OSX Lion Mail and Exchange Server

My ITS person says that OSX Lion Mail "doesn't allow for exchange accounts so calendars etc don't work".
Is this true?
Thanks!

Again, both of you have been really helpful.  Thank you so much.
If you are both still on this thread, I would like to ask about solutions to a space problem:
My primary computer is a MacBook Pro (Lion 10.7.3), where I am running Entourage 2008 (13.1.2).  Because I have limited space on my MBP for housing old emails (under "On My Computer"), I created a server from an old Mac in my office.  Then, using Entourage 2008 from my MBP, I created an additional IMAP account on the old Mac server, with subfolders for "email_2005", "sent_email_2005", "email_2006", "sent_email_2006", etc.  This is where I archive all my old email.  The nice thing about setting it up this way is that I can search any or all of these folders anytime, and from any location, directly from my Entourage 2008 app on my MBP, yet they take up no space on my MBP.
First of all, I suspect there were easier ways to archive off emails from my MBP, but after searching and asking for weeks, this is what I settled on and it has served me well for years.
But now, my old Mac really is getting old and I'm worried it will die at some point.  Plus I'm not thrilled about trying to maintain the server software on this old Mac.
I also have space on a shared drive maintained by ITS, that's backed-up nightly.  This would be an ideal place to house archived mail folders.  Then I could take down the server on my old Mac and not worry about it anymore.  Unfortunately, I have not been able to set up an IMAP account on my shared drive space (I suspect it's against the ITS rules of this drive).
Entourage 2008 does not permit me to designate where "On My Computer" folders are housed (they have to be on the same computer running the Entourage 2008 app).  If I could designate the location of "On My Computer" folders, a simple solution would have been to just locate them on the shared drive and I wouldn't have to bother with creating additional IMAP accounts housed elsewhere.
Questions:
1) Does Outlook 2011 or Lion Mail permit designating the location of local files (off my primary MBP) for archiving emails?
2) Is there a simpler solution to archiving emails off my laptop, but that would also allow them to be conveniently searchable from within a mail app on my laptop?
Sorry for the long-winded questions.
Thank you again.

Similar Messages

  • LION MAIL and EXCHANGE Problem with Excessive Polling Server Load

    With a few of our apple mail users we are experincing polling on our exchange server which is in the order of 1-13 polls per second to the server.
    We have logged it from 9AM-5PM where it tails off when they go home for the end of the day.
    Has anyone esle experienced this.
    I believe apple mail in lion is still a PULL client using EWS to achieve mail retrieval.
    Well all for now.
    Thanks

    Are you saying that this is a well-recognised issue?
    Can we assume that the reason for not fixing it is that Nokia want people to use Nokia Messaging instead? It came free with my phone and I did try it. It connected & synchronised well but contacts in headers kept appearing in quotes ("") and when I checked my email from my main IMAP client my sent items included incomplete versions of my emails as well as the finished email - as if it was sending drafts.
    I guess I'm sticking with MfE for calendar and IMAP for email...

  • Mail and Exchange server

    Hi,
    I work at an all Windows company, being one of the only Mac there, I almost have no support and I'm stuck. I have Mail.app configured with our Exchange server, I can receive messages but I can only send them to people in our company, any address outside get stuck in the outbox with a message asking to try another server.
    Anybody got an idea how to fix that ?

    I had the same issue but only when I was sending outside of my company's network. The issue was traced to the internet service provider (ISP). Here is what was done to correct for it:
    + Register your email address with your ISP. Contact your ISP and they will walk you through it.
    + When you are connected through your ISP be sure to use their outgoing ISP settings, not the Exchange outgoing settings. In Mail, just below the to and cc you will see a drop down for your various email addresses and drop down for outgoing servers.
    Hope this helps,
    Mike

  • Mail and Exchange Server Name Auto Resolution

    Here's the configuration:
    Exchange 2003 Server mail system (multiple servers)
    Apple Mail under Leopard and Tiger (all of the updates applied)
    Active Directory user accounts (Macs are NOT bound to A.D.)
    When running the Apple Mail New Account configuration using the account type "Exchange", Mail does not seem to want to resolve the incoming mail server field to the proper Exchange server on which the user's mailbox is homed. This causes the setup process to fail. Entourage 04 and legacy mail clients (Outlook 2001, 98 and Exchange 5) all can resolve this with no problem. Since Mail uses WebDAV, I've tried using our OWA URL in that field as well, however that doesn't work either. I can get around this by locating where the user's mailbox is on one of our 8 Exchange boxes and then inputting the exact server name, but having to get that information every time makes things difficult for our field techs.
    This is definitely not a problem with our DNS either as that resolves fine.
    Anyone else seeing this or have a suggestion?

    http://davmail.sourceforge.net/osximapmailsetup.html
    http://davmail.sourceforge.net/faq.html
    http://davmail.sourceforge.net/macosxsetup.html

  • Apple Mail and Exchange Server

    I have Apple mail with many accounts included two Exchange accounts. As soon as my MacBook Pro with ML goes into screensaver the exchange servers disconnects and the list of emails dissapear in the inbox. I need to restart Apple mail and then they are back. I need to to restart Apple mail several times daily. Any ideas or workaround?

    Others at the same issues.
    Here is the thread I was referring to. Hopefully you may find some solutions inside.
    https://discussions.apple.com/thread/4136482?start=0&tstart=0

  • OS Lion Mail: Microsoft Exchange Server Rejects Password

    Hello,
    I just upgraded to Lion and was attempting to set up all of my email accounts into Mail. My Yahoo, AOL, and Gmail accounts all worked fine, but my Microsoft Exchange account did not. When I set it up through Settings originally, everything seemed fine and it had no problem verifying the account. However, when I try to retrieve mail from the Exchange account within Mail, it gives me an error saying that the server rejected the password and then prompts me to enter the password again. I enter the correct password, and the same window pops up over and over again. Has anyone found a fix to this problem?
    Thank you!

    Same Problem here since days and nobody at Apple is picking it up, even though a lot of people experiencing the same issues.
    I Tried deleting all accounts (GMX, Exchange) from Mail 5.0 and create a new one (only Exchange) here: "System Pref". -> "Mail, Contacs & Calendars". Account creation worked, but Mail keeps asking me for the password telling me the server rejected the pw, which is correct (as it worked with the account creation).
    To be honest I'm a little disappointed, having switched from PC to Mac earlier this year and never ran into problems with a PC that took me longer than a day to fix (especially on productive systems!), i start to regret buying a mac...
    Cheers

  • IOS 7 Mail and Exchange server - no more threaded mail messages?

    In iOS 6, Exchange-hosted Mail would show entire message threads, meaning you'd see your reply as a separate message. In iOS 7, it appears that unless the party responds, you won't have an email 'conversation' and you don't know what you've said (or whether your message got through) unless you look in "Sent Mail."
    Mail.app in Mountain Lion does not work this way. There, all messages are threaded.
    Anyone know how to fix this?
    thanks!

    Hello whizzo,
    Thank you for using Apple Support Communities!
    Check out this setting to see if the option to group by thread is turned off or on.
    Mail settings
    Go to Settings > Mail, Contacts, Calendars, where you can:
    Turn on Organize by Thread to group related messages together
    From: iPhone User Guide
              http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Regards,
    Sterling

  • Mail and Exchange 5.5 Server (Round 2) "Rejected Passwords"

    Mail and Exchange 5.5 Server (Round 2) "Rejected Passwords"
    This one is huge, as you may have seen in my other replies to Mail and Exchange Server, I have had this working for over a year no issues.
    Every once in a while I get a user that I setup and all of the sudden their password on the Exchange (5.5) Mail server (running IMAP, OS X Mail app)
    is REJECTED.
    This is just no good, and still to me a Mystery.
    Has anyone seen this?
    It seems there is some corruption happening on the Exchange Server, with the users accounts, preferences, settings.
    The one way to fix it, (that I have seen) and the Windows server guys hate this, but I say too bad, completely move the afftected User's Exchnage e-mail account to another Exchanage NT mail server (they have 6 old NT 4, Exch Servers), once that is done, Mac OS X Mail app connects fine and ha no more issue with Rejecting passwords.
    Any feedback appreciated, thanks,
    [email protected]

    I think I have the same problem without Exchange involved. I have seven different email accounts and two of them are acting like you describe: changes like deleting doesn't reflect on other clients (like mobile phone email client and webmail).
    This also happens with read emails showing up unread so that if the email is been read and deleted same message can appear as new and when that message is deleted I can see two separate items of that same email message.
    Also all marks of reply, forward or flagged are gone when the email show up as new again.
    My service provider said that updates to Mail.app have previously made some big changes to way how it acts with email servers and thought that Mail is misbehaving with my two email systems.
    I am using IMAP protocol with all accounts.
    Thanks for any info and help!

  • Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

    Hi all,
    I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server.  I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars.  We want to take full advantage of OSX Server and to completly get off of exchange.
    What are the best ways to do this?  Are there any tools available to help this process?

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • OSX Lion Mail Server Junk Mail Filter blocks incoming mail from any Yahoo address

    I have yet to be able to use OSX Lion Mail Server's Junk Mail Filter.  I have several contacts who use (free) Yahoo Mail addresses.  Whenever I turn on Junk Mail Filter, even at the Most Cautious setting, any incoming mail from Yahoo.com addresses do not make it into my inbox.  I was told last year by an Apple Enterprise Tech Support contact that "..we're still having problems with that Junk Mail Filter, sorry, just leave it off for now.."  WTH  In the meantime, the good news is I'm not missing any incoming e-mails; but, I'm having to sort through and delete a few hundred spam messages each day. 
    Suggestions?  Thanks in advance

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • Mail with exchange server problem.

    I keep getting a connection failed message asking me to chdeck the settings for my exchange account. I've done this many times and even managed to talk our administrator into checking the settings.
    The error message contains the information that the host xxxx server on port 143 failed. This port may be incorrect, but how do I chage it?
    I have managed to sync with my exchange account and all messages seem present, just can't send or recieve from mail, via exchange server.
    suggestions?????/

    I think the problem of intermittent connections to the mail server is that it may be caused by OSX's firewall, so what I did was to go to System preferences>sharing>Firewall, I opted for a New port, I selected "other" and named it Mail and under the TCP port number I input 25 or you may input whatever you use (ssl requires a different number) or you may do several to cover all the accounts and name them mail2, mail3 etc. if you are wondering what UDP is, its the following: is a connectionless protocol that, like TCP, runs on top of IP networks. Unlike TCP/IP, UDP/IP provides very few error recovery services, offering instead a direct way to send and receive datagrams over an IP network. It's used primarily for broadcasting messages over a network, in other words if you are not sure avoid inputing a number here. So far Im trying it out for stability, I have read many articles and the solution may be as simple as this, its easy to try and non permanent, any one trying this solution please post any experiences. Thanks

  • Deploying Windows Server 2012 and Exchange Server 2013

    Hi All,
    Our Clinet is planning to implement Exchange Server 2013 as an email solution. There is no Active Directory Domain exists in the environment. So, we have planned to configure a Windows Server 2012 R2 Standard as a Domain Controller and Exchange
    Server 2013 Standard would be installed on another Windows Server 2012 R2 Standard.
    The setup would be for 250 users. Please guide me about the Cost of OS + Exchnage and CAL for 250 Users.
    Warm Regards,
    Prosenjit Sen
    Thanks & Regards, Prosenjit Sen.

    Another option would be to consider signing up for Office 365 instead of setting up the hardware and software for such a small number of users.  It will take a long time for the cost of the hardware, maintenance, and support to be less costly than Office
    365, if it would ever be less expensive.  There is a lot of maintenance required for Exchange, so unless your client already has someone experienced in configuring and maintaining Exchange, there is a lot of expense in bringing someone up to speed to
    perform those functions capably.
    Just a suggestion.  I do not work for Microsoft and I have no financial incentive to propose an Office 365 environment.  I just know that if I were running my own business, I would have to be convinced that my business required its own internal
    mail system when there are so many fully functional and capable mail systems available via subscription.
    . : | : . : | : . tim

  • Upgrading from SBS 2008 and Exchange Server 2007 and Adding Modest Failover Protection

    I haven't seen anyone describe this scenario, so maybe it can't be done, but it seems it should work. Can someone either confirm this is viable or set me straight and tell me it's not wise (and if not, why not).
    I currently have SBS 2008 (2008 Server + Exchange Server 2007 + some other components). I use redirected folders so all my user data is stored primarily on the server, and then sync'd with their local harddrives for roaming use and as an additional
    backup precaution. I want to upgrade to a modern version of Exchange (don't care too much about the underlying server OS, but seems like a good time to upgrade everything). I also want to improve the reliability for rapid recovery in the event of a system
    failure. I have always felt nervous with SBS because it only runs on a single server.
    My plan is:
    Install Windows Server 2012 Standard on a new server machine
    Join that new server to the existing SBS domain and sync the users, etc.
    Install Exchange Server 2013 on the new 2012 Server
    Migrate the existing Exchange data and account info to the new server
    Demote the SBS Server and promote the new server to primary DC
    Reformat the old SBS server and install Windows Server 2012 on it too, and join it to the domain as a second DC
    Set up DFS Replication and keep all my user data folders between the two servers (so if one server fails, the other can take over, just not automatically like with a cluster)
    Install Exchange Server 2013 on the reformatted 2012 Server box (so second instance on the domain) and set it up to sync with the first Exchange Server 2013 via DAG (so if either computer crashes, the other can take over for both Exchange Server and file
    services)
    Wouldn't that give me a complete slow-response failover system without the need for setting up a cluster (I know a cluster would provide instant failover protection, but I don't need that kind of speed - a manual switchover in the rare event of a server
    failure is acceptable for us)? I could do this using cheap hardware for each server, because unless both servers fail at the same time, clients can point to the other server. And because it's not a formal cluster, I don't need to buy anything for a shared
    SAN. This seems like such an obvious more cost-effective solution for a small network, I don't understand why this isn't a common approach, which makes me wonder if there is some reason it won't work.
    Any suggestions or feedback? Are Redirected Folders still recommended for users on a Server 2012-based domain?
    Thanks,
    Colin
    Colin

    Ed, thanks again for your help. OK, so here's my updated plan (I realize I should probably check on some of these pieces on the Server group, instead of this Exchange group).
    Constraints/objectives:
    None of the machines are truly server grade hardware, but only 5 people on the network, so performance is generally not an issue, unless a given server is just pegged on CPU or HD due to its own internal maintenance tasks and can't respond to user requests.
    Haven't seen any problems, since upgrading server from 4GB RAM to 8GB a few years ago.
    Not going to buy any new hardware at this time, but do have several unused consumer-grade computers I can deploy as wimpy or moderate servers.
    Main issue is to limit repair time in the event of a system failure (instant failover is not required, but want to be able to restore network functions within less than 24 hours in the event of a hardware failure) and minimize time spent on IT
    maintenance.
    Because of light IT maintenance (not anyone's primary job and we're too small to justify a dedicated IT person or to pay for outside help), almost every touch takes me research and time to re-learn what I haven't done in weeks, months, or years -- so also
    want to keep all IT tasks as simple as possible.
    We philosophically want to invest now for the next 5 years and avoid ongoing cloud fees (so zero interest in Windows Server Essentials with Exchange Online)
    A little nervous about using VM's, just because I never have before, but I do respect that's probably the right way to do many of these things...
    Currently I have SBS 2008 (Windows Server 2008 R2, Exchange Server 2007, WSUS 3, all with latest SP's, also includes SharePoint and other stuff, but I don't really care about most of it) on a single 8GB consumer grade system, which functions as a file
    server and Exchange server. We use Redirected Folders and Offline files for all users, which works great for us and provides additional file redundancy (if server goes down, all of each user's files are also on their own machine and they can even continue
    to work just fine w/o the server, losing only ability to send and receive e-mail). It has been sufficient, but I want to upgrade our version of Exchange and I am nervous that if that current one server fails, it would take me a long time to restore everything
    from backup, easily many days, especially if I need to buy any replacement hardware. It is RAID1, so a single drive failure is easy to handle, but that's the only hardware redundancy for the current server.
    New Plan:
    Install Windows Server 2012 R2 Standard on a new modest machine (16GBR RAM, Core i7, 1TB RAID1 (may upgrade to 3 or 4 TB), 256 GB SSD boot drive, this had been my old personal computer)
    Join that new server to the existing SBS domain (2008 R2/Exchange 2007), make it a DC, sync the users, etc.
    Install Windows Server 2012 R2 Standard on a wimpy computer (4GB RAM Core i3 processor), leave it as a member server
    Install Exchange Server 2013 on the wimpy new 2012 R2 Server (and nothing else, this will be dedicated to Exchange to make the most of such a wimpy machine)
    Migrate the existing Exchange data from the old SBS Exchange 2007 server and account info to the new server
    (or should I just create new accounts and copy the data from the user end through Outlook -- is that safer and cleaner than attempting any kind of server-level Exchange data migration?)
    Demote the old SBS Server and promote the new 16GB server to primary DC. Now it's OK to take the old SBS server off the network.
    Reformat the old SBS server and install Windows Server 2012 R2 on it too, and join it to the domain as a second DC (and possibly DCPROMO it to be the main server)
    Install Exchange Server 2013 in a VM on the reformatted 2012 R2 Server box (so second instance on the domain for Exchange redundancy) and set it up to sync with the first Exchange Server 2013 via DAG OR set up another physical wimpy member server and install
    it there. In any case, do NOT install Exchange directly on either DC.
    Set up DFS Replication or a Failover Cluster (still need to research this, but I had planned on DFS, thinking Cluster required shared drive, but Ed corrected me on this) between the two DC's for redirected files and keep all my user data folders between
    the two servers. We don't need automatic failover, like with a cluster, a manual switch would be acceptable, but if no additional cost or risk to clustering the two DC's, then the auto-failover protection that provides would be better than DFS.
    I think this incorporates all of your points, Ed. Does this sound right now? What's your advice on #5 (how to best migrate user data)?
    Thanks so much for all your help,
    Colin

  • Send mail to exchange server with TLS

    Hi,
    last month I enabled an oracle wallet TDE for creating encription for TS.
    Today, development team needs to send mail to exchange server with TLS.
    So I found this procedure on oracle support Doc ID 1323140.1
    My question is, can I use the same wallet to send mails from db?
    The Oracle Database  11.2.0.3
    Or I need to implement a different type of wallet with certificate?
    Is there, in this case,  a procedure step by step?
    I have never implemented that and I'm very confused....
    Thanks in advanced

    Hi, I have implemented a new wallet with certificates (for test SMTP.gmail.com) and i'm tryied to use this procedure:
    DECLARE
    mailhost VARCHAR2(64) := 'smtp.mydomain.it';
    sender VARCHAR2(64) := '[email protected]';
    recipient VARCHAR2(64) := '[email protected]';
    wallet_pwd VARCHAR2(64) := 'welcome1';
    wallet_loc VARCHAR2(64) := 'file:/etc/ORACLE/FRMSSYST/SMTP/';
    user_name VARCHAR2(64) := 'HDC021319';  -- alias for '[email protected]'
    user_pwd VARCHAR2(64) := 'password';  -- password of [email protected]
    mail_connection utl_smtp.connection;
    BEGIN
    -- Make a secure connection using the SSL port configured with your SMTP server
    -- Note: The sample code here uses the default of 465 but check your SMTP server settings
    mail_connection := utl_smtp.open_connection(
    host => mailhost,
    port => 25,
    wallet_path => wallet_loc,
    wallet_password => wallet_pwd,
    secure_connection_before_smtp => FALSE);
    -- Call the Auth procedure to authorized a user for access to the mail server
    -- Schemes should be set appropriatelty for your mail server
    -- See the UTL_SMTP documentation for a list of constants and meanings
    UTL_SMTP.helo(mail_connection, mailhost);
    UTL_SMTP.STARTTLS(mail_connection);
    UTL_SMTP.AUTH(
    c => mail_connection,
    username => user_name,
    password => user_pwd,
    schemes => 'LOGIN');
    -- Set up and make the the basic smtp calls to send a test email
    utl_smtp.helo(mail_connection, mailhost);
    utl_smtp.mail(mail_connection, sender);
    utl_smtp.rcpt(mail_connection, recipient);
    utl_smtp.open_data(mail_connection);
    utl_smtp.write_data(mail_connection, 'This is a test message using SSL with SMTP.' || chr(13));
    utl_smtp.write_data(mail_connection, 'This test requires an Oracle Wallet be properly configured.' || chr(13));
    utl_smtp.close_data(mail_connection);
    utl_smtp.quit(mail_connection);
    END;
    This procedure, works fine if I try to send an email to smtp.gmail.com (I tried first with gmail with appropriate certificates), but now, when I try to send an email to the local enterprise Exchange server  I get this error:
    ERROR at line 1:
    ORA-29279: SMTP permanent error: 503 5.5.2 Send hello first
    ORA-06512: at "SYS.UTL_SMTP", line 54
    ORA-06512: at "SYS.UTL_SMTP", line 140
    ORA-06512: at "SYS.UTL_SMTP", line 439
    ORA-06512: at line 35
    Thanks in adavanced

  • Does anyone know if OS X Lion will support Exchange Server 2007?

    I'm trying to find out if OS X Lion will support exchange server 2007. I cannot find any information regarding this on the web so I'm trying here. The only information I can find is that Lion supports exchange 2010 but nothing about 2007. I hope someone can help.
    PS. I had to post here as there isn't a OS X Lion community yet. Sorry if this isn't appropriate.

    Nobody knows that could tell you.  Exchange server has some support under Snow Leopard's built-in Mail client, as well Microsoft Outlook (part of Microsoft Office 2011 for the Mac), as well webmail support through several web browsers for the Mac.    Any Intel Mac, which Lion runs can also run Windows in virtualization.  See my FAQ* on those options if none of the options above work in Lion:
    http://www.macmaps.com/macosxnative.html#WINTEL
    I'm sure by the end of July there will be a more definitive answer, assuming Apple keeps to its set date.

Maybe you are looking for