"Organizational Unit for the vendor" not defined in SRM portal

Hi,
Iu2019m trying to create a supplier from the vendor list that appears in SRM portal in u201CStrategic Purchasingu201D u2013 u201CBusiness Partneru201D u2013 u201CCreate business partner: Supplieru201D u2013 u201CAdd external Supplier fromu201D.
When I select the supplier from that list, the u201COrganizational Unit in EBP for the Vendoru201D should be automatically defined. Instead, it is defined as 00000000 and when we try to change it manually to the correct one, it returns the error u201Cthe organizational unit does not existu201D.
Do you have any idea what is the problem? What am I doing wrong?
Thanks for your collaboration.
Best regards,
Andreia Nascimento

Hi
Did you change the org unit value from the txn PPOMV_BBP. Just try to enter the numerical part displayed for the root vendor org unit ID.
Not sure but you can also try maintaining table BBP_MARKETP_INFO and then check if it works.
Regards,
Sanjeev

Similar Messages

  • What does "Locations for this vendor not defined" - mean and how do I eliminate it

    A local restaurant sent me an e-mail with the statement " To receive your special birthday gift click here." When I do I get white screen with the sentence - "Locations for this vendor not defined". What does this mean and how do I eliminate or continue since I now can only go back to the e-mail. Using Firefox with AT&T Yahoo & Windows XP me

    Hello.
    Does this happen on other browsers (Internet Explorer, for example) or is it specific to Firefox?

  • HR ABAP: How to get the organizational unit for the penr as chief

    Hi ,
      I am new to HR ABAP. Could any one  specify if we have a PERNR  how we can get the possible values for Orga units,positions and the personal areas that this PERNR as chief.
    Thanks in advance,

    Hi,
    <li>Check the table PA0001 which contains Org unit(ORGEH), Position(PLANS), Personal Area(WERKS) assigned to PERNR.
    <li>Use SELECT query to get those if you don't use Logical database PNP.
    Thanks
    Venkat.O

  • No Organizational Unit for Bidder on the 'Manage Business Partners Screen'

    I replicated a vendor from R3 to SRM and there is no 'Organizational Unit for Bidder' listed. Because there is none, I cannot make any changes to the address of the Business Partner (Vendor) and there is no way to add the Organizational Unit for Bidder because it is all greyed out.
    I also tried to fix it in the GUI bbmainint screen but it cannot be fixed there either.
    Does anyone know how I can get that Org Unit for Bidder into the Vendor's Profile? I know what it should be, I just can't find a way to get it in there.
    Thanks,
    Laetitia

    Hi,
    the 'Organizational Unit for Bidder' is not listed in the transaction. You need to know this code every time you create a contact / employee for a specific suppliers.
    When you replicated vendors into SRM, the vendor records are assiged to a Org Unit. Depending on your SRM version (SRM 4.0 or SRM > 4.0), they are integrated into the Org Model. Enter exactly this root node for the supplier into the field 'Organizational Unit for Bidder'.
    It is just about knowing where the information is - then it works
    Cheers,
    Claudia

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Unit of measure EA not defined for language PT

    Hello,
    Vendor Communication is maintained in "Portuguese language-PT", while creation of Scheduling agreement system will given the below error, bcz Scheduling agreement will taken the Langause from vendr master
    "Unit of measure EA not defined for language PT"
    Table 006A contains no entry for this unit of measure.
    We have cross checked Material master and maintained the "langauge-PT" in material master additional data.
    Checked  T006A table for "EA" found for language "EN, DE, CN etc. not for "PT"  how to maintain T006A table for Portuguase langauge.
    Regards
    Mahesh Naik

    >
    Mahesh Naik wrote:
    > Hello,
    >
    > Suppose we have changed the source langauge "EN" to Target Langauge"PT" is it change all the Unit from EN to PT. after that how the system will pick english language's
    No, it just gives you all the units maintained in that source language as a proposal to enter the description in target language PT, there will not be any change to the source language EN while maintaining a translation.

  • Error message :PurchOrder : Unit of measure PC not defined for language ES,

    Hello,
    I am facing a problem with PO replication to R/3 backend.
    POs are not replicated to R/3, POs are in status 'Transfer Failed (E.Sys.)'  .
    When I check with 'RZ20' transaction I got this message :
    PurchOrder : Unit of measure PC not defined for language ES.
    SRM 4.0 Extended classic scenario
    Regards,
    Shaiek

    Hi
    This seems to be a configuration issue,.
    Pls maintain the unit of measure in configuration using transaction CUNI
    Hope this will help.
    Pls reward suitable points.
    Regards
    - Atul

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • Unit of Measure TON not defined for language PT ?

    Hi all,
    I'm new to MM and to SAP in general and I have 2 questions for now :
    1. I have a requisition which is set up using unit of measure TON. When I try to create the PO, an error message pops up saying " Unit of measure TON not defined for language PT ". Do you know what does language PT means and why does this error appears? When I try to convert the TON into TNE, the same message pops up : " Unit of measure TNE not defined for language PT ".
    I also can not convert TON into EA...any ideas why?
    2. How can I see the total value of a PO that has many lines ?
    Thank you very much
    Iuliana

    Hi
    Is this error  "" Unidade de medida *** não definida em idioma PT ""
    appearing only when you select Ton, or any other unit.
    pl. clarify.
    I have seen that you get this message when your loging Login language is Portuguese.
    Any how Configuration of units needs to be checked in
    Spro >General setting > check Units of measurements ,
    ( or pl. use Tcode --  Cuni )
    I also can not convert TON into EA...any ideas why?
    can you give me some more inputs, what erro are u getting ?
    2. you can see the total Po. values in Po header details
    under status tab view.
    if my soln is found usefull
    Pl. award me points
    Thanks
    Prasanna kumar .b.a

  • Not  able  to Assign Organizational Units to the Sites

    Hi all,
    while  configuring  intercompany  billing  I  am  not  able  to  assign  the  Organizational Units to the Sites.
    I  am  in  retail  system  and  maybe  here  I  have  to  do  something  else  before  seting  up  the  intercompany?
    Thanks in advance
    L

    Hi,
    Go through the Building block and their prerequisites
    http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
    http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
    Thanks
    Chidambaram

  • Error in BAPI_MATERIAL_SAVEDATA -  Unit of measure ****** is not defined;

    Hi,
    I am using the BAPI_MATERIAL_SAVEDATA to create material in the material master, I am passing
        ls_bapi_head-basic_view    = 'X'.
        ls_bapi_head-purchase_view = 'X'.
        ls_bapi_head-mrp_view      = 'X'.
        ls_bapi_head-storage_view  = 'X'.
        ls_bapi_head-quality_view  = 'X'.
        ls_bapi_head-account_view  = 'X'.
    these views, I am passing the necessary details to the BAPI . But it is giving me an error ' **Unit of measure ****** is not defined; check your entry**'. plz help me how to solv the problem.
    Thanks,
    shekar

    Hi Vinod,
    It was very usefull for me thanks,
    I have another problem i have  to pass Valuation Class - bklas and in quality view nspection Type - 'art', Inspection Type - Material Combination is Active - 'aktiv'.
    please let me know how to pass these values to FM
    thanks,
    shekar

  • Unit of measure JHR not defined

    Hi Friends,
    What can cause this problem. I am getting this error message
    "Unit of measure  JHR  not defined"  after I am creating a Shopping card in EBP.
    JHR is existing on both sides Backend and EBP in the table T006.
    Regards
    Marco M.

    COM_PRODUCT_UNIT
    you need to debug this program . JHR is not SAP or international UOM . it could be customised one
    COM_PRODUCT_UNIT_READ_API
      Is a unit of the product convertable into i_unit?
        CALL FUNCTION 'DIMENSIONCHECK_DIMENSIONLESS'
          EXPORTING
            meinh                       = iv_unit
          EXCEPTIONS
            dimension_not_dimensionless = 1
            t006d_entry_missing         = 2
            t006_entry_missing          = 3
            OTHERS                      = 4.
        CASE sy-subrc.
          WHEN 0.
            MESSAGE e020(com_product_unit) "unit is dimensionless
                   WITH iv_unit
                   RAISING unit_not_allowed.
          l_lines = l_lines + 1.
            CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
              EXPORTING
                i_base_unit     = ls_base_unit-unit
                i_alt_unit      = iv_unit
                i_tabix         = l_lines
                it_pr_unit      = lt_pr_unit
              IMPORTING
                e_add_const     = l_add_const
                e_numerator     = l_numerator
                e_denominator   = l_denominator
                e_unit          = l_unit
                e_sub_num       = l_sub_num
                e_sub_denom     = l_sub_denom
              EXCEPTIONS
                not_convertable = 1
                overflow        = 2
                OTHERS          = 3.
            CASE sy-subrc.
              WHEN 1.
                MESSAGE e020(com_product_unit)
                      WITH iv_unit
                      RAISING unit_not_allowed.
       CALL FUNCTION 'COM_PR_UNIT_CHECK_CONVERTABLE'
              EXPORTING
                i_base_unit     = ls_base_unit-unit
                i_alt_unit      = iv_unit
                i_tabix         = l_lines
                it_pr_unit      = lt_pr_unit
              IMPORTING
                e_add_const     = l_add_const
                e_numerator     = l_numerator
                e_denominator   = l_denominator
                e_unit          = l_unit
                e_sub_num       = l_sub_num
                e_sub_denom     = l_sub_denom
              EXCEPTIONS
                not_convertable = 1
                overflow        = 2
                OTHERS          = 3.
            CASE sy-subrc.
              WHEN 1.
                MESSAGE e020(com_product_unit)
                      WITH iv_unit
                      RAISING unit_not_allowed.
              WHEN 2.
                MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                        RAISING overflow.
    E        COM_PRODUCT_UNIT       020     Unit of measure & is not defined for product
    When do you get this error ? while ordering Internal goods and services or describe procurement?
    or while procure from catalog.

  • " Unit of measure ****** is not defined; check your entry in table T006

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in  WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.

    I´m Trying to create a material from MDM to SAP and I´m monitoring the IDOC in WE05 and i get the next message:
    " Unit of measure ****** is not defined; check your entry
    Message no. M3490
    Diagnosis
    The key for the unit of measure you entered is not defined in table T006.
    Procedure
    Define the unit of measure through Customizing (Materials Management). "
    In MDM we are sending as remote key the SAP Code and this code exists in the table T006, but in the information of failed IDOC say:
    " Messages have been issued: number 0000000000184470
    Message no. MK101
    Diagnosis
    During inbound processing for the IDoc, messages have arisen while checking material data. "
    If someone has information about it ,pls I´ll appreciate your answer.
    Regards Itzell T.
      Hi Itzell T,
          While creating the material the unit of measurement which is entered is not existing in the SAP System. The unit of measurement entered during creation of material is cross checked from enteries of check table T006.
          So, functional consultant should take care of this issue just let him know the message.
       He know what problem actually is and fix the problem as Ankur had said.

  • Message no. ME021: One-time vendor not defined

    Hi guys,
    I create a vendor without problem, but when i try to create a purchase info-record, here is the message i have.
    One-time vendor not defined
    Message no. ME021
    Diagnosis
    It does not make sense to allow a one-time vendor in this situation.
    Procedure
    Check the vendor number you entered.
    Can somebody have an idea of what i can do, i'm still a beginner, so if you need more information let me know.
    Thanks'

    if this starts all of a sudden, then something must have happened in your system.
    maybe someone modified coding, maybe someone implemented OSS notes and this is is a side effect.  maybe it was just a customizing change (which I dont know) .
    I woulod just check the transports done between the date were it worked succesully and the date it started with the porblem.
    Check the transports made to your system in SE10 (click the binocluar button there to get a selection screen to search for transports)

  • Quota planning for the vendor products

    Dear Folks,
    I have a scenario where my client is a authorized company to sell the products of some vendors and to maintain this, my client (company) has to achieve some annually targets given by the vendors.
    My requirement is to: Define the quota planning for sales representative based on vendors also.
    Do i also need to first create a custom field in product for the vendor while replicating from ECC?
    Thanks in advance.
    Best Regards,
    Dinesh.

    Hi Dinesh,
    In that case , you can do quota Planning based on the org unit structure only.
    Maintain Org unit considering the hierarchy such as :
    Upper level - Product
    Middle  level - Vendor
    Lower level - sales Representatives
    It means you have to create org structure for each possible combinations.
    If you have existing Org unit mapped with ECC , you have to change the org structure in CRM and maintain the above structure between the  existing org unit if you want ECC org units getting determined in Opportunity level.
    Best Regards
    Ganesh Somasundaram

Maybe you are looking for