OSP resource cost debited in 'Purchase Price Variance'

Hi all
Can you help me how to fix the issue of 'OSP resource cost' debited in 'Purchase Price Variance' instead of WIP cost.
Please note that the 'Standard Cost' in resource definition is disabled.
Note that the costing followed is 'Average'.
Thanks in advance for the help.
regards
Raffath

Raffath,
You veriy the rate in both resource window and in P.O, there may be a scope that P.O may be ammended and Resource rate may not be changed, this difference will be affected in PPV account.
Regards,
Jaan

Similar Messages

Purchase Price Variance (Standard Costing) with Intercompany

We are missing Intercompany transactions in Purchase price variance report. Is there a setup which let's us include these transactions to be captured by PPV report
We do have standard costing in all Organizations

Finally got this answered from Oracle Support below is what they said. Does not make sense but atleast we have an answer
In principle the internal requisition hits the interorg variance account which is defined at the shipping network and is different from purchase price variance(PPV) account of the organization. So this is not included in PPV report. PPV report is only meant for purchase orders.
Best practice would be to define different account for PPV and interorg variance. Use PPV report to match PPV account with GL and use material distribution account detail report for Interorg variance.
If the customer defines PPV and Interorg variance account as the same then the workarounds would be :
1) Use material distribution account detail report.
Or
2) In R12 use SLA account balance reports

Report for Purchase Price Variance

Hi,
Is there any standard report for finding Purchase Price Variance between Purchase Order and Material master
regards,
Mallik

Hi Mallik,
There is no std report for Purchase price variance .
But you can check KSB1 , where you can find the Price difference which is going to your PRD account .
You can find out your PRD G/L account .
Now go to KSB1 . In the cost element field give the PRD G/L account .
After executing change the layout as per your requirement .
Now you can see the Pur Price variance for the particulat material for the PO .
Otherwise you need to develop a customised report .
Hope this helps .
regards

Standard SAP report for purchase price variance

Hi All,
I need to know if there is a standard SAP report that shows the purchase price variance.
Thanks,
Regards

Hi Ritika,
There is no standard report available to compare purchase order price cost and standard cost of a material.
You can check if FBL3N helps to resolve your purpose or not. Or else you have to make a customized report with the help of ABAP'er on the informations based on the following tables.
MBEW
        EKKO
        EKPO
        EKBE
       MKPF
        MSEG
        KEKO
        KEPH,
        BKPF
        BSEG
        LFA1
Thanks,
Vasanthan

Report to view Manufacturing variances - Purchase Price Variance

Report to view Manufacturing variances - Purchase Price Variance, Materials Usage variance, Labor Usage variance.
for above reports if standard tcodes are available in SAP please provide them or else explain how to develop these reports in SAP
Spandana

Hi
You can use KKO0 reports...
For that, assign your Cost Comp Str in OKN0 and choose Product Group = material group.. This is one time config
Execute KKRV monthly after all period end setttlements are over... Then you can view KKO0 reports
br, Ajay M

Purchase price variance

Hi
I want to to drill down the purchase price variance.Say I have PPV of 10K. I want to drill down to details of 10k.How to proceed.What is the transaction code for that?
Thanks in advance.
SN

Hi Satya,
Variances are based around the standard values that are set up in the Material Master file. These standard values represent what it "should" cost to produce (or purchase) a unit of the product. Variances are calculated automatically when settlement jobs are ran in SAP
purchase price variances are caused by a difference between the standard cost in the MM file and the actual price on the purchase order.
The entries will b something like this
Debit Inventory XXXXX
Credit Accounts Payable XXXXX
Credit Price Variance XXXXX
Regards
Genie

Purchase Price Variance Split

hi
how to implemente the Purchase Price Variance
what we need for implement.

Hi,
Goto T.code OBYC and PRD-Cost (price) differences and configure you purchase price accounts.
Thanks,
Rau

Purchase Price Variance Foreign Exchange difference

How Purchase Price Variance Foreign Exchange difference is calculated for material consumed in product costing / material ledger

You need to go to net price at purchase order in local currency. With quantity you'll get the purchase order total price in local currency.
Get the standard price of material master record (which is in purchase order) on MM03 transaction on costing 2 view.
Purchase price variance is the difference between purchase price order and material standard price.
To get this difference in foreing currency, you´ll need to get document date of purchase order, get exchange rate at OB08 and find both prices in foreign currency; after that get same way the variance.
Hope that helps,

PPV Purchase Price Variance - PeopleSoft

What is the minimum that a purchase price variance will update an item?
We have several items that are priced in the 10th and 100th of a penny for large volume items.

Hi Satya,
Variances are based around the standard values that are set up in the Material Master file. These standard values represent what it "should" cost to produce (or purchase) a unit of the product. Variances are calculated automatically when settlement jobs are ran in SAP
purchase price variances are caused by a difference between the standard cost in the MM file and the actual price on the purchase order.
The entries will b something like this
Debit Inventory XXXXX
Credit Accounts Payable XXXXX
Credit Price Variance XXXXX
Regards
Genie

Purchasing price variance report

dear all,
I have to generate the purchasing price variance report...
Report to analyze and compare the following data elements from the invoice and standard cost:Period Actual average price per unit.YTD actual average price per unit o current year.YTD actual average price per unit o previous year.Current (actual) standard cost per unit.
The tables to be used Ekko/ Ekpo/Ekbe.
Best regards

Setting of Chartrange and Labelrange (1)
.ChartRange = .Range(start, end)
.ChartRange = .Range(.Cells(row#,column#), .Cells(.Rows.Count row#, column#))
.ChartRange = .Range(.Cells(1,1), .Cells(.Rows.Count-1, 5))
0
1
2
3
4
5
0
Label Range
** Header names not to be exported to chart **
1
4
3
-8
2
4
3
-7
3
5
2
-6
4
7
21
-5
5
18
35
-4
6
15
25
-3
7
20
16
-2
8
0
0
32
2.5
5
-1
.ChartRange = .Range(.Cells(2,1), .Cells(.Rows.Count-1, 5))
0
1
2
3
4
5
0
Label Range
** Header names not to be exported to chart **
1
** data not to be exported to chart **
-8
2
4
3
-7
3
5
2
-6
4
7
21
-5
5
18
35
-4
6
15
25
-3
7
20
16
-2
8
0
0
32
2.5
5
-1

CST amount is debit in the purchase price variance

Hi
We are maintaining std in the materials master
and price procedure as taxinj
While doing migo, the CST amount is debit in the purchase price variance and credit in the GR/IR RM,
We need to debit the CST amount in the in the Raw material account
what are the settings i need to carry out Plz give suitable suggestions.
in tax code we are not maintining any G/L account for the CST
Edited by: K. Raghuram on May 19, 2009 12:48 PM
Edited by: K. Raghuram on May 19, 2009 1:02 PM

Hi Raghuram,
I think,the only possiblity for this to happen is due to the standard Price in the Mterial Mater you are using.
Means in the Material Master ,the Price key is a standard pricing.
So ,when ever you do a GRN ,the PO value will go and hit the Material account upto to the Standard price maintained in the material Master.
if the amount is more than it ,then amount difference will hit the Price variance account.
so in your case ,the CST is inventorised one ,i believe.. so that is the reason it is behaving so.
if there is somethig else required.provide a clear insight of the Problem.
Regards
Anjanna

Purchase price variance in subcontracting order

Our customer has the following scenario:
     Purchase account is posted with the value of stock subsequently purchase price variance is a legal account
     Material ledger is active
     Inventories are managed with standard price for each material code
     Latin method management of inventories post stock values on managerial account
In good receipt with a subcontracting order, in case of purchase price variance, legal account of purchase price variance is posted generating a wrong reconciliation between managerial and legal posting.
Example
The subcontractor is a co packer that assembles material A to produce material B
Material A has a standard price of   3
Material B has a standard price of     5
If Co packer fees have a value     of     2 no purchase price variance occurs during good receipt, as a matter of fact :
(Co packing fees) 2 + (Material A) 3 = (Material B) 5
Else if co packer fees have a value of 3 a purchase price variance of 1 occurs and itu2019s posted using transaction key u201CPRDu201D. On FI the following document is posted:
Legenda : L stands for legal account , M stands for managerial account
(L) Co packing Fees                                         3
(L) Invoice to receive                                     3
(L)Purchase price variance                            1
(M) Consumption Material A                           3
(M) Stock Material              A                            3
(M) Stock Material               B                            5
(M) Production Confirmation Material B       6
In this scenario Purchase price variance should be a managerial account, but transaction key is PRD and changing the account would affect every posting.

This is the answer from OSS
Dear Customer,
the system works as designed.
When Material Ledger is activated, price differences are always
generated under the circumstances you have described. The reason is
that when material ledger is activated, price differences must not be
included into the stock changes value, otherwise the system would
not be able to calculate an actual price.
When Material Ledger is activated, the customizing setting
for handling price differences in the subcontracting process has no
effect.
Best regards,
Santiago Lorite
AGS Primary Support, Business Suite & Technology u2013 Logistics

Purchase Price Variances

Hi,
I am new to SAP. What is the best way to look at all the purchase price variances for a whole month?
Thanks

HI,
Use transaction FBL3N and enter the Purchase Price variance GL Account with period for month and execute....
Regards,
Chintan Joshi

Purchase Price Variance Report completes with error status

Dear Members,
I am using R12.1.3 Vision Instance.
When I ran the report Purchase Price Variance Report, it completed with an error.
The error message is :-
Enter Password:
REP-1212: Object 'F_h_report_date' is not fully enclosed by its enclosing object 'Body'.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1212: Object 'F_h_report_date' is not fully enclosed by its enclosing object 'Body'.
Can any one please guide me in resolving this issue?
Many thanks in advance.
Regards.

HI,
Check the below references, it would address your issue
Purchase Price Variance (Xml) Post Process Failed [ID 1341213.1]
Report Error Rep-1212: Object 'F_report_date' [ID 567886.1]
Regards,
Ivruksha

Configure GRIR account and Purchase Price variance

Hi,
Please explain steps involved in GRIR configuration and Purchase Price Variance
Thanks for help. Points will be given

You need to set up the automatic postings:
IMG \ Materials Management \ Valuation and Account Assignment \ Account determination \ Account determination w/o wizard \ Configure Automatic postings
In particular you need to ensure there are settings for the Transaction Event Keys PRD (price differences) and WRX (GR/IR). Drill through and set per:
Valuation Grouping Code (these are set per Valuation Area which is normally Plant level and you can see the settings one step back in config.), General Modifier (if applicable) and for all possible Valuation Classes.
This link is very good, read the top bit for an overview then go to Transaction Event Keys (about half way down) for further info. on these.
http://help.sap.com/saphelp_46c/helpdata/EN/12/1a39516e36d1118b3f0060b03ca329/content.htm
Regards,
Nick

OSP resource cost debited in 'Purchase Price Variance'

Similar Messages

Maybe you are looking for