Os X 10.4 installing thru network ?

Hello together!
I didn't found yet the answer of my question in the discutions Pls excuse if already answered somewhere. Hope it is easy for you!
Also: I have a Power G3 Mac Blue&White (576 Mb, USB, Firewire ) but without a DVD device. May I install the Os X 10.4 Tiger from another computer in the network (A windows 2000 PC)?
Thank you!

No, OS X does not work on non-Apple hardware. Why don't you see if you can find another Mac with a DVD drive or an external DVD drive you could borrow.
You could then put the Tiger DVD onto the USB drive by using the Restore option of Disk Utility:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.
However, there's still the problem of booting the computer from a USB drive. As I said before most pre-Intel Macs cannot boot from a USB drive.
If you have access to another Mac with Firewire you can use Target Disk Mode to install Tiger on the G3 - Install Tiger Without a DVD Drive and How To- Installing Tiger Using FireWire Target Disk Mode.

Similar Messages

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers

Is it possible to create a configuration profile that will install multiple network printers and their associated drivers?
I was not able to find profile manager on my employer's installation of 10.6 Server. Is this only a feature of 10.7/10.8 server?

10.6 server does not have profile manager, profile manager is only available in 10/7 and 10.8 server
for 10.6 server you'll need to use wgm and server admin
printer management with 10.6, I recommend you read the relevant server manuals regarding
print server and user management, printer management

How do I install a networked non-post script Ricoh printer?

Hi,
I am relatively new to Macs, and I am having trouble installing a networked Ricoh Aficio MP C3501 (non-PostScript) printer. It seems the native driver is for PostScript version of this printer only. I am running a new MacBook Air.
When I try to add printer via IP address & connect, I get this message:
"Unable to verify the printer on your network.
Unable to connect to ‘10.253.97.48’ due to an error. Would you still like to create the printer?"
I have tried the steps here, with no success:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o#pxlmono_1.6_for_Mac_OS_X_10.3.x_.28Panther.29_-_Mac_OS_X_10.8.x_.28Mountain_Li on.29
I am assuming because of some of the changes made in Yosemite.'
I found this fix, but it would appear to only work if you had the printer installed on Mac PRIOR to Yosemite, and this would repair the "broken connection":
Ricoh MP C2500 not printing after upgrading to Yosemite
Any suggestions?
Thanks in advance,
Chuck

Download the mac driver for your printer, from your printer manufacturer.
Open the downloaded file in finder click on it and open it. If using wireless then set up the wirless network on your printer
see
http://support.apple.com/kb/HT4670

Install a network priunter driver in Windows 7 as a printer is offline or disconnected

Can anyone help me ? How to install a network priunter driver in Windows 7 when the network printer is offline or disconnected?

DP
Your best bet is to contact the printer mfr. We dont even know what printer you have let alone what the issue is/
Wanikiya and Dyami--Team Zigzag

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How to install a network print on solaris 10

How to install a network print on solaris 10?
Thank You!

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

I am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.

How do install the network adaptor for windows 7 with boot camp?

How do I install the network adaptor for windows 7 with boot camp?

boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp

HP 2700 connection to my MacG4 thru network

HI! Can anyone please help me on how to be able to connect my HP 2700 printer to my Mac G4 thru wireless network?
Thanks in advance for your kind assistance

Not all printers support network printing, make sure the drivers for the drive are installed on your machine, and the machine its attached to is on.

Problem printing thru network with new 8500A all-in-one

I installed a new Officejet pro 8500a plus on my network. I have 3 computers on the network set up this way: DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to main COMPUTER and other 2 computers print through the main computer.
I installed the printer sucessfully and ran the HP network wizard following the dialogs for connecting through another computer. I can print, and fax fine from the main computer but not from the other computers. I configured the printer as "shared" on the main computer and the other computers recognize the printer and set it as the default printer. But when I try to print form the other computers nothing happens. When I go into control panel - printers - properties - ports on the main computer, the printer is listed as USB002 but when I click on "configure" I get "An error occured during port configuration. This opperation is not supported".
Main computer is running Windows Vista with current updates
Other computers are running Windows XP SP2 with current updates.
Any ideas?
Thanks, Jim
This question was solved.
View Solution.

Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Bought an HP Laserjet 1536dnf MFP, installed on network,. registered w/HP, signed up for E-Print

When I try to sign in onto e-print, I get an invalid login error

Hi IndianWellsCH,
I just want to verify the steps you have performed.
Printer installed on the network.
You currently have the latest firmware version installed: 2011-04-05 Version:20110405.
Enabled web services by logging into your printer's EWS (Embedded webserver).
ePrint mobile printer code has sheet printed.
If that's the case then you only need,
Go to www.hpeprintcenter.com,click Sign In, then click small blue Sign Up button at the top of the box and fill out your info.
Click Add Printer, then enter your printer code.
Customize your printer's email address.
That's pretty much it.
If already have an ePrintCenter account, then on the main page you will then need to click Sign In, then below where you would enter your password click the "Forgot Password" link and enter your personal email address you use to create this account.
***NOTES*** As of now, registering your printer with HP doesnt auto register you with our ePrint Center website.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Trying to install on MacBookPro with Parallels and Windows 8.1. Downloaded the CreativeCloud.exe but says I can't install from network drive

I sometimes like to use Photoshop CC and Lightroom on the Windows side of my MacBookPro with Parallels. I had to reinstall Parallels and also Windows 8.1 recently and am trying to reinstall some of the software that I had previously on the Windows side. I downloaded the CreativeCloud.exe program and when I try to install it from the Windows side, get a message that I can't install Creative Cloud from a network drive. Where can I put the CreativeCloud.exe so I can install it?
Thanks!

You probably need to check your drive setup for the Parallels environment. Nothing to do with Adobe.
Mylenium

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Solaris 10 x86 Install skips Network Configuration

I am trying to install solaris 10 x86 on a Dell Dimension and not able to get the network card to work. The network card is Ok as I tested it by installing Windows XP on the same box.
Ifconfig -a shows only le0.
What is the best way to enable the network card?
Any help is appreciated.

I think u should do one thing.
1) Find out your name of your NIC card. ( Probably if u installed XP and seen which NIC is that)
2) Download drivers for your NIC by giving something like " download network drivers for solaris for ' your NIC' ".
3) If fortunately if u get drivers, copy it on ur solaris machine and install it by reading readme file of the drivers.
4) In readme file u will also find NIC name.
5) Then run command " ifconfig (card name e.g. bcme0) plumb
6) Now run "ifconfig -a" if u find ur card name there except le0 then congrats u have done it.
7) Move ahead with network config.
Note : - I am not sure but i think if ur machine is old then u will not get drivers for it.
Tell me if u get success........

How to install a network card on Solaris 10

Hi to all,
I have installed for the first time Solaris 10 on i386 system.
All went fine. Although Solaris did not found the PCI network card, is this normal?
How can I install the (Realtek) network card;
Thank you.
Costas.
Edited by: tritsako on Feb 9, 2009 11:33 AM

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

Os X 10.4 installing thru network ?

Similar Messages

Maybe you are looking for