OS System catalog not available

Hello,
I have successfully discovered a Solaris 10, Sun Fire E25K Domain using Discover and Manager Assets. It also deployed the agent successfully, and the asset is seen and responding correctly.
Most of the Actions on the right hand side panel are available, except for Compare System Catalog, and View/Modify Catalog.
Does anybody know why that catalog was not created during discovery, and if not how can I get it created, so that I can do a baseline, and OS upgrade ?
I am running Ops Center 2.5, on a Solaris 10 intel server.
Any assistance would be appreciated.
Thanks
Warren

takes up to 20 - 30 minutes sometimes
also have had to uninstall and reinstall agent especially on Solaris 9 servers
to get the catalog to populate.

Similar Messages

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

ORA-29547: Java system class not available: oracle/aurora/rdbms/Compiler

Hi experts,
I get the above error when I run the following code using sqlplus:
create or replace and compile java source named "DirList"
2      as
3      import java.io.*;
4      import java.sql.*;
5
6      public class DirList
7      {
8      public static void getList(String directory)
9                        throws SQLException
10      {
11         String element;
12
13
14         File path = new File(directory);
15         File[] FileList = path.listFiles();
16         String TheFile;
17         Date ModiDate;
18         #sql { DELETE FROM DIR_LIST};
19
20         for(int i = 0; i < FileList.length; i++)
21         {
22             TheFile = FileList[ i ].getAbsolutePath();
23             ModiDate = new Date(FileList[ i ].lastModified());
24
25             #sql { INSERT INTO DIR_LIST (FILENAME,LASTMODIFIED)
26                    VALUES (:TheFile,:ModiDate) };
27         }
28     }
29    }
30 /
create or replace and compile java source named "DirList"
ERROR at line 1:
ORA-29547: Java system class not available: oracle/aurora/rdbms/CompilerAny body can tell me what to do to run external commands like os commands using pl/sql in details with example.
I will appreciate any sooner response.
Thanks

What is the output of this query?
SQL> select owner, object_name, object_type from dba_objects where object_name = 'oracle/aurora/rdbms/Compiler' ;
OWNER                          OBJECT_NAME                     OBJECT_TYPE
SYS                            oracle/aurora/rdbms/Compiler    JAVA CLASS
PUBLIC                         oracle/aurora/rdbms/Compiler    SYNONYM
2 rows selected.
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
SQL>

JDEV_HOME \jdev\system\ folder not available in Jdev 10.1.3.3

Hi ,
I'm trying to configure Harvester in JDev 10.1.3.3 and as part of process i need to copy tools.xml text from Introspector folder to <JDEV_HOME>\jdev\system\Oracle Jdev 10.1.3.3 folder as per manual.
But, I cant seee this folder at all. Can someone please help regarding this.
Cheers,
Bhuvi

Not sure why its not available in Jdev 11g, and 10.1.3 as well. But i found it in 10.1.3.3 version. Weird but issue resolved. Its available exactly mentioned in manual.

Business system is not available

Hi all,
I am working on file to idoc scenario where i cannot find my BS in configuration part where i created in SLD,I am working this scenario on editors not by wizard but where as in wizard i found my BS,but in editors my BS is not available help me out.
With Regards,
Prasad

Check whether its already added...Change to objects tab and check under service with out party or service with party and see whether its already added...If it is, then right click on that business system and say add to sceanrio...follow the wizard...If its not already added...
Then follow these steps
In configurator....From menu ...Environment---Clear SLD data cache and try...
It should work...
Regards,
Ravi

Option to Upgrade Photoshop Elements Catalog not available (LR5, PSE 12, Win 8)

Hi there. I have trial versions of both Photoshop Elements 12 and Lightroom 5.2 (trial licenses are both still active (i.e. not expired)). I'm looking to import my PSE12 catalog into Lightroom before I plunk down the money to buy it.
I cannot, however, locate the "File->Upgrade Photoshop Elements Catalog" option in LR5.
I may have originally installed LR 5 before installing PSE 12. So I uninstalled LR5 and reinstalled it. Still no luck - the option isn't there.
Any other ways to force LR5 to look for the PSE 12 catalog? Will LR5 even recognize a PSE12 catalog?
Your help is greatly appreciated - thanks!
Note: Using Win 8.1

dj_paige a écrit:
...But we can also wait and see report from other users.
Unfortunately, there is no doubt that the conversion of PSE12 catalogs has been omitted. It's not the first time : I also had to wait for LR4 to be able to convert PSE11 files. We may hope that Adobe will acknowledge the fact, and possibly solve the problem for future versions of PSE.
Of course, it's not a priority for Adobe: the ability to convert PSE catalogs is mainly a sales argument to make the jump from the PSE Organizer to LR easier. Not so many cases, and anyway you can always write metadata to files in PSE and import later in LR. After the jump to LR, you rarely have more PSE catalogs to convert.
However, maintaining misleading update notes by Adobe is not a good point in favour of LR. I do consider that the ability for LR to convert PSE catalog was and still is a very smart demonstration of the ability to deal with database organizational systems. I also consider that once that conversion process is mastered, the update process for each new Elements version is not such a big deal.

Catalog not available for Costa Rica

I've recently bought a Palm Pre2... as I should say this is the best smart phone i've had; i'm very frustrated by the fact that I cannot download anything from the Catalogl this because it is not open yet for Costa Rica.... c'mon!?!?!?
I cannot download any app, I can get system updates, but just that.
Is there any way I can get to the catalog? Can i use a USA sim and reset the profile? Please let me know what's the trick so I can get to download applications.
PLEASE let me know....
Post relates to: Pre 2 p102una (Unlocked NA)
Post relates to: Pre 2 p102una (Unlocked NA)

If you have activated your phone using SIM card from Costa Rica you dont have an option get applications from US even if you try and sign in again using US Simcard. Partial erase, full erase, nor WebOS Doctor can fix this.
The device record is created once after creating your palm profile and this cannot be changed afterwards. Your first good activation will be for that device, no matter what you use next time you activate.

ISA: catalog not available -- FM for determining available catalogs

Hello guys,
we're currently implementing CRM e-commerce (ISA). When logging on to the web shop, an error message "The catalog that you have selected is currently unavailable; try again later " occurs.
I searched the existing forum entries and found some similar issues, however, non of the given solution solved my problem. Furthermore I've found note 980678 dealing with this, however - again, the problem still persists.
I assume that this is not a technical issue but has something to do with the catalog determination depending on the currently logged in business partner. Thus, I searched for function modules dealing with this, found CRM_ISACAT and CRMISAICAT, still no solution.
I'd appreciate any hints on how to continue analysing this problem.
Many thanks & regards
Wolfgang

Hello Wolfgang
I am a CRM Consultant in the ISA component.
This is a common issue and there can be many causes.
In this case I would suggest you open an OSS message with the information
specified in the following notes:
1094659 Support for Internet Sales Release 4.0
1091792 Support for Internet Sales Release 5.0
We can then logon and help to resolve this issue.
Thanks and best regards.
Peter
Edited by: Peter Murphy on Jan 29, 2009 2:56 PM

System Reserved Not Available in Windows 8.1 Pro

Hi, everyone! I have a doubt here.
I have done the installation of Windows 8.1 Pro in my free dos laptop. I did custom installation, followed by "Choosing Partition to install Windows" step. There were two types of partition shown which were "system" and "primary",
and then I chose the "system " type partition to be installed Windows. ( What I am worried is that I did a different way compared to the tutorials in Internet)
Hence, there has no System Reserved Partition in my pc.
My doubt is that, is there any problems or errors that will occur when without the mentioned partition? As I searched in Google I have done another way when installing Windows.
Thanks for your fast reply.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Systems are not available in the NWDS but in the Web-client

I'm at presnt using the VC 7.11 in the web client. For enlarging the default components by a couple of own one I'm trying to use VC in the NWDS. Now I'm facing the problem that the default systems (Busniess Objects, Portal Content, Portlet Applications, Services Registry, Visual Composer Model, Web Dynpro Application, Web Dynpro Component) are shown in the "Search" panel but not those which I have created e.g. our ERP system.
I have no clou what I'm doing wrong.
Thanks a lot for your help in advance.

Ok, it seems I was finally able to answer my questions by my own. For a System in the NWDS you have to create the system once again under Window > Preferences > Destination Configurations > R/3 Configuration ([https://cw.sdn.sap.com/cw/docs/DOC-102007?treeid=DOC-99669|https://cw.sdn.sap.com/cw/docs/DOC-102007?treeid=DOC-99669])

Learning solution Course catalog not available on portal

Hello Experts,
I have created Course Catalog on R/3, when I try to access it on portal it doesn't show me any course groups except unassigned course types. But while testing HCM_LEARNING (BSP Application) it does show me all the course groups and even allow me to book course for training.
Can somebody tell me what configuration I may be missing, Your help in this regard will be highly appreciated with forum points. Thanks alot.
Regards,
FG
Edited by: faizghani on Mar 22, 2010 3:04 PM

Hi FG,
Please goto t-code PP01 - (or lso_psv1) and check "Subject area" flag in infotype "Course group info" - 1063 to be selected for the relevant course groups (object type L).
If the issue persists please check the newly published SAP Note 1441984.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Mar 22, 2010 3:06 PM

Error msg: System Preferences not available on this Mac?

I want to change my screensaver -- I last did it in the Fall of 2010. Now I get this error message? When I use Finder to search for System Preferences, the icon is faint with a strike through it. How can I CHANGE system preferences? Did this happen with last update of the OS? Or when I set up iCloud to use with my iPad2? Just had my iMac in the Apple Store and Genius Bar kept it overnight after checking out fail messages regarding the Drive and directories after running Tech Tool Deluxe. They ran other checks and said it was all clean and the Drive is fine. But what's this new issue?

It sounds like the System Prefs app is damaged.
What version of OSX are you running? Assuming it's not Lion, you should be able to use the Pacifist app to extract it from the Install disc.
Or, reinstall OSX. See Installing the ''combo'' update and/or Reinstalling OSX.

Fields in Field Catalog not available when creating condition table

I see that field HIEBO01 to HIEBO12 are available in Field Catalog, but I don't see these fields when creating condition table
Please let me know what I am missing here.
Any insight on this would be really helpful. Thanks guys!

you need to get them added to the pricing structure KOMKAZ or KOMPAZ based on whether you need @ header level or @ item level respectively.
and then add the logic in the sales order user exit for these added field in the pricing_prepare_TKOMK or pricing_prepare_TKOMP...again based on header level or item level.....
Then go back to the field catalog and select from the respective structure and add them, Then you can see them when creating cond tables.
Hope this helps. Hope i havent misunderstood your query.,
Regards
Sai

System Preferences Not Available

I am having trouble with my Trackpad and wireless keyboard randomly not working. When this happens (both together) they will not come back on untill I force a reboot with the on/off button. I have now noticed that when this happens the Systems Preferenced button will not open the System Preferences window. It is becoming a real issue as it can happen at any time.

Is your data backed up from before this happened? If not, you'll probably need to recover your data and piecemeal put it back together from the parts that are not system related. There are numerous tools for data recovery here: My data has become inaccessible, and I don't have a backup!
If you are backed up, recover all but any applications that affect system cache. These can stop important applications such as System Preferences from being able to launch.

Neighbors Have High Speed Internet but Systems Says Not Available

Hello,
I have been trying for the past week to get High Speed Internet with Verizon. Two times I received an email saying… Although your line qualified for High Speed Internet service during the initial phases of the order process, unfortunately, we are unable to provide you with Internet access on your line ending in 0602 .
I live in a small subdivision on the outskirts of Colonial Beach, Virginia with approximately 500 homes.
I have two neighbors, one on each side of me i one would be the closest to the substation) and another neighbor about one block past my house.  The second neighbor drives past my house every day to get to their house.
I spoke with a local Verizon employee who told me the computer was turning down the High Speed Internet because of distance and that I needed to have someone at the local office, over-ride the automatic turn down so that it would be installed. After the second computer automated turn down, I spoke with Eric – he said to give the next tech this information – Acct Number XXXXXX Order Number XXXXX at the DSL Technical support so we could get this resolved. The DSL Technical support guy was NOT interested in obtaining the account number or Order number Eric gave and said either the Router was filled or I was too far from the Loop. I explained the neighbors and it still didnot seem to matter. He was foreign and we did seem to have a significant language barrier. He then transferred me back to Sales.
Over and over I requested to speak with the actual Local Office in Warsaw, VA so I could be given a reasonable explanation.   I spoke with a woman who said the two neighbors were closer to the loop than me. When I asked how this was possible if I am in the center of the two she said maybe it was because of a curve in the road? She also said she was the local office but was not able to tell me where that office was located so obviously it was not the actual "local" office.
How can I get someone to physically come out and determine why I cannot get High Speed Internet?  Who can I contact to make a formal complaint.
Thank you for any input.

Here, maybe, is a FAQ that explains why
http://www.dslreports.com/faq/1214
All DSLR (.dslreports.com) FAQs » Verizon Online DSL FAQ » 3. General » Verizon says no DSL, but neighbor yes?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

OS System catalog not available

Similar Messages

Maybe you are looking for