Unable To Open File.......... The system cannot find the file specified

hi all.
First time poster.
i have a windows VM running on my macbook...
have had no troubles for the last 2 months using hourly...
have just restarted the mac, and have come up with the unable to open file error...
i'm confused (extremely new to mac)
is there anything i need / can do to fix? (had a heap of stuff i needed on the windows VM)
thanks

Welcome to the Community,
I can't tell you what was causing this, but according to the support bundle you provided, three of the required .vmdk files are missing (Virtual Disk-s001.vmdk, Virtual Disk-s002.vmdk, and Virtual Disk-s003.vmdk). These files however still existed when you used the VM at "2015-05-23T12:29:04.017+10:00" (see vmware.log).
Since the VM is running on a snapshot and the base .vmdk files have a time stamp of April, 14th, you should be able to recover these three files from a recent backup (assuming you are regularly backing up your system). You may also want to check whether there's a lost+found folder on your system which contains the files!?
André

Similar Messages

Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

Golden gate - Unable to open file (error 2, The system cannot find the file specified.)

Hi Everyone.
I have configured GoldenGate on Win2008 R2, but when I start replicat, this fall.
Initially:
GGSCI (WIN-NKC50KUIT0G) 19> start replicat rep1
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (WIN-NKC50KUIT0G) 20> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    STOPPED     REP1        00:00:00      00:37:53
GGSCI (WIN-NKC50KUIT0G) 21> info replicat rep1
REPLICAT   REP1      Initialized   2013-11-02 22:23   Status STOPPED
Checkpoint Lag       00:00:00 (updated 00:40:28 ago)
Log Read Checkpoint File C:\app\Oracle\product\gg\dirdat\tr000000
                     2013-11-02 22:23:55.000000
With VIEW GGSEVT:
2013-11-02 23:15:31 INFO    OGG-01815 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Virtual Memory Facilities for: COM
    anon alloc: MapViewOfFile anon free: UnmapViewOfFile
    file alloc: MapViewOfFile file free: UnmapViewOfFile
    target directories:
    C:\app\Oracle\product\gg\dirtmp.
2013-11-02 23:15:31 ERROR   OGG-00446 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: Extract file not found or no records beyond begin time.   why???
2013-11-02 23:15:31 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, R
EP1.prm: PROCESS ABENDING.
After I tried with:
GGSCI (WIN-NKC50KUIT0G) 8>Alter rep1, EXTSEQNO 0
but
GGSCI (WIN-NKC50KUIT0G) 9> info all
Program     Status      Group       Lag at Chkpt Time Since Chkpt
MANAGER     RUNNING
REPLICAT    ABENDED     REP1        00:00:00      01:11:50
why??? abended??
In logs:
2013-11-03 14:07:02 INFO    OGG-00996 Oracle GoldenGate Delivery for Oracle, REP1.prm: REPLICAT REP1 started.
2013-11-03 14:07:02 ERROR   OGG-01091 Oracle GoldenGate Delivery for Oracle, REP1.prm: Unable to open file ".\dirdat\tr000000" (error 2, The system cannot find the file specified.). why???
2013-11-03 14:07:02 ERROR   OGG-01668 Oracle GoldenGate Delivery for Oracle, REP1.prm: PROCESS ABENDING.
GGSCI (WIN-NKC50KUIT0G) 12> info rep1, detail
REPLICAT   REP1      Last Started 2013-11-03 14:30   Status ABENDED
Checkpoint Lag       00:00:00 (updated 01:19:03 ago)
Log Read Checkpoint File .\dirdat\tr000000
                     First Record
Extract Source                          Begin             End
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   First Record
.\dirdat\tr000000                       * Initialized *   2013-11-03 12:54
Current directory    C:\app\Oracle\product\gg
Report file          C:\app\Oracle\product\gg\dirrpt\REP1.rpt
Parameter file       C:\app\Oracle\product\gg\dirprm\REP1.prm
Checkpoint file      C:\app\Oracle\product\gg\dirchk\REP1.cpr
Checkpoint table     target.checkpoint
Process file         C:\app\Oracle\product\gg\dirpcs\REP1.pcr
Error log            C:\app\Oracle\product\gg\ggserr.log
GGSCI (WIN-NKC50KUIT0G) 13> view param rep1
REPLICAT rep1
ASSUMETARGETDEFS
USERID target, PASSWORD oracle
discardfile .\discard\rep1_discard.txt, append, megabytes 10
DDL
map source.*, target target.*;
I don´t understand it, How I could solve?? Please help me!
Thank you.

What steps did you use to add the Replicat? Can you list those commands out.
Also, does this file actually exist on the server where Replicat is running: C:\app\Oracle\product\gg\dirdat\tr000000

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

Following error i am getting after i chnaged the Path in Config File from
\\vs01\d$\\Deployment\Files\temp.txt
to
C:\Deployment\Files\temp.txt
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).".

I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
Also from BOL (see section Usage Considerations - last bullet point)
http://msdn.microsoft.com/en-us/library/ms141239.aspx
* Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
Make sure you take care of this as well.
HTH
~Mukti
Mukti

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

When I open a pdf link I am getting an error "The system cannot find the file specified. " The same link is opened in other browsers.

I used to open the link" http://supportdocs.sonybiz.net/indexes/pi%5CLFS%5CMay_2004%5C00035186.pdf" in firefox earlier. Now I use version 5.0. Recently I noticed that such links in pdf are not opening with firefox and getting an error that "The system cannot find the file specified. " But the same is opened in other browsers. I do not know whether it is a settings problem or limitation of firefox.
It is very much helpful if someone can help me in resolving this issue.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: :      ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------

from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred

Error message when starting: McShield.dll: the system cannot find the file specified - what do I do to solve this?

When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red Baron

Hello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George

The system cannot find the file specified error in ftp upload

Hi,
i am using filezilla ftp server and apache common ftp client and while uploading a file i am getting below error:
code to call ftp client
String local_file ="D:\\home2.JPEG";
String remote_file ="\\abc";
ApacheFTPClient apacheFTP = new ApacheFTPClient();
String[] abc ={"-s", "127.0.0.1", "Manender", "Manender", remote_file, local_file};
apacheFTP.main(abc);
error log:
220-FileZilla Server version 0.9.31 beta
220-written by Tim Kosse ([email protected])
220 Please visit http://sourceforge.net/projects/filezilla/
Connected to 127.0.0.1.
USER Manender
331 Password required for manender
PASS Manender
230 Logged on
SYST
215 UNIX emulated by FileZilla
Remote system is UNIX emulated by FileZilla
java.io.FileNotFoundException: D:\home2.JPEG (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at com.po.ApacheFTPClient.main(ApacheFTPClient.java:152)
     at com.po.sample.main(sample.java:120)
i have file in my d directory with same name.
please help me in this.
thanks in advace..

i have file in my d directory with same name.Doesn't look like that? Are you sure that it isn't named e.g. home2.jpg?

"The system cannot find the file specified" - New to MVSE 2013

Hey all,
I have downloaded Visual Studio Express 2013 for Windows Desktop and am currently working my through the introduction sessions on: http://www.cplusplus.com/doc/tutorial/program_structure/
I did not get far before i encountered this error whilst trying to run my segment of code. I am completely new to all this so please bear with me :)
The error window said:
"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
The system cannot find the file specified.
Would love some simplified help please if this is indeed the right area of the forum to post this in.
Many thanks!

Hi Jono112,
>>"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
Based on your issue, to check if the issue is related to the VS IDE or your specified C++ project, I suggest you can refer the following MSDN document to check if you get same issue.
https://msdn.microsoft.com/en-us/library/ms235629.aspx
(1)you get same error in the new c++ console application, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get the issue in the new c++ console, so I suggest you try to clean and build your c++ console application, then debug it again.
Or you can upload your C++ console application to OneDrive and then copy link here, we will reproduce your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MDT2012 - Deployment failed, the system cannot find the file specified

Hi everybody.
First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help.
I encounter issues with my MDT 2012 Update 1 platform.
I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts.
In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:.
The script is the following :
"%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error :
Litetouch deployment dailed, return code = -214767259 0x80004005
Failed to run the action: InstallD (ie : the script above)
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The error is on my task which uses imagex to deploy my D and E WIM.
So I looked to see if the file's path was the good one.
And it is !!!
Wizard says that the file couldn't be find, but the file is existing, and in the good path.
For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast.
I even encounter this issue if I use my MDT server and my computers on the same switch.
Any help would be gratefull, my client gives me the week to resolve the issue.
Thanks

BDD.LOG
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[------ Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:" \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe" /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
file="LTIApply">
<![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
<![LOG[ Console > [ 99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe" /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Target volumes will be updated with BOOTMGR compatible bootcode.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Successfully updated NTFS filesystem bootcode.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Bootcode was successfully updated on all targeted volumes.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
file="ztiRunCommandHidden">
<![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[ Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
<![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">

Getting ComException (0x80004005):The system cannot find the file specified

Our customer is getting an error from her remote location via the internet, running a report that has not changed in a year. None of our other customers are having this problem. When we sign in from our office with her credentials, we do not get the error. We've had her reboot, clear cache, etc. She has tried from Firefox and IE ... same result.
She is running WindowsXP and signs into our website VB program on a 2008Server under IIS aspx.net and SQL Server. We are using Crystal Reports 2008 v12.2.0.290 full.
The error is:
[COMException (0x80004005): The system cannot find the file specified.
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +95
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +356
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +419
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +895
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +84
   nettax.newtax_cr_1.GenerateReport(String Reportname) in F:\the cloud nettax with codebehind\nettax\newtax_cr_1.aspx.vb:137
   nettax.newtax_cr_1.page_load(object sender, eventargs e) in F:\the cloud nettax with codebehind\nettax\newtax_cr_1.aspx.vb:1316
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Again, we have made no changes ... it has just stopped working for her, yet other remote users are creating the report just fine .... BUT, each has their own SQL database that the report is being created from. Any help??

I moved your post to the .NET - SAP Crystal Reports forum.
Only idea I have at this time is to get [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] on this. You'll have to download it on to the server. Filter for the worker process so you limit the log size. Then have the customer attempt to load the report. Once she gets the error, you can save the log. Look for any errors re. load of files (DLLs, rpt files, etc.) and also look for "Access Denied" errors on files as well as registries.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

ORA-20100 The system cannot find the file specified 0RA-06512

I can create and deploy a .NET stored procedure but when I run it either from Visual Studio 2005 Oracle Explorer or TOAD or SQLPlus I get the following:
ORA-20100: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_CLR", line 211
ORA-06512: at "PROD.GETSEGADDRNO", line 7
ORA-06512: at line 1
It is basically the same C# code as the OTN sample except for accessing a table in my database.
I found a forum thread dated 2006 with basically the same error message and it said the problem was fixed in Oracle Database patched to 10.2.0.2 but I can't find such a patch for 10g R2 Enterprise.
This is my first time setting up Server 2003, Oracle 10g and ODT for .NET
(I successfully created and deployed an external procedures for Oracle 8.1.7 on Windows 2000 a couple of years ago)
This is the code:
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;
// use the ODP.NET provider
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace CLRLibrary1
// Sample .NET stored function returning address number (ADDR_NO) for
// a given segment number (SEG_NO)
public class Class1
public static int GetSegAddrNo(int segno)
int addrno = 0;
// Check for context connection
OracleConnection conn = new OracleConnection();
if (OracleConnection.IsAvailable == true)
conn.ConnectionString = "context connection=true";
else
throw new InvalidOperationException("context connection" +
"not available");
conn.Open();
// Create and execute a command
OracleCommand cmd = conn.CreateCommand();
cmd.CommandText = "SELECT ADDR_NO FROM SEG WHERE SEG_NO = :1";
cmd.Parameters.Add(":1", OracleDbType.Int32, segno,
System.Data.ParameterDirection.Input);
OracleDataReader rdr = cmd.ExecuteReader();
if (rdr.Read())
addrno = rdr.GetInt32(0);
rdr.Close();
cmd.Dispose();
conn.Close();
return addrno;
} // GetSegAddrNo
} // Class1
} // CLRLibrary1
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
was installed from the Oracle downloads site: 10201_database_win32.zip
On Windows Server 2003 R2 Standard Edition SP2
Oracle .NET tools was installed using: ODTwithODAC1020221.exe
The CLR Service is running
Deployment says that it is successfull.
The DLL is in the expected Oraclehome\BIN\CLR folder
The deployment script is:
CREATE OR REPLACE LIBRARY "SYS"."ORATEST6_DLL" AS '$ORACLE_HOME\bin\clr\OraTest6.dll';
GRANT EXECUTE ON "SYS"."ORATEST6_DLL" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLR" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRTYPE" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRPARAMTABLE" TO PROD;
CREATE OR REPLACE FUNCTION PROD.GETSEGADDRNO wrapped
a000000
1f
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
8
147 138
ePHIr6kvu6nZ9gYrxgs40akg18owg1zQf/ZqZ3QC2vjqaIs25soMp1nBmBfBj1ZboVvNkdPT
8qhpuEVdmv4n2nlF5ynrhLsm3F0h9ZGrTQ4tGYIybWjMFxYNlDDeBOx1i7O0GviP8AxHys23
kW8aTVA2xV8IuLNlwP7KWFw70tGbg+lUIlRhYo5WmLW6N9wcjOCeLZK6W6s6tvd4zKAQykzc
sIsaneE0FWyV9Q1BD0yJpLoCfWH+f6fVXsne5Feyxu68k5geCJ8F5FCLm2ycvxIiKNKTIpiD
q4wshbsYLTTPHX3F6pA=
The parameter mapping is:
return value int32 number
segno int32 number
Bob Sorrell
[email protected]
863-662-5524

These are the Reference Properties for Oracle.DataAccess in the OraTest6 app:
Aliases: Global
Copy Local: False
Description: Oracle.DataAccess.dll
File Type: Assembly
Identity: Oracle.DataAccess
Path: c:\oracle\ora102\odp.net\bin\2.x\Oracle.DataAcess.dll
Resolved: True
Runtime Version: v2.0.50727
Specific Version: False
Strong Name: True
Version: 2.102.2.20
This is what GacUtil shows:
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Number of items = 2
The GAC seems to contain both 2.102.2.20 and 1.102.2.20
Do I need to remove one?

Unable To Open File.......... The system cannot find the file specified

Similar Messages

Maybe you are looking for