ERP-WM automatic Outbound Delivery Goods Issue upon TO Confirmation

Hello all,
We have the following scenario :
Stock Transfer Order -> Outbound Delivery -> Transfer Order -> Picking -> TO confirmation
When the TO is confirmed, we customized the system to post the Goods-Issue automatically.
Now, we would like to stop the Auto-GI on specific situations. To do that we would like to use BADI, UE or Enhancement-Point.
Since the Auto-GI is done in the background, we cannot make sure which enhancement to use - Breakpoints do not help (again, because it is done in the background).
My question - does anybody know which program is run in the background for the auto-GI ? OR, does anybody know which UE etc. can be used and may stop th auto-GI ?
Thanks,
Isaac

To my knowledge, there is no user exit or BADI for this purpose.
A proper solution depends on the way each transaction is executed and the criteria for allowing auto GI.
If the user is confirming the transfer order in transaction LT12 and provided he knows the GI should not happen then the indicator 3 can be selected for 'Adopt Pick. quantity'. This will override the movement type config and not post the GI for delivery.
On other hand if you are confirming TO via RF transactions or batch jobs then you insert the coding logic to set this indicator where required.
Hope this helps.

Similar Messages

  • Exclusion MRP Outbound TF delivery goods issue

    Dear guru ,
    I have an outbound delivery goods issue with movement 313.
    The MD04 evidence the outbound delivery as negative requirement.
    But this a TF between the same plant.
    How can i exclude this element in MD04 and MRP ?
    Thanks.

    Dear ,
    With MRP Type ND mrp don't consider all requirement.
    I have mrp type PD and i don't understand why MD04 consider delivery goods issue with movement 313 only with negative requirement.
    This is TF between the same plant.
    Bye.

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • PO automatic afeter to good issue to a customer

    Hi all
    My company need this process:
    After each good issue to a final customer (salesorder->delivery->good issue), a purchase order with the headquarter as vendor (cross company p.order) has to be generated with the same quantity sold to customer. (please note it is not a case of sales order stock). Exist some standard automatic SAP processes I can use?
    Thanks
    Davide

    The author of the form or any one its shared with can receive a notification when a response is received. The notification option can be found on the Options tab -> Notifications. You can also optionally send the response data in the notfication email.
    Randy

  • Work Order Issue - Error Creating Goods Delivery,Goods Issue or GRPO

    We use SAP Business One 2007 A PL:08. We have an add-on for the work orders and While putting the work order from released to completion, a user is getting an error message that says:
    "Error Creating Delivery,Goods Issue or Goods receipt PO- Error Issuing Delivery Note -Item no. is missing [DLN1.Itemcode][Line:3]"
    I do not see any item missing in the work order and all the posting periods are open. I have checked all possible settings!!
    Any idea what this could be?
    Thanks

    Hi,
    Is it your add-on or a 3rd party add-on?
    Thanks,
    Gordon

  • Post Goods Issue before TO Confirmation

    Hello,
    Is there any possibilities for Post Goods Issue of a delivery document before confirming the TO.
    Scenario 1. Delivery 2. Create TO 3. Post Goods Issue 4. Confirmation.
    Regards

    if the item category in your delivery has a picking relevance, then it is not possible to post a goods issue before picking, since picking quantity is updated when the TO is confirmed.
    Why do you want to post it in that illogical sequence?

  • How to change movement type of Delivery goods issue?

    Hi all!
    I need to change the movement type used by posting Goods Issue in an outbound delivery (tcode VL02N).
    Please provide some instructions or cookbooks on how to do the configuration..
    Thanks a lot!

    Hi,
    Get the Schedule Line Category used in Sales order. Go to VA03, here double click on the sales order line item and go to "Schedule Lines" tab, here get the Schedule Line category.
    And then go to VOV6 and double click the Schedule Line category and in detailed screen, change the movement type.
    Then try for Delivery and PGI.

  • Where do I define the automatic posting of goods issue to Cost Center?

    Dear Experts,
    I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
    Where do I define the automatic posting to Cost Center for Goods issue for consumption?
    regards,
    Abraham

    Hi,
    I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center).  I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center). 
    As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR).  And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
    So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
    regards,
    Abraham

  • Outbound delivery printout issue.

    Hi all,
    Onreleasing an outbound delivery, Output form should be sent to Print Queues, without
    any manual intervention. it will Possible in system?
    Regards
    RK

    Hi Ramesh,
    if you want to use a Print Queue other then the ones displayed in your screen shot, then you can define one in the Workcenter 'Application and user management' -> view 'Print Queues'
    There are two comprehensive Help Center articles on this topic, you might want to check out that.
    - A good overview on the options in "Process-Integrated Printing"
    - technical step-by-step prescription on the print queues in "Print Queues Quick Guide"
    Best regards
    Michael

  • SD delivery goods issue of Quality inspection stock

    Hello, anyone know whether SAP allow goods issue of quality inspection stock?
    If stanrdard customizing not possible, any user exit ?

    Hi
    No sap not allows GI for QI stock
    Beacuse Once Stock in QI without inspection we can't issue goods
    Hope ths helps
    Please reward points
    Sunil

  • STSA - Outbound Delivery - ASN Issue

    Hi,
    Following is our process flow.
    1. STSA ( Stock transport scheduling agreement )
    2. Outbound delivery based on STSA
    3. ASN from OBD (Step 2)
    4. Inbound delivery created based on ASN from step 3.
    Now, we see a problem during ASN Outbound.   We see that E1EDL41 segment not getting filled up.  Further analysis reveals that E1EDL41 is filled by VBKD table details.   In case of STO, there will be no VBKD data as it is a MM document. 
    Please suggest if there are any OSS notes, config  and finally if there are any exits through which E1EDL41 can be filled up in STO process.
    Thanks & Regards,
    C.L. Narasimhan "CLN"

    Hello CLN
    I am not a Techie, but let me try and help you.
    Can you try setting E1EDL41-QUALI  to '003'  ( suggesting that there is no preceding  sales document) and see? See OSS note
    1161130 - DELVRY03 - Predecessor data looked for when not required.
    Also if you are working in a Decentralized WMS scenario, you can take a look at a couple OSS notes:
    795584 - No E1EDL41 and E1EDL43 in DESADV IDoc from decentralized WMS
    1274050 - No E1EDL41/E1EDL43 in DESADV IDoc from decentralized WMS (2)
    922776 - No E1EDL43 in the DESADV IDoc from decentralized WMS (STO)
    Hope this helps. Let me know.
    I am not a Techie.

  • Tolerence limit for Goods issue while CO11N Confirmation

    Hi,
    We are creating the production order which continues for 1 to 5 days, and partial confirmation is done for the order e,g production order 100, partial confirmation 5,10,20 etc.
    Now while order confirmation, we do the goods movement by which raw material issue against order, but some material issue in different units, like cement issue in BAG, KG etc, due to this at final partial confirmation some times system is issuing the message goods movement failed and in transaction 'COGI' it is showing the error as 'RE Reserved quant. exceeded by 0.010 TO : 40007510 XXXX XXXX XXXX004002'  is there any option for this to allow some excess quanity by providng the tolerence limit, or is there any badi or user exit for this to rounding  the values at the time of final issue.
    Regards,
    Zafar 

    Hi Zafar,
    You can define underdelivery/overdelivery tolerance in Work scheduling view for the material master.
    Added to that, you can define if the tolerance is checked in order confirmation parameter (OPK4 ).
    Thanks and regards,
    Suraj Kamble

  • Goods Issue- Process Order Confirmation

    Hi,
    During Process order confirmation, in Goods Movement tab the BOM components with qty are displayed. But some components OTHER than BOM items ISSUED for the process order is not displayed in the goods movement tab. Why?
    Is there any additional configuation to be done?
    Thanks....
    JK
    Edited by: J K on Apr 15, 2008 6:04 AM

    Hi
    As said by Mr sateesh,
    If u r doing confirmation phase/operation wise(COR6), then the material assign to phase/operation is only seen according to phase/operation wise.so have to check in which phase u have confirm the component quanity.
                    or
    If u confirm the process order collectively(CORK), then their must missing in OPK4 (confirmation Parameter) of All component tick at Goods Movement.
    Kindly check the same & coem back if their is any other issue
    Parminder

  • Goods issue after PO confirmation

    Hi, expert
    After the production order being confirmed, can production line still staging materail from warehouse to PSA with referende to the same order?

    Wang,
    Do you mean to say that can the GR be done on the order which is already confirmed with CO11N? or the confirmation more than the order quantity.
    GR & confirmation are two separate processes.
    But GR as well as confirmation can be done more than the order quantity.
    You can have extra GR against the order with T code MB31.
    For confirmation more than the order quantity, you need to do settings in confirmation parameters in OPK4. If you set over & underdelivery toleranceis not checked in 'Generally valid setting' tab page.
    If you do this then it will enable you to do confirmation more than the order quantity.
    Hope this helps you.
    SmanS

  • Automatic goods issue for outbound delivery without picking/packing

    Hi,
    I have the following flow: sales order -> outbound delivery -> goods issue.
    I would like to to be able to post an automatic goods issue on my delivery.
    Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
    Thanks,

    Hi,
    Use t-code VL23
    select  varient SAP & STANDARD >>> Click on START IMMEDIATELY
    or else
    click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
    it means sytem will run this program after every one minute
    Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
    Kapil

Maybe you are looking for