OSB Alerts - Email Content
Hi All,
Is it possible to control ALL of the content that is sent out on an OSB Alert (email)?
We have a scenario where if there is an error occurring in a certain proxy, then we handle the error, but also send an email alert to a specific group of email recipients.
The content of this email includes some properties that are easily configurable (Alert Summary, Severity, Alert Payload etc), but also some that appear to be automatically generated (Service Name, Server Name , Domain Name etc) that are probably not required for the specific audience.
Example email that is generated:
'Service Name: ServiceManager/proxy_services/ManageNotifications/ServiceName
Alert Summary: Oracle Service Bus Alert
Alert Destination: ServiceManager/alert/DefaultEmailAlertDesitination
Severity: critical
Alert Timestamp: Tue Oct 23 11:46:28 BST 2012
Server Name: ServerName
Domain Name: DomainName
Alert Payload:
For The Attention of XXXXXX - XXXXX Team,
Please find details of XXXXXXXXX:
XXXXXXXXXXXXXXXXXXXXXXXXXXXX'
Is there any way to control these / remove the unwanted properties?
Thanks in advance,
Jamie
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
Change URL of the alert email from content organizer processing
I am receiving email from the content organizer processing timer jobs. I want to have custom url in the email content. can I change it? Please suggest some ideas
Thanks, Saravanan PRSHi ,
Thank you for your post.
I reviewed this and there is no OOTB way to change what goes in alert within Content Organizer feature, at least not without writing some code.
Here is a similar thread, you can use as a reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f717a6f3-9558-4c39-9020-f9483b7073d5/how-to-edit-modify-customize-email-notifications-from-content-organizer-drop-off-library?forum=sharepointadminprevious
Best Regards,
Lisa Chen -
Using SharePoint 2010 Foundation.
I have an Issue list configured to send an email to the assigned-to owner (List Settings | Advanced settings | E-Mail Notification = Enabled). I have since added columns to the Issue list. All of the data from my columns appear in the email alert but the
newest additions show up at the bottom of the list in the alert email instead of in the column order I have defined (List Settings | Issue Content Type | Column Order). However, if I click the "Mobile View" in the alert email I received, the Mobile
View does have the items listed in the column order.
Why are these different and how do I get the email alert to match my column order?Actually the view which you recieve requires the column ordering to be the way you prefer. So whatever is your default view, change the column orders and then check the email alerts.
Alpesh Nakar's Blog
Alpesh
Just SharePoint Just SharePoint Updates
SharePoint Saturday India Online
Nov 20 2010 Contributing Author
SharePoint 2010 Unleashed
MCTS: SharePoint 2010 Configuration
MCITP: SharePoint 2010 Administrator -
Hi,
I have created an alert catagory and using it for SAP and PI errors. The alert catagory is working fine.
I am able to receive the alert mails for SAP in the mail id maintained in SU01(Email option is selected their).
My id is maintained in SCOT as well.
I am not able to receive the alert mail for PI errors, in my email (maintained in SU01).
I am receiving the mail in alert inbox for PI errors.
I can see the alert log in "Alrtdisp" and "sxmxalrt_logreader"
I ran the RSALRTTEST report and received the alert email.
But when I am trying to fail an interface from RWB and test, I receive email only in my alrt inbox, not email.
Note: I am not able to see the mails in SOST
Please help!!!
PoojaPooja,
is your user in the ALRTCATDEF defined as a fixed recipient?
Did you configure an alert rule in the runitme workbench?
See also sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/88/21bc3ff6beeb0ce10000000a114084/content.htm
and alerting rules and categories:
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
See also Michals great tutorial:
The specified item was not found.
Regards,
Konrad -
PI alert email body generating incorrect URL for message monitering
Dear Friends,
I need some light on the following problem, really appreciate your inputs and help
1.)
From the Runtime Work Bench, we are getting email into company out look express when there is an error in interface execution . It is working good.
But in side email content , we are getting URL Link for message moniter to view the failed PI message in RWB, this url is not working to display the failed message because of space before message id.
Can you please help me to know, at run time where this URL gets generated in the email, or where we can correct this URL in PI ?
2 .) In development and quality the URLs generated are completely different other than host, port.
IN COMPANY OUT LOOK EXPRESS EMAIL AS FOLLOWS:
From: RUNTIME WORKBENCH SERVICE [mailto:XIRWBUSER Company.com]
Sent: Sunday, November 20, 2011 11:48 AM
To: TestUser1;TestUser2
Subject: PI Message Failure XID: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create ;BusService_GM
Importance: High
Alert ID: ##24685##
Date: 20.11.2011 _ 11:47:41
System: XID 200
Error Category:
Error Code: OUTBINDING.CO_TXT_OUTBINDING_NOT_FOUND
Adapter Error: No receiver agreement found for sender ,BusService_GCOM to receiver ,BS_SAP_CRM_
Message ID: A9F89891139F11E1C22D0000065C4DE6
Sender Service: BusService_Test
Sender Interface: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create
Receiver Service: BS_SAP_CRM_PCA
Receiver interface: SI_CRMXIF_PARTNER_SAVE_M03_To_CustGenericModel_In_Create
Adapter Type:
Rule Name: Alert Rule for Customer Interfaces Inbound
Message Monitor http://abcc.sap.compugra.com:8010/sap/bc/gui/sap/its/webgui?~transaction=*SXI_SHOW_MESSAGE MSGGUID=A9F89891139F11E1C22D0000065C4DE6
Quality Environment url:
Message Monitor http://abcc.sap.compugra.com:51000/mdt/index.jsp?objectName=type=XIAdapterFramework&messageid=005056B0001F02DFB2FABF97C45A9DB3
Thanks and Regards.
SurajDear Rajesh,
The following are the exchange profile parameters for AFW, RWB.
Appreciate your immediate help.
Adapter Framework
parameter name value
com.sap.aii.adapterframework.serviceuser.language EN
com.sap.aii.adapterframework.serviceuser.name XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd *********
Runtime Work Bench
parameter name value
com.sap.aii.rwb.server.centralmonitoring.httpport 8043
com.sap.aii.rwb.server.centralmonitoring.httpsport @com.sap.aii.rwb.server.centralmonitoring.httpport@
com.sap.aii.rwb.server.centralmonitoring.name
com.sap.aii.rwb.server.centralmonitoring.r3.ashost abcc.sap.compugra.com
com.sap.aii.rwb.server.centralmonitoring.r3.client 200
com.sap.aii.rwb.server.centralmonitoring.r3.group
com.sap.aii.rwb.server.centralmonitoring.r3.mshost
com.sap.aii.rwb.server.centralmonitoring.r3.r3name
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr 43
com.sap.aii.rwb.serviceuser.language EN
com.sap.aii.rwb.serviceuser.name XIRWBUSER
com.sap.aii.rwb.serviceuser.pwd ......
Thanks.
Suraj. -
JDBC PL/SQL exception not shown in System Alert email
Hi expert,
The PL/SQL exception caught in the communication channeli do not show up in the alert emails. What could be the reason behind it?
We configured the SXMS_TO_ADAPTER_ERRLINES to capture the error message in alert category and configured the alert rule accordingly also. The system alert mail is show as below:
If that is the PL/SQL error(Adapter Framework exception: null):
Adapter type: JDBC
Error text from the Adapter Engine:
If that is the exception captured in Adapter Framework, not PL/SQL error:
Adapter type: JDBC
Error text from the Adapter Engine: Error when attempting to get processing resources: com.sap.aii.af.lib. util.concurrent.ResourcePoolException: Unable to create new pooled res ource: DriverManagerException: Can not establish connection:: SQLExcep tion: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist IBM AIX RISC System/6000 Error: 2: No such file or direc tory
Is that because the system alert only can print out the detail error message captured in Adapter Framework? Is there any way to capture all of the possible errors in adapter engine?Hi Ruby,
Please use the container variable "SXMS_TO_ADAPTER_ERRTXT" in your alert category configuration to get the error text from Adapter Engine.
The details of the container variable can be found at this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards, Gaurav. -
Modify the email contents when adding a colleague in SharePoint My site
Hi I want to modify the mail that is sent to the person I add as a colleague in mysite.
I want to modify the mail content.
Regards
VinodHi,
According to your post, my understanding is that you wanted to modify the email content for adding colleagues alert.
After some search and research, I have found that It is not
supported way of modifying text/format of email that goes out when a colleague is added.
The text/format is hard coded in a private method (Microsoft.Office.Server.UserProfiles.ColleagueManager class) in an assembly that ships with SharePoint.
For the normal list, we can modify the content by edit the XML file of
alerttemplates.xml. We can find it in the below path.
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML
http://sharepoint.stackexchange.com/questions/26172/can-the-added-as-colleague-email-text-format-be-changed
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
List Alert emails sent from one Application and not another?
I have a farm with two Applications. For some reason, list alerts are being sent and delivered from Application A but not Application B.
Troubleshooting recommendations?
Thanks,
ScottHello,
Check the property of alert for that web application using STSADM. If it is not enable then enable it.
Stsadm.exe -o getproperty -url http://web-App-URL -pn alerts-enabled
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
I can no longer read Japanese email content
Email content from Japanese friends is no longer displaying correctly. When I change the character encoding in the 'view' menu, it changes the display of the data in the subject list only. Help!
The view menu you are referring to is an extension of your web browser and is not supported directly through Verizon. I did find a link below that might provide some insight to your situation.
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/japanese-characters-are-unreadable-in-...
Eric_VZ
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. -
Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT Category, CntRecords
FROM [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
// TODO: Add your code here
Variables varCollection = null;
string message = string.Empty;
Dts.VariableDispenser.LockForWrite("User::Message");
Dts.VariableDispenser.LockForWrite("User::Category");
Dts.VariableDispenser.LockForWrite("User::CntRecords");
Dts.VariableDispenser.GetVariables(ref varCollection);
//Format the query result with tab delimiters
message = string.Format("{0}\t{1}\n",
varCollection["User::Category"].Value,
varCollection["User::CntRecords"].Value
varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
' Add your code here
Dim varCollection As Variables = Nothing
Dim message As String = String.Empty
Dts.VariableDispenser.LockForWrite("User::Message")
Dts.VariableDispenser.LockForWrite("User::Category")
Dts.VariableDispenser.LockForWrite("User::CntRecords")
Dts.VariableDispenser.GetVariables(varCollection)
'Format the query result with tab delimiters
message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh -
How can I print only the attachment without the email content
How can I print only the attachment without the email content. Every time I send to print, It prints the email itself with the attachment- can I cancel that?
Hello Riklama,
When you first open the attachment (e.g. on your phone) than you can mail only that attachment. Works fine with my husbands blackberry.
Elsy -
System monitoring - alert email notification
Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any helpJosef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered. -
Can't locate email content? All of a sudden my email content has disappeared from inside MacMail? The actual emails are coming through but I am unable to view them in the content area! Nothing has been done to have changed this?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Changing the EMail content for a message either failure or success
Hi All,
I need some information about how to change the Email content which was sent by the system which was triggered during process chain. we want to get the subject of the message rather than all the details which are part of default messages like
Log for This Process:
Log of Respective Background Job:
and others.
Since we are trying to send the message to Cell Phones , just need a short message either sucess or failure.
Is there any exit or methid to override this message to a custom message.
Any help in this regard is appriciated.
Thanks on advance.
sreeHi,
I know its a very old post, but I'm facing this issue now.. It would be great if you guide me.
I'm getting the following error
"Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the reported exception is: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 303 seconds
BEA1-01502373650AE964512F
Thanks,
Girish. -
Changing the email Content for the Contact Person Creation
Dear All
We are on SRM 7.0. We need to change he mail content that goes to the Contact Persons of Vendors. These contact Persons are created in SRM for bidding.
How to change the email content?.
Thanks in Advance.
veluHi,
Pl. follow the following steps :-
1. Create smartforms containing your own content to be sent to contact persons.
2. Implement the BADI : BBP_OUTPUT_CHANGE_SF.
3. There is one interface(method) in the above BADI e.g. :change_forms. You have to call smart forms in this interface.
I hope you may achieve your task by following the above steps.
regards
HARSHB
Maybe you are looking for
-
Can i control Itunes on my MacBook Air with my 4th gen ipod without using a
I needed an Apple remote but found it did not work with the mac Air (no infra red)I was in the apple store at the time so the guy set up the homeshare with remote app. BUT!!!! But i was convinced i needed internet or my airport express for that we we
-
Frequently changing label printing requirements
hello there, business scenario ; labels required for shipments, keep changing frequently and going forward this needs to be done in SAP. does anyone know how to address this issue ???
-
Is there a way to find out which transactions are called by first transacti
I'm trying to find out if there is a way to find out for ex: You go to PFCG and put in transaction CO15 What other transactions is CO15 going to need or call. Thanks Joe
-
Auto check box on updateable report?
Forgive me if this is simple, I'm grappling with finding the right terms for my searches. On an updateable report. Is it possible to autoclick the checkbox if they adjust anything in a row? So if I update any field instead of manually selecting it fo
-
Error message when setting up icloud
Trying to set up icloud. Error saying " the maximum number of free accounts have been activated on this iphone. How do I know what accounts are activated?