Outlook 2007 - a never ending story?

After upgrading to Outlook 2007 I can´t sync the datebook in my m500. The log says:
HotSync operation started 04/10/07 20:20:19
OK Mail
OK Date Book
OK Address Book
OK To Do List
OK Memo Pad
OK Note Pad
OK AvantGo Connect
HotSync Error: Unknown error. (1)
OK System
HotSync operation complete 04/10/07 20:20:49
I am desperate, Please help!
Regards
Post relates to: Palm m500

HELP!
Now my log looks like this:
HotSync operation started 04/17/07 20:26:19
  - The following message was truncated on the Handheld:
From: [email protected] (PC för Alla), 4/17/2007, Nyheter och surftips: 5 smarta prylar som skickar film och musik trådl
OK Mail with 3 message(s)
OK Note Pad
-- Outlook Notes
User: Prixton
Version: 3.0.2 (Build: 20010112)
ERROR: 00008001
Unable to communicate with Outlook's OLE Automation interface.
     679: PMirror
Outlook Notes synchronization failed
-- Outlook Calendar
User: Prixton
Version: 3.0.2 (Build: 20010112)
ERROR: 00008001
Failed opening Outlook interface.
     447: PMirror
Outlook Calendar synchronization failed
-- Outlook Contacts
User: Prixton
Version: 3.0.2 (Build: 20010112)
ERROR: 00008001
Failed opening Outlook interface.
     447: PMirror
Outlook Contacts synchronization failed
-- Outlook Tasks
User: Prixton
Version: 3.0.2 (Build: 20010112)
ERROR: 00008001
Failed opening Outlook interface.
     447: PMirror
Outlook Tasks synchronization failed
OK AvantGo Connect
HotSync Error: Unknown error. (1)
  -- Backing up db Saved Preferences to file C:\Palm\Prixton\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 2007-04-17 20:27:23

Similar Messages

Never ending story: Exchange and Outlook 2010/2013 - Read receipts (reading confirmation) implementation is buggy

OK, I try it again (for the fifth time or so), maybe anywhere in the big microsoft world there is ONE support engineer that is able to recognize a bug and hand it over to the development????
In several cases the read receipt does not contain the sending time of the original message, instead it contains (quite senseless) the time when the receipt itself has been sent.
The only information in the read receipt is the subject of the original mail which may be identical in longer mailthreads to several (dozends of) mails. So in this implementation you are not able to find out to which message a read receipt really relates.
So we cannot prove at all if a single mail in a thread has been read or not. The printout of such a receipt does not have any information that can be used in a meeting or discussion.
Since this situation obviously lasts for several years I'd like to ask
how I can get a working read-receipt-functionality for professional eMail-handling???
It seems that the problem does not lie in the content of the MDN sent by the Exchange server.
If I look into a copy of such a sent MDN with Thunderbird, it tells me for example, that my mail, sent on 15th Juli 2013 14:43:47 (UTC+1) has been read on 15th Juli 2013 14:50:08, which is correct.
But in combination with Outlook I get the same MDN displayed like follows:
Your message at... subject... sent Monday, 15. Juli 2013 14:51:30 (UTC+01:00)... has been read on Monday, 15. Juli 2013 14:51:16 (UTC+01:00) (Text translated from German to English)
So Outlook exchanges the timestamps and falsifies the content of the MDN.
This does only appear in combination with an Exchange server. If I work with a POP3 account and Outlook and send a message to an Exchange 2010 mailbox the correct timestamps are displayed within the returned MDN-message.
All involved systems are set to German (DE-de), the timezone on all systems is UTC+1
Here a small table with my tests
I've used Outlook on all Clients, 2010 and 2013.
Sender: sends initial mail and gets the Reading Confirmation
Receiver: gets the initial mail and sends the MDN
Sender     |     Receiver     |     MDN Display
POP3        |     Exchange   |     correct
Exchange |     Exchange   |     fail (displays wrong "sent"-time)
POP3        |     POP3         |     correct
Exchange |     POP3         |     fail (displays wrong "sent"-time)
It is obvious this cannot be a "feature". This is different behaviour depending on the senders Account type and one of this two scenarios must be a bug.
Could you help me further on this, please?

Almost no - the MS-Support here in this website was completely overchallenged to even understand this issue. I've tried several times to address this in this forum with no success. The "supporters" here had only one target - to quickly get this
"complicated" case off their desks.
The Office 365 support was much more competent and able to understand the problem. They escalated this to the development team (which lasted about 3 months, dozends of telephone calls and about 20 hours working time, which I had to donate to Microsoft freely)
and located the Problem in Exchange Server.
The result was that they promised to fix it in Exchange Server 2013, but there will be no Bugfix in Exchange 2010. I am waiting for the fulfilment of this promise since over 6 months.
Microsoft seems not to have any problem to leave their (professional and very expensive) Exchange software in a buggy state.
My conclusion: If Exchange 2010 runs out of maintenance I'll switch to Linux and Zarafa Server. The Zarafa guys are able to understand and fix their bugs and I do not have to donate thousands of Euros in working time only to get them understanding their
own bugs.
PS: You need only to press F1 in Office, especially in Access in the German language variant and you get an impressing lesson how desolate Microsoft is working today. Pressing F1 in Access 97 or XP lets you know, how much better they were some years ago.
An impressive deep fall down to the ground.
Regards, Conny

IOS and Activesync mail Exchange (the never ending story)

Hi All,
And here we go again: even with the update 8.1.3 Mail with Exchange ActiveSync stopped working.
The problem occurs now in every update from 8.0 (and even with upgrades version 7.x). For each upgrade of IOS email and activesync stop working, not only in push mode but also in scheduled mode (eg every 15 minutes). The email does not update until I access mail app.
The Exchange Server does not change for years, and the solution must be provided on IOS from Apple and not from Microsoft Exchange Server since the problem occurs only on IOS and only after updates of iOS. This story is really frustrating. No Android or Microsoft Phone has never had this problem. I begin to think that changing phone is the only alternative.
I do not want to buy paid app to use the e-mail, a feature that should work perfectly with the default tools of a smartphone device from 729 EUR.

I posted this another another topic. Anyone have any clue?
Well, here's a new twist. I purchased the Academic Edition of Aperture 1.0 DIRECTLY from Apple and when the rebate was announced, I applied for it. A couple of weeks later I received a letter stating that my serial number "cannot be read, is incomplete, or was not recognized as a valid serial number". OK, my penmanship isn't the best, so I sent them one of the Aperture Software Coupons with one of the serial number stickers attached to it thinking that this would surely be sufficient proof of ownership. Today, I received the same letter again. I just got off the phone with their help desk and all they could tell me was that my serial number isn't eligible for the rebate with no reason why. When I spoke with the supervisor, they stated they don't have access to that information, only that it comes up as ineligible.
Did I miss something? Were there qualifications to the rebate that I overlooked? As a PC user trying to make the switch, this kind of customer service dosen't bode well.
(I understand that Apple doesn't allow the free exchange of information on these boards so the moderators will probably delete this post fairly quickly. If you have some insight, you can email me at davedotmelvinatgmaildotcom)
Thanks,
dam
iMac, 2 GHz Intel Core Duo, 2 GB Mac OS X (10.4.6)

E-coupon and the never ending story...

A simple process print the form, fill it out and in 6 to 8 weeks you'll get an "e-coupon" for $200! It would have been simpler to fill it out on line but Apple being one of the most advaced computer makers in the world decided to use the first mentioned method and now with everyone getting their coupons I wondered where mine had gone.
A call to the number on the status website told the story. They entered my email address wrong and now they tell me my e-coupon will be 2 weeks in comming, at least the last time I called because in three calls they still had not corrected the problem or my email address so I wonder just who got my $200 e-coupon?
Karl

I posted this another another topic. Anyone have any clue?
Well, here's a new twist. I purchased the Academic Edition of Aperture 1.0 DIRECTLY from Apple and when the rebate was announced, I applied for it. A couple of weeks later I received a letter stating that my serial number "cannot be read, is incomplete, or was not recognized as a valid serial number". OK, my penmanship isn't the best, so I sent them one of the Aperture Software Coupons with one of the serial number stickers attached to it thinking that this would surely be sufficient proof of ownership. Today, I received the same letter again. I just got off the phone with their help desk and all they could tell me was that my serial number isn't eligible for the rebate with no reason why. When I spoke with the supervisor, they stated they don't have access to that information, only that it comes up as ineligible.
Did I miss something? Were there qualifications to the rebate that I overlooked? As a PC user trying to make the switch, this kind of customer service dosen't bode well.
(I understand that Apple doesn't allow the free exchange of information on these boards so the moderators will probably delete this post fairly quickly. If you have some insight, you can email me at davedotmelvinatgmaildotcom)
Thanks,
dam
iMac, 2 GHz Intel Core Duo, 2 GB Mac OS X (10.4.6)

Session - the never ending story....

Hello,
I am still fiddling around with the session problem...
We are using an adapted implementation of the SAP proposal with the switched frames (session_buffered_frame.htm). While this works fine if we call the application via URL and then close it, it has an intrinsic problem: If we call the same application (url) with different parameters in a follow-up call instead of closing the browser and re-start anew, the new URL causes the session to terminate instead of opening the new window. This is because the frame handling has changed the URL for the page and the new call unloads the frame causing the session to terminate.
Does anyone have a hint how to handle the session problem without the URL rewrite so a new call does not unload the session? Unfortunately the BSP/HTMLB tablib does not offer any OnUnload handling to avoid the frameset trick.
TIA
Peter Woerner

Hi Peter,
also the F5 (REFRESH) button of the browser causes a new session to be created.
Due to that I opted to program a Logoff function and leave the session live if the user call another URL.
The session will be destrayed by the server timeout handling...
Sergio

Code 1603 - never ending story

I am using Windows 7 Professional. There was an older version of Skype installed, but it was removed. There is no file/directory on the disk conating word SKYPE. There is no entry containing letters SKYPE in the registry. The sanity of the registry has been checked with Norton Utilities. The registry was checked also with Microsoft's own Wunderwaffe named FixIt that was suggested with some earlier posts dealinig with Code 1603 error. It didn't find any issues.
I downloaded a new Skype 7.6.0.103 from the skype.com. After being launched three offered options (Click-to-Call, Bing, etc) were deselected. The program ran for couple seconds and finished displaying a following dialog:
The older version of Skype 7.6 cannot be removed. Contact your technical support group.
After the message was accepted, a second dialog window popped up stating:
Installing Skype failed; code 1603. A fatal error occured during installation.
I have to admit the messages are not very informative, but this is all what I've got. Does anybody have any idea what could be wrong and how to fix it? Perhaps the maintainers of the program could elaborate at what conditions the above messages would be printed.
--gb

Run the following program as it should pick up the majority of leftovers that would impede the install. I recommend you reboot before reinstalling though it may not be necessary.
http://www.pcdust.com/Downloads/SRT/SRT.exe

HT1296 I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggesti

I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?

I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.

Outlook 2007 popups for credentials all the time at the end of creation new profile

Hello all,
I have a new exchange 2013 cu7 for which client role is load balanced. There is no problem creating and working with outlook profiles on Win 7 pc's with outlook 2010.
We have 2 terminal servers with Windows 2003 and Outlook 2007 installed (last patches for office3). When I try to create a new profile, I am asked to enter credentials at the end. Password is correct, but it continues to ask for it. The only way is to choose
cancel, but thus profile will not be created.
OutlookAnywhere settings:
InternalURL exists
Works with SSL
Authentication NTLM
ExternalURL empty
Works with SSL
Authentication NTLM
(Reminder- only these 2 terminal do this problem- they are located in a closed environment- I opened 443 port to exchange client rule servers and client VIP (configured as Internal hostname)).
Any help appreciated!

Try using Set-OutlookProvider and setting the EXCH and EXPR Providers.
Set-OutlookProvider EXCH msstd:<Common Name of Cert>
Set-OutlookProvider EXPR msstd:<Common Name of Cert>
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Outlook 2007 won't open .pst file from Outlook 2000

I have been using Outlook 2000 for 10 years and hit the 2GB limit. As a result, Outlook 2000 would not open mail and did not permit me to delete mail to clear space.
I’d been meaning to install my Office 2007 and this seemed like the time to do so. Once installed, I attempted to open my 2 GB PST file in Outlook 2007. No luck.
Messages: “The message interface has returned an unknown error. If the problem persists, restart Outlook.” And “Cannot display information. There is either a problem connecting to the server or an error has occurred.”
Researching on the Web, I found Microsoft guidance that I could create a new data file and import the old (ANSI) .PST file into this new (Unicode) .PST file. When I did
that, during the Import, I encountered another error message: “The file has reached its maximum size. (Followed by two unhelpful sentences – can’t be imported).”
OK, I think, I have to reduce the size of that file. Research yields Microsoft’s “oversized PST and PST crop tool.”
http://support.microsoft.com/kb/296088 I do that and follow the instructions to scan the truncated file with Microsoft’s
scanpst.exe tool, which is included with Office.
Another error: scanpst.exe will not complete its scan. I receive a mysterious error message with no indication what the exact problem is. I created multiple versions
of the truncated .PST file, each smaller than the last, so that the smallest was 1.7 GB. Still errors with scanpst.exe and ultimately no luck.
I have spent more than 10 hours trying to solve this problem and am at wit’s end. I’m a freelance writer, and it’s costing me money. What’s worse,
info on projects I’m supposed to be working on are locked in that PST file! All data is stored locally on a Dell laptop with Windows 7.
Help anybody? Please? Thank you!

Fifteen hours later, I was back in business, having upgraded from Outlook 2000 to Outlook 2007, a process one would expect to take a half-hour tops. I'm no IT pro, but
I am pretty accomplished at fixing problems. This one seemed beyond my reach, as neither of the utilities Microsoft recommended to address the issue, the truncation tool and scanpst.exe, worked -- what a surprise! I engaged a local technician to diagnose the
problem remotely, and over a course of four hours he fixed it using a third-party program called "Outlook Recovery Toolbox." I'd actually downloaded that tool and fooled around a bit, but didn't use it for a full scan as I think that required a purchase, and
who knows if it's malware or what. Well, it worked.
So 15 hours lost. That cost me hundreds of dollars as I am self-employed, plus I have a $150 bill from the technician, which is more than fair for his two hours of labor
(the extra two hours were scanning and importing time). Again, Microsoft managed to turn into an epic ordeal what the consumer expects to be a straightforward upgrade process.
Now I have Outlook 2007, oh boy! The first thing I notice is the inflexible mail header above the message body. WTF is that supposed to be? Who was the Einstein who thought
that up? It renders USELESS like an inch of real estate right in the center of the screen! I find that it can be hidden (not, of course, with a simple, convenient and sensible right click ... oh NOOOO ... but through multi-click options available in the toolbar).
(For background, Outlook 2000 did not have that inflexible mail header -- the header info (subject, date, sender, CC) was part of the email, so if you scrolled down the
email, the header went with it and made the best possible use of available space).
Now here's a twist -- Outlook does not show, in your list of emails, whether an email has an attachment if the email was sent via Lotus Notes. That was a glitch in 2000,
and one I would expect to have been resolved in 2007. BUT NO. So, just moments ago, I have an email/meeting invitation sent from a client using Lotus Notes. Even though I had told Outlook to hide headers, it disobeyed me ...
why? Because this was a "meeting invite" email, offering me options, in that stupid inflexible header, to Accept, Decline, Propose New Time, & etc. Well, those options only increased the size of that inflexible header, so that the visible area of
the email WAS LESS THAN ONE INCH HIGH. Yes, I can adjust it -- how very productive!
These two Microsoft glitches / manifestations of poor design -- no alerting to attachments from Lotus clients and that horrid header -- very nearly conspired to cause
me to miss a critical attachment displayed only at the very bottom of the email. The document attached needs to be read and commented before the meeting, and only by the grace of God did I happen to scroll, IN THAT 3/4 INCH MAIL WINDOW, to the bottom and happen
to spot said critical attachment.
Do I expect anything more from Microsoft ... other than more grief and stupidity? Sadly, I do not. It is my misfortune in life to have to use Microsoft Word on a daily
basis, as I have for the past 10 years.
Before that, I used WordPerfect and what a wonderful program it was! I recall using WordPerfect to write and design one lovely graphical document in particular that earned
me an A+ in class. WordPerfect was so easy and powerful, with virtually no hassles—just gratification. Is it better to have loved (WordPerfect) and lost, than to have never loved at all?
Unfortunately, since all my clients use Word, I have to as well. Frankly, and I hope this isn’t against board rules, I am merely speaking the truth as I see it—Microsoft
Word is an utterly wretched application that has caused me untold grief and aggravation. Bulleting, text boxes, fickle fonts, the list is very, very long …. But it only gets worse!!!
The whole .doc .vs
docx is a complete debacle; the “Compatibility Pack” is a cruel joke. If I use Word 2000 on .docx documents, here are some of the inconveniences and frustrations that I encounter:
Bulleting function grayed out
Spelling errors not highlighted
Additional linespaces introduced into printed documents
Mysterious transposition of bold, italics and underlining
Inability to work with text boxes (“Error! Reference source not found!”)
Track Changes not accurately recorded
These are not incidental issues. I’m a spelling bee champion, but unless the spelling highlight function works, I am bound to have a typo or two in a 20-page document.
This affects the quality of my work and my livelihood.
To make matters worse, my Windows 7 often won’t find .docx documents. If I had worked on a .docx document something four months that I recall included the word
“Rumplestiltskin,” the Windows 7 Find function should locate it, but it does not.
I could go on and on. How about the dismal wireless connectivity in Window 7, vs. XP, which was virtually flawless. But I’m trying to catch up on the 15 hours that I lost yesterday thanks to Microsoft’s
awful Outlook troubleshooting and upgrade functionality.

Outlook 2007 and iPhone Calendar All-Day events not displaying correctly

I recently took the 3.1.3 update for my iphone and have since noticed that syncing all-day events from my Outlook 2007 exchange environment to the iphone is not working correctly. The all-day flag on the iphone is not being checked, thus the event shows up all over the calendar instead of just a single item at the top of the calendar. This only happens for multi-day events. Single-day, all day events show fine. Here's the tests I did:
1. Created a single day, all-day event for tomorrow June 18 in Outlook 2007. Made sure that they all-day checkbox was checked in Outlook. Waited for the sync and it shows up fine in iPhone calendar. There is a single line at the top of the "Day" view that lists the event. When you look at the event, the all-day checkbox is checked in iphone calendar.
2. Next I updated the event in Outlook to make it a multi-day, all day event. I changed the end date to be June 19. I made sure to leave the all day checkbox checked in Outlook. Once synced, the all day checkbox on the iphone is now unchecked and as a result the event takes up the whole "Day" view for both days.
Is there a solution for this? Only seen this since I updated to the 3.1.3 firmware. All events show up the right way in Outlook. It is only the iPhone calendar that shows them wrong. Thanks in advance for any help.

Same problem here.
All Day events entered in Outlook 2007 on my work machine that have ALL DAY checked and are only on that ONE Day, seem to come out fine. If however we have an all-day event that goes multiple days, then it enters it on my iphone taking up 00:00-00:00, which is very messy if you have two ALL-day envents on the same day (when tracking different personnel for example).
I have noticed the real annoying item though is that changing it on my iPhone 4 directly, that once I put in the right start and end dates, and choose ALL DAY, about 5 seconds later it actually changes the START DAY! This makes you go back to change the start day, then it changes the end day so you change that, and now finally all sorted.
This NEVER happened on my iPhone3G that I have used with Excahgne for over two years now. Only since I got my iPhone4.
PLEASE Apple, fix this!!!!

Can't sync Palm Centro and Outlook 2007/Windows 7 - please help!

Hello,
I've never posted on a forum, but I'm at my wits end...! I've been trying to get my Palm Centro to sync Contacts/Calendar/Memos to Outlook 2007 on my new laptop for a week now with no success. It used to sync just fine to my old computer with Windows XP and Outlook 2003. Then that computer crashed (my Outlook files were backed up on an external harddrive). I received my new computer with Windows 7 XP (32-bit) and Outlook 2007.  I've downloaded the Palm Desktop 6.2, Windows 2007 Conduit, and Software Update 1.03 (Windows installer) for Centro for Verizon.
When I sync my phone to my new Outlook, it completes all 12 steps, but does not load Contacts/Calendar/Memos to Outlook.  This is a list of the error messages:
   HotSync session started on 04/14/10 12:11:25, and completed in 100.0 seconds
Outlook Calendar synchronization completed with messages
Duration: 5.4 seconds
Outlook Calendar
Please set the option "Enable Synchronization when Outlook is offline" in UI inorder to synchronize in Offline mode
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Contacts synchronized successfully
Duration: 0.0 seconds
Outlook Contacts
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Tasks synchronized successfully
Duration: 0.0 seconds
Outlook Tasks
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Outlook Notes synchronized successfully
Duration: 0.0 seconds
Outlook Notes
OLERR:0C-000F (0x0)
OLERR:0D-0003
OLERR:0D-0001
- Not Synchronized
Media synchronized successfully Duration: 3.8 seconds
Backed up some files successfully to Backup Folder
Duration: 90.0 seconds
Backed up 9 file(s) successfully
AddressingLibRecent-HsCh
AddressingLibRecent-HsCi
Messages Database
PhoneCallDB
Cookie Data
AddressCompaniesDB
psysLaunchDB
Saved Preferences
AddressTitlesDB
Failed to backup 1 file(s) PmTraceDatabase Protocol Error: Handheld file could not be opened. (4004) SYNCERR_FILE_NOT_OPEN
Can someone please help me transfer Contacts/Calendar/Memos from my Palm Centro to my computer's Outlook 2007?
I've ready about 3rd party software in posts (Pocket Mirror), but I don't know if it applies here because the Contact/Calendar/Memo information is in my Centro - not in Outlook. I need to get it from my Centro to Outlook 2007.
Any help is greatly appreciated! Thank you!

hat wrote:
I have a Pre Plus and am using CompanionLink software. If the Centro is like the Plus (which I believe it is) it will not sync with Outlook. Here is a link to Companion Link:
http://www.companionlink.com/index.html
I have been using this and it works great. On their site you can choose the phone and the particular program you need to sync with and choose which you way you want to sync.
Hope this helps
Sorry hat, the Centro has absolutely nothing in common with a webOS device! It runs PalmOS. Nice of you to reply with your suggestion though!
@SyncHelpPlease: OLERR errors are covered in this Palm KB article:
http://kb.palm.com/wps/portal/kb/common/article/31167_en.html
Something I noticed in your post - you installed Palm 6.2.2 AND the 2007 conduit. Palm Desktop 6.2.2. has the 2007 conduits built into it already, and the patch is not needed. Whether this is the cause of your problems, I'm not sure, but I've fielded several posts of the same issue where the user did the same thing you did!
I'd suggest doing a clean uninstall, and reinstall of Palm Desktop 6.2.2 only.
I admit, I do not use Outlook, nor Win7, so I'm giving you my best guess at a way to solve your problem. Hopefully, this may lead to a solution!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Exchange/Outlook 2007 and Oracle Calendar Collaboration

Hi Guys!
I have a situation here in my incoming migration project. Is it really possible that an Oracle Calendar and Exchange/Outlook 2007 Calendar will collaborate or synchronize with each other? I only know that theres an Oracle Connector for Outlook in Oracle Collaboration suite, which will synchronize to Exchange/outlook calendar, but i didnt heard if the Exchange/Outlook Calendar will synchronized to Oracle Calendar simulataneously.
Please let me know if its possible or if theres a work around on this since we preferred them both to exists.
Thanks and i look forward on your replies.
Regards,
LRM

Same problem here.
All Day events entered in Outlook 2007 on my work machine that have ALL DAY checked and are only on that ONE Day, seem to come out fine. If however we have an all-day event that goes multiple days, then it enters it on my iphone taking up 00:00-00:00, which is very messy if you have two ALL-day envents on the same day (when tracking different personnel for example).
I have noticed the real annoying item though is that changing it on my iPhone 4 directly, that once I put in the right start and end dates, and choose ALL DAY, about 5 seconds later it actually changes the START DAY! This makes you go back to change the start day, then it changes the end day so you change that, and now finally all sorted.
This NEVER happened on my iPhone3G that I have used with Excahgne for over two years now. Only since I got my iPhone4.
PLEASE Apple, fix this!!!!

Outlook Recurring Meetings Never Fully Synch'd

Intellisync seems to be confused about my Outlook 2007 recurring meetings. I haven't deduced a definite pattern yet, but the basic problem is that the Tour 9630 and the Outlook calendar never seem to think they're synchronized. I have two-way sync enabled. I push the "Synchronize" button and I accept all changes. I then push "Synchronize" again and there are more changes. I accept all changes, but the next "Synchronize" shows more. This never seems to end. The changes seem to center around old instances of recurring meetings being copied from the device to the calendar. I tried the "Re-Sync" button on the "Confirm Calendar Edits" dialog, then I restarted Desktop Manager and Outlook, but the problem persists.

That's seems odd per:
http://technet.microsoft.com/en-us/library/jj688011.aspx
What is the user experience?
Have you followed all the decommission steps? Have you tried Move-CsConferenceDirectory:
http://technet.microsoft.com/en-us/library/gg412968.aspx
"When you create a dial-in conferencing Uniform Resource Identifier (URI), those URIs are assigned unique SIP addresses. However, SIP addresses are difficult to translate to devices that are not SIP-aware; for example, a public switched telephone network
(PSTN) telephone can’t translate a SIP address. Because of that, Lync Server uses conference directories as a way to help these devices locate, and connect to, dial-in conferences. This is done by creating a SIP conference directory that is associated with
each dial-in conferencing URI, and is identified by an integer value rather than a SIP URI. PSTN telephones and other devices can then use these numbers instead of a SIP URI when connecting to conferences; the directory number is included in the PSTN conference
identification users enter when connecting to a dial-in conference.
Occasionally, you might need to move a conference directory from one pool to another; for example, if you decommission a pool you might need to move your existing conference directories to a new location. The
Move-CsConferenceDirectory cmdlet enables you to move conference directories to a different pool."
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Can't Sync Outlook 2007 Calendar Data - Contacts OK??

Hi Folks
I've been trawling this forum and know of a few similar posts but none referring to the use of the current version of iTunes in combination with Outlook 2007 (Part of Office Enterprise Edition Plus 2007).
Since upgrading to MS-Outlook 2007 I can no longer sync my calendar with Outlook. This is very odd as iTunes spends a great deal of time telling me that's what it's doing, however in reality, all it's doing is sync my contacts over. This feature used to work OK with Outlook 2003 (before you suggest - I'm not looking to downgrade). Does anyone else experience this issue and have you found a fix?
F.Y.I.
iTunes ver: 7.0.2.16
iPod 5th Gen Rom ver: 1.2.1
Windows XP Pro SP2
McAfee SecurityCenter ver: 7.1
Many Thanks
Jay
(PS. Apple: PLEASE PLEASE, it’s about time you fixed iTunes not to freeze up so long or crash when it's busy. This never happened with iTunes 6.x!, this version is the slowest most crash ridden version I’ve ever experienced in the last 4+ years of iPod owning!),

Suddenly today this works...?? and nothing changed at my end? No idea why or what's changed. I assume MS have patched something in the background as I've not seen any updated versions to both iTunes or iPod.
Jay

Photoshop CS3 & Outlook 2007 - Can't copy and Paste

I've recently converted to win7 and office 2007. Under vista and office 2003 I could select an embedded image in an email, copy it to the clipboard, and then do a file/new in photoshop and paste the image. Every since going to vista and office 2007, this will not work. I can select the image and copy it, but photoshop cannot paste it. The paste command remains greyed out.
I tried copy and past into Microsoft Paint and that works. I tried copy and paste in Paint Shop Pro XI and that works. I tried copy and paste from Paint Shop to photoshop and that works. I just can't copy and paste from outlook 2007 to photoshop.
Is this another "feature" from microsoft?

I just made a quick test with Outlook 2007 and Photoshop CS5 64 and 32 bit on Windows7 64 bit.
From the embedded images that I tried in Outlook there are 2 kinds of selections, one that works and another that doesn't. I'm not familiar at all with designing emails and don't even know what programs, scripting, programing, etc is used for creating and designing emails (I won't mind if someone enlightens me) but when I right click on a image and choose copy on some of the images appear selection handles similar to the transformation box in Photoshop and I can even move the handles in Outlook as if it is going to scale the images but it does nothing at the end. When I copy images with such selection handles they cannot be pasted in Photoshop where Paste menu is dimmed, but can be pasted in other programs like Microsoft Paint and even in other Adobe programs like Illustrator, Flash, and Dreamweaver, but not in InDesign where pasting produced an empty text box. Then if I copy the pasted image from any of these programs I can paste it without a problem in Photoshop.
Now here's the trick, copy and paste works from Outlook to Photoshop if the image doesn't show these slection handlles when I right click and choose copy, but when it does, if I select it in a different way, like a text by dragging between before and end of image to highlight it, then right clicking and choosing copy works without a problem when pasting it in Photoshop.
Have you tried reporting this issue to Adobe? I have made feature requests in the forum for that on this site but I have never reported bugs and don't know what are the channels. If it hasn't been reported, I think they will be interested to know this issue.

Outlook 2007 - a never ending story?

Similar Messages

Maybe you are looking for