OSB Project redeployment, Proxy endpoint uri not changed

Hi,
We have a problem when redeploying a OSB project with a new proxy Endpoint URI. When we deploy the changed project, through the OSB console Administration->Import, the OSB deployes successfully but still works with the old EndPoint URI ?
On the disk at <domain_home>/osb/config/core/<project>/PollXYZ.proxy.xml we can see that the old EndPoint URI is still present even though all files have a new modified date. When we try change another property, like "all-headers" the changes are reflected sucessfully when redeployed. So it is only the EndPoint URI that is somehow not changeable?
Any ideas?
TIA

No. url is changeable and it works perfectly fine for us. Are you sure the jar which you are deploying has the latest url for sure.
P.S: Post OSB related queries in SOA Suite forum:
SOA Suite

Similar Messages

Redeploying a project in weblogic SBConsole,endpoint URI doesnt change

Whenever we redploy a project by overwriting the existing one using CONSOLE, the endpoint URI of the business service is not getting updated.
But when we delete the existing one and deploy it,the latest endpoint URI is getting updated.
Why isn't it so in the first case?Can anyone help us out.

Please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15867/import_export.htm#CIHHEJFJ
Regards,
Anuj

My first osb project was stuck because version not matched

Hi,
I tried to follow the steps in Oracle service bus 11g development cookbook chapter 1. I have created a very simple osb project and then tried to deploy it to weblogic server. However, I got the following message:
<Setting transaction '17' as rollback only. Rollback reason:
java.lang.IllegalArgumentException: The jar that is being imported is an unsupported version of the product. The version was 11.1.1.7. Supported versions are: 10.3.0.0.dev2, 2.6.0, 3.0.dev2, 2.6.1, 3.0.dev1, 3.0.0, 3.0, 2.6.dev5, 10.3.0.0, 2.6, 2.6.dev4, 2.6.dev3, 2.6.dev2, 2.6.dev1, 11.1.1.2, 11.1.1.3, 11.1.1.6, 11.1.1.4, 11.1.1.5, 10.3.2.0.dev.1, 10.3.2.0.dev.2, 10.3.1.0, 10.3.2.0.dev.3, 3.2.dev1, 3.2.dev2, 11.1.1.2.dev.1, 11.1.1.2.dev.2,
at com.bea.wli.config.importexport.ConfigJar$SerializedForm.<init>(ConfigJar.java:989)
at com.bea.wli.config.task.impl.UploadJarTask._execute(UploadJarTask.java:47)
at com.bea.wli.config.task.impl.SessionedTask$1.execute(SessionedTask.java:233)
at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
at com.bea.wli.config.transaction.TransactionalTask._doExecuteWithRetry(TransactionalTask.java:162)
Truncated. see log file for complete stacktrace
It seems to me that my project is finally creating a jar file that is incompatible.
How to solve it,
Any idea?
K.

[oracle@soabpm-vm dev_soa_osb]$ java weblogic.version
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050
Use 'weblogic.version -verbose' to get subsystem information
Use 'weblogic.utils.Versions' to get version information for all modules
Please see you can think of anything,
K.

How can I set which projects use Proxy Media and not just change every project?

Hi there
I can see how to change ALL projects to use Proxy Media or Original/Optimised Media
in
Preferences>Playback
But I'm switching between projects a lot and I only want to use Proxy Media on one project, so how can I tell FCPX to only use Proxy Media on that ONE project?
Thanks

Perhaps if apple didn't take back prores LT this wouldn't be as much of an issue.
Pores LT was a great compromise between file size and quality. It produced a fine image for most peoples needs and was 30% smaller.
Hopefully it will be returned soon. I can't imagine why it's not already there. Unless they want to charge for it, ... again..
Have you tried capturing as full res, then change prefs back to proxy, open a new project and import the full res files?
In FCP7 the render pref was separate from the capture pref. is that gone too?
If my idea doesn't work, Surely someone will chime in with a creative work around to this.
And hopefully it'll get fixed soon in an update.
Best,
g

Project Server 2013 Site Owner not changed when Project owner is changed

It seems when a project is created the project site "owner" is set to be the person that created the project. If the project owner is changed then site "Owner" is not updated. This is a problem on several fronts and I am almost
hoping it is an issue with my install.(We are running Project permissions mode)
Use Case 1: A project manager leaves the company and the New PM is added as the new project owner. After addition and publish the site owner remains the same as the original. this means the new pm can't share the site (to a stakeholder who is not in the
ERP) by adding them to the general "Contribute" group or otherwise.
Use Case 2: a planner creates a portfolio project and gets it through the workflow and all. the PM is assigned but can't add other stakeholders without going back to the planner and having them add them to the project site as an owner.
Question: Is this a feature or a bug? Is there a script to do this?
Seems kind of cumbersome and has already produced numerous issues for us.
Tasks

Bob,
Unfortunately, you are seeing the behavior as designed. The Project Site Owner will always be the person, who created the project site (i.e. Project). This is because, after the initial creation, the only groups that are synced are:
<Site Name> Project Managers (Project Web App Synchronized)
<Site Name> Team Members (Project Web App Synchronized)
<Site Name> Web Administrators (Project Web App Synchronized)
The idea here is that, all 'sharing' of the project site will happen via the project schedule/Project Server. Anybody who is part of the Project team, will be given Team member access, and anybody with rights to save that project will be given project manager
acess on the Project site,
This is also good in a way, because, this prevents any license violations, (users who access project sites also should have PWA CAL), that could happen via direct sharing.
Having said that, you have couple of options:
1) Make it part of your process that when a owner changes, the admin (or workflow) manually adds the new owner to the Site Owners group.
2) Disable Project Site Sync, and manage it via the AD Groups (depending upon on your security model).
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

OSB Proxy Service remote Endpoint URI

Hi,
I have configured a new Proxy Service in OSB where the endpoint URI points to a JMS Queue on a remote Weblogic Server. But when I look at the OSB server's log, it is showing the following WARNING message: *'Please ensure the destination is available at the JNDI name QUEUE_JNDI_NAME.'*. Is there any other information that the OSB Server requires in order to consume messages from a remote server's queue other that its endpoint URI?
Thanks in advance for any advise on this.

The problem was that the endpoint URI had two ip:port endpoints (i.e. jms://192.168.1.1:7001,192.168.1.1:7003/...) and the 2nd ip:port endpoint didn't have any information about the queue. So for now, I've removed the 2nd ip:port from the URI and will include it again once the admin for that server sets up the queue within it correctly.
Cheers.

OSB 10g Offline Endpoint URI is not working

We are facing an issue with marking Endpoint URI to offline on unavailability.
Have tried all possible ways to check this issue in environments by making all necessary configurations but somehow the URI's are not being marked out offline.
Please confirm if this is know issue or we missing anything out configurations?
Thanks.

Hi,
There is no issue that I know of...
In my configuration I have state and Offline Endpoint URIs enabled and also monitoring and SLA alerts enabled...
I created an SLA alert that sends me email if an URI gets offline -- Any URI offline on all servers = true
It works for me...
How are you testing? What makes you believe the URI is not being marked as offline?
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Customize OSB proxy endpoint

Hello,
We have a server running OSB and created a simple proxy service. When we access the WSDL it returns the following endpoint.
http://oldname:7001/MyTest/MyProxy
In proxy configuration is only possible changing service endpoint URI from /MyTest/MyProxy. It's not possible setting servername nor port.
Anyone knows where these parameters come from? Maybe hosts? Is possible chaning/setting this server name/port instead of getting from system? I'm asking this question because we already have the name "oldname" in hosts and now we need that this server uses an additional name other than that for OSB.
Thanks
Rogério

Hello Hisaak,
In the previous post I just simplified explanation - we have a cluster setup with two servers and a virtual server name in load balancer called "soadomain". This pool redirects to two servers S1 and S2. The problem is that after install client wants to change the name of the pool from "soadomain" to "osbdomain". The reason why they want this change is because OSB shares these machines with a previous Soa Suite cluster installation and the name change is unavoidable.
My opinion is the same: clients should not take service endpoint from WSDL. The problem is that we created the pool osbdomain, restarted weblogic server and when we call a WSDL from the cluster address it brings the old address in service definition.
In OWSM gateway, for example, I may change the hostname to specify cluster address and redeploy that component, not a hard task.
In Oracle ESB the same: in System Group I may specify the host and port which will be provided to client. Just simple as applying a new setting.
But in OSB? The WSDL in the new URL provides the older endpoint and product documentation does not clarify how this can be changed. As an administrator I don't want to question development approaches, but in this case in particular product does not provide the right address, even if the clients don't take the endpoint from WSDL.
Edited by: user11130232 on 28/09/2009 13:18

OSB : Endpoint URI problem in business service

I have to invoke a http service from OSB where endpoint uri is http://<ip>:<port>/Resource.
At invocation time OSB is adding "?" to the end of URI, in that case http message is becoming like following:
POST /Resource? HTTP/1.1
External service is considering it as a bad request and giving 500 response code with following comments:
Error occured: 500, Cannot find local resource: /Resource?
But I am getting proper response when I am calling from java program with http message POST /Resource HTTP/1.1
It is not possible to change the external system, now how can I solve the problem??
Please help.
Thanks
Afzal
Edited by: uttam on May 2, 2012 9:49 PM

Open your business service and navigate to HTTP Transport configuration page and check what is the http type is enabled.
Look to me its with GET method, change it to POST and re-try.
If the above solution is not helping, try to check the Follow HTTP redirects check box below the Advanced Setting in same page.
Thanks,
Vijay

Unable to poll for files in FTP server using Proxy Service (in OSB Project)

Here are the stepd followed for creating proxy service that should poll ftp server to retrieve files but polling is not happening and unable to see any errors in logs.
1. Created service account by selecting resource type as static and providing the ftp user and password details.
2. Created a New Proxy Service in eclipse
     Tab General - service type as Messaging Service
     Tab Messaging - Request Message Type as Text, Response message type as None
     Tab Transport - Protocol selected as "ftp"
          - Endpoint uri entered in the format - ftp://hostname:port/directory
FTP Transport -Selected "external user" as User Authentication
          - Selected the Service Account thats created in step1/
               - File mMask - *.*
               - Polling Interval 60
               - Read Limit 10
               - Post Read Action - Delete
               - Transfer mode - binary
               - Download Directory - "some local directoy"
               - Error Directory - "some local error directory"
Could any one please help here to trouble shoot the polling issue and correct me if this is wrong approach.
Thanks

Did you configure the FTP adapter which is present in Weblogic server?I think he's using FTP transport in OSB and not the JCA adapter, if that's the case FtpAdapter configuration wouldn't help...
unable to see any errors in logsThat's odd, try to mess up the hostname and see if you get a connection refused on the logs...
It may be a permissions issue, the user you're connecting may not even "see" the files you place there... Try using the same user to create and to poll files...
Cheers,
Vlad

What is the endpoint URI of a proxy service?

Hello, I want to create a SOAP client that will access an ALSB-hosted proxy service, but I don't know the URL needed to get to the web service.
Within ALSB's console, I can easily test the proxy web service but don't know how to access it externally.
On the Proxy Service's configuration page, in the Transport section, the endpoint URI is given as "/default/DoubleItExternalProxy", but when I try to access the wsdl at that uri via:
http://localhost:7001/default/DoubleItExternalProxy?wsdl, I get this message:
Error 500--Internal Server Error
This service is not associated to a wsdl
Although I believe the service must be associated to a WSDL--I have it based on a business service that has its own WSDL. Does anyone know what the browser URL needs to be to get to the WSDL? Using JAX-WS, I need the WSDL to generate the JAX-WS/JAXB artifacts for my SOAP client.
Thanks,
Glen

Hi Glen
You will need to associate your proxy service with a WSDL when you create it (Unfortunetly it can't be changed from Any SOAP to WSDL afterwards).
The proxy does not use the wsdl from the any business services it calls in case there are multiple.
Ryan

Oracle Service Bus - Business Service Endpoint URI - Change at runtime

Hi,
Is there a way of changing/passing the endpoint URI to a Business Service at runtime? The reason for my question is that depending on the content of the message in a Proxy Service that calls this Business Service I may need to change the URI.
Kind Regards,
Adel

Adel,
Is there some use-case limitation that would stop us from using Dynamic routing ?
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135.
DynamicRouting /Dynamic publish can be considered depending on the use-case.
Other option is to use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
Manoj

WLST script to change Endpoint URI

Is it possible to change endpoint URI using WLST. If yes please provide the sample script for this. It is very urgent to implement in my project.
Regards
James

Refer this page for simple java program to change the env variables. http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/javadoc/com/bea/wli/sb/management/configuration/ALSBConfigurationMBean.html (Changing environment values Section) . Sample example explained to change the File URI

[OSB] Offline Endpoint URIs

Hello,
I am confused be the documentation regarding fail-over retries and black-listing of endpoints. I am reading: http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/endpointurimgmt.html
Basically, what I can't understand is the "How to Mark a Non-Responsive URI Offline" part of the documentation at this point: http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/endpointurimgmt.html#wp1079025
1) The documentation shows you how to mark an endpoint offline temporarily and how to do so permanently. But this is done manually by changing the operational settings. Is it possible to do so AUTOMATICALLY? I would want OSB to "black-list" an endpoint after X failed attempts and STOP trying it altogether for Y duration. It appears that this is not possible. However, the text under the "How to Mark an Endpoint URI Offline Temporarily " hints that it actually is: "+_On encountering a communication error_, the endpoint URI status is changed to Offline. When the retry interval has passed and this business service attempts to process a new request, it tries to access this endpoint URI.+". So the "On encountering a communication error..." part makes me believe that this setting is actually what I want. Is it?
2) Assuming that the above is indeed the feature I need, what happens with retries . Suppose I have 4 endpoints (E1, E2, E3, E4) in my business service and I've set my retry count to 3 (in order to try all servers before failing). What happens when an endpoint (e.g. E3) is temporarily offline? Will OSB still make 3 retries and therefore go back to the first "active" endpoint and try two times for that (i.e. E1 ----> 1st retry: E2 ----> 2nd retry: E4 ----> 3rd retry: E1 again)? I would prefer if the number of retries was decreased by one.
Does anybody know how all this actually works?

What happens when an endpoint (e.g. E3) is temporarily offline? Will OSB still make 3 retries and therefore go back to the first "active" endpoint and try two times for that (i.e. E1 ----> 1st >retry: E2 ----> 2nd retry: E4 ----> 3rd retry: E1 again)I think this will be E1 ----> 1st >retry: E2 ----> 2nd retry: E4 ----> 3rd retry: E1 again but only after the retry interval has completed
For 1) I think OSB will do that automatically if you checked that checkbox in the operational settings page of the business service

Log endpoint URI of a Business Service OSB

Hi,
I want to log the endpoint URI of a business service (OSB) that I'm calling from a proxy service. Can anybody tell me how to do this?
Thanks in advance!
Martín.-
Edited by: 876766 on Aug 16, 2011 7:31 AM

In the response (pipeline) you have this attribute: $outbound/ctx:transport/ctx:uri.

OSB Project redeployment, Proxy endpoint uri not changed

Similar Messages

Maybe you are looking for