Outgoing ssh goes to my own computer

I tried out a program called AlmostVPN and it didn't work out for me. I uninstalled it and now whenever I try to make an ssh connection to a remote computer I log in to my own computer. I think the output of ifconfig should show if out going port 22 is being forwarded back to the incoming port 22, but I'm afraid I'm just not geek enough to understand it's output (or how to fix it!):
Last login: Tue Apr 11 18:02:35 2006
Welcome to Darwin!
Dr-Milo:~ hammer32$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::203:93ff:feda:504e%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.167 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:03:93:da:50:4e
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:30:65:07:fc:00
media: autoselect (<unknown type>) status: inactive
supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:03:93:ff:fe:da:50:4e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
Dr-Milo:~ hammer32$
Thanks much,
Sean

Sean,
the output of ifconfig will not tell you if ssh is forwarded back to your own machine.
First thing to do is to disable your firewall (from system preferences). Then check if everything works. It may be a "wrong" rule in your firewall setup.
Please look at the following link:
http://www.oreillynet.com/lpt/a/6306
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.6)

Similar Messages

Will building the site using my own computer effect my client's usage?

I am wondering if I build my client's website in Contribute CS3 on my own computer, will my client have problems connecting and maintaining her website once I have finished? My client is going to purchase Contribute CS4. Thanks in advance.

Now that I'm more comfortable with what I'm attempting to communicate, let me start over...
I am a newbie at creating a site for a client in iWeb, but I need to keep it separate from my other iWeb stuff so I can upload it to different URL (?).
You helped find the solution to uploading a site from a folder using Cyberduck, but I think there's another part to the equation I haven't solved: I read a post by Old Toad concerning multiple sites and he mentioned iWebSites. Would this be something I would use?

I have my iphone 5 set up with Itunes on one computer, but I recently just bought my own computer. How do I set up my Iphone with the new Itunes account? Its telling me it can only be set up with one account. Do I have to delete the other account?

i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account? It says my phone can only be set up woth one itunes account. How do I remove the previous account?

ThisGal_Drea wrote:
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
Do you mean iTunes library?
iTunes account is what you use to make iTunes purcahses.
iTunes library is what is on your computer.
It says my phone can only be set up woth one itunes account. How do I remove the previous account?
No, it tells you it can only be sync'd with one iTunes library.
Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer.

2011 Macbook Pro suddenly says no space available on start-up disk (plenty available) and USB drawing too much power (only charging phone). What's going on with my computer? No longer able to charge my iPhone 5.

Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?

Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk

I've downloaded the past 2 updates for my iphone 5s and now it keeps asking me to trust my own computer and it wont even connect to itunes!

I've downloaded the past 2 updates for my iphone 5s and now it keeps asking me to trust my own computer and it wont even connect to itunes! I am current with software on both my computer and my iphone 5s. Now when I hook it up to my computer it still keeps asking me if I trust the computer and it won't connect to Itunes?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Is it possible that a second person can manage the website on his own computer?

Is it possible that a second person can manage my website on his own computer?

Is the second person using a Mac? If so yes. All you need do is give them a copy of your domain.sites file that is located under your User/Library/Application Support/iWeb/domain.sites. They can make changes to the site and re-publish, but only if they have your server information etc for the place you are hosting.
If they are not using a Mac, then it is not really feasible to do this - iWeb produces too much code to be comfortably altered using an html editor, so unless that person is using a Mac too, then it is not really worth it. Either they need to have access to a Mac or you need to use another platform that can be accessed by a pc too.

Google said something wierd is going on on my computer...

Today, when I woke up I had Google notice on my gmail account that something wierd is going on on my computer. I had to enter my telephone number, then Google sent me SMS with code so that I could enter my account. Then I had to change my password. In my mailbox I found that someone was sending mails from my e-mail acccount. How is that possible? Did someone break in my iMac? Do I need additional software for Firewall and Antivirus?
Thank you in advance for your answers.
Kind regards,
Klemen

Hello k:
I do not use Gmail. However, the problem is, I think, on the Google end. The mail resides on a Google server, not anything to do with Apple.
I seriously doubt if the penetration was to your Mac.
I would definitely not buy A/V software. There are NO viruses that affect a Mac running OS X - NONE.
You should, if you have not done so, be sure that the built-in OS X firewall is on.
FWIW, I had a similar problem with one of my AOL mail accounts. The problem was definitely on the AOL side.
Barry

How Do You View PHP Files on Your Own Computer?

Hi everyone, I am working with PHP galleries, but have to upload the file to my website every time I want to look at it. This is very annoying if you want to view the images on your own computer! What is the best way of viewing and testing the files on your own computer?
If it matters I am using a Mac and have Safari and Firefox. I googled this and the results were very confusing! Thanks for your help.

When XAMPP is open if you go to Status (on the left) it says this …
MySQL database
DEACTIVATED
PHP
ACTIVATED
Perl
ACTIVATED
Common Gateway Interface (CGI)
ACTIVATED
Server Side Includes (SSI)
ACTIVATED
PHP extension »OPcache«
DEACTIVATED
see FAQ
PHP extension »OCI8/Oracle«
DEACTIVATED
see FAQ
I don't know if that's good or bad!

Can I browse my own computer with Firefox?

I would like to know if, as in Freemind, there is any way of browsing the folders of my own computer through Firefox.
Thank you

If you type '''C:''' in the location bar it will show the contents of that drive, you can select folders by clicking on them.

Authorizing My Own Computer

Every time i try to authorize my own computer so i can play purchased music i get denied. HELP!

jhk3,
Does it give you any particular reason for doing so?
See if the article in the Apple Knowledge Base helps at all:
http://docs.info.apple.com/article.html?artnum=93014
If not, post back with more details.

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference. Is there a plug in I need?

I have a cooliris wall embedded in a website I built. IE shows it but Foxfire doesn't. I've looked for an add-on but the cooliris one goes to its own wall. I updated to ff4 but no difference.

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

I have iPad 2 but I don't have my own computer to set it up w...how do I get my Itunes library on the iPad

My old computer crashed...again. I purchased the ipad 2 for easy travel but I don't know how to get years of my itunes library on the ipad bc I don't have my own computer to set it up on. Is there a way to switch itunes user in order for me to set up my own library of music?

Is there a way to switch itunes user in order for me to set up my own library of music?
No

Is it possible to activate LR5 on a second (privately owned) computer and where do I have to enter the license key?

is it possible to activate LR5 on a second (privately owned) computer and where do I have to enter the license key?

Lightroom doesn't use activation. The EULA allows you to install Lightroom on two computers, one a desktop the other a laptop. To apply the serial number you go to the Help menu then choose Lightroom Registration.

On shut down I get a window that says Continue the installation Choose abort if you wish to cancel the installation If I don't press anything or if I press Yes or Abort the message goes away and the computer shuts down. This has been going on for ov

I have a 27" iMac mid 2011 2.7 GHz intel core i5 with OS 10.10.1. For about the last month when I shut down I get a window that says "Continue the installation Choose abort if you wish to cancel the installation ABORT   YES".   If I don't press anything or if I choose ABORT or Yes the message goes away and the computer shuts down. But the next time I use the computer and then shut down the message is back. I have looked to see if there are any downloads pending or if there are any updates trying to download. I am very puzzled.

Genieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
    http://www.adwaremedic.com/index.php
    Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
    Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
     Turn those off and relaunch Safari to test .
     Turn those on one by one and test.

HT201251 I can not cancel the authorization authorized to itunes devices The program asks me to contact support What to do graduate as I can not back up any of my own computer Please attention thanks

I can not cancel the authorization authorized to itunes devices
The program asks me to contact support
What to do graduate as I can not back up any of my own computer
Please attention thanks
MAHMOUD
<Personal Information Removed by Host>

If you haven't already done so then you will need to do as the message tells you and contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page

Outgoing ssh goes to my own computer

Similar Messages

Maybe you are looking for