemx.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
           INPUT = wa_temp_upr1-kostl
         IMPORTING
           OUTPUT = wa_temp_upr1-kostl.
       wa_account-costcenter = wa_temp_upr1-kostl.
       ADD 1 TO l_acc.
       ADD 10 TO v_po_item.
       MOVE v_po_item TO wa_account-po_item.
       MOVE '01' TO wa_account-serial_no.
       APPEND wa_account TO it_account.
       wa_accountx-costcenter = abap_true.
       MOVE v_po_item TO wa_accountx-po_item.
       MOVE '01' TO wa_accountx-serial_no.
       wa_accountx-SERIAL_NOX = abap_true.
       wa_accountx-po_itemx = abap_true.
       APPEND wa_accountx TO it_accountx.
*********** services
       wa_services-pckg_no = pckg_no.
       wa_services-line_no = '0000000001'.
       wa_services-outl_ind = 'X'.
       wa_services-subpckg_no = pckg_no + 1.
       wa_services-quantity = wa_temp_upr1-menge.
       wa_services-base_uom = wa_temp_upr1-meins.
       wa_services-price_unit = wa_temp_upr1-peinh.
       wa_services-gr_price = wa_temp_upr1-netpr.
       IF wa_temp_upr1-short_text IS NOT INITIAL.
         wa_services-short_text = wa_temp_upr1-short_text.
       ENDIF.
       APPEND wa_services TO it_services.
       CLEAR: wa_services,
               val_lin.
       wa_services-pckg_no = pckg_no + 1.
       wa_services-line_no = '0000000002'.
       wa_services-quantity = wa_temp_upr1-menge.
       wa_services-base_uom = wa_temp_upr1-meins.
       wa_services-price_unit = wa_temp_upr1-peinh.
       wa_services-gr_price = wa_temp_upr1-netpr.
       IF wa_temp_upr1-short_text IS NOT INITIAL.
         wa_services-short_text = 'SERVICE 1'.
       ENDIF.
       IF NOT wa_temp_upr1-matl_group IS INITIAL.
         wa_services-matl_group = wa_temp_upr1-matl_group.
       ENDIF.
       APPEND wa_services TO it_services.
************* service account assignment
       wa_services_acc-pckg_no = pckg_no + 1.
       wa_services_acc-line_no = '0000000002'.
       wa_services_acc-serno_line = '01'.
       wa_services_acc-quantity = wa_temp_upr1-menge.
       wa_services_acc-serial_no = '01'.
       wa_services_acc-net_value = wa_temp_upr1-netpr.
       APPEND wa_services_acc TO it_services_acc.
       CALL FUNCTION 'BAPI_PO_CREATE1'
         EXPORTING
           POHEADER          = wa_header
           POHEADERX         = wa_headerx
           TESTRUN           = pa_test
           NO_PRICE_FROM_PO = 'X'
         IMPORTING
           EXPPURCHASEORDER = va_ebeln
           EXPHEADER         = wa_expheader
         TABLES
           RETURN            = it_return
           POITEM            = it_item
           POITEMX           = it_itemx
           POACCOUNT         = it_account
           POACCOUNTX        = it_accountx
           POSERVICES        = it_services
           POSRVACCESSVALUES = it_services_acc
           POTEXTITEM        = it_potext.
I have done some search regarding this error and try to implemented it, but still does not working.
example website that i found for this error is:
David Klein's Corner: SAP Purchase Order Creation Error via BAPI - "In case of account assignment, please enter acc…
PO Upload through BAPI_PO_CREATE1 - Problem in Service Item
Currently my system is using: SAP_APPL SAPKH60604
I am really stuck on this error. Hope you all can help me on this matter.
Thanks.

Hi,
Filling the service line have the problem,
while filling the services we must follow correct order,
Here You entering the new services, first manually create purchase order after that observe the table
'ESLL' and use the FM;-' MS_FETCH_SPEC_FOR_LIST' how the services are inserting after that you also follow the same order.
if service entries are created before the creation of the PO.
then follow as bellow....
SELECT * FROM esll INTO TABLE lt_esll WHERE packno = wa_tmp_spec-packno.
   IF sy-subrc = '0'.
     LOOP AT lt_esll.
       CLEAR : lt_poservices.
       lt_poservices-pckg_no    = lt_esll-packno .
       lt_poservices-line_no    = lt_esll-introw .
       lt_poservices-ext_line   = lt_esll-extrow .
       lt_poservices-outl_level = lt_esll-rang .
       lt_poservices-outl_no    = lt_esll-extgroup .
       lt_poservices-outl_ind   = lt_esll-del .
       lt_poservices-subpckg_no = lt_esll-sub_packno .
       lt_poservices-service    = lt_esll-srvpos .
       lt_poservices-edition    = lt_esll-ausgb .
       lt_poservices-ssc_item   = lt_esll-stlvpos .
       lt_poservices-ext_serv   = lt_esll-extsrvno.
       lt_poservices-quantity   = lt_esll-menge .
       lt_poservices-base_uom   = lt_esll-meins .
       lt_poservices-ovf_tol    = lt_esll-uebto .
       lt_poservices-ovf_unlim = lt_esll-uebtk .
       lt_poservices-gr_price   = lt_esll-tbtwr .
       lt_poservices-from_line = lt_esll-frompos .
       lt_poservices-to_line    = lt_esll-knt_introw.
       lt_poservices-short_text = lt_esll-ktext1 .
       lt_poservices-distrib    = lt_esll-vrtkz .
       lt_poservices-pers_no    = lt_esll-pernr .
       lt_poservices-wagetype   = lt_esll-lgart .
       lt_poservices-con_pckg   = lt_esll-knt_packno.
       lt_poservices-con_line   = lt_esll-knt_introw .
       lt_poservices-matl_group = lt_esll-matkl .
       lt_poservices-taxjurcode = lt_esll-txjcd.
       lt_poservices-tax_code   = lt_esll-mwskz .
       lt_poservices-date       = lt_esll-sdate .
       APPEND lt_poservices TO lt_poservices[].
       CLEAR lt_esll.
     ENDLOOP.
   ENDIF.
   CALL FUNCTION 'MS_FETCH_SPEC_FOR_LIST'
     EXPORTING
       spec_packno            = wa_tmp_spec-packno
*     ONLINE_DATA            = ' '
* IMPORTING
*     LIMIT                  =
     TABLES
       servicetab             = lt_ml_esll1
*     LIMITTAB               =
     EXCEPTIONS
       no_specification_exist = 1
       OTHERS                 = 2.
   IF sy-subrc <> 0.
* Implement suitable error handling here
   ENDIF.
   LOOP AT lt_ml_esll1 INTO DATA(ls_ml_esll1).
     CLEAR : lt_poservices.
     lt_poservices-pckg_no    = ls_ml_esll1-packno .
     lt_poservices-line_no    = ls_ml_esll1-introw .
     lt_poservices-ext_line   = ls_ml_esll1-extrow .
     lt_poservices-outl_level = ls_ml_esll1-rang .
     lt_poservices-outl_no    = ls_ml_esll1-extgroup .
     lt_poservices-outl_ind   = ls_ml_esll1-del .
     lt_poservices-subpckg_no = ls_ml_esll1-sub_packno .
     lt_poservices-service    = ls_ml_esll1-srvpos .
     lt_poservices-edition    = ls_ml_esll1-ausgb .
     lt_poservices-ssc_item   = ls_ml_esll1-stlvpos .
     lt_poservices-ext_serv   = ls_ml_esll1-extsrvno.
     lt_poservices-quantity   = ls_ml_esll1-menge .
     lt_poservices-base_uom   = ls_ml_esll1-meins .
     lt_poservices-ovf_tol    = ls_ml_esll1-uebto .
     lt_poservices-ovf_unlim = ls_ml_esll1-uebtk .
     lt_poservices-gr_price   = ls_ml_esll1-tbtwr .
     lt_poservices-from_line = ls_ml_esll1-frompos .
     lt_poservices-to_line    = ls_ml_esll1-knt_introw.
     lt_poservices-short_text = ls_ml_esll1-ktext1 .
     lt_poservices-distrib    = ls_ml_esll1-vrtkz .
     lt_poservices-pers_no    = ls_ml_esll1-pernr .
     lt_poservices-wagetype   = ls_ml_esll1-lgart .
     lt_poservices-con_pckg   = ls_ml_esll1-knt_packno.
     lt_poservices-con_line   = ls_ml_esll1-knt_introw .
     lt_poservices-matl_group = ls_ml_esll1-matkl .
     lt_poservices-taxjurcode = ls_ml_esll1-txjcd.
     lt_poservices-tax_code   = ls_ml_esll1-mwskz .
     lt_poservices-date       = ls_ml_esll1-sdate .
     APPEND lt_poservices TO lt_poservices[].
     CLEAR ls_ml_esll1.
   ENDLOOP.
   CLEAR : lt_poservices.
*& Filling the po service values internal table from service internal table
   LOOP AT lt_poservices[] INTO lt_poservices WHERE gr_price GT 0.
READ TABLE lt_ml_esll1 INTO wa_msll WITH KEY packno = lt_poservices-pckg_no
                                           introw = lt_poservices-line_no
                                        extrow = lt_poservices-ext_line..
     IF sy-subrc EQ 0.
       CLEAR lt_posvalues.
       lt_posvalues-pckg_no    = wa_msll-packno.
       lt_posvalues-line_no    = wa_msll-introw.
       lt_posvalues-quantity   = wa_msll-menge.
*      lt_posvalues-net_value = wa_msll-netwr.
       lt_posvalues-serno_line = '01'.
       lt_posvalues-serial_no = '01'.
*      lt_posvalues-percentage = '100'.
       APPEND lt_posvalues TO lt_posvalues[].
       CLEAR : wa_msll.
     ENDIF.
   ENDLOOP.
note:- if it is correct give points

No delivery type for returns processing assigned to item 00010

Dear all,
I want to create a Return Purchasing Order.
I have got an error: No delivery type for returns processing assigned to item 00010
Please help to to find out problem. What do i have to check?

Hi,
Regarding the error ME392, please check the customizing under
the IMG path:
Materials Management
-> Purchasing
   -> Purchase Order
      -> Returns Order
         -> Store Return
Here, for the supplying plant in your Cross-company-code return, you
need to set up a delivery type.
In order to know the supplying plant, please, open the vendor master
data (XK03).
Select the 'Purchasing data' section.
Once you are in the screen SAPMF02K 310 follow the menu path 'Extras' ->
'Add.purchasing data'.
Here you will see the Plant that is linked to your vendor.
So, now, for this Plant, under the IMG path mentioned before,
set a a delivery type for the store return (NCR - Ret.StTranspOrd CC
can be used, for example).
Best Regards,
Arminda Jack

Need to populate 'Order' field for Frieght charges related GL account item

When we are creating Billing Document for outbound deliveries, we need to populate a spcific value (which is fetched from a bespoke table) in the 'Order' field (COBL-AUFNR) corresponding to the Frieght Charges related GL Account item in the accounting document.
Can anyone please suggest which user-exit/badi/bte we can use to implement this enhancement?
I have seen that there are some user-exits with names such as EXIT_SAPLV60B_XXX ('001' to '008') and several others. Please suggest some useful solution.

Hi
U can use the exit 004, 005 and 006.
Max

Order related billing for Partial Qty item in sales order

Hi SD Gurus,
In case of delivery-related billing we can create a bill for partial qty or item by creating delivery(against order) for partial qty/item. Is it possible to create order-related bill for the partial qty or item ?
Any suggestion on the subject is appreciated.
Thanks in advance,
Velmurugan

HI Velmurugan,
This can be solved through by doing an order related billing,
First check weather copy control setting is there for order to billing.
In item category check for billing relevance. Make it has order related billing.
Now do order related billing for partial quantity.
Regards,
Nagesh

Organization Hierarchy related setup for Item Organization Assignment prog

Similar Messages

Maybe you are looking for