OT: FTP on IIS6
Yes, it is linked to DW - I can't upload any files from DW
(or any other FTP
program).
Background: Server 2003 Standard, running IIS 6.0.
I've set up a website, and copied a few test files to it over
the LAN;
everything works fine, and if I access the server via it's
internet address
it all still works (tested by a colleague in the US).
I want to set up FTP so I can upload files remotely using
Dreamweaver.
The files are setup as follows;
FTP Sites
--> Test Site
Properties:
IP Address: (All Unassigned)
TCP Port: 2101
Anonymous connections is Unchecked
Home Directory is located on this computer, at 'E:\test'
Permissions Read, Write and Log Visits are all checked.
Directory Security: all computers will be granted access.
When I look at the Permissions tab, the user (testadmin) is
shown as having
Full Control. This user is also a member of the computers
Administrators
group.
When I FTP using Dreamweaver, I just get the error message
'index.htm - an
error occurred - cannot put index.htm. Access Denied. The
file may not
exist, or there could be a permission problem.'
If I FTP from the command line, it shows the correct banner
text for this
ftp , then when I enter the password it gives me the error
'530: user
testadmin cannot log in, home directory inaccessible. Login
failed'
I can *get* files through FTP, I just can't put them. :-/
I'm stuck now. I don't know if I'm an inch away from a
solution, or several
miles away and travelling in the wrong direction. All I want
to do is upload
my files to the server...
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
UK
"PeteC" <[email protected]> wrote in
message
news:[email protected]...
> I've set up a website, and copied a few test files to it
over the LAN;
> everything works fine, and if I access the server via
it's internet
> address
> it all still works (tested by a colleague in the US).
>
> I want to set up FTP so I can upload files remotely
using Dreamweaver.
just a suggestions, you might want to restrict access to the
FTP site except
when coming from specific IP addresses.
>
> The files are setup as follows;
>
> FTP Sites
> --> Test Site
>
> Properties:
> IP Address: (All Unassigned)
no, you should have this set to only the IP address of the
site. This would
be using the internal IP you've set the website to - i.e., if
your external
domain name maps out to 255.123.456.789, this is not what you
would enter
in. There has to be an internal IP, it could be something
like 172.16.13.1
or 192.168.1.5 - it should be in the drop down list in IIS.
This is
definitely mandatory if you're hosting more than one site on
that box.
> TCP Port: 2101
> Anonymous connections is Unchecked
> Home Directory is located on this computer, at 'E:\test'
> Permissions Read, Write and Log Visits are all checked.
> Directory Security: all computers will be granted
access.
no - do not allow all computers. You really should lock this
down to
specific IP addresses. If your site is in a DMZ, find out
what IP you
connect via (you should be able to look that up in Event
Viewer - look for
when you logged in and it should give you the IP) and add
that to the list.
If you connect from home, hopefully you've got a fixed IP
address you can
use in here. If it's set to "all access" you're gonna have
people trying to
break in all the time.
> When I FTP using Dreamweaver, I just get the error
message 'index.htm - an
> error occurred - cannot put index.htm. Access Denied.
The file may not
> exist, or there could be a permission problem.'
Is your company using an ISA server? If so, check to make
sure that outbound
FTP access is not set to read-only. If it's your company's
policy to make
all FTP read-only, you're gonna have to get them to create an
exception rule
in the ISA server for you.
Also make sure that your FTP host line in DW lists the
*internal* IP address
of the site followed by the port number you're using (since
it's a
nonstandard port).. i.e., like this: 172.16.1.1:2101
> If I FTP from the command line, it shows the correct
banner text for this
> ftp , then when I enter the password it gives me the
error '530: user
> testadmin cannot log in, home directory inaccessible.
Login failed'
>
> I can *get* files through FTP, I just can't put them.
sounds like what i've mentioned above - a Proxy or ISA server
rule is making
outbound FTP read-only.
Similar Messages
-
Hi,
My operating code DirectoryEntry ftpSvc = new DirectoryEntry ("IIS :/ / localhost / msftpsvc"); foreach (DirectoryEntry entry in ftpSvc.Childern) { ...},
in IIS6.0 work properly, but in IIS7.5 throws COMException exception under: The specified path cannot be found I installed all II 6 compatibility items, I have disabled user control authority, and tried "msftpsvc" also "FTPSVC" or "FTPSVC1"
. Nothing is working. It is working fine for W3svc and not for ftp sites alone
Can you please suggest a solution?Hi Santhoshkba86,
Actually this forum is to discuss the VS IDE, Since this thread is related to the IIS FTP site, like this thread:
http://social.msdn.microsoft.com/Forums/en-US/49703f19-8d27-4f90-9fb9-45905810d4b1/iis-ftp-site-creation-and-management-using-c?forum=csharpgeneral
I suggest you post this issue to the IIS forum:
http://forums.iis.net/default.aspx/41?IIS+7+and+Above, and there you would get dedicated support.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Delete file from an FTP folder
Hi expert,
I wanna know if it's possible delete with abap command a file from a FTP folder.
I mean, there is a ftp folder periodically filled with excel files. An ABAP program read this folder and the files content must be moved in a SAP Table. Aftre this, I must delete excel files with an abap command write in the same abap program.
Thanks a lot
Michele Garofalo1) read directory with fm EPS_GET_DIRECTORY_LISTING
2) process table dir_list
and 3) finally delete files with
abap command: DELETE DATASET dsn.
hope that helps
Andreas -
Hi All,
I have a requirement where I need to delete a file from the FTP server. How do I do that?
Thanks in Advance.
Regards
JaspreetHi,
refer this link,
[ABAP solution to implement FTP transactions |http://wiki.sdn.sap.com/wiki/display/Snippets/ABAPsolutiontoimplementFTP+transactions]
Regards,
Vijay -
How to ASR 9k auto backup to external FTP server
How to take auto running configuration backup when use commit command in asr9k .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf
But auto backup not happening .following errror showing after every COMMIT command.
( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
Manually I able to take Running-configuration backup through ftp int same lacation (
ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .Please help .I have not personally seen this issue before but you may find verifying your config helpful.
SUMMARY STEPS
1. configure
2. show running-config
3. describe hostname hostname
4. end
5. show sysdb trace verification shared-plane | include path
6. show sysdb trace verification location node-id
7. show cfgmgr trace
8. show configuration history commit
9. show configuration commit changes {last | since | commit-id}
10. show config failed startup
11. cfs check --> Verifies the Configuration File System (CFS)
However I did notice the following:
Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf. Notice the preceeding '/'?
Thanks -
How can i do scheduled automatic backups to an ftp server in ios xr?
Hello guys! As the title says im looking forward to automatically back up my running config on a cisco CRS-1 to an FTP server. I was only able to find this config example:
Configuration commit auto-save filename ftp://A.B.C.D/myconfig.txt
This allows me to save my config to an ftp server everytime i use commit on the device. Now i want to know if there's a way to automatically save my configs everyday at 00:00 and also include the date and time in the name of the file so i don't overwrite the existing files in the ftp server.
I dont want to use any tool i just wanna know if what im asking is possible via CLI commands. I would greatly appreciate your help with this subject.
Regards,
DavidNot sure if this script will work on a CRS, but try this:
archive
log config
logging enable
hidekeys
path tftp:///$h-
write-memory
time-period 10080
Explaination:
There are two ways to save your config to your remote station:
1. When someone saves the config; and
2. At an alloted time period, expressed in 10080 (weekly for me). -
Error when scheduling WEBI report to FTP server
Hi
We are getting error "destination directory error. CrystalEnterprise.Ftp: 550 Requested action not taken" while scheduling WEBI report to FTP server.
Any help would be appreciated
Regards,
AnisaHi All,
I want a run my report once by scheduling, so i provide a time interval for scheduling a report
start date/ time : 11:38:AM 10/30/2011
end date/time : 11:43:AM 10/30/2011
after completion of end time....report is failed and fetching an error
Error : Object could not be scheduled within the specified time Interval
Any solution for resolving this error -
Error while FTP ing BI Publisher Report
The following Error is occured while FTPing a BI publisher report. The scheduling was running fine for the lase 1 year .But this error is occuring in production schedule of the ftp for the last 2 days.When I do the FTP by 'Run Immediately' manually it works fine.
oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:4621] Document file to deliver not found : /u01b/obiee/OracleBI/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xdo/cache/xmlp7057786.tmp
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1131)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)Duplicate post.
Error is occured while FTPing a BI publisher report
Error is occured while FTPing a BI publisher report
"BI Publisher" is the appropriate forum for such questions.
Thanks,
Hussein -
Error while delivering a report using FTP
Hi,
I am facing an error when i am trying to schedule a BIP Report to a FTP location on a FTP Server.
The error i am getting is shown below :
java.io.IOException: STOR semd data failed.
at oracle.apps.xdo.delivery.ftp.FTPMainConnection.closeDataConnection(Unknown Source)
at oracle.apps.xdo.delivery.ftp.FTPClient.closeDataConnection(Unknown Source)
at oracle.apps.xdo.delivery.ftp.FTPDeliveryRequestHandler.submitRequest(Unknown Source)
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToFTP(DeliveryServiceImpl.java:527)
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1481)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:496)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
I am able to ping the FTP host ip and access the FTP. In the BIP Admin--> Delivery ---> FTP
I have given my FTP Server name , HOST , and the Port
Can anybody help me in solving this error? Its a high priority requirement from the Client side.Can you manually, as in command line, connect to the ftp site? Is it ftp or sftp? Single or double authentication?
-
Error while delibvering a report using FTP
Hi
I am trying to publish my report on a shared folder by using FTP server delivery. When the schedule gets run I can see following error displayed in the Publisher:
java.io.IOException: Invalid status of current connection: 0
at oracle.apps.xdo.delivery.ftp.FTPMainConnection.checkUTF8Support(Unknown Source)
at oracle.apps.xdo.delivery.ftp.FTPClient.connect(Unknown Source)
at oracle.apps.xdo.delivery.ftp.FTPDeliveryRequestHandler.submitRequest(Unknown Source)
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToFTP(DeliveryServiceImpl.java:519)
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1417)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Status of teh job is comung as Failed - IO error.Can you manually, as in command line, connect to the ftp site? Is it ftp or sftp? Single or double authentication?
-
Error while deploying a process with FTP Adapter
Hi All,
I am using JDev 10.1.3.3 and SOA 10.1.3.3
I am using FTP Adapter to get a file from a remote location in a empty Process.
I have checked delete files option and using logical directory.
While deploying i am getting the below error.
A problem occured while connecting to server "XXXX" using port "XXXX": bpel_APACSHPREQ940PassThroughBPELOB_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize activation agent.
An error occured while initializing an activation agent for process "APACSHPREQ940PassThroughBPELOB", revision "1.0".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
Please help me out....
Regards
PavanKumarHi Krishna,
Not Working
<definitions
name="GetPSOJapanPassThroughFile"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOJapanPassThroughFile/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOJapanPassThroughFile/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterInboundHeader.wsdl"/>
<types>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary" />
</schema>
</types>
<message name="Get_msg">
<part name="opaque" element="opaque:opaqueElement"/>
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Get_msg"/>
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation
FileType="ascii"
LogicalDirectory="GETPSOPTFILE"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
DeleteFile="true"
IncludeFiles="PSO.*\.dat"
PollingFrequency="6"
MinimumAge="0"
OpaqueSchema="true" >
</jca:operation>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="GetPSOJapanPassThroughFile">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/APACFtp" UIincludeWildcard="PSO*.dat" />
</port>
</service>
<plt:partnerLinkType name="Get_plt" >
<plt:role name="Get_role" >
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Working
<definitions
name="GetPSOPassthroughFile"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOPassthroughFile/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOPassthroughFile/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterInboundHeader.wsdl"/>
<types>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary" />
</schema>
</types>
<message name="Get_msg">
<part name="opaque" element="opaque:opaqueElement"/>
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Get_msg"/>
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation
FileType="ascii"
LogicalDirectory="GetPSOFile"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
DeleteFile="false"
IncludeFiles="PSO.*\.dat"
PollingFrequency="6"
MinimumAge="0"
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
OpaqueSchema="true" >
</jca:operation>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="GetPSOPassthroughFile">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/APACFtp" UIincludeWildcard="PSO*.dat" />
</port>
</service>
<plt:partnerLinkType name="Get_plt" >
<plt:role name="Get_role" >
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions> -
We are a small office network of 3 macs. We are having problems lately - when we try and ftp we are unable to use email or the internet at all. The ftp seems to hog the entire bandwidth. We have found that switching from transmit to cyberduck has been a temporarily solution as it allows us to choke the upload bandwidth to 200 Kbps and we can get internet etc. This has not, however, been an issue in the past - we have been able to use transmit & email, web etc simultaneously. I have checked on the router preference pages and there is nothing that says a certain protocol is given priority. We recently had someone attach a Netgear 10/100/1000 m switch to our router (Netgear DGN 2000) so are wondering whether this has anything to do with anything. Macs plugged directly into the DGN 2000 however also have this issue. If anyone can offer advice that would be really helpful! Would this be a router, ftp software or OS issue?
Thanks very much!Try connecting through a regular FTP client and see
if that works. If not, it is most likely your network
settings. Are you connecting to the correct
portnumber? Are you blocked by a firewall by any
chance?Thanks for the reply !
I'am able to connect to the FTP Server using CuteFTP, which enables us to select Proxy Type, to be either HTTP Proxy or FTP Proxy.
When i select HTTP Proxy in CuteFTP it seems to work fine, but when i select FTP Proxy ,i get the same Connection timeout exception, which is what i get when using (Jakarta FTPCommons ) FTP Client, which is inturn uses Socket to open a connection.
I'am unable to know what difference dose Proxy type has when a Connection is made ?
Regards
jagz. -
Can we do a Secure FTP for an XML file from ABAP when firewall is enabled?
Hi all,
I have a requirement to send an XML file to an External FTP Server which is out of our corporate network and our firewall is enabled.
I have to send an XML file with Purchase Order details. I completed that with the help of this blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2657. [original link is broken] [original link is broken] [original link is broken]
Now I need to FTP the XML file that is generated. How should I be doing this? Can some of help me with this?
I need to do a Secure FTP to the external non SAP server which is out of our corporate network and our firewall is enabled. Can some one tell me if SFTP is possible in ABAP.
This is not a web service. I am working on dropping an XML file in an external FTP serveru2026 I have searched the forums but still in a confusion if weather Secure FTP is possible in ABAP or not when our company firewall is enabledu2026
If some one encountered this situation earlier please help,,,..any help will be highly appreciated.
Regards,
Jessica SamThanks a lot for your valuable suggestions Richu2026
I agree with you Rich that web services would be a better option. But I need to send this file to an external third party and they dont have web services.
They are telling us that either we can send them an XML file or a CSV file in the format that they want. We decided to go with XML file format.
I am done with formatting the Purchase Order details in the format that they want. Now the challenge is that I need to send this FTP file to them and it should be a Secure FTP when our fire wall is enabled,
When you say
1) Run an ABAP program to generate the XML file and put it on the local PC
2) Log into the FTP site via some FTP client, could simply be windows as well.
3) Manually cut/paste the file from the PC to the FTP site.
For Step 1 running ABAP Program can I schedule a batch job?
For Step 2 and Step 3 can I automate it in any other way..if not in ABAP?
Can I advice my company to follow any alternate method in which they can automate this step 2 and step 3u2026if not in ABAP can it be possible in any other way as the third party does not have web services I now have no other alternative.
Please Helpu2026
Regards,
Jessica Sam -
Hi Experts,
I am using the below FM
CALL FUNCTION 'ZSMQ_SEND_FILE'
EXPORTING
zmqifacena = 'ZCAR'
l_parameter_1 = fname
l_filename = ws_dsn
r_parameter_1 = fname
EXCEPTIONS
interface_not_found = 1
interface_not_outbound = 2
logical_filename_not_found = 3
dataset_not_found = 4
ftp_failed = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE e398(00) WITH
'MQ XFER for ACT failed RC = sy-subrc.
ENDIF.
I am getting FTP FAILED error, What could be the problem
pls suggest
Thanks
saiHello Saikar Sai,
The FM 'ZSMQ_SEND_FILE' that you are mentioning is a custom function Module and not the SAP standard one. So you need to debug the code for understanding the cause.
Thanks,
Greetson -
Hi Experts,
We have an FTP program, that will pick up the file on application server, will remane the file & send it to the specified destination.
My query is, I need to created one more file & that needs to renamed to other name, how can I achieve this?
Earliset reply is highly appriciated.
Regards,
S RSyntax Group will tell the system that given file path is of which syntax.
E.g. You have different syntax for UNIX and WINDOWS NT.
You can find out the existing syntax groups in the same transaction.
Regards,
Naimesh Patel
Maybe you are looking for
-
TS3212 apple application support was not found. Error 2(windows error)
Apple Applliation Support was not found. Error2 (windows error)?? what Can I do TO get this fix so I can use itunes?
-
Inspection type 03 and QM order
Dear 1.I am not able to assign QM order QL01 by t code QK01 to my finished product to which in material master is activated for inspection type 03 in material master's inspection set up data QM order text box is missing Pls help me to solve this issu
-
WebDynpro Java: how to remove blank element from Table and Dropdown.
Hi Folks In a webdynpro application, I created a table and witten the below code to populate the table IPrivateDummyView.IFirst_TableElement First_Table_Element = null; First_Table_Element = wdContext.nodeFirst_Table().createFirst_TableEle
-
Photo booth opens and image is black. My iSight is working fine, the green light comes on and when I use AIM it is capable of taking a picture of me. Photo booth just has a problem utilizing iSight for some reason. Help? Thanks!
-
Why won't Apple let a screen recorder on the App Store
Hi why won't Apple let screen recorders on the App Store?