OTV vlans routing on the 1 device and switching on the other
Hi there seems to having OTV issues where the odd vlana are on agg1 is showing as routing and even vlan are using the OTV . and on AGG 2 vice versa
my presumption was that using OTV all vlans configured for access would use OTV instead of routing
agg1# show ip route 10.128.105.133
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
10.128.105.128/25, ubest/mbest: 1/0
*via 192.168.28.50, Po5, [19/51456], 4d00h, eigrp-128, external
via 10.101.0.25, [200/51712], 4d00h, bgp-65149, internal, tag 65149
agg1# show ip route 10.128.106.133
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
10.128.106.128/25, ubest/mbest: 1/0, attached
*via 10.128.106.130, Vlan806, [0/0], 4d02h, direct
via 10.101.0.25, [200/51712], 3d20h, bgp-65149, internal, tag 65149
agg2 show ip route 10.128.106.133
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
10.128.106.128/25, ubest/mbest: 1/0
*via 192.168.28.49, Po5, [19/51456], 4d00h, eigrp-128, external
via 10.101.0.25, [200/51712], 3d20h, bgp-65149, internal, tag 65149
agg2# show ip route 10.128.105.133
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
10.128.105.128/25, ubest/mbest: 1/0, attached
*via 10.128.105.132, Vlan805, [0/0], 4d00h, direct
via 10.101.0.25, [200/51712], 4d00h, bgp-65149, internal, tag 65149
how otv adjacency
Overlay Adjacency database
Overlay-Interface Overlay1 :
Hostname System-ID Dest Addr Up Time State
MCC-N7K2-OTV 04c5.a4ea.8b42 192.168.26.54 4d12h UP
04c5.a4ea.93c2 192.168.28.42 4d09h UP
LDC-N7K2-OTV 04c5.a4ea.6042 192.168.28.46 1d22h UP
Does the OTV device need to be physically connected to each other
It seem that vlans at layer 2 do no span across the AGG switches
diagram
You did not configure PBR on the CSS since it does not have this function.
You simply configured static routing.
As so, the CSS will route between the vlans.
If you want a firewall to protect every vlan from the other ones, you should have a one-armed design where the firewall does the routing between the vlans and the CSS is doing the loadbalancing.
ie:
........vlan1
..........|
.vlan2 ---FW----- CSS
..........|
........Vlan2
You'll need to do client nat on the css or implement some form of PBR on the firewall.
PBR means routing based on another factore than the destination ip address. In this case, it is necessary to route based on the source port.
That might be too complex, so an easier choice would be
..vlan1(ext).....vlan2(ext)
....|...............|
....+-------FW------+
.............|
..........+-CSS-+
..........|.....|
........vlan3 vlan4
there is no protection between internal vlan but you don't need policy routing or client nat.
Gilles.
Similar Messages
-
ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?
I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod. -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
I lost my iPhone, but it's been more than 24 hours so iCloud won't let me see the last known location of the device, and i need the map of it's last know location to find the phone, how do i get the map of it's last known location?
It's not likely to re-connect to a network lying on the ground somewhere and getting rained on, it would be really great if I could see that map again so I could use it's last known location to find it. Kind of pointless to have a 24 hr killswitch deadline. If I had known I would have taken a screen-shot while I still had access to the information. Since I lost the phone at Canada's Wonderland (which is now closed for the season) I don't have access to the location where I lost the phone (under a roller-coaster probably), and so I wanted to send the Lost And Found people a screen-shot of it's last known location, but I guess I can't do that now. (Apple are big jerks)
-
My company would like to give out iPads to contest winners and have company owned "propoganda" loaded onto the iPad for the winners to view. Most likely videos, word documents and possibly more. I have a couple of questions about that.
Without building a file sharing app ourselves what apps are the best for file sharing through iTunes?
If we load files onto a device using our iTunes Account, then hand it over to the winner and they put their iTunes account on the device and sync it, will the files we pre-loaded be erased?
If so, are there any other solutions to accomplish this task?
Thank you for any help you can provide!Syncing with your computer will delete data from his phone but you should be able to restore his backup.
iOS: How to back up
However, he won't be able to play music purchased under a different iTunes account than the one his phone is signed into. He can change the account to yours, but any apps he purchased under his account will no longer update, and any purchases he makes will go on your account. -
I need the simplest method of using two 6534 cards for a memory (UUT) test. I want to write (byte-wide) a pattern (A5,5A) into the UUT, then read it back and verify it matches the value written. Things that change are: Address inputs (increment by 1 for each read/write) with the control signals (card 1) and data values written/read (card 2). If I detect a mis-match, the test stops, I read the location one more time and verify it's really incorrect, the correct value is written back into the same location just read, a counter is incremented to keep track of the tota
l errors detected and the test (memory read/verify) is resumed. Each time through the memory another counter is incremented to track the number of passes through the memory read test. The test should terminate when the operator hits the VI panel STOP TEST button.Dave
Check out chapter two of the 653x User Manual for information on the different modes of operation. There it explains the difference between strobed and unstrobed I/O as well as Pattern I/O and Handshaking. It sounds as though unstrobed should work unless your UUT requires hardware timing or handshaking. You will have to keep track of errors in software however since the 6534 does not have any counters on it.
Brian -
Here is my problem:
I'm unable to download the latest software iOS 6.0.1 to my iphone 4 because there is not enough available space. I tried to sync my iphone to itunes and it says, "itunes cannot read the contents of this iPhone. Go to the Summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings."
I backed up my data to icloud to ensure everything is backed up. Is there a way to verify if data was really backed up in icloud?
What else can I do in order to free up enough space to download the newest version iOS 6.0.1? Current version on the iphone is 5.1.1 and there is only 1.6 GB of space remaining. I need 2.5 to download the software.If you really are running OS 10.4.6 you have a long way to go!
So, assuming you are not, what version of OS X do you have? -
How can i force a mail link to open in the viewer and not in the Mail App?
Hello to everybody!
I've a trouble about the mail links in a digital pubblication. I've to force a mail link to open inside the viewer.
A normal mail link causes the exit of the app and switch into the iPad Mail App... Is it possible force to open the mail link inside the folio with the DPS?
I've seen other digital pubblication made outside the DPS that can open the mail tab of the Mail App without exiting the starting App...
Thank you in advance for your help!
MaxYou can't with DPS, it will always launch the mail application registered with the operating system.
Neil -
I have three AppleTV's where I work. I have two at home. I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay. I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay. I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror. The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay. This is true on both networks: at home and at work. Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem. I have tried to "Reset All Settings." I have tried to "Restore." Does anyone have any suggestions? Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?
No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue! -
Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business. -
I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form using Reader, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want to redistribute the form as Read Only. I know how to flatten the form on a mobile device, but uncertain how they can do that with a PC or Mac using Adobe Reader. I looked at FormsCentral thinking there might be a solution going that route, but don't believe there is. Any advice?
FormsCentral won't help with flattening a form. You could set up the form in Acrobat so that the fields are set to read-only, using JavaScript. Not quite the same as flattening but it's the best Reader can do.
Note that when Reader is used to e-sign a document, it gets flattened, but this won't be possible if you need to Reader-enable the form and under certain other conditions. -
i have the ipad 2 16gb 3g and wifi, i carried out the latest update and was at 64% battery it updated as normal no problems then i went to use it about 15 mins later to c my battery was at 2% and then it powered down!!!!!
i trid charging it and it came up sayin charged and displayed 2% then switch off and kept powering up and cutting out so i carried out the reset though itunes and it put software on to fix battery and powering up problems and now it turns on fine but still will not charge correctly (must also point out im using the correct charger from the wall and i have tried other chargers and cables which have made no difference)
this is really bugging me as my ipad is a great piece of kit and worked brilliantly until i have updated which begs the ?? why are apple releasing updates which inaffect have destroyed my ipad :-(There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Hello, I reset my device and I reset the password on Apple website, then I went to start over my device, but it gives me: “Incorrect Apple ID or Password”, though my ID and password are working perfectly on Apple site.
Thanks for your response. I'm a 100% sure that I have not bought stuff in the store with multiple IDs. At most I have switched the country stores as I have two credit cards from two different countries. The number of IDs showing up when I click skip are no less than 20-30 and counting. Not a single ID do I recognize in them except mine which shows up in between somewhere. Putting my password leads me to another enter your password screen for an unknown ID.
Is there anything that can be done? -
HT201365 can i clear my device with find my iphone if the device is switched off
can i clear my device with find my iphone if the device is switched off
I'm kinda guessing here, but your phone was stolen and you want to lock it, but it is showing offline? You can send an lock request, and a delete request, but if it is offline, it will not be received until the device goes back online again. If the device has the latest iOS on it, and Find My iPhone active, then it cannot be activated without your Apple ID and password. It will be a brick. And, if they try to activate, it will connect to the Internet and you will be able to track and the erase will activate.
-
I lost my iphone 4 and switched on the lost mode, now i got back with police since i found it's location.
the problem is i can't find a way to turn it one or make it come online again so that i can turn of the lost mode.
it tells me that it's on but all i get is a black screen with nothing to see on it. it also keep making sounds like peeping but nothing more.
any idea how can turn it on again and fininsh this problem? thanksStop Lost Mode or change your contact info
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device that’s in Lost Mode.
Click Lost Mode, then change the information or click Stop Lost Mode.
From: http://support.apple.com/kb/PH2700
Maybe you are looking for
-
Black ops 2 Moderate Nat type - xbox 360 (BT HomeH...
Hi, I currently have a moderate nat type on Call Of Duty Black ops 2 which i would like to change to open. I have followed the post by StephanieG but it is still moderate. Could you please advice me on how to change the nat type to open? thanks
-
hi, i am fetching data field from the table. it consists of some 10 dates,i want to get the recent date among them. can any one help with the code. it is very urgent. thanks in advance
-
I currently have OS X Snow Leopard and want to Update to OS X Lion, but it says that it is no longer available for purchase. Do I have to go straight to Mountain Lion?
-
Modification d'un élément dans un clusters
Comment modifier la liste d'éléments dans une variable se trouvant dans un clusters. Merci d'avance Daniel Celui qui pose une question peut paraitre idiot sur le moment, celui qui n'en pose pas le reste toute sa vie!!!
-
15MB raw image but only 256x192 size available
I downloaded raw images to aperture 2 before I added raw patch for Canon G10. After downloading RAW patch I can't view these images larger than 256x192 thumbnail size, but file size appears to be 15 MB. Can this be corrected?