Outlook 2013 installed in English only- But Showing a Strange E-mail Archive Folder, in a Different Language

Dear Outlook IT Professionals:
Has anyone experienced seeing a strange e-mail archive folder (in a different language, other than English), within an English only version Outlook 2013?
Basically, I found an e-mail archive folder, which is in another language, in my e-mail Inbox; that I did not create, and its properties seems to be hidden. Therefore, I am unable to see the archive folder's attributes. This Microsoft Outlook
was installed the English language only, but the language of the archive folder is either Japanese, or Chinese.
I have disabled RSS Feeds, even before seeing the strange archive folder, then I just verified that it is still disabled; so this cannot not be the culprit.
I don't want to automatically assume that this is a security issue, so any logical technical explanations/suggestions would be greatly appreciated.

Hi,
Security programs may cause such issue, please temporaily disable all your security programs to check the issue again.
In addition, we can start Outlook with /cleanviews switch in case it is caused by a corrupt view. To do this, exit Outlook, press Windows key + R, type
outlook.exe /cleanviews in the Run dialog and press Enter.
Also try /resetfoldernames switch to check the result. Use it with the same way above,
outlook.exe /resetfoldernames.
Hope it helps.
Regards,
Steve Fan
TechNet Community Support

Similar Messages

ICloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

iCloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Mail Archive folder showing empty

I posted this question yesterday but didn't specify that the Archive folder I was referring to was in Mail. I can't understand why the folder is showing as empty on both my iMac and MacBook Pro (Mavericks) whilst the same folder shows all its content on both my iPad and iPhone (IOS7). I have tried Rebuild, but that doesn't work. Has anybody out there got any suggestions? I would be so grateful.

Oh and any idea why some of my TRASH folders are shown as a trash can and the others as a circle?

When I select files to archive, they move from my file folder, but then I go to the archive folder and it says Empty? Where are those files?

When I select files to archive, they move from my file folder, but then I go to the archive folder and it says Empty? Where are those files?

Your account names are probably different on the two Macs. If you know the UNIX command line, open a terminal window and run:
$ id
You should see a line that starts with something like this:
uid=501(your_user_id_here)
now check the owner of the folder you copied over:
$ ls -ld Music
drwx------+ 8 some_user_id_here staff 272 May 14 16:08 Music
Do the IDs match? If not, you could change the ownership. Say your id is "johnsmith"
$ chown -R johnsmith Music
Now try and access it with iTunes.

Outlook 2013 taking long time start but in safe mode not

Hello!
In our company we started to use Outlook 2013 clients, several users are contacting us because Outlook 2013 needs about a 1 minute or more to show that is loading the application / "Loading window":
If the user by mistake try to open Outlook again, pops the next message:
"Sorry, we're having trouble startind Outlook. Only one version of Outlook can run at time. Check to see of anopther version of Outlook is running, or try restarting your computer."
And also appears another one with saying:
"The operation failed due to an installation problem. Restart Outlook and try again. If the problem persists, please reinstall."
After that if they try to open again Outlook, Outlook suggest to open it in "Safe Mode".
If they clic on "Yes" Outlook starts very fast but if they click on "No" takes about 1 or 2 minutes to pop the Outlook "Loading window"
As in Safe Mode loads quick, we tried to disable all the Addins in Outlook but didn't resolve the issue.
Also tried to repair and reinstall the Office package, create a new local profile with new OST file.
The issue happens to diferent email/user accounts and computers.
We are working using Exchange configurations, and our build is W7 x64 enterprise, office 2013 32bits Standard.
Thanks for your help!

Hi,
If you don't mind modifying the registry keys, you can try the following steps:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
Start -> Run -> type in regedit.
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common (or HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook )
Right-click on Common -> New -> DWORD Value. Name it UserData.
Double click on the DWORD value that you just created (i.e. UserData) and set
Value data: to 1.
Close the Registry Editor and open Outlook again.
This helped some users and please let me know the result.
Regards,
Melon Chen
TechNet Community Support

In outlook 2013 emails,pdf attachments are not showing in pdf formats

Hi,
We are using outlook 2013 as pop account for our official email communication.One of the laptop is having windows 7 professional operating systems and the email we are using as outlook 2013 in that laptop.
The issue is that when we try to attach the pdf documents in outlook 2013,it is attaching but it is not showing in pdf format and it is showing as notepad or word file.
when we try to open the notepad ,word file,it is opening in pdf format and also the client is receiving in pdf format.
If we attach the pdf document in email,it should show in pdf format.
Some settings are changed and i need your support to fix the issue.
Regards
Pradeep

Hi,
Are the PDF files showing with the PDF icon or other icons in your local disk?
Please start Outlook in sate mode and test again. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
In addition, you may also try to clean out the Temporary Outlook Files folder to check the result. See:
http://www.howto-outlook.com/faq/securetemp.htm
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT2371 everytime my apps need to be install .. it keep going to a different language when i keep it in english for everything .. and i dont understand why it have a different language when my default is english.. it only happen when the app want me to acc

for ex:
i go into family feud and when i sign into facebook it have a different language.. and my default is english .
it does that to every app i have.. and sometimes my browser is a diff language..knowing my ipod is english

united state of america. new york city and app store the one that came with the ipod touch

T410 RAM installed 4.00 GB but shows usable 3 GB - Windows 7 64 bit

Hi Friends,
I have Lenovo Thinkpad T410 with Windows 7 (64-bit).
The RAM I have is 4 GB, but it shows usable as 3 GB only.
As per my knowledge 64 bit shouldnt' have any limitation of 3GB max RAM.
Could any one help me if I need to make any configuration cganges to maike 4GB usable.
Even in BIOS I could not find any setting for this.
Thanks in advance.
Regards
Vamshi

The slots are not always together. On newer machines like the T410 and my T420, there is one slot under the keyboard and one under that bottom access panel.
Hardware Maintenance Manual
This actually makes it easier to upgrade RAM in some cases. When a new machine is ordered with a single stick of RAM it will be under the keyboard, leaving the easily-accessible one on the bottom available for another RAM stick.
My T420 has the factory 4G stick under the keyboard, and a 2nd Crucial stick on the bottom. Works a treat.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Cannot send email from outlook 2011 (Mac) on public networks but can send via Mac Mail

I cannot send mail with Outlook from anywhere other than my work or home network, will not work even when accessing 4g with my phone hotspot; very frustrating. I am using Yosemite & Macbook Pro (2012). if i use the Apple Mail everything works fine so I can only assume it is a setting on Outlook?

Update - I now have it working.
am not really sure what exactly fixed it.
I changed a lot of things but my setup now has the following which I think fixed.
outgoing server - p06-smtp.mail.me.com
override default port checked - port now 587
on more options button changed it to "use incoming server info".

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

HT1430 i have recovered, reset and restored and i only get the screens that page through with all of the different languages of HELLO. is there another fix?

i have tried everything recommended. (RESET, RECOVER and RESTORE), i still cannot get the IPAD to activate.
is there any other thing i can try?
thanks

The Hello page is the beginning of the Setup procedure. What happens if you follow through the Setup?

Some Outlook tasks only showing up in Outlook Web App, even if they were entered in Outlook 2013 or on the iOS email client.

A user creates tasks in Outlook 2013, his Exchange email account on his iPhone and in the Outlook Web App (Not Outlook.com). A small number of these tasks will only show up in the Outlook Web App, though, no matter which platform he entered the
task from. He can enter a task in Outlook 2013 and it might not show up on the task list in Outlook 2013 or IOS after that, but WILL show up in the outlook Web App task list.
At first I thought sorting was the issue, but we compared all tasks in both Outlook 2013 and OWA, sorted by due date, and, sure enough, some were missing from 2013.
What I am not sure of:
If/how long a task will be visible on the platform it was submitted before it begins only appearing in OWA.
How long ago this started
I couldn't find this issue in the community or with a quick google search.
I am going to see when he is available to sit down and go through tasks to see if there is a pattern and try replicate it so I can see how long it might be available on the submitting platform before disappearing.
I can provide any other info needed. Thoughts on this issue?

Hi,
I would suggest you reset the view if you found some tasks in Outlook missing.
VIEW tab -> Reset View.
Or we can simply start Outlook with the switch "/cleanviews"(Restores default views. All custom views that you created are lost):
Press Win + R and type “outlook.exe /cleanviews” in the blank box, then press Enter.
Check if this helps you find the missing tasks.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

Hi-
Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server. OWA and mail routing (internal and external) is working fine. I've even tried on multiple machines
and all of them experience the same issue. On a new machine with a fresh version of outlook 2013 installed here is what happens:
Click on Outlook 2013
Click Next until the account setup is displayed.
Name and email is auto-populated
Established network connection is good
Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
And then the logging onto the mail server fails. The first pop-up is:
The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
Mailbox which is populated with: =SMTP:<Valid Email address>
On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start. Starting the service outputs:
EventID 7024
"The Web Management Service terminated with the following service-specific error: Unspecified error"
Not really helpful :)
Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
Thanks in advance!

Hi
I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
RunspaceId : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
Server : PW-SC-01.companyname.local
MonitorIdentity : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
RequestId : 75641e34-aa49-4fce-aad7-181b56dd7b29
ExecutionStartTime : 10/11/2014 13:50:03
ExecutionEndTime : 10/11/2014 13:50:03
Error : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion:
RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
Exception : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable)
from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr&
contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
PoisonedCount : 0
ExecutionId : 63105129
SampleValue : 33.5194
ExecutionContext : Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 10/11/2014 13:50:03
- TaskFinished = 10/11/2014 13:50:03
- Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC
server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsy
FailureContext :
ExtensionXml :
ResultType : Failed
RetryCount : 0
ResultName : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
IsNotified : False
ResultId : 1748063
ServiceName : InvokeNow
StateAttribute1 : Momt
StateAttribute2 : UnknownIssue
StateAttribute3 : PW-SC-01.companyname.local
StateAttribute4 : Unknown
StateAttribute5 : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
StateAttribute6 : 0
StateAttribute7 : 0
StateAttribute8 : 0
StateAttribute9 : 0
StateAttribute10 : 0
StateAttribute11 : Momt
StateAttribute12 :
StateAttribute13 : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
StateAttribute14 :
StateAttribute15 :
StateAttribute16 : 0
StateAttribute17 : 0
StateAttribute18 : 0
StateAttribute19 : 0
StateAttribute20 : 0
StateAttribute21 : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
StateAttribute22 : EMSMDB.Connect()
StateAttribute23 : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
StateAttribute24 : Negotiate
StateAttribute25 : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect();
Identity : fcd6159dd8fe42aebf10100cc4934356
IsValid : True
ObjectState : New

Outlook 2013 and read only IMAP database.

We use GFI Mailarchiver's IMAP Server to give our employees access to their archived items. The IMAP server is read only mode as no one should be changing their archived mail. This worked flawlessly under Outlook 2010 and prior.
We have now deployed our first 2013 client and have now found that it is trying to write to the read-only database when forwarding or replying to a message that was found in the archive. My thoughts are that Outlook 2013 is try to modify the message in
the archive with the "you forwarded theis message on September 11, 2014 at 2:15pm" this causes Outlook to give the message "You cannot make changes to contents of this read-only folder.". The message seems like a nuisance only
but when you dismiss the message and try to close the forwarded or replied to message, you the the same message again and the only choice is to kill Outlook from the task manager.
Has anyone used Outlook 2013 in a read-only IMAP environment? Is there a setting to turn of the updates that Outlook is trying to make to the mail store?
Rob...

Hi,
Since you are using GFI Mailarchiver's IMAP Server, I'm not able to reproduce the issue or provide accurate suggestions in this case.
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook 2013 / Exchange 2013 : Shared mailboxes - Mail stuck in outbox (non-cached), Mail sends but doesn't get received (cached).

Hello,
We are currently experiencing some weird behaviour in Outlook 2013 since we added Shared Mailboxes.
When we run Outlook 2013 with cached mode
enabled:
- I create a new e-mail and send it.
- The e-mail goes to the outbox, and get's 'send'.
- None of the recipients receives the e-mail.
When we run Outlook 2013 with cached mode
disabled:
- I create a new e-mail and send it.
- The e-mail goes to the outbox, but remains there.
Now to make things even more bizarre:
When I switch from 'cached'-mode to 'non cached'-mode, I see all the e-mail that were 'send' in cached-mode stuck in the outbox.
Note: The DNS server configuration in Exchange is correct.

Hi,
How about sending on OWA? Does the issue exist?
To troubleshoot the issue, let's run Outlook in Safe Mode to determine if 3rd-party add-ins are related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem sending emails in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
Please also disable the firewall and anti-virus program to send the emails again, in many scenarios the protection may cause the issue.
Please also keep Exchange and Outlook patched to the latest.
Regards,
Melon Chen
TechNet Community Support

Outlook 2013 installed in English only- But Showing a Strange E-mail Archive Folder, in a Different Language

Similar Messages

Maybe you are looking for