OS X Server 3.0.1 freezing when updating from previous version

When I try to open server after upgrading to 3.0.1 the window cames up saying Server is being updated on this mac, but after 3 hoursi  is still stuck (SEE SCREENSHOT BELOW) I have rebooted but still TNA.
Anyone have a clue?
Thanks

Microsoft Outlook has been a longstanding issue with this behavior.
As for changing the settings, here's how I usually do this.   The postconf -e command shown over in that earlier thread will likely require tweaking as Mavericks has moved the configuration file.   You'll need to add the -c switch with the current configuration file location to the postconf command, as Server.app has stashed away its own copy of this file.
sudo postconf -n -c /Library/Server/Mail/Config/postfix
sudo postconf -c /Library/Server/Mail/Config/postfix -e "smtpd_helo_restrictions = permit_sasl_authenticated reject_invalid_helo_hostname reject_non_fqdn_helo_hostname"
Which will allow (only) authenticated users to bypass the HELO checks.  What's shown here also differs from that earlier thread as I'm not allowing unauthenticated local access here.  Then restart the Postfix server with:
sudo postfix reload
I'll report that article to the  hosts.

Similar Messages

  • Computer freeze when updating from OS 9.2 to 10.2

    Hi,
    I have a grey/blue ibook 366Mhz purchased the summer of 2000. I'm trying to update to OS 10.2. So far, I've updated from 9.06 to 9.2.1 to 9.2.2 (the required sequence), updated the firmware to 4.1.7, and installed third party RAM. I bought the install discs (10.2)from ebay. They are white colored and should work, according to the help files, although the seller did not send me the third "tools" disk.
    When I try to install 10.2, the computer freezes at startup. A grey screen with the apple logo appears, and then the screen freezes and splits.
    The point of this upgrade is to use our Verizon internet service, which requires OS X. If there's a way around that requirement, it would be just as good.
    Does this sound familiar to anyone. Thanks for any help you can offer,
    Andrew

    Andrew:
    You apparently have an Upgrade Version, which requires that you have the previous version installed on the HDD. What you need is the Full Retail Version. Check the picture of the disks posted by ali brown by clicking here However, instead of upgrading to Jaguar, since you have to purchase new install disks anyway, I suggest that you consider upgrading to Panther, which is a lot more powerful and stable OS. Your computer will easily support Panther if it meets that other the minimum system requirements for Panther.
    Panther is no longer available directly from Apple, but you can find the Full Retail Version of Panther, if you shop carefully, at online outlets like FastMac; HardcoreMac, AllMac etc. If you know what you are looking for, read all documentation carefully and ask questions of the seller, you may be able to get
    Panther on eBay.
    I will probably contact the ebay seller, since he gave the impression that he was selling the full retail version.
    I definitely think you should do so.
    Please do post back with further questions or comments.
    Cheers
    cornelius

  • Mail freezes when updating large RSS feed boxes

    This is something I encountered and how I have formulated a work around. I have discovered that Mail will freeze when updating large RSS feed boxes.
    A little history. After discovery RSS and how they work, I began building a collection of feeds. They included feeds from many major news providers. Over the years, the number articles form some of these sources went into the thousands.
    As my database of articles grew, I encountered more severe and more frequent freezes of the application Mail. I began to take the computer off-line in order to work in these files. But inevitably, a situation would arise that would lead to the Mail application freezing.
    Isolation of the issue with Mail and to the RSS boxes within Mail. The freeze would not occur when RSS feeds boxes where collapsed. Also, the freeze only affected the Mail application. Mac OS was not affected and I was able to alway close Mail from with in the Force Quit menu. Also, the Force Quit menu affirmed that Mail was indeed frozen by listing it as also "not responding."
    Work around. To resolve this issue, I first choose to remove the number of RSS feed that I had subscribed to but used very infrequently. Second, I choose to delete old feeds from "never" to "every two weeks" from within the Mail preference menu (RSS sub-menu).
    I think it took a while for Mail to fully delete messages older than two weeks. In fact, when I began deleting whole feeds, it took some time for those feeds to be removed from my mail box tree. Within the Activity Monitor application, I could see that a lot of disk use was occurring, even though the OS was allowing me to continue to use Mail and other applications.
    To assist this process, I took my computer off-line and stepped away from it. Upon my return, the disk use was down to normal, the number of article in many RSS boxes where greatly reduced, and my disk had recovered over a GB of space. Also, Mail seems to be behaving properly, with smooth and quick performance.
    If you found this article, I hope the information provided has been helpful! After a quick search in to previous posts, an entirely similar post was not found. However, others are finding the Mail application will freeze, but not necessary for the same reason.

    Since I don't want to download any attachments from RSS feeds in Mail.app, is there any way to turn off the attachment download once and for all? I also get the beach ball for minutes when an item has a big attachment, and I fear my HD is cluttered with files I don't use.

  • Getting "Server refused to allocate pty" when connecting from ssh

    Hi All,
    I am getting "Server refused to allocate pty" when connecting from ssh to our Solaris 10 8/07 server. I searched in goggle but couldn't find a solution. But from telnet, all users are able to login without any problems. My ssh is default one that comes with sol 10.
    Please help if anybody has a solution for this
    Thanks in advance.

    I am seeing this on a sparc solaris 10. root can ssh in and the console is fine but regular users cannot
    ssh in . Do you have any suggestions for sparc solaris 10? I don't believe the mount suggestion makes
    sense in my environment.
    My root drive crashed so I resinstalled solaris but now ssh does not work. telnet works fine but I don't like
    telnet.
    I get
    Server refused to allocate pty and
    Server send disconnect message
    type2 (SSH_DISCONNECT_PROTOCOL_ERROR)
    "Could not create socket pairs: permission denied"
    Thanks
    Thomas

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??

    When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??
    I want a clean install of 9.1 but would like to keep all my settings, cookies, passwords, dictionary, etc.
    Running a Windows 7 machine.

    There is no need to uninstall the older version. you can update it.. go to help in the menu bar> then take> about firefox >then update the same..You can keep all your items in the new version..

  • I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see spec

    I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6  Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

    Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    Do let us know if it worked.
    Regards
    Rajshree

  • I keep getting errors when updating from the Creative Cloud (49)

    I keep getting errors when updating from the Creative Cloud (49).
    " Update Failed" and when I click on Learn More. The error messages says there is a download error with (49)  I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

    Error 49 https://forums.adobe.com/thread/1491394
    -and https://forums.adobe.com/thread/1353632
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Delayed response of when moving objects in diagram and panel, happend in LV 6, only for vi's compiled from previous versions. any suggestions?

    When I using the mouse to select portion of the diagram or the panel, or when I moving objects- I found that in all the vi's that I compiled from former versions of labview- there is a delay of close to a second to the actual selection or movement of the item. This happens in 2 machines out of 5 that I tested it, and it happened both in windows 2000 and in windows 98. any suggestions?

    Sometimes a video driver issue. Update your video driver.
    Or turn down the video driver hardware acceleration. Right-click an
    empty area of the desktop, choose the Settings tab, choose the Advanced
    button.
    The location of this differs in different versions of Windows.
    Win2000: go to Troubleshooting, and turn down the slider for hardware
    acceleration.
    Win98: I think it's on another tab.
    Mark
    ilan wrote:
    >
    > Delayed response of when moving objects in diagram and panel, happend
    > in LV 6, only for vi's compiled from previous versions. any
    > suggestions?
    >
    > When I using the mouse to select portion of the diagram or the panel,
    > or when I moving objects- I found that in all the vi's that I compiled
    > from former versions of labview- there is a delay
    of close to a second
    > to the actual selection or movement of the item. This happens in 2
    > machines out of 5 that I tested it, and it happened both in windows
    > 2000 and in windows 98. any suggestions?

  • I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

    Hi there MRDLS,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W.

  • What r problems came related ABAP/4 work, when upgration from lower version

    Hi Experts,
    can i know information about upgration.
    what are problems came in ABAP/4 realated development,when upgration from lower version to higher version.
    Best Regards
    jai

    Hi Jayasunderreddy,
    I have gone through an upgradation project, which upgrades from lower version to higher version, there are some problem we could find and here are they:
    1) There were some syntax errors for the variables.
    sloution) we should relate them with new version variables and change them.
    2) There were some FM to be changed according to the version
    3) There were change in BDC also if the objects having BDC then we have to check whether it is functioning well or not, or the best way is to replace the BDC with BAPI, which is independent of version change, so further no problems if at all the version changes.
    Is this information ok..this is what we did for that.
    if you are satisfied then award the points.
    Thanks and regards
    Vipin Das V

  • Music does not sync properly when updated to latest version.  Can see computer but can't play from ipod

    Music does not sync properly when updated to latest version.  Can see on computer but can't play from ipod.

    Hope this helps...
    I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh.  The following steps worked for me:
    1.  Open itunes and connect iphone 5 if not already.  Uncheck all playlists, artists, etc. till nothing is checked to sync.  Then uncheck the sync music box so that all music will be removed from the phone.  Sync iphone
    2.  Eject device. Quit itunes (don't just close). unplug iphone.
    3.  Restart imac, macbook, or PC.
    4.  Restart iphone.
    5.  Now after power up, restart itunes then plug in iphone, check sync music and select music to sync.  Sync iphone
    6.  It worked for me!!!  Good luck.

  • OS X Server 10.4.11 freezes when misc files are being accessed

    This is an odd problem, to me at least. It seems as if I have some files that are getting corrupted, that then cause my 10.4.11 server to lock up when they're accessed. Has anyone else run into this problem before? This server is really only used for file sharing (AFP and SMB), and the majority of the users use AFP. It will lockup and not respond to AFP connection requests, won't allow VNC, and if I'm standing in front of it the mouse will move but it will not respond the mouse clicks or keyboard presses. However, I can still get a ping response.
    I went through a month or so ago and removed all the problematic files I could find, but now the issue is back in a separate folder. To get the server to freeze, all I had to do was try any action on a bad file (copy, preview, open, etc). Disk Utility reports no permission errors, and the disk itself comes up clean. This is a Megaraid RAID setup if that makes any difference. Any insight on what could be causing these files to become corrupt, and then why they would cause a reboot?

    I never did figure this out so I gave up and migrated to a new server while removing the "bad" files that I found along the way. Trying to copy the files when booted from the CD using Terminal would even lock up the machine.

  • Late 2007 MB Freezes when waking from Sleep after Lion Upgrade

    I have a Late 2007 MacBook that I recently upgraded from Snow Leopard to Lion.  Since the upgrade, the computer occassionally freezes when waking up from Sleep (putting it to sleep by shutting the screen).  Sometimes, I will see about 1-2 seconds of activity (i.e. AIrPort icon searching for network), but then the screen will turn black and the computer will restart.  Other times, I actually get a kernel panic. 
    I never had this issue with Snow Leopard, and it seems to happen more often if I try to use the computer (i.e. move the mouse or press a key on the keyboard) immediately after I open the screen and while it's still waking up.  By being patient and giving the computer 5-10 seconds to wake up, it seems to only freeze about 1 out of every 7 times when waking up, but it's stil frustrating to not know whether or not I'm going to lose my work anytime I put the computer to sleep.
    From other issues that I've researched, I've disabled Bluetooth completely (which reportedly fixed some similar issues), but I still had periodic freezes even with it disabled.
    The only thing I can think of that might be contributing to a weird hardware issue is that the AirPort card died on me a few years ago, and I had to replace it with an AirPort Extreme from a Late 2007 15" MacBook Pro (I'm pretty sure the model of the card I put in is AR5BXB72, although I could open my computer back up to verify if that would be helpful).  Snow Leopard seemed to be perfectly fine with that card, and Lion is ok for the most part (WiFi works perfectly fine), but I'm wondering if I need to update/change any Kexts for that piece of hardware.
    Here is one of the kernel panic reports from about 2 weeks ago:
    Sat Jan 19 20:56:41 2013
    Machine-check capabilities (cpu 1) 0x0000000000000806:
    family: 6 model: 15 stepping: 10 microcode: 146
    Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz
    6 error-reporting banks
    threshold-based error status present
    Machine-check status 0x0000000000000004:
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0xf200004000000800 valid
      MCA error code:            0x0800
      Model specific error code: 0x0000
      Other information:         0x00000040
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
       Error overflow
    IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
    IA32_MC5_STATUS(0x415): 0xf200241010040400 valid
      MCA error code:            0x0400
      Model specific error code: 0x1004
      Other information:         0x00002410
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
       Error overflow
    panic(cpu 0 caller 0x2cf3cc): "Machine Check at 0x00dfa4c8, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x8001003b, CR2: 0x55cfe000, CR3: 0x2b84c000, CR4: 0x00000660\n" "EAX: 0x559edc20, EBX: 0x072db000, ECX: 0x00e0c428, EDX: 0x00000000\n" "ESP: 0x0010be00, EBP: 0x0010be68, ESI: 0x072d9000, EDI: 0x072d1280\n" "EFL: 0x00010006, EIP: 0x00dfa4c8\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x818d98 : 0x2203de (0x6b08cc 0x818db8 0x229fb0 0x0)
    0x818dc8 : 0x2cf3cc (0x6bde94 0x6bdfc8 0xdfa4c8 0x12)
    0x818f38 : 0x2cf409 (0x818f70 0xde 0x6bdfc8 0x1)
    0x818f58 : 0x2e6182 (0x818f70 0x0 0x0 0x0)
    0x10be68 : 0xdfa9a2 (0x72d9000 0x0 0x10bea8 0x22fb7f)
    0x10be88 : 0x666bb6 (0x72d9000 0x72d1280 0x75b2904 0x663d5e)
    0x10beb8 : 0x67cb5f (0x72d1280 0x0 0x7295080 0x0)
    0x10bef8 : 0x1ae3691 (0x72d1200 0x0 0x72d1200 0x0)
    0x10bf28 : 0x1b03351 (0x7277500 0x0 0x0 0x55)
    0x10bf48 : 0x1b0e7a3 (0x55 0x2d0d29 0x0 0x1313d70)
    0x10bf78 : 0x69ca2d (0x71c8680 0x0 0x71e3180 0x55)
    0x10bf98 : 0x2ceba4 (0x55 0x10eb710 0x4 0x0)
    0x10bfd8 : 0x2e570e (0x10eb710 0x2c5db0 0x0 0x2c5e0b)
    0x10eb808 : 0x527e2f (0x6c42c8 0x19 0x80cc82e 0x10eb868)
    0x10eb878 : 0x5286a9 (0x7513aa0 0x10eb8f0 0x743a004 0x0)
    0x10eb8d8 : 0x32b069 (0x10eb8f0 0x0 0x0 0x0)
    0x10eb918 : 0x322e68 (0x74fabc0 0x6c42c8 0x0 0x10eb978)
    0x10eb948 : 0x32920c (0x74fabc0 0x6c42c8 0x0 0x10eb978)
    0x10eb988 : 0x32c81b (0x804bf3c 0x10ebae0 0x804bf3c 0x10ebb28)
    0x10eb9b8 : 0x308afb (0x74fabc0 0x10ebae0 0x804bf3c 0x0)
    0x10ebc28 : 0x54d235 (0x72803e0 0x0 0x880 0x804bf3c)
    0x10ebc58 : 0x307d0e (0x73dbb04 0x72803e0 0x880 0x804bf3c)
    0x10ebc88 : 0x321fb2 (0x74fabc0 0x0 0x880 0x804bf3c)
    0x10ebca8 : 0x316802 (0x74fabc0 0x10ebd60 0x0 0x1)
    0x10ebdd8 : 0x317478 (0x5f607c0 0x1 0x0 0x0)
    0x10ebf78 : 0x5f3c2a (0x7564828 0x10846394 0x804be80 0x7f81cd0)
    0x10ebfc8 : 0x2e60a7 (0x10846390 0x0 0x2c7d1b 0x10846390)
          Kernel Extensions in backtrace:
             com.apple.driver.AppleACPIPlatform(1.5)[C5484D26-28D3-4DA8-B2C0-7A3EB8F38BD5]@0 x1b01000->0x1b56fff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[5EC48FA0-6225-414F-ABAB-A898F91B7E15]@0xa8700 0
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
             com.apple.driver.AppleAPIC(1.6)[5BEB4F30-F328-4086-9502-DE97ED5448F2]@0x1ae2000 ->0x1ae5fff
             com.apple.driver.AppleUSBEHCI(5.1)[607ED327-88BE-4ABF-A666-AD1D02B3D03E]@0xdf60 00->0xe15fff
                dependency: com.apple.iokit.IOUSBFamily(5.1.0)[ACF52DAA-24ED-4520-A3A1-4B4C3C53C8A5]@0xcae0 00
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
    BSD process name corresponding to current thread: mds
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacBook3,1 (Mac-F22788C8)
    System uptime in nanoseconds: 32336204274368
    last loaded kext at 206807220187: com.apple.filesystems.smbfs    1.7.2 (addr 0xaa8000, size 249856)
    last unloaded kext at 211045878088: com.apple.driver.USBCameraFirmwareLoader    1.1.0 (addr 0xdaf000, size 24576)
    loaded kexts:
    com.logmein.driver.LogMeInSoundDriver    1.0.0
    com.apple.filesystems.smbfs    1.7.2
    com.apple.driver.AudioAUUC    1.59
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleSMCPDRC    5.0.0d8
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleIntelGMAX3100    7.0.4
    com.apple.driver.AppleIntelGMAX3100FB    7.0.4
    com.apple.driver.SMCMotionSensor    3.0.2d6
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.driver.AirPort.Atheros21    431.14.10
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleUSBTrackpad    227.6
    com.apple.driver.AppleUSBTCKeyEventDriver    227.6
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.driver.AppleIntelPIIXATA    2.5.1
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.iokit.AppleYukon2    3.2.2b1
    com.apple.driver.AppleUSBUHCI    5.1.0
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.kext.triggers    1.0
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOATAPIProtocolTransport    3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOATAFamily    2.5.1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.8
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    And here is an odd one from just the other day (this is the entire panic report when viewing it in Console):
    Thu Jan 31 18:37:05 2013
    Machine-check capabilities (cpu 1) 0x0000000000000806:
    family: 6 mPdaei: c(CPU10):5 snepresing: sive1pr0c smsori(rotodhie C:U did n14 a6know edge Intenrupts)tTLeB slate(0x1R
    Any thoughts??

    ....anyone have any ideas?

Maybe you are looking for

  • Warning messages in Disk Utility

    When running Verify or Repair Disk Permissions there are several Warning messages I receive. Examples are: Warning: SUID file "sbin/unmount" has been modified and will not be repaired; Warning: SUID file "bin/rcp" has been modified and will not be re

  • How to make a christmas newsletter with pictures

    how do I make a christmas newsletter with pictures all around.  I want to arrange the pictures.  the collage does it but I want to place them.

  • SP-Status of Software components not visible in Maintenance Optimizer

    Hi 1.     I have created a Server, Database, Systems for an Nw2004s Enterprise Portal server. That is the main relevant component is Enterprise portal 2.     Then I assign the system to the logical component  as a production system to the SAP Netweav

  • Firefox won't run once I download it

    I went on the Mozilla website to download Firefox. I clicked "Run" on the popup box and it downloaded. I then clicked "Run" again to begin installation, and nothing happened. The little box went away, and there's no Mozilla files on my computer. I tr

  • How to install new graphics card

    Hi everyone. I have an intel mac pro and i want to install my pci express ati xtx 1900 card into it. It fits in the slot nice and snug but requires the 6 pin power cable to run the card. I have no idea where this is inside the mac and need help getti