Outlook 2010 is not opened via OLE2 ABAP program, error is raised
I would like to start Outlook 2010 from an ABAP report, create an email and attach .pdf and .csv files to it. When I try to execute the following code I get a subrc = 2:
CREATE OBJECT outlookapp 'Outlook.Application'.
I have found 'SAP Knowledge Base Article 1570573 - Rich Client throws email error on Windows 7 with Outlook 2007 and Outlook 2010' but this didn't help me solve my problem.
In previous versions of Outlook this piece of code did work.
I'm using Windows7 64 bit with Outlook 2010 32 bit.
ECC Backend:
SAP_BASIS 700 0018 SAPKB70018
SAP_ABA 700 0018 SAPKA70018
best regards,
Roelof Jan
Hi Roelof Jan,
I'm facing the same problem. Did you find any solution for this?
Regards
Manuel
Similar Messages
-
I have Microsoft Office Professional Plus 2010. I've had issues with a problem in outlook where file was being generated in my PST folders everytime I opened outlook. I read where I should disable Norton Anti-Spam and it worked to allow me to delete the
folders and not get any new ones. I thought I should try uninstalling MS Office and reloading it. I used the Control Panel to remove the program but it only partially removed Office and stopped. I then used FixIt and removed more of Office and got most of
it but it stopped at the end too. I could not totally remove whatever remained of office but it looked like it was all gone. I also have Visio 2010 and Project 2010 and did not attempt removing those yet. When I tried to re-install office I got an error about
legacy groove SW that needed to be removed first. I couldn't find a way to do it. I then read I could do a custom install and install everything in office except SharePoint Workspace. I did that and it seemed to work. Everything worked except Outlook.
So then I added features to the suite by custom install of SharePoint Workspace only. All seemed to work. But Outlook still will not open. I get an error that states: Cannot open your default email folders. An unexpected error has occurred. MAPI was unable
to load the information service mspst.dll. Be sure the service is correctly installed and configured. I have Windows 7 Home Premium. What should I do?Hi,
Go to C:\Windows\System32 and double click on Fixmapi.exe, it won't give you any message, just reboot computer and try again.
If this issue persists, create a new profile in Control Panel -> Mail to check the result:
http://support.microsoft.com/kb/829918/en-us
If this issue still persists, we need to uninstall Office completely, then re-install it.
Once you finished uninstalling Office, please also delete the following registry keys:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook
HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\14.0\Outlook
HKEY_LOCAL_MACHINE\Software\Microsoft\Office\Outlook
Once the keys are deleted restart the computer and re-install Office, check if Outlook works fine.
Regards,
Melon Chen
TechNet Community Support -
Outlook 2010 will not open with icloud installed
Outlook 2010 and iCloud were working great together on my pc until about a two weeks ago. Then I could not open outlook 2010. Established new profile in Outlook without email address and Outlook opened. Downloaded iCloud and checked the boxes. When completed tried to open Outlook 2010 and it stopped at processing. Would not open. Removed iCloud from pc and Outlook opened. Is there now a conflict between iCloud and Outlook 2010. Still works great on my mac, ipad and iphone. PC, windows 7, office 2010
Hi tclarke2014,
Welcome to the Support Communities! The articles below will help you troubleshoot the issue you are having with iCloud and Outlook. In the links below, see the sections for Microsoft Windows (Microsoft Outlook):
iCloud: Troubleshooting iCloud Calendar
support.apple.com/kb/TS3999
iCloud: Troubleshooting iCloud Contacts
support.apple.com/kb/TS3998
I hope this information helps ....
- Judy -
PSE9 does not open – cannot initialize because program error?
Hello all,
I have Photoshop Elements 9 installed on my computer (MacBook Pro running Lion). However, I had not used it for a couple of months because I was using the CS6 beta, which finally expired. When I tried to open PSE9, the splash screen loads fine and finishes loading everything, but when it disappears I get a dialog of "Cannot open Photoshop Elements because of a program error."
This is while running on my main admin account. It opens normally on another admin account which I do not use often, except for some text encoding issues which were not present before.
I tried repairing permissions, but no luck.
Does anyone have any ideas? Thank you very much.Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down CMD + alt/option + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4: Remove tha TWAIN plug-in from that location and copy it somewhere else if you have moved it in past.
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-9.html
Now launch PSE and check if it works.
Any further info and clear steps would help further if not sorted. Also just to be on safe side if you can edit your admin name with normal letters (and not any localized one like in german or french) amd then try.
Thanks,
Garry -
CS6 Does not open file due to program error
I have been using CS6 for quite sometime with no much issues at all. All the sudden, today, without any changes being made in my computer (iMAC IOS 10.9) the software stopped opening files when I went FILE/OPEN and selecting the file to open (jpg).
CS6 opens "finder" and then quickly the finder window dissapears (so no time to make any selection,,this is not related to a type of file since...I can never get to even select one..) and the message "Could not complete your request because of a program error". The only option is to click OK and that is it....
I now need to go and open finder and then navigate through to the file and the right click and choose Open with CS6 (anf the file opens)....
Any ideas about this? like I said..nothing has been done (except the lates PS update a couple of days ago ver. 13.0
Thanks,
Alex ViademonteI tried reseting the Photoshop presets (which takes a lot of practice but
eventually got a "do you want to delete the Photoshop Presets" which I
did.... no changes with the behavior when trying to Open a location from
photoshop...
then I read about turning off Coverflow (but the only instructions I could
see were for Safari 4 ....and I'm running Safari 7".... anyway, is this
instruction supposed to be typed as one single instruction when accessing
Terminal ?
defaults write com.apple.Safari DebugSafari4IncludeFlowViewInBookmarksView
-bool NO
everywhere I look it seems as two separate commands like this... but
I couldn't get Terminal to type in two different lines.... so I typed
it altogether.
defaults write com.apple.Safari
DebugSafari4IncludeFlowViewInBookmarksView -bool NO -
at any rate,,, the problem is still there....
Once again, upgrading the software is NOT always a good idea.... clearly
the Apple guys ......got some issues here.... -
I am running OSX version 10.7.3 and Outlook 2010on a Mac Book Pro. When I attempt to open Outlook, it bounces and then flashes quickly on the screen but then quickly disappears.
Make sure Microsoft Office is up to date. You can do this buy going to Help menu and "Check for updates". If that doesn't resolve it I would recommend removing it and reinstalling it.
-
Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.
Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.
-
Period 001/2010 is not open for account type S and G/L 799999
Hi friends
I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display The specified year 2009 is not the current calender year.
Thanks
RajHi
Hope you are doing this in test server
If this is a real time issue this needs to be addressed by a FI consultant
First see for your company code what is the posting period varient maintained in OBY6
Say if it is 1000
Then in OB52
Maintain a setting like this
1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
Then save it
This is for Account type S that is GL accounts
Preferably maintain the same for A, + , D, K, M, V
Regards
Raja -
Exchange server 2010 console not opening, inialization failed
hi,
exchange server 2010 console not opening, inialization failed when i have upgraded service pack to sp1.
please suggest asap or u can reach me @
[email protected]
[email protected]
+918750003544Even I found the same issue once, and then I realised that the SP and RU should be same in exchange sever and the machine where the issue is.
Could you please check the same if that machine has the same Sp and RU, if not, please upgrade the same? I bet it will start working
Regards,
ASP20
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks. -
Outlook 2010 does not receive rss messages
Hi,I have recently uninstalled a freeware VPN.
After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
I keep receiving error code: 0x800c0008
I made sure that it is properly uninstalled.
Thank you for your help!Hi,
Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
whether you would still receive the error code anymore.
More information: http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
The following KB could help you solve your issue.
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
http://support.microsoft.com/kb/813514
In addition, I would like to suggest you ask this in the Outlook Forums:
http://social.technet.microsoft.com/Forums/en/outlook/threads
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
Powerpoint 2010 will not open any old files
Hi Guys,
Just installed Office 2010, everything works fine except for the PPT issue. I download .ppt files from my school to take to class, but Powerpoint 2010 will not open these files.
The first window says " powerpoint has found a problem with content in xxxx" and the option is given to repair. After repair is clicked , a message saying "there was an error accessing xxxx" appears.
This is for all ppt and pptx files on my computer, but the program can create, save and open new files. Anyone have any suggestions?
p.s. the files worked fone with office 2007Everyone I got it. Finally i have the solution for all of you. A permanent solution easy and WORKING. No need to frustrate and be unblocking all the time. I Hacked it!
Steps:
1.
Click - Start
2.
Click - Control Panel
3.
Click - System And Security ( you can also search for it )
4.
Click - View Installed updates ( under windows updates )
5.
Click- Scroll down until you see the Microsoft Office Updates
6.
Uninstall all Microsoft office updates except for Add in, and Definition Update for Microsoft Office 2010 (KB982726)
7.
Now open any Microsoft Office Power Point File
8.
There you go solved!
Hope
it doesn't bother you anymore. Please say thanks and reply if it was helpful or no. Enjoy... -
Outlook 2013 is not opening.
Hi,
Today ,i have faced an issue in outlook 2013.We are using an outlook 2013 as a POP account.When i try to open the outlook it is not opening.It is showing the message the location of the path is moved to DIFFERENT LOCATION/RENAME/DELETED
I tried to open the control panel to check whether the MS-office is uninstalled or not? But even control panel and other installed programs is not opening and responding.But i can able to open the hard drives of C path & D path folder without any
issue.
I shutdown the computer for half-an-hour.After Half-an-hour,i started the computer again and i can able to open the outlook 2013.It is working and downloading mails without any issue.
Please let me know why the issue arises in outlook 2013.It should not happen again in outlook 2013.I Kindly request you to provide a suitable solution for this at the earliest.
Regards
Pradeep.R...Please let me clarify what type of back ground process was running at that time.
The same reply was informed to my Team Head and he is not accepting .
Hi Pradeep.R,
As per your description above, I think it's not an Outlook specific issue as you also observed that "even control panel and other installed programs is not opening and responding"
There is no way for us to know "what type of back ground process was running at that time". I would suggest you to check in the
Event Viewer and see if there is any log recorded during that time period. That's the only way to track down the issue I think.
If you would like us to help analyze the logs, you can send the log file to this email account:
[email protected] and inform us here (the email subject should be the link of this thread).
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Lync 2010 Will Not Open Anymore
The problem is happening so far on three Windows 7 computers that used to be able to open Lync, but not anymore. Click the program icon to launch the program and the sign in box appears but Lync stalls at contacting server and signing in. A Lync message
appears, "Cannot sign in because the server is temporarily unavailable. If the problem continues, please contact your support team."
Steps taken to resolve
1) Verified the certificate hadn’t expired
2) Deleted communicator folders in both folder locations, c:\users\username\app data\local\microsoft and c:\users\username\app data\roaming\microsoft
3) Deleted the SSID folders
4) Tried the manual configuration to connect to Lync by entering the sip domain name for the internal and external server names
5) Restarted pc, and also shut down the pc.
6) Logged onto a different pc as myself and Lync 2010 opens for me. When another end-user log onto my pc, they duplicate the same issue with Lync stalling and not opening and receive the same error message.
7) Uninstalled and reinstalled LyncHi,
Please double check if the client trust the CA that issued the certificate on Lync server.
Please disable firewall on your issued local workstation to check if the issue caused by ports.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!
Only the carrier it is locked to can authorize unlocking it. Contact them.
-
My Microsoft Word Starter 2010 will not open
My Microsoft Word Starter 2010 will not open at all. Every single time I click on the icon in the start menu or on the desktop, this window opens and says "Click to Run Configuration Failure". What does that mean. Why won't it open? Please help
me, before I start uninstalling things in my control panel.Hi,
When you see the error "Click to Run Configuration Failure", please try a repair of the install from Control Panel -> Programs and Features:
http://office.microsoft.com/en-us/excel-help/update-repair-or-uninstall-office-click-to-run-products-HA010382089.aspx
Or we should re-associate Office file, such as .docx file:
1. Open Default Programs from Control Panel\Programs\Default Programs.
2. Click Associate a file type or protocol with a program.
3. Click .docx file type.
4. Click Change program.
5. Choose Microsoft Word as default program.
6. Click OK.
Moreover, if the steps above don't help, you can also refer to this link, whose solution has helped some users:
http://triplescomputers.com/blog/casestudies/click2run-configuration-failure-when-office-2010-starter-is-launched/
Regards,
Melon Chen
TechNet Community Support
Maybe you are looking for
-
Can I open .ai file w/ text editor and edit linked file path?
I want to relink a placed file in a lot of illustrator files to a new file with a different name. I've tried setting up various actions but it is not doing what I need. If I open the file in a text editor such as Notepad++ or Text Wrangler, I can fin
-
How Do I Install Apple Drivers For Windows XP?
Okay, so I have a 15 inch mid 2012 MacBook Pro that is running OS X Mavericks. After many attempts, I managed to install Windows XP 32 bit as a secondary operating system on the HDD using Disk Utility. The only devices that Windows XP recognised upon
-
Blue lines in black areas using external monitor
I am running my 13" MB Pro hooked up to a ViewSonic LED LCD Monitor (VX2250) (DVI link using generic knock off mini-display to DVI adapter). The problem I'm having is that black areas on the monitor will have fuzzy horizontal blue lines running throu
-
Report Painter - Characteristic cannot be combined with key figures
Hi, I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone
-
We are creating a repository within 8i for many different docs and wish to use interMedia to do this so we can search. The docs will be viewed/added through interMedia Web Agent. Do I have to create a new object type with associated methods to be abl