Os x 10.8.3 server netinstall and netrestore step by step

hi all, i am looking for step by step instruction to configure netinstall and netrestore with automator setting and configuration. server is 10.8.3. any help would be great.

The best reference I have found is "Mac OS X deployment v10.6" by Kevin M. White.
This forum and also the one at afp548.com are a big help for troubleshooting.
Good luck!

Similar Messages

Kernal Panic on Netinstall and Netrestore

Hi All
I have been using system image utility as per what apple state you should do for mavericks, and it its a easy process to create the netinstall and restore, on the server it shows that it is active and working but when i try boot into it the machine kernal panics and just restarts ? what am i doing wrong please help
Thanks

as piperspace is saying, you need to look carefully at the Installer on which you based this image.
An Installer that "shipped in the box" with a Mac has Drivers for only that model Mac, and no others. There is no way to "improve" it to add the other Drivers.
An Installer that you bought, even for $0 (we used to call it a "Full Retail") contains "Drivers for every appropriate model Mac."

Step by Step : How to Create an SSL Server Certificate (Part 3)

How to Create an SSL Server Certificate (Part 3)
In the previous part you have completed step 10, now you are almost there.
Step 11:
This is another very important step.
Leave the settings as is or tick more options if you know what you do.
Step 12:
Again leave as it is.
Step 13:
Another important step !
In the DNS Name field enter the host name(s) separated by spaces (or commas), e.g.
myserver.name.private myserver.dyndns.org
You can enter your local IP if you wish.
Step 14:
Certificate Assistant now procedes to create your certificate. Within a few seconds you should see the new certificate in your Keychain.
Switch to Server App (if at this stage Server App has crashed, don't worry , re-open Server App and proceed.
Repeat step 2 described in Part 1 and select the new certificate from the drop-down menu of available certificates.
You may want to use this certificate for all services (iChat, iCal, Mail, Web) or create different ones.
If you use the same certificate for all services the name of the certificate is diplayed next to "SSL Certificate", if you don't you will see "Custom" instead.
Addendum:
1. Do not forget to open port 443 in your router to enable https connections.
2. Enable SSL in your iCal account settings if you wish.
Enjoy your server !

Hi,
Are you talking about the Mercedes leaderboard ad? Because that look a lot more complicated than "fade in - fade out" images?
Anyway... I am looking at the easiest way to create a banner ad with fade in - fade out images that I have created in illustrator.
This tutorial helped me alot.
http://www.youtube.com/watch?v=gFw-1D8yaMs&NR=1
cheers

Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me

Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

First of all David you are faster responding to email than I am. Thanks.
We tried your scheme with no luck. You are using "ROOT" as your war file
name ROOT, correct? Are you sure the jsp would reference
"/images/MyProject/nppnback.gif"? Why is "MyProject" in there? Where is
the directory "images" defined to Tomcat? Is it a default?
Here's another try at explaining:
In my JSP I have;
<IMG SRC="/images/ef.gif" ALT=People Banner">
My application is in webapps/EformsAppWar
(jsps in EformsAppWar/EformsApp/eforms/*.jsp)
(classes in EformsAppWar/WEB-INF/classes)
so images are in webapps/EformsAppWar/images
and there is, indeed a ef.gif there.
However with no server.xml changes (everything default), Tomcat 3.2
gives a 404 in his log and states in the 404 message that context is
null (CTX < >) and ca't find /images/ef.gif + NULL.
By the way I just noticed that in Tomcat 3.1 I have the images directory
directly under webapps.
----- Original Message -----
From: "David J.L. Martin" <<a href="/group/SunONE-JATO/post?protectID=114166018056146134184102046176231239071179066034">dave@t...</a>>
Date: Wednesday, May 23, 2001 3:35 pm
Subject: Re: [iPlanet-JATO] Tomcat 3.2 serving images and html?
This works:
If the doc root is webapps\ROOT --
Using defaults...jsp's would be put in
webapps\ROOT\MyProjectApp\MyProject\*.jsp
and images would be put in webapps\ROOT\images\*.gif
Then in your jsp...use the following reference:
"/images/MyProject/nppnback.gif">
That will work just using defaults and not playing with any of the
config files...
ie. webapps\ROOT\WEB-INF gets updated as well (with required
classes).
djm
TechPie
916 924-1832 (office)
916 730-4743 (mobile)
916 313-3531 (fax)
<a href="/group/SunONE-JATO/post?protectID=114232044112042209130232046248130100239179057215113109152006048067">dmushrush@e...</a> wrote:
Many of you are running Tomcat 3.2. Can anyone tell me how to get
images to be served by Tomcat. In 3.1 if I referenced /images/image.gif> in my JSP, I could just place the images
directory in the application
(context) directory.
The default docBase is webapp> that webapp> relative addressed as /images/image.gif but such is not the case.
I have put the images directory almost everyplace possible with no luck.
I have explicitly defined docBase in tomcat/conf/server.xml and still no
luck.
I currently have the following in conf/server.xml
<Context path="/EformsAppWar"
docBase="c:/tomcat/webapps/EformsAppWar"
crossContext="true"
debug="0"
reloadable="true" >
</Context>
I place images in that directory structure but still take 404's and in
the log it refers to context as /images ????
I'm probably doing something (or not doing something) foolish. Anybody> have a remedy.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

Time Capsule blinks yellow,when I go to airport utility to set up, it Says This apple wi-fi bse station doesn't have any DNS server addresses and might have trouble connecting to internet. My internet works, but I can't back up anything. What do I do??

Worked fine for about a couple of weeks after my son -law installed the time capsule. I can access the Internet both from my wife's I phone and from my desktop. I think that I need to get the DNS server numbers and put them in the two blanks; but where do I get them? Thanks, Jim

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

DNS Issues - Can ping server name and IPs but not FQDNs.

Hi All,
Hopefully some one can help me here, I am having an issue where one of my domain attached servers cannot ping any FQDNs in the environment but it can ping the host names and the IPs and look up the host names from a reverse look up.
We have done the following troubleshooting:
Flushed and registered DNS cache.
Restarted the DNS client and net logon services on the effected server
Preformed standard checks and commands such as:
Checked the event logs and found there were warnings for DNS registration.
Compared the DNS settings in the network adapters across the rest of the servers in the environment and found that they were all the same. DNS Suffixes are added in the correct order and are set to register.
Pinging FQDNs which is not giving any results.
Tracert FQDNs which is also not giving any results.
Nslookup which is querying the DNS server directly and giving results as expected
Ran the command which reported successful: dcdiag /test:registerindns /dnsdomain:sub.domain.net /v
Checked and updated the permissions on DNS for the affected server to give the server full control of its own DNS entry.
Replaced the DNS Client service DLL with one from a server that is working as expected.
Also worth noting is that the affected server (as well as every other server in the environment) has 2 NICs, one that communicates with DNS and AD and the other does not have any DNS IPs set.
Not this is not the first time this happened, a reboot fixed the issue before but it seems to be a reoccurring problem now.
If any one can shed some light on this issue I would be grateful.
Regards,
Steve.

Hi Steve,
First, we should confirm if this issue is caused by DNS.
When you ping the FQDN, does the server show the correct corresponding IP address?
If no, there should be some error messages. If it is possible, please post the screenshot of this issue.
To check the process about how does server resolve the FQDN, please follow the steps below:
clear local DNS cache with command ipconfig /flushdns
perform the network capture
ping the specified FQDN
Check the DNS traffic
To download Network Monitor, please click the link below:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Besides, have you tried to update the NIC driver to the latest version?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Report server 6i and Report services 10g

what is the extra features in Report Services 10g which are not available in Report server 6i.
why would we use AS report services 10g rather then report server 6i,and our only requirment is to run oracle report on web which can fulfill with the help of reports server 6i.

There is a long list of new features and I cant put all of them here
You can see docs below
For running on Web 9i, 10g moves to Servlet based architecture (though old cgi mode is available for backward compatibility). Reports behaves as a component in IAS and can be monitored and managed through Oracle Enterprise Manager (OEM).
More details here
http://www.oracle.com/technology/products/reports/index.html
and here is the 10g datasheet
http://www.oracle.com/technology/products/reports/10g/DATASHEET.HTM
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

Can i use same Server for server side and client??

Hi,
i m developing webservices in java and using two different server for server side and client.
e.g. i m using one tomcat server on a machine to run webservice and again using one more tomcat server on client side at different machine.
and hence it need two tomcat server.
But i want only one server to run webservice and client.
So please help me out...
Thanks

Hi,
It is always recommended to maintain different servers
REgards,
Ravi.

Why did my server crash and what to do to prevent this?

hi there,
i've been following the installation guide on single host and all looked well until yesterday all of a sudden i couldn't see my mail tab when using webmail.
i tried re-logging in several times and from three computers at home but no mail tab was dispayed (calendar, address book, etc were fine). in some occasions i have been displayed an error msg saying i should reconfigure the server.
so i went on today to check the server but having a very limited knowledge of administration i couldn't figure out what to check and where so i stopped all services as advised in single host guide. notably web and messaging servers (or services?) weren't running. i restarted them and now require some help to diagnose why this all happened as i was not getting any emails until the server was restarted.
i was able to log in yesterday morning however in the afternoon server has crashed. it didn't restart or hung up but web server wasn't running anymore. the last email i received was 3.21 pm yesterday. after i restarted all services today, a few emails were displayed immediately with current date and time (10 am today), however i don't know whether these were emails received while server was 'malfuntioning' or they are some left overs from last seconds of working.
i remember myself running update service on the server yesterday and it looked okay today's morning when i found it finished updating the computer. could this be the reason? did update service stopped web server from running?
also after i restarted the machine this morning i had to re-run all services all over again. don't they just start automatically upon reboot? what if power fails and my APC UPS shuts machine down and then boots it back when power regains?
pls help me as i am new guy on the block and want to stick to Sun products but don't want to be put off by some mysterious errors and instability of such a great software package which CommSuite defintiely is.

Graham_Brown wrote:
i've been following the installation guide on single host and all looked well until yesterday all of a sudden i couldn't see my mail tab when using webmail.If you cannot see the mail-tab you need to verify whether the messaging server processes are running. It helps to have a high-level view of how things fit together:
http://docs.sun.com/app/docs/doc/819-4440/6n6jfgch0?a=view
In this case for the mail-tab to work you need messaging server running, specifically the mshttpd (webmail) process and the imapd (IMAP) process.
i tried re-logging in several times and from three computers at home but no mail tab was dispayed (calendar, address book, etc were fine). in some occasions i have been displayed an error msg saying i should reconfigure the server.The error message advising to reconfigure the server is misleading. If this was the first time you accessed the comms-express interface and had no mail-tab then the message is pointing out that you may have misconfigured something (which was really easy to do in earlier releases). As you had already successfully accessed the mail-tab this is more indicating that something is now broken/not-running correctly.
so i went on today to check the server but having a very limited knowledge of administration i couldn't figure out what to check and where so i stopped all services as advised in single host guide. notably web and messaging servers (or services?) weren't running. i restarted them and now require some help to diagnose why this all happened as i was not getting any emails until the server was restarted.Four things you can do at this juncture:
1. Configure coreadm to capture any future core dumps (assuming of course the processes died abnormally e.g. coding issue, memory starvation ...) http://docs.sun.com/app/docs/doc/819-5355/6n7eo3v6v?a=view
2. Enable auto-restart of processes. http://docs.sun.com/app/docs/doc/819-4428/bgadd?a=view
3. Check patching levels and update to address known issues. http://www.sun.com/bigadmin/hubs/comms/downloads/updates.jsp#cp1
4. Log a Sun Support Case to have the issue investigated (assuming you have a support contract). http://msg.wikidoc.info/index.php/Submit_sun_support_request
i was able to log in yesterday morning however in the afternoon server has crashed. You need to be very specific about what actually 'crashed'.
Saying the "server has crashed" implies that the entire system (at the hardware/OS level) crashed/rebooted.
If the 'webserver' has crashed then you would be able to access the system via SSH (so the hardware/OS is working) but when you connect to the server using a webclient to get mail, you don't get a connection.
If the 'mailserver' has crashed then you would be able to log into Comms Express or at least see the login page (webserver is working) but one or more components are not working (if you cannot login then chances are there are directory server issues, if there is no mail-tab then this is mail-server issues, no calendar tab, calendar-server issues, no address-book then potentially directory-server issues and so on).
it didn't restart or hung up but web server wasn't running anymore. the last email i received was 3.21 pm yesterday. after i restarted all services today, a few emails were displayed immediately with current date and time (10 am today), however i don't know whether these were emails received while server was 'malfuntioning' or they are some left overs from last seconds of working.If you have enabled mail logging then you can see when the emails were being accepted.
http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtv9?a=view#bgbew
i remember myself running update service on the server yesterday and it looked okay today's morning when i found it finished updating the computer. could this be the reason? did update service stopped web server from running?Which 'update service' are you referring to?
also after i restarted the machine this morning i had to re-run all services all over again. don't they just start automatically upon reboot? what if power fails and my APC UPS shuts machine down and then boots it back when power regains?You need to configure the various components to start-on-boot using /etc/init.d/* scripts. This is a standard system-administration task.
pls help me as i am new guy on the block and want to stick to Sun products but don't want to be put off by some mysterious errors and instability of such a great software package which CommSuite defintiely is.At this juncture I recommend that you investigate Solaris 10 administration training. The issues you have described aren't necessarily isolated to just CommSuite but are more standard system-admin tasks.
Regards,
Shane.

Server Time and Local Time (Dreamweaver) Off By 1 Hour

How can I get Dreamweaver to show me the correct time stamp on my files on the server and my local machine? When I telnet into my server, the date and time stamp on all files is correct. My server time is set properly to ET (GMT-5). My local machine's time is properly set. I asked my sysadmin if PureFTP has any timezone settings and I was told by the sysadmin that all my server times and timezones are accurate. My sysadmin said that Drwamweaver is the culprit.
I have lived with this for a long time, but it is extremely annoying and I would like to fix it.
I searched high and low in the Dreamweaver option settings for some sort of timezone setting or offset -- found nothing.
Has anyone experienced a 1-hour out-of-sync issue between a file's actual time stamp on the server and what Dreamweaver shows it as in the Remote/Local Files View?
Thanks.

During Daylight Savings Time.
http://forums.adobe.com/message/3545349#3545349
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Os x 10.8.3 server netinstall and netrestore step by step

Similar Messages

Maybe you are looking for