Outlook 2013 Rules "Which Rules Do You Want To Keep - Client or Server"

Ever since I upgraded to Outlook 2013, whenever I run my morning Rules on our companies public folder, I get a pop up box asking "Which Rules Do You Want To Keep" and the choices - "Client or Server" So naturally I run the rules that are stored on the
server and all my rules are run properly. But its a bit of a hassle that it makes me click that every single time I run the rules (sometimes several times per day) even though they are the exact same rules I ran on Outlook 2010 and I was never asked. Im wondering
if there's a way to set this choice permanently so I dont have to make the choice daily. Even when I make a new rule it asks me this question, even though the new rule isnt stored in either location at that point.

This behavior occurs because a copy of the rules that  you created for this Exchange mailbox is stored in your local .pst  file. When you start Outlook and access your Exchange mailbox from computer B, Outlook expects rules. However, the rules
are  not  present because they are stored locally in the .pst file on computer A.
To resolve it, we may Deliver new e-mail to a new location. (In Outlook 2013, there is no "change folder" option in Account setting. If you are using PST as the data file, please create/set another PST as default to have a try)
These issue may also caused by the following conditions:
1. Two Outlook Computers Are Connected to the same Microsoft Exchange Server Mailbox
2. Different Versions of Outlook Connected to the Same Exchange Server Mailbox
You may go to the link below to get more information. Thanks.
http://support.microsoft.com/kb/287640
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

  • Which library do you want Aperture to use?

    I always get the question "Which library do you want Aperture to use?" when I start Aperture.
    Switch to Library only shows libraries I've used since I started Aperture. The list is empty if I restart Aperture.
    Why?
    I have re-installed Aperture, verified disks and permissions, repaired and rebuilt libraries, but nothing has helped so far.
    I have other issues too that might have connection to this one. See http://discussions.apple.com/thread.jspa?threadID=2559320&tstart=0 for a description.
    Thanks!

    Not too sure what is causing this for you, however here is a work around.
    Place your library in the dock and rather than launching Aperture via the Ap icon, click on the library icon, this additionally has the benefit of making it easy to choose which library you would like to open.
    Some more questions for you;
    1. Are you logged in to your Mac with an administrator account?
    2. Is Aperture sitting at the top level of the Applications directory?
    3. Get info on your System and library drives, in sharing and permissions do you have read and write privileges?
    4. Where is your library located, is it outside the "Users" folder structure? Aperture defaults to placing it within the picture folder for a user, this folder will not be available with full privileges to all users.
    HTH
    Tony

  • Cannot repair Aperture Library, "which library do you want to use"

    When I open Aperture and hold down the option key I keep getting prompted for "which library do you want to use"
    and it lists my current library and two backup with a , .BAK extension on two different disks.
    So I cannot get to the repair options, I only get  "which library do you want to use".
    How can I get to the repair options?
    much appreciated.

    You need to press the key combination options-command to launch into the Library First Aid Tools:
    Hold down the options key ⌥ and the command key  ⌘ at the same time, while launching Aperture. And keep the keys held down firmly, until you are seeing the Library First Aid panel. Then select "Repair Library" from the panel.
    If you only hold  down the options key  ⌥, you will launch into the Library chooser panel to switch between libraries.
    What is the reason, that you need to repair the Aperture library?

  • I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

    Question
    I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Buying unlocked through Apple Canada, possible to choose which GSM-model you want?

    I am buying the iphone 5 unlocked through Apple Canada, and is it possible to choose which GSM-model you want?
    (There are two different ones, I want A1429 bands 1 3 and 5), this is the "euro" version

    Easy go to:
    http://store.apple.com/uk/browse/home/shop_ipad/family/ipad
    it says questions just ask
    and click on chat now

  • ITunes no longers asks "Do you want to keep the original file or move to trash?" - Can this be fixed?

    I'm not sure if this was a recent update in Mavericks, but when I used to delete items from iTunes it would ask something along the lines of:
    Do you want to keep the original file or move to trash?
    Now I no longer get this, instead iTunes asks:
    Are you sure you want to delete the selected song from your iTunes library?
    After which, if you choose the option "Delete Song", you get no option to keep the original file, it just straight up deletes if from my library and hard drive. Does anyone know if there is a way around this? For whatever reason, I want to be able to keep the original file on my Mac, without keeping it in my iTunes library.
    I've tried resetting dialogue warning, and this hasn't made a difference.
    Thanks!

    iTunes prefs > Advanced > Reset all dialog warnings. - https://discussions.apple.com/message/23987276
    Resetting iTunes Store warnings - http://support.apple.com/kb/HT1734

  • TS3697 I am receiving an error message(iTunes will no longer sync photos to the iPhone "Peter's iPhone". Do you want to keep or remove photos previously synced to your iPhone") I am trying to download pics from my computer to my iPhone. Any ideas? Peter

    When I went to download some pics (originally taken with my iphone 4S) from my computer back to my iPhone I got the following error message: "iTunes will no longer sync photos to the iPhone "Peter's iPhone". Do you want to keep or remove photos previosly synced to your iPhone?"
    Coincidentally, my wife just purchased an iPhone 4S and syncs to iTunes on the same computer.
    Any ideas?
    Peter

    The "best" way to handle it, if you want to keep everything separate, is to create separate user accounts on the computer. make sure you log into your account on the computer before you attempt to sync your phone and log out when you're done using the computer.
    Though it's possible to sync both of them to the same iTunes library, and even share an account for the iTunes store, you're inviting confusion and possible data loss (as you've discovered already). Best to just use separate user accounts on the computer. That also gives you the benefit of not polluting the other persons browser favorites, contacts, etc.

  • When closing a Word doc can you stop 'Do you want to keep this new document?'

    Hi,
    Everytime I close a Word document I keep getting the save document dialogue box appearing with the text 'Do you want to keep this new document [filename]?You can choose to save your changes, or delete this document immediately. You can’t undo this action.'.
    How can you stop this? I just want to be able to open a Word document, view it and close it without the hastle of being asked if I want to save it or delete it.
    Thanks for any help on this.
    P.

    Hi Pete,
    When you open a Word document in Pages, it is converted to Pages format. Pages is asking if you want to save as a Pages document (and replace the Word document). You can stop the Save dialogue box by:
    System Preferences > General > Uncheck Ask to keep changes when closing documents.
    However, I would be careful. This will apply to all documents that you open in Pages (or Numbers or other apps). You might have a Pages document where you do want a reminder to save. Small problem to say 'Don't Save' to a Word document that you open to view, but don't want to save. I find it is safer to turn on 'Ask to keep changes when closing documents'. That puts you in charge of your work.
    Another way to just view a document is to open the document in Preview or TextEdit (right click or control click, Open With).
    Regards,
    Ian.

  • I am trying to download Firefox - when I click on download, I get this message: This type of file can harm your computer. Do you want to keep Firefox Setup 8.0.exe anyway?

    I need help downloading firefox. I clicked on download, a message this message appeared at the bottom of my screen: "This type of file can harm your computer. Do you want to keep Firefox Setup 8.0.exe anyway?" Then I had the option to "keep" or "discard."

    Download from official site:
    http://www.mozilla.org/en-US/firefox/all.html
    select "keep", and after downloading double-click to install it.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

    Hello. I have windows xp. When using Firefox as my home page, I get awful screen interference of lines verticle and horizontal. When I switch to Internet Explorer I don't get them. I want to keep Firefox as server.

    Here is something that you can try:
    # Click on Tools and then click Options.
    # Select the Advanced panel
    # Select the General tab
    # Uncheck Use hardware acceleration where available.
    # Click File and then click Exit.
    # Start Firefox normally.
    Once you have followed those steps, you'll want to follow these as well and see if the lines are gone.
    Click the Help menu and select Restart with Add-ons Disabled.
    Let me know if this has eliminated the problem.

  • Outlook 2013 OOF "Forward" rules not working against Exchange 2007

    We have found that on Outlook 2013 clients (connecting to Exchange 2007) we cannot set forwarding rules in OOF (Out of Office / Facilities) if we select a recipient from the GAL. The error we get when trying to set the rule is:
    "Changes to the rule cannot be saved"
    However, if we manually type the SMTP address (without resolving it to the GAL) and click OK the rule is accepted.
    We have tested the rule using other versions of Outlook and it appears that Outlook 2013 is the only client that has this problem.
    Any suggestions would be welcome.
    Mark

    The issue is know under OffBug 57619. A support case for this had been started in April but no customer pursued a fix yet.
    Currently its status is low and no fix is intended. If this is a critical issue for you and to get it reconsidered, you'll need to open a support incident of your own, refer to OffBug 57619 and state your case as "high customer impact" (in case your not
    a Premier customer) and request a Hotfix.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • With iOS 7 can you chose which restore point you want to restore?

    I accidently deleted some stuff off my iphone about a week to two weeks ago and I can't figure out how to get it back. I know with the iOS 6 you could choose where to restore from. Is there anyway I can do that with the iOS 7?

    I had to reset my iPhone 4S when I got iOS 7 and it allowed me to choose the last back up from iCloud and it also did it when I got my new iPhone 5s!
    Hope this helps!

  • HT4009 I have the smurfs village and I came up with a notice say which one do you want. Do you want the online or the saved one and I picked the saved one. When I go in and it loads it kicks me out. I need your help.

    I can't get in my smurfs village and I pad about $50 on it can you help me

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • Edit, blur, move, crop, light, or create -- which one do you want help with?

    To get a feel for the kind of learning we should prepare for Photoshop CS6, we're running another poll. Would you take a second and cast your vote? 
    http://forums.adobe.com/polls/1107 Thanks!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • [Survey] Which features do you want for EJB 3.0 modeling ?

    JDeveloper is currently looking/considering at modeling capabilities to support EJB 3.0 session beans and JPA entities. The modeler might let you view and/or edit the EJB components and their related artifacts, like database objects, related classes, and so on. What features of an EJB 3.0 / JPA modeler would you find most useful?
    This is your chance to influence this feature set.
    Let us know what are the top features (in this category) that you would like to see by posting them on this thread.
    Thanks,
    The JDeveloper Team.

    OK... here's the latest on my lab environment/server set up. We have a 17" iMac G5. It is connected to a 24 port 10/100 switch with two gigabit ports. The iMac gets a gigabit port; the eleven eMacs get 10/100 ports. There is an internal 160 GB SATA hard drive installed in the iMac, and a 160 GB external firewire drive connected to the iMac for back-up purposes. I haven't got the back-up software running yet, but plans are to back up user information on the external hard drive and create an archive of server OS set up and software on DVD in case of catastrophic failure.
    Since our 30+ Windows boxes are served with your basic Dell Optiplex running Windows Server 2003 and an old, cranky Gateway running Linux, I didn't think our little Mac lab would suffer that much under an iMac server. So far it's been smooth sailing, and the whole set-up, iMac, server software, and external hard drive, were under $2000.

Maybe you are looking for