OS X bount to AD - changing ACL via chmod - problems w space in group name

Solved: use ':' (semicolon instead of space as a separator). *DO NOT ADD EXTRA SPACES!* Example:
$chmod +ai "Domain\domain admins:allow list,addfile,add_subdirectory,deletechild,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity" Folder
$ ls -le
5: group:AGA-MOS\domain admins inherited allow list,addfile,add_subdirectory,deletechild,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity

Thanks so much. I have been looking for this solution for a long time! Sadly, the other topics that had people looking for this solution has been archived, so hopefully I can increase it's visibility with some searchable keywords:
How to add ACL entries to active directory group names that contain spaces, such as Domain Users and Domain Admins.

Similar Messages

Error when changing ACL

I have following problem:
Non admin users in IFS can't change ACL of document (file) - using WebUI.
When I choose ApplyACL command from drop down menu I get an error in HTML script. In line 69:
<SCRIPT> alert("IFS-10406: Invalid AttributeValue conversion (DIRECTORYOBJECT to Java DirectoryObject)"); </SCRIPT>
history.back();
It seems that I have an general problem with this error. Similar error appears when I try to upload file with non admin user via Browse (see: http://technet.oracle.com:89/ubb/Forum36/HTML/000951.html)
null

For a user to modify an object's access control list, they must either be the owner of the document, an administrator, or have been granted the 'Grant' permission to the document. The 'Grant' permission allows users to grant and revoke access permissions for other users.
First, ensure that the non-admin user has been given the Grant permission in the document's current ACL. Subsequently, the user should be able to apply a new ACL to the document.
null

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Error while accessing E2E Change Analysis via SMD

Hi All,
I am having below mentioned error while accessing E2E Change Analysis via SMD.
Error loading template 0TPL_0SMD_CA01_Q0001
Notification Number BRAIN 276
Let me know if you are aware about the solution.
Regards,
Vinit Pagaria

Is the Queries and templates activated completely in BI-content/Client?
Please check the same and if needed activate the queries again by running report :CCMSBI_SETUP_E2E
Also refer to the SAP Note 1342231 - ST: Manual actvtn. of BI Content for E2E diagnostics SP18-22.
Revert for any issues pls.
Thanks,
Jagan

Set Word 2013 Track Changes settings via Registry edits or Group Policy?

Hi
Would anyone know if there is a way of changing Track Changes settings via registry edits or Group Policy (e.g. changing Simple Markup All Markup)? I've had a look in Group Policy Admin Templates and the Registry but cant see relevant
Thanks!

Hi,
The All Markup/Simple Markup selection is controlled by the RevModeShowSimpleMarkup value within the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Options
The value is 0 (zero) for All Markup or 1 (one) for Simple Markup.
If we close all Word instances, and change the value to 1, then start Word, the All Markup option should be selected.
In addition, some track change settings can also be controlled by the GPO settings in the following location:
Administrative Templates > Microsoft Word 2013 > Word Options > Track changes and compare
If you still need further assistance on this issue, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Change value via Iterator

Hi,
i have a code:
Iterator<? extends LatLon> foobar = subsetBuffer.getLocations().iterator();
                while(foobar.hasNext())
                    LatLon coo = foobar.next();
                    LatLon popcoo = XProj.GKSlo2WGS84(coo.getLatitude().getDegrees(), coo.getLongitude().getDegrees());
                    coo = popcoo;
                    System.out.println(popcoo);
                }Where i get iterator and do something with its value (popcoo) and then i want to save that popcoo back to iterator. You know what i mean? I want to change value via iterator.
Line coo = popcoo, doesn't work. How should i do that?

Ivansek wrote:
What if i have a iterator like this:
Iterator<double[]> foo2 = subsetBuffer.getCoords().iterator();
if i say here foo2.next()[0] = 2, the value doesn't write back into that variable.Yes, that change will be reflected in your original collection.
What you seem to be confusing is that in one case you would like to change the collection to contain a different object, while in the other case you want to modify an object that is contained in the collection:
Can i somehow transform double[] data type to Double[]? You can't, except by creating a new Double-array, so you couldn't influence the original object in any way.
Then i could change a value, right?No, there's no difference between double and Double in this respect.

Change password via 3-Tier Desktop Intelligence

Hi everyone,
It would be highly appreciated if you could tell me how to change password via 3-Tier Desktop Intelligence.
Version: XI3.0, XI3.1
Thanks a lot!
Lisa

No problem.
And for a work around you can have users
login directly to the CMS (2-tier)
change password
then close deski
as long as they know the difference they can then login to deski 3-tier with their new password.
Another option would be to
lookup the user account in CMC
in user properties check the box "must change password at next login"
Then even 3-tier users will be prompted to change their password the next time they login
Regards,
Tim

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Change text object format problem..

hello!
when i'm trying to change the format of textobject in skd(using java).
its only change the format of the first object in the textobject.
TextObject p2 = new TextObject();
p2 = (TextObject) allobj.getReportObject(8);
TextObject p2old = (TextObject) p2.clone(true);
FontColor p2c = new FontColor();
p2c = (FontColor) p2old.getFontColor();
p2c.setColor(Color.RED);
roc.modify(p2, p2old);
anyone know why?
thanks

Did you ever solve this?
I don't know if my problem is similar to yours, but here's what I'm trying to do:
When you have multiple lines/paragraphs in a text object, each can have it's own horizontal formating. Any ideas how these can be changed independently via RDC?
When I change the property HorAlignment on a TextObject it changes it for all the paragraphs, but in the CR designer you can modify each independently.

IChat 6 changed group name to Facebook but keeps reverting to Buddies, an fix for this?

I want the group "Buddies" to be named "Facebook", I have no problems changing it, it just won't stick for more than a few minutes at a time before
it reverts back to "Buddies" again.
I find this very annoying, is there a fix for this?
NB: I have tried pretty much everthing I can think of, I hope someone here will have the answer I'm looking for.
TIA
andrew

Hi,
Most likely this is a second Login issue.
It can depend on where you are logged in and with what app and the abilities and priorities that login has ((which somewhat depends on Screen Name /Buddy list type)
AIM Accounts (Any Screen Name that logins in to AIM)
These can have Multiple Logins including a web Log in (web SIte) an AIM Express login, another App and /or another computer. (The web site Login could have default Login period as long as two weeks if you don't specifically Log Out)
So in this case when you change anything via one login the other "Corrects it" due to the constant feedback for both logins.
One Exception if the "Group" called Recent Buddies
In iChat 4 and Above this "group" can be turned On or Off display-wise in the Accounts part of the iChat Preferences.
It holds names of people that have contacted you that are not in the Buddy List itself.
The List is held at the AIM servers and you only have Read Access (You cannot delete people from this list unless adding them to the Buddy List itself)
It used to be possible to Delete the whole group but I have not tried this for a while (Since iChat 3)
I have not tried to rename it but I doubt that it can be.
Multiple Login Effects
When you login in to AIM twice, particualrly in iChat on two computers or Different apps on the same computer, you have two Buddy List telling the AIM servers who is in the Buddy List and what the groups are that they are in.
Although Adding something is easy and will appear in the other Buddy List (such as a new Buddy or a new Group) editing Groups or deleting Buddies is almost impossible.
Jabber Acounts (Facebook, Google and other Jabber Logins)
Logging in to the Google Site (the Gmail Web page or iGoogle pages) where chat is available has the same priority as the iChat App. Whichever was the last login will then tend to take preference.
Most Jabber apps can alter the Priority
This measn your Home computer, Work Cmputer and phone for instance can have different priorities set so messages get sent to the "right" one at the right time.
If your Login is not the highest Priority one then you are unlikely to be able to edit any Group names or Delete Buddies.
Obviously for most people with Google IDs the issues is being logged in to the web site.
As Facebook is also a Jabber server with a web site login available this should be considered as well.
Check both Google and Facebook's default Login time if you don't ever Log Out as a specific action.
(Quitting the page does not Count)
Very few Jabber servers have Web Site Logins (Jabber Australia does as the only one I know of).
I am not aware that you can access the Chat options from those that do (check them individually)
However second logins via Adium or ProteusX may well effect things if they are set to higher priorities.
8:51 PM Thursday; August 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have had an iphone 3, 4, 4S, and now a 5. Every picture I have ever taken is saved as "photo". How do I change the auto naming format to a more sequential name?

I have had an iphone 3, 4, 4S, and now a 5. Every picture I have ever taken is saved as "photo". How do I change the auto naming format to a more sequential name?

There is no way to change this.

My hp failed to start it says, A recent hardware or software change may be the problem.

my hp failed to start it says A recent hardware or software change may be the problem. It gives the option of Launch start up repair or Start windows normally, it freezes after clicking any option. What can i do?
My pc is a Compaq Presario CQ62-216DX Notebook. It also says on the screen, Description: fix problems that are preventing windows from starting.

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to change Group-name of custom step-type?

Hello,
i´m using TS4.1 and miss a input-parameter which was avaiulable in TS3.5.
I have some labview-vis which should be TS-teststeps and they all shoul be placed in a group.
Do do this i open the "Types" and select one of my created types. The i rightclick the step and select properties.
In the tab "Menu" i can set a name for the step BUT the parameter to set the Group is no more available?
This was also in the Tab Menu in TS 3.5 but now in TS4.1 there is only Item-name.
Where can i set the Group-name od my steps?
Thx
Message Edited by OnlyOne on 06-10-2008 08:14 AM

Hi!
Now you can go in the Insertion Palette in TS 4.1 (the Step Palette on the left side) and right click on Customize... (see attachement)
There you have the menu where you can change the group for all steps in the palette.
So now you have the possibility to change, create and move groups inside your palette.
Best regards
Ken
Attachments:
Customize.jpg ‏85 KB

How To Change Order of Email Addresses in Address Book / groups / Mail?

Many records in my address book have multiple email addresses.
No big deal but I wonder if there is a way to tell Address Book / Mail which address to pick as the default.
For example I send a litttle news email one a week to a group of contacts. I want to send this email to people's personal -- not business -- email address. I've created a group in Address Book and type that group name in my Mail to line and the group pops up. But a few of the records pick the corporate address and I have to go in and change those addresses.
I just tried editing one record ... I deleted both "work" and "home" addresses from a record. Then reentered them "home" first, "work" second. But when I closed the edit Address Book listed them in the original order (maybe alpha).
Any ideas?
Thanks

jayessemm wrote:
I wonder if there is a way to tell Address Book / Mail which address to pick as the default.
Address Book: Edit > Edit Distribution List…

OS X bount to AD - changing ACL via chmod - problems w space in group name

Similar Messages

Maybe you are looking for