Outlook 2010 does not receive rss messages

Hi,I have recently uninstalled a freeware VPN.
After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
I keep receiving error code: 0x800c0008
I made sure that it is properly uninstalled.
Thank you for your help!

Hi,
Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
whether you would still receive the error code anymore.
More information: http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
The following KB could help you solve your issue.
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
http://support.microsoft.com/kb/813514
In addition, I would like to suggest you ask this in the Outlook Forums:
http://social.technet.microsoft.com/Forums/en/outlook/threads
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

Default account setting in Outlook 2010 does not work when composing new messages?

Hello,
I am currently using Outlook 2010 (not beta). I have two accounts, a google imap account and a pop3 account. I have designated my IMAP account as my default account. As I understand it, this means that when I create a new email,
it should default to being sent from my IMAP account. However, whenever I create a new email, it defaults to the account which I am currently viewing in Outlook. In other words, if I am currently viewing the pop3 inbox, when I compose an email,
it will default send from that account. Conversely, when I compose an email while viewing the IMAP inbox, it will default send from that account.
Any ideas as to what is going on? This is rather frustrating because I only rarely send with my pop3 account--only when replying/forwarding email received with that account or other unique situations. Is there a way to make Outlook be true to
sending from the default account, without doing something drastic like disabling the secondary account?
Thanks in advance.
Rom

Of course it's a bug.
Computing Dictionary
bug definition
programming
An unwanted and unintended property of a program or piece ofhardware, especially one that causes it to malfunction.
The behaviour itself may be considered a feature by Microsoft, though I disagree, but the fact that one thinks one is specifying a "default" account that is not then used as the default in all cases is clearly a bug.
It is astonishing to me that in the plethora of options, advanced options and advanced advanced options there is not a checkbox to enable this new behaviour with the default being unchecked.
Microsoft does it again.

Blocked Senders feature in Outlook 2010 does not work

I have a specific blocked sender
[email protected] listed in my Blocked Senders list, but emails from that email
address still go to my Inbox instead of the Junk E-mail folder.
We use Exchange for email, and Outlook 2010 as the client.
Note: this sender is blocked for a specific sender that he configured through Junk E-mail Options in Outlook 2010, and this sender is not blocked at the server level.
I only have one account set up in Outlook.
What do I need to do to get Blocked Senders / Junk E-mail working in Outlook?
Thanks,
Elizabeth

Hi,
From your description, I suggest you try to check the total size of blocked sender list. As total size of all lists combined cannot exceed 512K. Once the 512K limit
is reached, Outlook alerts you and additional addresses aren't saved until you remove some from the list.
If your issue is caused by the limited size, you can add a new registry key value to the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem\
Add a new DWORD value of Type Max Extended Rule Size and edit the Value Data, entering the maximum size (in bytes) you want to allow.
If your issue is not related to limited size, try to keep your junk e-mail filter updated. Each version of Microsoft Outlook that contains a junk e-mail filter receives updates to the data
file (outlfltr.dat) as part of the Microsoft-wide monthly update released on the second Tuesday of each month. The updated outlfltr.dat is the result of the evaluation of hundreds of thousands of spam messages and constantly increases the filter “catch”
rate for incoming junk email.
The recommended way to obtain updates to the Outlook Junk E-mail filter is by turning on the Automatic Updates option in the Windows Security Center.
If you have done all above but it still not work, try to create a new outlook profile to test this issue.
Go to Start > Control Panel, click Mail. The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different
existing profile, click Show Profiles, select the profile name, and then click Properties.
Click Show Profiles. Choose Prompt for a profile to be used.
Click Add.
Type a name for the profile, and then click OK.
Start Outlook, and choose this new profile.
Sincerely,
Harry

HT201436 My phone does not receive Voicemail messages.

How can I get my phone to receive Voicemail messages ? I have backed it up and it has the latest version of iOS 7.1.2

What carrier? If your carrier doesn't support visual voicemail, the phone should still display the number of unplayed voicemails and call in like older phones did. If it's not doing that, or your carrier is supposed to support visual voicemail, you'll need to contact the carrier.

Outlook 2010 does not accept password & prompts repeatedly for a password

I'm trying to configure an exchange account. I can access the account on outlook.office365.com & my phone. After I enter my user name & password & click next, a Windows Security window opens up ( the window says Mail Application, connecting
to my username, remember my credentials) asking for my password. When I enter My password it is not accepted and prompts repeatedly for a password. When I cancel a Microsoft Exchange window pops up with the microsoft exchange server address & my mailbox.
Checking the name opens up the Windows Security windows & My password it is not accepted and prompts repeatedly for a password. I also get an error message: the name can't be resolved. Connection to MS exchange unavailable.
Any suggestions will be appreciated.

Hi,
For the issue of save password setting not retained in Outlook, I would suggest you to follow the steps mentioned in below KB article and see if it helps:
http://support.microsoft.com/?id=290684
For the specific error message you mentioned in the post:
"the name can't be resolved. Connection to MS exchange unavailable)"
Usually, it means there is something wrong on your Exchange server side, I would suggest you to check with your mail administrator on this.
More reference about this Outlook error message:
http://www.msoutlook.info/question/531 (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Thanks,
Ethan Hua CHN
TechNet Community Support

Contact uses a tracfone, does not receive text messages but sent messages show on iPhone 6

As recently as 2 weeks ago, text messages where working to and from this contact. His carrier with Tracfone is AT&T.
I've already done some troubleshooting:
I am able to receive messages from my contact with the Tracfone, and it appears to send the message. But he never receives it.
He is able to send/receive messages from other contacts - including contacts with plans, and contacts with straighttalk/prepaid.
I am able to send/receive texts from other contacts - including those with plans and those with prepaid.straighttalk/prepaid.
He is not able to receive a group message from me, although other contacts do.
I am able to send/receive group messages from other contacts - including those with plans and those with prepaid.
I have tried with iMessage turned on and with it turned off.
I have tried with MMS messaging turned on and with it turned off.
I've verified the number is not listed as blocked.
I've deleted and recreated the contact and verified the number is correct.
Cellular data is enabled, as is LTE voice & Data.
I have service, and have not received any red exclamation points indicating failed to send.
I've already tried turning the device on and off.

Bunifufu, we appreciate you providing us with your phone type details. That is definitely odd that this is occurring. Just in case, what type of phone does the other user own? While it is strange they aren't receiving your messages, and that your phone displays sent. (Especially if the other person uses an iPhone and iMessaging too) There may be an issue on their end if it is indeed sending correctly on your end. NicandroN_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Outlook 2010 does not appear in Sync list

I am trying to sync my Outlook 2010 contacts using BB Desktop Manager. When I go to Address Book Setup to select the desktop application, I am offered a choice of Outlook Express as well as some others. However, Outlook (not Outlook Express) is not listed. I tried to use the OExpress option, but this did not work (it is not installed in any event).
Any thoughts on how I can solve this?
thanks!
(PS: using a BB Curve 8520)

Hi and Welcome to the Community!
Please see this KB to see if it applies to your situation:
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sync with Outlook 2010 does not work

While it seems to work, showing the normal progess bar in iTunes - taking some time and feels like normal, no data is transferred from or to outlook.
No difference with Outlook x32 and x64, iTunes is 10.2.2 x64.
Reinstalled office and iTunes several times, making empty outlook.pst etc. but still i can't get data from the phone to outlook.
Any ideas would be aprreciated.

RIM has formally announced that support for Outlook 2010 will be available this month. I've heard rumors of August 10th but that's not official. Regardless, a new Desktop Manager will be released very shortly to add support for Outlook 2010 and some other great features.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Outlook 2010 attachment not received

Hi,
in a system with Windows Server 2008 and Outlook 2010 I'm facing this problem: mails are received always without attachment. The problem occours with both Exchange and simply POP/SMTP mail accounts.
I've already verify that mails are always sent with HTML format (no RTF).
The problem is appeared after last week updates.
Anyone has faced this problem or have some information about some issues with new updates?
Thank you!!

Hi,
Try to send and receive the emails via OWA and Webmail only, check if the attachments exist.
I have noticed some issues have occurred since the February 10, 2015 update for Outlook 2010 (KB2956128), but this symptom is the first time to be seen. To verify if your issue is related, uninstall this update temporarily to check the result.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2010 does not appear as an option in IntelliSync

I am trying to sync my calendar with Outlook 2010 (32 bit). When I go into DM 6.0 calendar setup, only ASCII and Yahoo! appear as available decktop options. How do I get DM to see my installed Outlook so that I can sync? Thanks!
Tech info:
DM v6.0.0.43
Storm 9530
Windows 7 (64-bit)
Outlook 2010 (32-bit)
My ultimate goal is to sync to Google calendar so I can view online, by syncing to Outlook, I can then export and upload to Google. Please let me know if there is an alternate way.
Thanks!

You might give this a try:
http://www.blackberry.com/btsc/KB02362
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Deleting a contact list item through Powershell in sharepoint 2010 synced with outlook 2010, does not delete the item from outlook.

hi All,
I have a requirement for updating the contact list from CSV file and updating/ adding and deleting the changes in the SharePoint list using PowerShell script. List is also synced with outlook.
The problem arises, when we delete an item from the list using PS, the item (which was earlier synced with outlook) is not getting deleted from outlook.
Strange behavior : when we perform the same deletion operation manually from the SharePoint UI, every thing works fine as required.
Please refer the below PS
#Adding the records from SharePoint not in CSV file
if($flag -ne 1)
Get-Member -InputObject $csvRow -MemberType NoteProperty | ForEach-Object {
$property = $_.Name
$newItem.set_Item($property, $csvRow.$property)
$newItem.Update()
#Deleting the records from SharePoint not in CSV file
CreatePSLog "Deleting the records from SharePoint not in CSV file"
foreach($itm in $List.items)
$del = 0
$items | ForEach-Object {
if($itm["SAP Ansprechpartnernr"] -eq $_."SAP Ansprechpartnernr")
$del++;
if(!$del)
$List.GetItemById($itm.Id).Delete()
$List.Update();
$Web.Update();
many thanks in advance, Please suggest as I am completly stuck on this :(
Regards, Arun kumar

Hi Kumar,
Please remove the codeline $List.Update();, then run your code again, it works for me.
You may need to firstly delete the synced contacts list within Outlook to remove those undeleted accounts, then re-connect the SharePoint contacts list to outlook, then run your modified Powershell code.
Thanks
Daniel Yang
TechNet Community Support

Why does my iphone not receive group messages if there is a non iphone user in the group?

I Have an iphone 4 with the latest update. Whenever anyone sends a group message to me when there is a non-iphone user in the group, my phone does not receive the message. I've tried restarting and it doesnt work. i have sms messaging turned on. Any help would be greatly appreciated

iOS: Understanding group messaging
http://support.apple.com/kb/HT3529
http://support.apple.com/kb/ts2755

All of a sudden I can not receive text messages on my MOTOX. Does anyone know how to solve this problem. I can send them, but can't receive them.

My MOTO X was working fine, then all of a sudden, I can not receive text messages. I have checked the settings and they look correct to me, and I have done everything the web site recommends, except wiping the phone and starting over, to try and fix it. Has anyone else had this issue, and how did you resolve it?
Thanks so much.

That's strange that your Moto X wont receive any text. Thank you for trouble shooting the issue. Let's see what's going on! Does your device have any physical or liquid damage? Does anyone else have an issue with calling or texting? What zip code are you in?
VanetrisC_VZW
Follow us on Twitter @VZWSupport

I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Parked document 1000 700010042 2010 does not exist, Message no. FP076

Hi,
There is one Document which is not on tax return but made a entry in a GL account (VAT).
When I display document from FB03 for fiscal year 2010 the transaction code FB03 is diverting to FBV3 and giving error message : "Parked document 1000 700010042 2010 does not exist" "Message no. FP076"
I also checked the tables "BSEG" & "BKPF" where this document is visible to me also I checked the GL line items from FBL3N for the VAT GL where this document is showing in line items report, but when i double clik to display this documents again am getting screen of FBV3 with the same error message.
can any one let me know what could be the problem? and how to resolve this issue?
Many thanks in advance.
Regards,
Abdul

Hi Venkata,
Thanks for the information....
Addition to the above information ... there are 3 line items are there in this document 1 - K (Vendor), 2 - S (GL).
The strange thing I can see is against 1st line item (K-Vendor) there is a clearing document updated.
So if there is a clearing document against vendor line that means this document is no more in parking ...
I am not sure why system is performing like this...
Can anyone help me on this ....
Thanks in advance.
Regards,
Abdul

Outlook 2010 does not receive rss messages

Similar Messages

Maybe you are looking for