OTL: Additional Input Values on Timekeeper

Hello team,
I have a requirement where I need to have an additional field on Timekeeper form called "Unique Hours". For this I did the following steps:
1. Created this additional input value in the relevant element.
2. Added to element set and ran Generate... process.
3. Created a value set.
4. Registered the input value + value set in Alternate Name Mapping and then with Alternate Name Definition.
5. Also put in the Alternate Names Definition for timekeeper.
After doing this, I can see the new field on the TK screen and enter value in it but it doesnt transfer to BEE.
I need some real help on this please.
Thanks in advance...

Have you defined the mapping component for the new input value and added it to the retrieval process?
--Shiv

Similar Messages

OTL (Additional Input Value) help greatly appreciated

Hi there,
I have a requirement where we wish to use OTL for a front end to a number of allowances which require the population of additional input values on the element. These could be for example miles travelled or the method of travel.
Does anyone know how this can be done?
I am envisaging creating an element with the following input values :-
Hours
Multiple
Rate
Rate Code
Miles
I need the additional field to be displayed on the timecard. Does this require custom timecard templates? How do I make the additional field on the timecard populate the Miles input value when the time entry is transferred from OTL to BEE.
Any advice on this would be very greatly appreciated.
Many Thanks and have a great week
Kev

You need to follow these steps:
1. Add the input values to your Element, check element link, include the element to your element set, run "generate flexfield process" with the above element set.
2. Create mapping components for each of the new fields which you want to show on the timecard to let system know which column these attributes will get mapped to.
3. Add the mapping components to your receiving application's Retrieval and Deposit process.
4. Now modify your timecard layouts to show the additional fields you want to show.
For detailed information, please ,follow the Note:207333.1
Oracle Time & Labor Implementation and User Guide, Release 11i, September 2006

OTL - Adding additional Input Value

Hi,
I am trying to modify the timecard layout to add Rate field. The idea is user should be able to enter Hours and Rate paid. I added a input value 'Rate' as sequence 12 to the element. after this submitted the process 'Generate Flexfield and Mapping information' and enabled and displayed the segements for Hours and Rate in the OTL Information Types DFF.
Now i defined a new context called Rate in OTL Alternate Names DFF and added 3 segments to it. PAYROLL_ELEMENTS, IDENTIFIER and RATE. Defined Alternate Mapping also.Modified the layout through ldt. i can see the field displayed in the timecard layout, though no label for it.
But when i enter a value in this field ( also hours ) and click continue i am getting a error message "you have entered some time information without associating any time with that information.Enter some time for this information, or remove it". When i delete the value in this field leaving only hours it goes through fine. I am modifying the Payroll Layout.
appreciate your help in resolving the issue. I referred OTL White Paper. If you have any other useful documents for this purpose please share with me.
Many Thanks
Chandra

Hi Shiv,
I am trying to display the rate field in place of cost centre on the time card so that user can enter the Hours Type and Rate and then enter the number of hours each day in the week. the below code is added to generate a text field
BEGIN HXC_LAYOUT_COMPONENTS "Payroll Timecard Layout - Rate"
OWNER = "ORACLE"
COMPONENT_VALUE = "INPUTVALUE12"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "WBC_HXC_RATE_PROMPT"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "185"
COMPONENT_DEFINITION = "TEXT_FIELD"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"Payroll Timecard Layout - Day Scope Building blocks for worker timecard matrix"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Payroll Timecard Layout - Rate"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "TEXT_FIELD"
QUALIFIER_ATTRIBUTE1 = "N"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "8"
QUALIFIER_ATTRIBUTE4 = "1"
QUALIFIER_ATTRIBUTE5 = "8"
QUALIFIER_ATTRIBUTE7 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "Dummy Element Context"
QUALIFIER_ATTRIBUTE27 = "Attribute12"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
When i load the ldt and click on Create Timecard button getting the following null pointer exception error. i am copying parts of error message as it is too long.
Exception Details.
oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:896)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:612)
## Detail 0 ##
java.lang.NullPointerException
     at oracle.apps.hxc.selfservice.configui.components.web.TimeBuildingBlock.renderVerticalTBB(TimeBuildingBlock.java:522)
     at oracle.apps.hxc.selfservice.configui.components.web.TimeBuildingBlock.renderComponent(TimeBuildingBlock.java:170)
     at oracle.apps.hxc.selfservice.configui.webui.WebRenderer.renderComponent(WebRenderer.java:355)
     at oracle.apps.hxc.selfservice.configui.components.web.TimeBuildingBlock.renderHorizontalTBB(TimeBuildingBlock.java:362)
     at oracle.apps.hxc.selfservice.configui.components.web.TimeBuildingBlock.renderComponent(TimeBuildingBlock.java:185)
     at oracle.apps.hxc.selfservice.configui.webui.WebRenderer.renderComponent(WebRenderer.java:355)
     at oracle.apps.hxc.selfservice.configui.webui.WebRenderer.renderComponentGroup(WebRenderer.java:508)
     at oracle.apps.hxc.selfservice.configui.webui.WebRenderer.renderRegion(WebRenderer.java:222)
     at oracle.apps.hxc.selfservice.configui.webui.WebRenderer.getCUI(WebRenderer.java:193)
     at oracle.apps.hxc.selfservice.configui.webui.ConfigUIBean.<init>(ConfigUIBean.java:327)
     at oracle.apps.hxc.selfservice.timecard.webui.TimecardCO.processRequest(TimecardCO.java:539)

OTL Timekeeper Form Custom Field map to specific Element Input Value

Hello Everyone,
I have the below requirement.
1. Create a custom field in OTL Timekeeper Form. This field is based on the Element Selected on the timecard.
2. Once the Timecard is transferred to Payroll, the custom field should go to a specific input value of that element.
I know how to perform Step 1 above. But i am unable to find out how i can map the value in custom field to a specific Input value of the element.
Any inputs are appreciated.
Regards,
Jay

Any tips people?
Can this be achieved?
This is what i have done so far.
1. Created a new Value set for the custom field.
2. Created an alternate mapping to map the value set value to InputValue13.
3. Created the alternate name.
4. Added the alternate name to 'OTL Alternate Names' DFF.
5. Added the Alternate name to the 'Preferences'.
Testing:
1. Created a Timecard populating the custom field.
2. Timecard submitted and approved successfully.
3. I verified that the custom field value goes into attribute13 of hxc_time_attributes where the attribute category is the corresponding element (should it be against the attribute category: Dummy Element Context? If Yes, then how to do it?).
4. Then i ran the program 'Transfer Time from OTL to BEE'. This transferred the values into hxt_timecards_f, hxt_sum_hours_worked_f, hxt_det_hours_worked_f. But nowhere in these tables do i see the custom value.
Did i miss any step? I did not define anything in the 'Define Mapping Components' of Deposit/Retrieval Process because InputValue13 is already part of it unter type 'Dummy Element Context'.
5. Since it is not in hxt tables, i did not find it in pay_batch tables too.
Any guidance is appreciated.
Regards,
Jay

How can I stay on the same line when inputting values in the CLI?

The title is a bit vague i know :) but i have this issue which isn't really a problem but it would be better if I can solve it.
Intro)
I've made this simple addition (and more options but thats not relevant) application for kids in my spare time so that they can train their maths in school and compare their results with other students which is saved in the database using the hypersonic DB that comes with the JBoss application server.
Now so far so good, but i'm having an issue with the Scanner (I think, but i doubt its because of the CLI) , when i enter a number or text it works and exceptions will be catched etc but when i press the enter key without anything entered the input value wil be displayed a line below and that's not what I want. I want it to stay in the same line.
Sample CLI output:
bla application
***By: deAppel***
Ver: 31/10/2007
Your name:     deAppel
Your class:     MasterClass
How many sums you want to make? 14
Time: 22:03:27
1: 32 + 40 =     72
2: 38 + 19 =     57
3: 5 + 57 =     62
4: 30 + 20 =     1
5: 57 + 54 =     2
6: 33 + 17 =     3
7: 38 + 54 =     4
8: 23 + 23 =     5
9: 48 + 47 =     95
10: 29 + 55 =     6
11: 48 + 11 =     7
12: 1 + 40 =     41
13: 46 + 35 =     91
14: 23 + 52 =     75
Answer 1:      72     You answered:      72     (good)
Answer 2:      57     You answered:      57     (good)
Answer 3:      62     You answered:      62     (good)
Answer 4:      50     You answered:      1     (wrong)
Answer 5:      111     You answered:      2     (wrong)
Answer 6:      50     You answered:      3     (wrong)
Answer 7:      92     You answered:      4     (wrong)
Answer 8:      46     You answered:      5     (wrong)
Answer 9:      95     You answered:      95     (good)
Answer 10:      84     You answered:      6     (wrong)
Answer 11:      59     You answered:      7     (wrong)
Answer 12:      41     You answered:      41     (good)
Answer 13:      81     You answered:      91     (wrong)
Answer 14:      75     You answered:      75     (good)
EndTime: 22:04:18
Total good: 6
Total wrong: 8
Total sums answered: 14
Final score: 42.857143%
Upload score? (yes/no): no
Compare score from other users? (yes/no): no
Want to try again? (yes/no): no
********Made by: deAppel @ http://www.link removed cause it doesnt matter .com*********
************The application will close within 5 seconds*************
To sum it up for those that don't like to read my post:
1: 32 + 40 = 72
2: 38 + 19 =
whitespace <-- this happens because of the enter
whitespace <-- this happens because of the enter
57
3: 5 + 57 = 62
I want the input to stay in the same line unless you have typed something. I feel silly for not knowing how to handle this.
Hm.. i'll tried to solve it myself but it seems that im unable to do that.
/me takes a quick coffee break and will look at the code again after that *

paulcw wrote:
It sounds like you want either a CURSES implementation (I believe there's one for Java), or just move to a GUI.I was planning to create a GUI for it eventually, but i just wanted to solve this one first and make sure everything works the way i want it too. I'll take a look at the CURSES implementation thanks.

Xcelsius -webservice-input values

Hi Experts,
i have a problem regarding xcelsius dashboard .
i have done a connection between R/3 and Xcelsius using FM and showing the result in the BSP page. it is working.
Now i created dashboard, using web service
here input values are TOLOG, Username and Compif, all are selected single cell on excel.In each input value filed i have a selektion possibility als drop down. By running the dashboard it is not working.
How i can give the input value by running the dashboard so that the selected value appear?
It should work like Webservice test
Thank you in advance

Hi
No there isn't. You have to use additional components like a Spreadsheet or Grid component, or even individual Labels to get the values 'onto' the graphic.
Regards
Charles

ADF JSF Shuttle Component - Additional input fields

Hello,
We're in the process of integrating the nice shuttle JSF component into our application. Our app though requires that before the assignment is done (by moving an item left ->right in the shuttle UI) a dialog window must be opened to allow the user to fill in additional input fields (i.e the targe N-M association table that is populated by the shuttle component, needs those additional fields filled for each new record).
Is there a way to do that with the current shuttle component?
Thanks in advance for any help.
Jordi

ckx,
The components don't require a model reference (i.e. assocaition with a JavaBean). You can access all of the components on the posting page on the server, so you could definitely get all of the values that way. You can build up the tree dynamically as well.
So the short answer is yes :-).
<<KM>>

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Unable to provide input value to InfoObject in SEM-BCS

Hello BI Experts,
I have created an infoobject 'ABC' in BI and have flagged 'With Master Data' and 'With Text'. This infoobject has an navigational attribute 'XYZ'(XYZ also has 'With Master Data' and 'With Text').
When I go to T.Code UCWB(BCS Workbench), I could able to see the infoobject 'ABC' and when I try to create master data for 'ABC', I do not see the input field for 'XYZ'. I want to input values in Infoobject 'XYZ' through this screen(SEM-BCS) and not through BI(right-click on infoobject 'Maintain Master Data). Please let me know, if I am missing anything.

Hi Shekar
I find the ICD setup very 'picky'! If you get one thing wrong, it doesn't work. I have detailed below the steps I usually advise people to tek. Check your setup and see if this helps.
1. Define Plan Type, Compensation Category = Others.
2. Define Plan. Link to Plan Type. Plan Usage = May not be in program. On Not in program Tab - define sequence, currency, enrollment rate (per pay period?), activity reference period (Monthly). Your settings may need to be different. On Plan details tab, enter plan years.
3. Plan enrollment requirements. On the general tab, plan sub tab, make sure the method = EXPLICIT. this allows the user to enter an input value for the ICD. THIS MAY WELL BE THE SOURCE OF YOUR PROBLEM!
Make sure the CERTIFICATION region is UNTICKED. This can also cause ICDs not to work.
ALLOWS UNRESTRICTED ENROLLMENT must be TICKED. Otherwise there is no eligibility to the ICD.
On the rates subregion, make sure the run strt date is set to ENTERABLE.
4. standard Rates form. Make sure the ACTIVITY TYPE and TAX TYPE are entered. Select the ELEMENT and the INPUT VALUE and TICK the ELEMENT AND INPUT VALUE REQUIRED field.
On the processing Information tab - TICK ASSIGN ON ENROLMENT, DISPLAY ON ENROLLMENT and PROCESS EACH PAY PERIOD. Enter PER PAY PERIOD AMOUNT in VALUE PASSED TO PAYROLL and OTHER in COMPENSATION CATEGORY.
Let me know if this works!
Regards
Tim

Input value given on web page is not getting pickedup in event handler

Hi friends,
I have created one simple page in SE80 with program with flow logic option, in which I would like to show business partner details from BUT000 table with the input of partner number. But the thing is the input value(partner no.)which I am giving on web page is not getting picked up in selection in event handler though I am giving input value it is becoming initial while selecting. What could be the reason?
Below I am mentioning the code which I have written in even handler for OnInputProcessing event.
CASE EVENT_ID.
WHEN 'select'.
NAVIGATION->SET_PARAMETER( 'partner' ).
SELECT * FROM but000 INTO TABLE I_but000 WHERE partner BETWEEN partner AND partner1.
WHEN OTHERS.
ENDCASE.
Thanks in advance,
Steve

Hi Abhinav,
I tried with the one you posted. But it is giving run time error as shown below.
Note
The following error text was processed in the system CRD : Access via 'NULL' object reference not possible.
The error occurred on the application server crmdev_CRD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ONINPUTPROCESSING of program CLO24DDFJW575HVAQVJ89KWHEHC9OCP
Method: %_ONINPUTPROCESSING of program CL_O24DDFJW575HVAQVJ89KWHEHC9OCP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Regards,
Steve

Text Entry Box--Advanced Actions--Conditional Statement--Double quotes in literal input value

Hello forums,
I'm new to the forums (and Captivate in general), but I'm having a real problem carrying out a tutorial design and I think you may be my only hope. Let me explain what I want to do and the difficulty that I'm having:
I'm an instruction librarian at a university, and I'm designing an interactive tutorial for English 100 students to complete in order to become familiar with how to search the library catalog. What I've done is taken a screenshot of the catalog search page, made it the background of a slide in Captivate (vers. 6), and placed a text entry box over the search bar in the screenshot. The idea is for the students to conduct a simulated search by choosing one of three suggested search string formulations, and depending on the search string they enter, the tutorial will jump to a slide featuring a screenshot of what the actual search results would look like. The idea is to emphasize the use of keywords over full-sentence phrases, and the use of double quotation marks to enclose multi-word search terms.
So I've set the action for the TEB to "Execute Advanced Actions" and then created some IF/THEN statements in the "Advanced Actions" pop-up window (with action type set to 'conditional'). The script is such that if the student enters the first search option (how does sleep affect college students) in the TEB, the tutorial jumps to 1 slide, if they enter the second option (college students AND sleep), featuring a Boolean operator (AND), the tutorial jumps to a 2nd slide, and if they enter the third option ("college students" AND sleep) with the double quotes around "college students" and the Boolean operator, the tutorial should jump to a 3rd slide. This action script works fine for the first two input options, but I can't make it work for the third search option.
I think that it has something to do with the fact that the third input option features double quote marks, and this seems to throw off the script (I tried a quote-less input value for the third IF/THEN just to make sure that it would work jumping to the 3rd slide and it did), and I'm wondering if anyone has any suggestions as to how I can get around this issue. Again, I need it to work so that if the student enters "college students" AND sleep, with the quote marks and the Boolean operator, the tutorial will jump to a slide showing the search results if those search terms were used in a real search of the catalog.
I'd be extremely grateful for any help that anyone here can give me, we've been trying to make our online tutorials more engaging and interactive (and therefore more interesting), and I think this would be a great way to teach students about using quotes in their catalog searches.
Thank you for your time and consideration.
Andrew Wilk
College Library
UW-Madison

The tutorial is for a "how to use catalog searching" instruction in an undergraduate library session. We use boolean operators (AND, OR, NOT) to combine search terms, ex. to search for books about the sleeping habits of college students, I would enter "college students AND sleep." Because "college students" is a multi-word phrase to describe one concept, I need to put quotation marks around the phrase to prevent the catalog from searching for the individual words separately, so the most correct search becomes ["college students" AND sleep] with quotation marks around only "college students," a user-typed "AND," and the word "sleep" (no q-marks).
A colleague of mine worked out a pretty cool (if complicated) solution that I'll share if anyone is interested. Since the q-marks where the problem, we've set it up so that the TEB validates the response for the search string with q-marks around "college students." If they enter it correctly, the tutorial jumps to the corresponding slide. The attempt # is set to 1, and if the user fails to enter the validated phrase (they misspell or use one of the other response options) then the TEB is set to run an Advanced Actions Script in which the other two options are scripted in IF/THEN statements that cause, when the term is entered correctly, the tutorial to jump to their corresponding slides. We've created another tab of IF/THEN statements that say that if the response is NOT equal to one of these response options, then the slide restarts (technically the slide "jumps" back to itself and starts over) and the user gets another chance to start the cycle over again.
I know this is confusing (I had a really hard time explaining it in words), so if anyone is interested I could make a Jing video when I have some time.
Thank you for all your suggestions

How do I pass input values from a html page to a jsf page

hi,
In my project,for front view we have used html pages.how can I get input values from that html page into my jsf page.for back end purpose we have used EJB3.0
how can I write jsf managed bean for accessing these entities.we have used session facade design pattern and the IDE is netbeans5.5.
pls,help me,very urgent
thanx in advance

Simplest way is to rewrite html page into jsf page.
You can use session bean in your managed bean like this:
import javax.naming.Context;
import javax.naming.InitialContext;
public class ManagedBean {
private Context ctx;
private Object res;
// session bean interface
private Service service;
          public ManagedBean() {
            try{
                 ctx = new InitialContext();
                 res = ctx.lookup("Service");
                 service = (Service) res;
           catch(Exeption e){
}Message was edited by:
m00dy

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can i pass the Input value to the sql file in the korn shell ??

Hi,
How can i pass the Input value to the sql file in the korn shell ??
I have to pass the 4 different values to the sql file and each time i pass the value it has to generate the txt file for that value like wise it has to generate the 4 files at each run.
can any one help me out.
Raja

Can you please more elaberate., perhaps you should more elaberate.
sqlplus is a program. you start it from the korn shell. when it's finished, processing control returns to the korn shell. the korn shell and sqlplus do not communicate back and forth.
so "spool the output from .sql file to some txt file from k shell, while passing the input parameters to the sql file from korn shell" makes no sense.

Unable to enter Input value for an ICD

Hi All,
I have created an element XXX which has two input values "Pay Value" and "Class". The class has the values 'A','B','C','D'. I have created a plan and set up the rate In the calculation method I have chosen "No Standard values used".
Now when I try to assign this ICD plan to the user in the Miscellaneous plan I am not able to enter the car class. Can someone help me with this.
Thanks
Shekar.

Hi Shekar
I find the ICD setup very 'picky'! If you get one thing wrong, it doesn't work. I have detailed below the steps I usually advise people to tek. Check your setup and see if this helps.
1. Define Plan Type, Compensation Category = Others.
2. Define Plan. Link to Plan Type. Plan Usage = May not be in program. On Not in program Tab - define sequence, currency, enrollment rate (per pay period?), activity reference period (Monthly). Your settings may need to be different. On Plan details tab, enter plan years.
3. Plan enrollment requirements. On the general tab, plan sub tab, make sure the method = EXPLICIT. this allows the user to enter an input value for the ICD. THIS MAY WELL BE THE SOURCE OF YOUR PROBLEM!
Make sure the CERTIFICATION region is UNTICKED. This can also cause ICDs not to work.
ALLOWS UNRESTRICTED ENROLLMENT must be TICKED. Otherwise there is no eligibility to the ICD.
On the rates subregion, make sure the run strt date is set to ENTERABLE.
4. standard Rates form. Make sure the ACTIVITY TYPE and TAX TYPE are entered. Select the ELEMENT and the INPUT VALUE and TICK the ELEMENT AND INPUT VALUE REQUIRED field.
On the processing Information tab - TICK ASSIGN ON ENROLMENT, DISPLAY ON ENROLLMENT and PROCESS EACH PAY PERIOD. Enter PER PAY PERIOD AMOUNT in VALUE PASSED TO PAYROLL and OTHER in COMPENSATION CATEGORY.
Let me know if this works!
Regards
Tim

OTL: Additional Input Values on Timekeeper

Similar Messages

Maybe you are looking for