Outbound Proxy - No XML message seen !!!!!!!!!!

Hi All
I am trying to use outbound ABAP proxy from an R/3 system . I have written a Z program to triger the execute_asynchronous method of the proxy generated. Now when i go to see the SXMB_MONI txn to see any XML message flow i dont see anything .
Any pointers so to what need to be perfect to see a XML message is the monitor for an outbound proxy??
Thanks in advance for your help
rohan

Hi,
Generally the message goes in the schedule mode when the target system is not available or the connection to target system is broken. Pl check the target system.
You can use this weblog as checklist.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies - Activate Proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
Thanks,
Prateek
Message was edited by: Prateek Shah

Similar Messages

Problem in ABAP Proxy(sometimes XML Messages are not being created)

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

Possibility to transfer additional parameters in outbound XML message

Hi,
is there any possibility to transfer additional parameters in outbound XML message using (BADI: BBP_SAPXML1_OUT_BADI).
Additional parameters are,
1. Communication Method for the Business Partner
2. R/3 Vendor # & logical system for Business Partner
3. Relationship between Business Partner Number and R/3 Vendor Number is BP GUID.
How can we extended the structure in the BADI.
Please give me qucik response.
Thanks & Regards.
Surya

Look for structure which the interface parameters are referring, there you should see some dummy structures referring to INCL_EEW* for e.g. in PO header INCL_EEW_PD_HEADER_SSF_PO. Add additional fields and pass the data accordingly.
Regards, IA

ABAP Outbound Proxy: some messages stuck in CRM system

Hi all,
we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
Any idea where could be the problem / we should check?
BR
Holger

On which SP r u working correctly. May be an SP upgrade could help.
Regards,
Prateek

Problem in XML Message creation using ABAP Proxy

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side using ABP Proxy. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

Hi,
There is no problem in the proxy. Some small problem in the database update.
It is solved.
cheers
san

Outbound status to delete XML messages in PI

Hi,
we are using a deletion process in PI wiith the pg RSXMB_DELETE_MESSAGES but the XML messages with a outbound status = 1 cannot be deleted. It seems that the pg SXMS_REFRESH_ADAPTER_STATUS permits to change the status to 6 but does not work for me.
So, I need guidance. For information, we condigured the deletion period (10 days).
Thank you

Hi Pascal,
You should try to manually confirm the messages (in SXMB_MONI - Cancel Processing of messages with Error CTRL F8) and then run all the deletion jobs again.
Please see Note 872388 and 820149 for details. Following is the relevant portion from 872388:
"Check if there are asynchronous messages in error status.
Asynchronous messages in error status are neither deleted nor archived.
This behaviour is different to erroneous synchronous messages which get
deleted after their retention period (see step 5) has expired).
Asynchronous erronous messages, however, must be cancelled and then be
archived. You can either use transaction SXMB_MONI, search for erronous
messages and manually cancel them. Or you can use the report provided by
SAP: RSXMB_CANCEL_MESSAGES. Should you decide (for non-productive
systems only) that you would like to delete these manually cancelled
messages, please use note 820149."
Regards
joel

Osb: Proxy Messaging Service retrieve only xml message that have the proper

Hi All.
I have a Proxy Service with Messaging Service type which read xml messages from a queue.
The Request Message Type in the proxy is xml and I have provided the type information by declaring (in the element and type field) the XML schema type of the XML document exchanged.
I need the proxy service to retrieve from the queue only the xml messages that have the proper schema.
But when the proxy retrieves any xml msg in the queue regardless of their schema definition .
Appreciate your input.
Thx,
Ross
Edited by: user6677631 on Feb 25, 2013 9:52 AM
Edited by: user6677631 on Feb 25, 2013 10:02 AM

Selecting the XML schema for request type in a messaging proxy does not ensure the validation of incoming XML message against schema. Similarly if you create a WSDL based proxy the validation against WSDL definition will not happen automatically. Choosing XML as the type of message will only ensure that any malformed XMLs will be rejected before entering the message flow. For validating against schema you will need to explicitly add a validate action within the proxy message flow, if validation fails raise an error and roll back the message to the Queue or log the errored message and commit the message/publish to an error queue.

Outbound xml messages

Hello All,
How to send outbound xml messages from oracle EBS ?
Any form ? page ? tool ?

Hi Bharat
Please follow below steps
Implement the BADI through SPRO
Give Enhancement Implementation name like Z_BIF_O_POERPREQ
Short Text: Enhancement Implementation of /sca/BIF_O_POERPREQ
Composite Implementation Z_BIF_O_POERPREQ
Click on create composite implementation, Maintain the name and short text for Composite Implementation
Click local object
Click green tick mark
Maintain the following fields (watch for customer namespace and CL at implementation class column) and click create button:
Badi Implementation : Z_BIF_O_POERPREQ
Implementation Class : Z_CL_BIF_O_POERPREQ
Select the dropdown under BADI Definition /sca/BIF_O_POERPREQ
Click green tick mark
Select the line and click copy Sample Class
Click local object
Then Implement all the three methods Before Conversion, After Conversion and Event Creation as it is necessary.
As i mentioned above you will find the BADI Defintion in the drop down and copy the sample class code, if you have any specific requirement enhance the code or else it is sufficient to carry the standard changes in the form of XML.
Best Regards
Vinod

Sending an XML message and using proxy at receiver end

hi all,
please suggest me the steps to be followed in order to send a XML message and accepting this message using proxies.
please help me out with detailed procedure.
thanks+regards,
Ujwalkumar

Hi UjwalKumar,
Follow this link:
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
This blog gives an excellent description of 'FILE to Proxy' scenario.
what you need is XML to proxy...i.e. your scenario is very similar to this one...only diffrence is that , you wont be using FCC .since your source msg is in XML format..
Hope this helps..
Regards ,
Sushil

Client Proxy: XML message not well-formed unexpected symbol 'target

Hi,
I'm trying to get a client proxy to work based on several blogs (1387,1672)
The error I'm getting now is:
<SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'" p2="" p3="" p4="">PARSING.GENERAL</SAP:Code>
<SAP:Text language="EN">Parsing error: XML message not well-formed in node (7 ,49 )unexpected symbol: 'target'</SAP:Text>
</SAP:ErrorHeader>
The proxy has been generated successfully
in SXMB_ADM R/3 role is application system and uses dest://rfc_dest
The rfc destination does not accept ?type=entry but apparently also does not need it. When I test the connection it gives a statuscode 200 (not 500)
SLDCHECK works fine.
Not sure where to look for this error?
Any ideas?
Thanks
Tom

Hello Smitha,
I forgot to mention that the message is still in R/3, it has not arrived in XI yet, so the error is visible in SXMB_MONI in R/3.
Also it is just a dummy message, It only contains one node and that is called differently:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:IF021_HTTP_MSG xmlns:ns1="http://oce.com/xi/eu1/R3CCSEU/IF021_Ordrsp_TD_to_Ordrsp_CCS" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<IF021_DT>GetOrdRsp</IF021_DT>
</ns1:IF021_HTTP_MSG>
Any mappings only take place in XI itself, and even there I have no node called target.
Regards
Tom

Is there a way to change the xml message generated by JDeveloper Proxy

Hi,
I have created jax-ws proxy client using JDeveloper 10g. I need to change the generated xml message tags. I need to remove the namespace prefix tags from the xml message. For ex: the current request message looks like this:
<ns0:EMPLOYEE_NAME>John</ns0:EMPLOYEE_NAME>
should be
<EMPLOYEE_NAME>John</EMPLOYEE_NAME>
without the nso prefix.
How can I do that? Please help me.
Thanks.

To original poster, please just select "Problem Solved" to help any future questions about this.
Is there a way to change the text message ringer? No.
End of thread

Namespace Element within Outbound XML Message

Hi there,
I am using XI 2.0 and trying to map an IDoc to an XML message to be passed onwards via JMS to a 3rd Party MQ System.
I've created the mapping without too many issues but the 3rd Party says that I need to remove the namespace element tag from my final message as they don't want to see this (It's not in their DTD). Is there any way in XI 2.0 to suppress this part of the XML output so that you only get the main XML definition tag...
i.e. rather than the final message being...
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MessageType xmlns:ns0="namespace">
<first_tag>Data<first_tag/>...
Instead produce...
<?xml version="1.0" encoding="UTF-8"?>
<first_tag>Data<first_tag/>...
Any help would be much appreciated.
Regards,
Gordon

Gordon--
I think I have some good news, and some bad news.
The good news is that you should be able to remove the namespace alias declaration attribute ('xmlns:ns0=...') and namespace qualifiers ('ns0:[tagname]'). You can do this by writing a dispatcher function and adding it to the JMS adapter.
The bad news is that this means you'll have to code the transformation that removes the tags. Dispatchers are essentially the 'user exits' of XI. This transformation can be either Java or XSLT -- XSLT is probably easier for a case like this.
There is a touch of documentation about how to do this in the adapter engine online help (or the 'Adapter Engine' guide for XI 2.0 SR1). See the sections for the JMS adapter for help on installing your dispatcher transformation. See the section "Using the Dispatcher: Example" for a bit of help on using dispatchers.
If you do it in Java, your dispatcher class will have to be accessible in the adapter engine classpath. If you do it in XSLT, I'm not sure where the .xsl file goes -- perhaps in the Adapter Engine working directory?
--Dan King
Capgemini

Proxy XML message Reprocessing

Hello Experts,
My problem is as follows
1. I get a pay load from PI ( I have written code in the method o post data in ECC say a Purchase requisiton using bapi )
2. If the BAPI fails then i raise a zee exception ( the message is manually restartable )
My problem is that my queue stuck up if i raise a exception what should be the possible solution for the same so as to achive follow thing ,.
1. if my bapi Throws error the xml message should be manually restartable
2. if I raise a exception the queue should not stuck up.
Or any other turnaround welcomed...!
Thanks and regards,

Hello @pawan ,
How do you make the xml message manually restartable ,
I am making it by raising a CX_AI_APPLICATION fault.
but My drawback is that When i Raise the exception and if the Quality of service of message is EOIO and in the queue my First message throws a exception my queue stops .
I just wan't to know will my provider class method in which i have written code to post the data will have a Exception as a parameter or not ? so that it will be caught and my queue won't stuck up and still my message will be manually restartable.
Still Waiting for comments experts ..!

Reading the XML message from Xi stored in XML format from a abap program.

Hi Gurus,
My requirement here is to read the data that will be coming from Xi from my custom abap program and updating 2 data base tables. The method is after the data mapping is done a class is generated in abap proxy in which a method is available. Inside the method i am writing the code for getting the Xi data stored as a payload message which can be seen in the transaction SXMB_MONI. My code is given below.
***begin code***
method ZII_PAYROLL_HEADER_IN~PAYROLL_HEADER_IN.
**** INSERT IMPLEMENTATION HERE **** ***
data: ln type i.
DATA: i_items TYPE TABLE OF ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
*DATA: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_TAB5.
data: wa_items type ZPAYLOAD_WRAPPER_EMPLOYEE_REC3.
DATA:PERNR TYPE STRING.
*data: it_ZPAYLOAD_WRAPPER16 TYPE ZPAYLOAD_WRAPPER16.
I_ITEMS[] = INPUT-PAYLOAD_WRAPPER-BODY-XMLDOC-PAYROLL_PERIOD_OVERVIEW-EMPLOYEE_RECORD[].
*I_ITEMS = INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
describe table i_items[] lines ln.
endmethod.
**End code***
As per the logic the data stored in the XML message should be avaialble in INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord which i am assigning to a local internal table in the class.
But in my case there is no data coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord.
But i can see the data transffered from XI in the transaction SXMB_MONI->XML message->inbound message->payload.
Is there any way to read the data stored in the XML message in the transaction SXMB_MONI.
Also why the data is not coming in
INPUT-payloadWrapper-Body-XMLDOC-PayrollPeriodOverview-EmployeeRecord inside the class.
If there is any solution for this problem please post it.

You can use function module SXMB_GET_MESSAGE_PAYLOAD.
Code snippet:
DATA: ls_mast      TYPE sxmspmast,
      ls_msgkey    TYPE sxmsmkey,
      lv_bin_xml   TYPE xstring,
      lv_str_xml   TYPE string.
* select sxmspmast into ls_mast
ls_msgkey-msgid = ls_mast-msgguid.
ls_msgkey-pid    = 'RECEIVER'.
CALL FUNCTION 'SXMB_GET_MESSAGE_PAYLOAD'
    EXPORTING
      im_msgkey      = ls_msgkey
      im_archive     = ' '
      im_version     = ls_mast-vers
    IMPORTING
      ex_msg_bytes   = lv_bin_xml
    EXCEPTIONS
      not_authorized = 1
      no_message     = 2
      internal_error = 3
      no_payload     = 4
      OTHERS         = 5.
IF sy-subrc EQ 0.
      lv_str_xml = cl_soap_moni_helper=>convert_xstring_to_string( xstring_in = lv_bin_xml ).
ENDIF.

SPROXY error testing outbound proxy interface

Hi,
I am trying to test an outbound proxy interface using SPROXY but am getting the following error:
Apart from the above messages there is no more help available. When I try testing the generated XSLT program using SXSLT_TEST it gives an error "No valid XSLT program supplied". I have checked and the auto generated XSLT program does exist.
Any help appreciated.
Thanks
Che

Hi Che Eky,
Check out below helpful thread & doc:
SERIALIZE_APPLICATION_DATA Conversion error ABAP => XML: Request Message
Serialization issue in abap proxy
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a89312f8-0b01-0010-86b3-fdd7178e0534?QuickLink=index&…
Regards,
Krupa

Outbound Proxy - No XML message seen !!!!!!!!!!

Similar Messages

Maybe you are looking for