Outbound queue : no process
Hi all,
We have CRM 4.0/Oracle/Windows OS, and after a client copy, I've tried to execute some processes that generate a outbound queue, but the entries still there with status "NOSEND", I found a SAP note about this problem, but it's not the same case, I tried to activate one of those queue, but nothing happen, can you please advise, and thanks in advance.
Best regards,
Aziz
Hi,
see if this can help you.
NoSend status for a queue
<b>"LUWs of this queue are never sent but retrieved by a special application. These queues are only used internally at SAP (BW or CRM during communication with Mobile Clients). Even if a LUW has been read by the corresponding application (BW, CRM), this status does not change. This LUW is only deleted from the queue if this application confirms collection (collective confirmation possible). Under no circumstances should this status be reset using transaction SMQ1 and the queue activated."</b>
Regards,
Smitha
Message was edited by: Smitha Rao
Similar Messages
-
Message is getting struck in outbound queue
Hi All,
I am doing a simple FILE to FILE scenario . The message is getting struck in SMQ2 (inbound queue). If i go to inbound queue and manually UNLOCK the queue entry then only the message is getting delivered . This is a new installation and we are on PI 7.0 .Please let me know if we have to so some configuration .Hi !
Check if your queues are registered in the SMQS transaction (for outbound queues) or SMQR (inbound). Go there, then enter the queues you need or reactivate them. They should be activated to process the message automatically whenever they receive something.
Try this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/8412417301ee6fe10000000a1550b0/frameset.htm
Regards,
Matias. -
Outbound Queue stacking up for old destination
Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish -
Deleting an outbound queue SMQ1
HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
MikeHello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues -
Recreate the BDOC for the BP, by running the transaction CRMM_BUPA_SEND
1. Display the BDOC in SMW01
2. Enter /h in the transaction code field
3. Press the 'retry to process message' button.
4. In the debugger - select the Settings button and 'In background task
do not process'
5. Enter F8
6. Create a new session for the outbound queue (/osmq1) there will be
an entry R3AUBUPA*** or CSA_BUPA**
7. Double-Click on this queue entry twice and choose Debug for the
CRM_UPLOAD_TRIGGER
8. In the debugger, set a breakpoint at statement 'CALL TRANSACTION' and then press F8.
9. At this statement double-click on the statement CALL_TRANSACTION and
change the variable CALL_TRANSACTION_MODE from N to A, press the
'change field content' button and then press F8
10. Now you will be in the R/3 System and you can see the batch input
screen for this customer and you will then be prompted for the
missing field in the BDOC.
When the field has been identified, please maintain this field in CRM
and then reprocess the error BDOC.Hi Stephen,
The user is a dialog user. Moreover, I have manually put an external breakpoint where it calls the function module CRM_UPLOAD_TRIGGER and debug the application when I go click on save in transaction BP. Even when I change the value of lv_synchron in the program LSMOUTILU44 to X so that the function module does not process in the background, I still cannot enter the function module.
The error I am getting is of type E02. Some of the mandatory fields are missing. Despite removing all mandatory fields, I am getting this error.
Can anyone throw some light on this issue please.
Regards,
Abdullah Ismail. -
Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)
Hi ,
I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
and material from ECC to CRM.
BP and Materials are replicating well.
My Issue is,
while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
status as "SYSFAIL".
QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
Transaction Code SMW01,
BDOC Details:
BDOC State Description: Information no processing.
BDOC Type :BUS_TRANS_MSG.
ERROR Message:
a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
b.Business transaction type ZEQQ does not exist.
c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
Thanks and Regards,
Ravi AMaintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
User CRM
Object Name SALESDOCUMENT
Destination xxxxxxxxxxxx
Load Type delta download
Queue Name
Queue Name
BAPINAME
INFO
InQueue Flag X
Send XML
CRM Release 700
Logical system xxxxxxxxxxx
this will stop the flow of ecc sales documents to crm
this will also stop Bdcos in SMW01
Please let me know if this helped -
in SXMB moni entries,
when the message is
for example inbound: IDOC and outbound: AENGINE, the queue seen is a tRFC outboud-queue,
and when inbound: IDOC and Outbound: PE, the queue seen is a
qRFC outbound-queue
can u explain me why this>?
but nowhere i can see inbound-queues in the MONI. means XBTI* or XBQI*...
can u explain me why?Hi,
Please see the below link
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla -
Queues, not processed automatically they are status Ready
Hi Experts ,
Queues in outbound(smq2), not processed automatically they are status Ready from long time, RFC is working fine
i tried to process maually one by one ,but they are many.
how can i execute this , need your inputs.
thanks in advance
vamsiCheck that the scheduler is running in SMQR
Read,
http://help.sap.com/saphelp_nw04s/Helpdata/EN/e4/df5f3c8dde1c67e10000000a114084/content.htm
Regards
Juan -
Hi,
I have an outbound queue failed with the error 'SYSFAIL' and the error text ,"for object, number range interval doesnot exist" in CRM system. Please help me as i would like to debug the queue. As i am new to CRM middleware, i would like to know the process of debugging it.Hi,
Can you please check the very helpful note 656823 for interface debugging.
Please see as well link
http://wiki.sdn.sap.com/wiki/x/JovwDg
Please check as well in t-code SNRO if the number range is set properly in both system ECC and CRM.
Best regards
Christophe -
Monitoring qRFC outbound queues
Hi,
I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
Does anyone have experience with this?Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
That should put you in the right direction.
Regards
Juan -
Error in Outbound Queue while Releasing order from CRM to ECC
Hi,
When I release my sales order from CRM to ECC, I got an error in Outbound Queue saying "Screen output without Connection to User".
This is occuring in FM : BAPI_SALESDOCU_PROXY_UPLOAD
Can you please tell me why this error is coming?
Thanks,
SandeepHello Sandeep,
During the RFC call from CRM to ECC, this is a background processing, the screen call is not allowed.
If a call screen is executed, there is the mentioned error.
Please check in your ECC system, whether you have any user exits that have the coding 'call screen'.
Best regards,
Maggie -
Help with status of inbound/outbound queues
Hello SDN XI experts!
I hope one of you can offer some assistance with an XI issue we have, as we currently have no XI resource on site and we're stuck in dire straits!
We have had some problems with our inbound and outbound queues in XI, and a search of the net and SDN hasn't helped yet. Basically, if I go in to transaction SMQ1 or SMQ2, I can see that there are files (or do you call them messages?) are building up in our queues with the status READY. To process these files through XI, I am going in to transaction SMQ1 and SMQ2 periodically, and activating the queue. This sets the status to RUNNING, and the files/messages are processed successfully.
What I'm after is how do I either:
a) set the queues so that they are always in status RUNNING;
b) schedule a job to activate the queues periodically; or
c) is there some other thing I am missing?
Sorry if this is a bit vague, but I have no experience of XI at all. If I haven't provided enough info, please ask some questions. Anything you can do to help would be great as I'm manually doing this ten times a day and it's getting tiresome!Thanks for all your help guys, it's much appreciated as I have ZERO experience with XI...
I have uploaded a screenshot of SMQR to the web, apologies for the quality, but I only have MS Paint on this desktop:
http://img405.imageshack.us/img405/7202/smqrws8.jpg
Luckily, some files have started to queue up again, so I could take some more screen shots! Here is the view of SMQ2:
http://img166.imageshack.us/img166/7086/smq2mv6.jpg
And then when I double click a queue, you see this screen with the queue in the status READY:
http://img248.imageshack.us/img248/3935/smq22ed6.jpg
Until I go in to SMQ2, double click the queue, highlight it and press activate, the files/messages will just stay in XI. After I press the Activate button on the application toolbar in the third image, the files are processed successfully. i.e. If you go in to SXMB_MONI they have a little chequered flag next to them.
Thanks for all your time guys, points will be awarded if you can help me out! -
Hello Experts,
We use XI for data replication from CRM to R/3. Now because of error in one outbound queue all the remaining queues are getting stuck. We want to do this, even if there is an error in one queue we should be able to process the remaining queues. for example, Queue 1 has some error and we have 100 queues, so other we should be able to process other 99 queues without any problem. Its consuming so much time.
Please reply.
Points will be rewarded generousely.
Sajjanhelp out for Inbound & Outbound queue
-
Delete Outbound Queue : SMQ1
Dear Friends
I am upgrading my ECC6 PRD Server by EHP5.
My Check Roadmap step has been completed with warnings!
I Knew it to release and delete by the LBWE and LBWQ.
But my question is that i need to delete it now in CHECK and PREPROCESSING phase.
or
Delete it in the DOWNTIME phase ! becuase, the PRD system in integrated with BI PRD server and the data is collecting each hourly.
Please advise.
A2EEMCEX 151 Entries for application "11" still exist in the extraction queue ->
Long text:
Cause
Changing extraction structure &V#& for application &V#& is forbidden,
because there are entries that have not yet been processed into an
extraction queue for application &V#& for at least one client.
If an extraction structure is changed to the entries that are still
open in an extraction queue, then these are no longer able to be read
and can cause terminations with the collective update.
What to do
Start the collective update using the function "Job Control" in the
<DS:TRAN.LBWE>Logistics Extraction Structures Customizing Cockpit</>.
To get an overview of the logistics extraction queues, see the
<DS:TRAN.LBWQ>Logistics Queue Overview</>.Dear Anwer,
As long as you are in prepare or uptime of the upgrade you can
ignore the errors in the RSVBCHCK which say that there exist
update records (as it is normal that there are update records
in a system which is productively used).
In the downtime there is also a check on update records. In the downtime
this check cannot be ignored.
You can also read note 328181.
Please also refer to the upgrade guide with this regard.
SAP Enhancement Package 4 for SAP ERP 6.0 ABAP:
page 105********************************************************
Outstanding or Incomplete Updates (Phase JOB_RSVBCHCK2)
If there are any outstanding or incomplete updates, the upgrade stops in
this phase with a message.
If errors occur in this phase and you have not stopped production
operation yet, you can skip these
errors with ignore without entering a password. However, we recommend
that you check for these updates and clean them up. The message is:
Update records still exist - Please process
page 103*******************************************************
Update records still exist - please process
Make sure that you have cleaned up all outstanding updates.
Make sure that you have cleaned up all outbound queue RFC calls by the
JOB_RSVBCHCK_R or JOB_RSVBCHCK_D phase (during downtime) at the latest.
If you are still in the preparation phase (before the beginning of the
Preprocessing roadmap step) and therefore in production operation, you
must only delete the terminated updates.
Also during the production downtime for such issues you can check the
following information:
This error is caused because the updates have been deleted but
entries in tables related to the update process are not empty:
- tables VBDATA,VBMOD and VBHDR should all be empty
To avoid the error message , run report RSM13002 with "delete" option
to delete update records as explained in attached note 67014. After
that you can repeat the phase, the incidence should have been solved.
-> 67014 - Reorganizing update requests
Information remains same for EHP5 as well.
Regards,
Abhishek -
QRFC Monitor (Outbound queue)
Hello friends,
I have to delete and fill up the setup tables for the application 18. I have successfully deleted the data from the setup tables in LBWG. But when I am going to delete the entries in extraction queue(LBWQ), I find two queus for application 18. They are MCEX18 & MCEX18_1. Could you pls let me know the reason for the 2 entries. Should I delete both? Same is the case for allication 17.
Thanks in advance.
VishwaHi,
The entries in LBWQ are those which have only been captured in outbound queues and have not reached RSA7. It is absolutely normal for them to have destination as NONE.
Go to SMQ1, and execute, there you would find multiple entries for application 18
e.g.
Queue Name Destination Entries
BWXXX2LIS_18_I0NOTIF BWCLNTXXX 100
BWXXX2LIS_18_I0TASK BWCLNTXXX 200
MCEX18 NONE 2000
The first two entries here are the ones which have already been processed from outbound queue to RSA7. Therefore now they have destination as BW system.
Please check if here you get entries for 2 different BW systems. This may be the reason for 2 entries MCEX18 and MCEX18_1 in LBWQ.
Maybe you are looking for
-
Satellite A100-646 and external monitor shows black screen
Hello to everybody, I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week with
-
Is it possible to embed Youtube videos in to InDesign?
Hello everyone, im working with a interactive pdf and i need to put in a couple of video's. Is it possible to embed Youtube video's into InDesign? I know that this question has been asked before, but a answer on it i couldn't find. Sorry for my bad e
-
Hi I'm new to BPM's ... my scenario is I'm doing Multiple files to Single file scenario.. i have two sender files.. and one receiver file... for this i need to use BPM for merging the message.. I created all the objects as specified by the blog
-
Alert Configuration and Alert Inbox Does Not Show Up
Hello All, We are having a strange problem regarding alerts in XI. We are on NW2004s XI 7.0 SP 9. The TCode 'ALRTCATDEF' works fine. But when we go for configuring alerts in RWB, it says '404 Not Found: The requested resource does not exist'. Can any
-
I need to keep a link on an oaf page on click of which microsoft outlook should open to send a mail with a predefined email address. How can we do this ?