OSS note 550071 - price for catalog product

Hello All,
the sub OSS note says
If a valid source is assigned to the shopping basket item (for example, an info record or a contract), the price is transferred to the purchase order from the source of supply<b> - unless, the item is created via a catalog and it contains the catalog price.</b>
we require that the ECC cotract price should be picked up while classic PO creation , even though the product is picked up from catalog (which has contract no in the product characteristics).
Now only in one test case we observed that system behaved in our desired way and contradictory to the note.
Does anyone know about any control on this behaviour?
we could not find any.
(we have not implemented BBP_APPEND_ITEM)
BR
Dinesh

Hi
Which SRM version are you using ? What you observed in your test-case ?
<b>Anyways, You can do this easily using any of the BADIs</b>
- BBP_DOC_CHANGE_BADI
- BBP_SOS_BADI
P.S. : Read the relevant standard SAP documenatation in SE18 Transaction.
Do let me know.
Regards
- Atul

Similar Messages

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

    Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation"  Flash was working absolutely fine before, I have no idea why this happened.

    I am having similar problem.  Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message.  So now I can not run Illustrator, Photoshop, or even Adobe Reader.  These are properly licensed for about a year. I get "License for product has stopped working".  Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days.  Was on phone support hold today for over 3 hours before line went dead with no help.  What is up with adobe support?  Can anyone help?

  • OSS Note 386896 (Substitution for call-up point 3) implementation in ECC 6

    Hello Everyone,
    We had implemented OSS Note 386896 (Substitution for call-up point 3 ('Complete document')) in our SAP system (Release 470).
    Now weu2019ve upgraded to ECC 6 and are looking for an alternate solution as OSS 386896 is not valid in ECC 6.
    Suggestions on any solution would be highly appreciated.
    Warm Regards,
    Sushil.

    Hi,
    Please do the below.
    Check the SAP Service market website and search for the OSS note, check the validity for the OSS note, if it is being already applied as a support pack or not,
    Check if the release of the OSS note is valid for your ECC 6. If not then Raise a message with SAP and ask if there is any alternative note for this in the new release. SAP will respond to the query or can extend the validity  of the note.
    Regards
    Shiva

  • How to make Different Price for same product in one Sale Order

    How can i customizing my system?
    I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
    Someone have any suggestions?

    Hi
    you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
    The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
    - you'll need to create a new ítem category copied from the one you´re using and do all assignments
    - add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
    http://scn.sap.com/thread/1693234
    - Adjust your pricing sequence as per new table
    - Maintain specific prices in new table for materials with this new ítem category
    Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
    Regards,
    JM

  • OSS note containing fixes for ITS 6.20 patch 19

    What is the OSS note that tells of the fixes for patch 19?
    Thanks,
    Jin Bae

    Hello John,
    Note 491781 is currently being translated from German to English and should be available in English shortly.  If you have a specific note you are looking for then you could also check that note to see if it has been updated with the corrected patch number for ITS.
    Edgar

  • Last Purchase Price for a product

    Hi,
    I need some here.
    Item A is made up of Item B and C (in production BOM)
    Item B is in production BOM as well and is made up of Item D, E and F.
    I need to calculate the Last Purchase Price of Item A, which is:
    Item C (LPP $10)
    Item D (LPP $12)
    Item E (LPP $20)
    Item F (LPP $30)
    Total Item A LPP = $72
    Any suggestion of what the best approach of doing a query/ a XL report for this?

    Hi!
    1. Define BOM for Item A
    2. Link a Price List for tht.
    3. Update your child items and child price's in a price List.
    4. Click the orange Drop Down Arrow in BOM window.
    5. This will automatically calculate the Item Price for Item A and update the Price List tht linked in it's BOM
    Hope Help u !!

  • Reg..selling price for same product by sea and air

    Hi
    i have a basic question pl explain me
    my client selling the product to customer two ways by sea and air.if they sell the product by sea that is one cost(say Rs 12).If they sell by sea that's is one cost (say Rs 10),for same customer, how we define in SAP.
    Are we create two customer code for same customer or any other setting is there?
    Thanks&Regards
    Selva

    Hi Selva,
          This is can be configure easily,by selecting field in you condition table (V/03),here you need to select your org elements (Ex: sales org,Disb channel,Customer ) and also shipping type (VSART), and maintain the access sequence and condition type.In VK11 maintain condition record for that and finally you need to specify the shipping type in your sales order shipping tab (Air,Sea) according to that the price will pick form record.
             You may not find VSART (Shipping type) in standard field catalog it should be add from Conditions: Allowed fields,once you add it will come to filed catalog.
    Thanks
    Ram

  • How to add "Product Unit" while entering a new price for a product?

    Hi All,
    I recently created a product in CRM.(in web ui)  .Then I navigated to the Price assignment block anc clicked on New.In that under the "rate" heading there is a field "Product Unit" for which I have no value in search help maintained..Now, how do I maintain these values here .
    I used the t-code COMMPR01 from one of the forum answers but could not get much help.
    Could anyone please help me out with this query?
    Thanks!

    Create an Adobe Reader X virtual app as component and add it to the
    other virtual app under component.
    On 20/05/11 11:29, Marc Charbonneau wrote:
    > Hi, I'm really new to ZAV and trying to quickly setup IE7 with Flash,
    > Shockwave& Adobe Reader X.
    > Only Reader 8 and 9 are listed.
    >
    > We have a Reader X conflict with another important application and guys are
    > trying to find a solution. We've been licensed for ZAV for a while now but
    > no one's taken the time to play with it yet. Hoping this ZAV product can
    > help us with this particular Web apps' dependency.
    >
    > Can anyone point me in right direction?
    >
    > Thanks,
    > Marc
    >
    >

  • Different prices for adobe products

    I recently tried the Adone Flash CS3 program. I got along
    with it great and decided that if the price was right I would but
    it.
    I went to Adobe Shop Page and it had a tag which said $699 ,
    not bad I thought, I buy it. To my surprise when I went to checkout
    the price had been transferred to Euro ( I live in Greece) and was
    now a whopping E845 or $1200+ !!! Why can I not buy this product at
    the $ price or is Adobe penalising us for being Europeans. However
    I tried I couldnt buy with the $ price. Does anybody know how I can
    buy with $$$ or for what reason I cant.
    Rob

    I'm in Hong Kong. Same situation with software overpricing.
    Adobe, Amazon and others will not ship overseas, but some US
    retailers will. I got my CS3 suite from B&H Photo Video, a
    truly excellent supplier in New York. I also buy audio and camera
    accessories from them (yes, new York prices are often cheaper than
    Hong Kong!).
    You'll probably have to pay VAT when it comes through
    Customs.
    http://www.bhphotovideo.com/

  • Is the price for your production the same in all apple stores of any country?

    I mean if i buy, for example ipad, in some apple store of Germany, is the price of this ipad would be the same, like in the usa?

    Besides Sales tax vs Value Added Taxes, there are import duties, Corporate Taxes for earnings in each country, and general operating expense for any Apple presents in the country.  I'm sure I overlooked something.
    And currency exchange rates.  A straight exchange rate might come out at 92.63.  You know any company offering a product is going to round that up to 99.95 in what ever curreny the local country uses.

  • SAP CRM 7.0 Standart B2C web Catalog Product prices are not shown

    Hi CRM web channel Gurus,
    We have done all XCM configurations in terms of 'b2c, isauseradm, shopadmin and ipc' components accordingly. Our catalog replicated to TREX successfully that is used ZB2C pricing procedure from ECC all condition replications are well done. On GUI, we can see the ECC condition on the product master data with tcode COMMPR01 unfortunately on the web we can not see the prices of catalog products.
    Moreover after adding  a product to shopping basket through completion of the order process then pricing procedure calculates true price that both seem on the web and tcode CRMD_ORDER in terms of checking out ECC conditions.
    Is there any missing customizing IPC entries on XCM or RFC destination error on Middleware Parameter in terms of SAPCRM_SPC parameters. Could you please help in order to solve this issue?
    all your answers help will be appriciated.
    Thanks in Advance
    Fahrettin

    Hi Mark,
    In the Shopadmin for our shop that we are using IPC pricing for the Product catalog
    That's exactly true that all of the products condition data are shown 0,00 in terms of enable pricing analysis in the XCM this should allow you to see the Condition data that is resulting in the 0,00 price in the webshop. How can I show the true condition data that is resulting without 0,00 accordingly?
    I I have also checked transaction SM53-VMC log display that checked out the logs there is no error log for 1 week on there and the last error log shown below;
    Time Stamp Severity Log Name WP VM Thread Name User Client Session ID
    2010-07-08T13:21:58+02:00 ERROR com.sap.sce.front.base.DataBase 1 0 RFC Server (out-of-process) WEBADMIN 100 SID:ANON:dtycrm7_DCM_00:0mqOnH7mlNxTnsReeHECpnt22v02-0TwoG42AqI1-ATT
    Message: No KB found for arguments: kbId=0 kbLogsysExt=QRTCLNT200 kbNameExt=null kbVersionExt=null productIdExt=0000000000000000000000000000000000000003 productTypeExt=MARA date=Jul 8, 2010 extConfig=no extConfig provided status=2
    Kind Regards,
    Fahrettin

  • OSS notes for MB1B in checking Amount and Quantity depending on the mat. #

    Dear All:
    Where can i download OSS notes in MB1B for  checking the amount and quantity depending on the material number?
    Thanks,
    CHOCO

    Hi ,
    We are not getting what you mean to say.
    But as far my understanding of your query I am giving the reply.
    OSS notes can be download at the tcode SNOTE.
    Pls go to the tcode SNOTE-> GOTO ->DOWNLOAD SAP NOTE.
    here you need to give the sap note number.
    To get this number you first need to search in service.sap.com and find the relevant note that is useful for ur scenario.
    And after finding that note and we need to give this number in SNOTE tcode and we need to download.
    Pls tell me your requirement clearly so that i will try to find a oss note for you.
    Pls get back to us for further assistance . Happy to help you.
    Regards,
    Viveks

  • OSS note for FM ADDRESS_INTO_PRINTFORM

    Hi All,
    Can anyone please provide me OSS note numbers available for FM ADDRESS_INTO_PRINTFORM.
    I want to see OSS notes applicable for printing Countries in address.
    Regards,
    Imran Kundan.

    Better perform (yourself or basis) the search yourself at http://service.sap.com/notes, as the list depends on your exact version/sp level and list of application/add-ons, use keyword BAS_PRINT. And there are MANY notes, already 2 exist for July 2014. You could also start with collective note  35931 - Collective note: Formatting/printing addresses .
    Regards,
    Raymond

  • OSS note  for FD33 T-CODE in ECC 6.0

    Hi All,
      In FD33 T-CODE we have maintained multiple customers.
    Put in customer number, credit control area  and mark Status - enter - environment - reporting -credit master sheet.
    In the output we are getting Payment history for the last customer . But we require the output of all Payment history of all customers.
    Any OSS NOTE is available for the above issue.
    Any help will appreciated.

    Hi All,
      In FD33 T-CODE we have maintained multiple customers.
    Put in customer number, credit control area  and mark Status - enter - environment - reporting -credit master sheet.
    In the output we are getting Payment history for the last customer . But we require the output of all Payment history of all customers.
    Any OSS NOTE is available for the above issue.
    Any help will appreciated.

Maybe you are looking for