Outlook 2013 OOF "Forward" rules not working against Exchange 2007

We have found that on Outlook 2013 clients (connecting to Exchange 2007) we cannot set forwarding rules in OOF (Out of Office / Facilities) if we select a recipient from the GAL. The error we get when trying to set the rule is:
"Changes to the rule cannot be saved"
However, if we manually type the SMTP address (without resolving it to the GAL) and click OK the rule is accepted.
We have tested the rule using other versions of Outlook and it appears that Outlook 2013 is the only client that has this problem.
Any suggestions would be welcome.
Mark

The issue is know under OffBug 57619. A support case for this had been started in April but no customer pursued a fix yet.
Currently its status is low and no fix is intended. If this is a critical issue for you and to get it reconsidered, you'll need to open a support incident of your own, refer to OffBug 57619 and state your case as "high customer impact" (in case your not
a Premier customer) and request a Hotfix.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Similar Messages

  • Outlook 2013 Mail Option buttons not working

    Microsoft Office Outlook 2013 issue where in Outlook File>Options>Mail the "Spelling and Autocorrect", "Signatures", and "Stationary and Fonts" buttons will not respond. I have searched and searched but I cannot make these
    buttons work.
    Solutions I have tried with no results:
    Running Outlook in Safe Mode
    Disabling all Com-Addins
    Reinstalled Outlook
    Ran Office Repair
    Re-created Mail Profiles
    Disabled HIPS protection
    Changed Registry values in:
        HKCU>Software>Policies>Microsoft>Office>15.0>Common>MailSettings
        HKCU>Software>Microsoft>Office>15.0>Common>MailSettings
        HKLM>Software>Classes>Wow6432Node>CLSID>{0006F03A-0000-0000-C000-000000000046}\LocalServer32
            (Default) Key and LocalServer32 Key
    Tried to get to signature through MS Word
    I am unable to navigate to the location of the signature block and I am able to place signatures there through adding .rtf, .htm, and .txt file. I am able to add them into the email, but when I choose "signatures" no window opens to add/edit current
    signatures.
    Please Help! I cannot think of anything else to try!
    -Chris

    Hi Chris,
    Are these three buttons grayed out?
    What version of Windows and Outlook 2013 are you using? The registry value we need to modify is different according to the version of Windows and Outlook.
    32-bit version of Windows
           HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{0006F03A-0000-0000-C000-000000000046}\LocalServer32
    32-bit version of Office on a 64-bit version of Windows
           HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{0006F03A-0000-0000-C000-000000000046}\LocalServer32      
    64-bit version of Office
           HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{0006F03A-0000-0000-C000-000000000046}\LocalServer32
    Please make sure you have modified the correct registry value.
    In addition, please also make sure you have entered the correct path to Outlook.exe for the registry value. It's recommended to navigate to the path in Explorer first and then copy and paste the path to the data filed of the registry values.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Mail Forward Rule Not Working

    I have a few mail forwarding rules set which don't seem to be working. I see no forwarded emails in my send mailbox, and when I click the small arrow in the message window that indicates it has been forwarded, I get a message that says I must have deleted the message, which is not true. This is what the rule looks like:

    Mail rules only work on incoming mail. Once the mail is listed in your Inbox, the only way to use a rule is to manually run it. Given how rules work this may render your rule as non-working.

  • Notes are blank in Outlook 2013 after updating the note in IOS 8

    The setup:
    On my computer, Windows 7 and Outlook 2013 (Exchange 2013 on the server side).
    I create a new note and close it. I can open it, modify it, and everything works as expected.
    On my iPhone 6 with IOS 8.0.2, I go into the same note. Everything looks fine. If I modify it and close it, I can open it and everything looks fine.
    Now the issue...When I go back to Outlook on my PC and open the same note (subject/title shows in the list view), the note is completely blank.
    So, I go back to my phone and everything still looks ok. If I type in the now blank note on the PC, it overwrites the old note contents.
    To make all this even stranger, if I log into OWA, the note is there and works fine through this entire process (well, until I overwrite the contents). But, in OWA, it seems to strip out the subject on certain saves.
    I tried all this on another laptop I have lying around and get the same results. I tried a new profile. I tried safe mode. All the same.
    This leads me to believe that Outlook 2013 has issues displaying notes. If OWA has the correct info, then the server has the correct info.
    Does anyone else have this issue or can try to replicate the issue? Any suggestions on fixing it?
    (Original post
    here)

    See if you are hitting the issue mentioned in the article -> http://support2.microsoft.com/kb/2980834/en-us?sd=rss&spid=16662&wa=wsignin1.0
    If yes, the fix is with Exchange Server 2013 CU6.
    ============
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Outlook 2013 Free/Busy can not retrieve information

    Currently have a problem with Outlook 2013 Free/Busy can not retrieve information.
    All windows updates are installed. 
    Exchange 2007 is being used. 
    Problem started last week. 
    Already Tried without any progress:
    1) Recreated profile (Fixed the issue for 1 week)
    2) Cleanfreebusy ( No longer works for outlook 2013)
    3) /Cleanreminders 
    4) Removed latest updates for outlook 10/02( As requested by Microsoft support, however we found users without this update installed, suffering from the problem) 
    5) Repaired OST file 
    6) Repaired Office 2013 
    Can anyone help it would be much appreciated?

    Hi
    As per the information and details provided by you, Outlook 2013 free/busy cannot retrieve information, please follow these steps: -
    The user has never logged in
    Before any free/busy information is available, the user must have at least a calendar. A calendar will not be created until a user logs into their account.
    The option to publish at some location has been enabled in Calendar options
    In all Outlook versions, the option to publish free/busy information must be unchecked. By default, this option is already unchecked.
    This option is located under
    Tools > Options > Preferences > Calendar Options > Free/busy Options.
    Outlook is using cached browser information
    Outlook Free/busy user HTTP, and therefore borrows information cached by Internet Explorer. It is required to clear the offline cache. This is located under
    Tools > Internet Options > General. In the “Temporary Internet Files”  section, choose the
    “ Delete files” button.
    Internet Explorer settings is not correct
    AN Internet Explorer setting may prevent the .ics file from downloading via HTTPS. In Internet Exporer on the Outlook computer, go to
    Tools > Internet Options > Advanced. In the Security section, the checkbox for “Do not save encrypted pages to disk” should be unchecked.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

    csrAttachmentUploadDiv partattachment  is not rendered SP 2013(Attach file in not working for all the list forms)?
    Ravi
    function ShowPartAttachment() {
    ULSopi:
        if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
            alert(Strings.STS.L_FormMissingPart1_Text);
            return;
        (document.getElementById("part1")).style.display = "none";
        (document.getElementById("partAttachment")).style.display = "block"; //problem here

    Am also facing the similar problem....any iputs are highly appriciated.
    Issue..
    1) Defined the attachment type in IMG.
    2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
    3) Attached the excel file in the design.
    See the screen shot below:
    The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
    Please see the screen shot below:
    Did i miss any Configuration?? Please suggest...
    Regards,
    Naveen

  • My Macbook Pro (bought in 2013) function keys are not working

    My Macbook Pro (bought in 2013) function keys are not working. The function keys ie the volume and brightness are not working at all both with one single tap and with the function button. I have checked the settings for the keyboard but nothing seems to stand out that is making the keys not work?
    Please can you help?
    Thanks
    Kat

    Some might suggest resetting the SMC, but I don't really think that will solve the problem. You can try, though.
    I would suggest, since you're still under warranty, taking your machine to your local Apple Store/AASP and letting them fix the problem. It could be any sort of hardware problem. Only the Apple techs have the tools to properly diagnose and repair the machine.
    Clinton

  • Infopath form load rule not working in browser forms but works on Client

    Hi
    I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
    It works when I open it on client, but on the browser it fails.
    Have anyone encountered such an issue.

    Check below:
    http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
    Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
    Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
    http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
    if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
    This look like a bug. Here are the steps below that will lead you to the bug:
    Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
    Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
    Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
    Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
    Open and Save category, click the Rules button and add a new rule in it and save it.
    Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
    Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
    If this helped you resolve your issue, please mark it Answered

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • Call Forwarding Number Not Working

    Hi I have just purchased a skype phone number in Australia  for 3 months and have redirected my calls to a number in the Philippines whilst I am on holidays. When I ring this number (Australia Skype number)  it isnt being diverted to my Philippine phone number. I have added the number and whenever I return to tab the details for Call Forwarding are being erased. Advice appreciated as I am not receiving calls on mobile.

    I am also facing this same problem of Call forwarding no. not working , I am having a Hong Kong Phone skype no. and have diverted to my India no. however when some body calls me on my HK no. the no. is not connected. I am covered with all the subscriptions required for call transfer , Please suggest urgently as i am loosing on reciving calls from all my impotant no.
    hellp reply asap .

  • Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

    Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
    Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
    All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
    Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
    We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
    i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
    Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
    exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
    there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
    i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite)  as exchange and was able to send a mail from there (even if quite delayed).
    but there are not coming in any mails.
    same exchange accounts triggered by imap do work and also via owa.
    Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
    is giving error "end of file reached" but messages are send after some time.
    Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
    Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
    could it be there is something in regarding webdav which is very slow and leading to timeouts ?
    in application log i do have the following two information events every few minute:
    The Exchange Web Services started successfully. Event ID 1
    and
    Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics: 
     (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version) 
    In-site:
    SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
     Out-of-site:
    Errors in Application log:
    The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section 
    The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
    An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
    Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13" 
    Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
    Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
    Backup Exec:
    FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
    Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered.  This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider.  The
    error returned from CoCreateInstance 
    Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event. 

    Hi,
    Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
    More information for your reference:
    Please try to verify whether there is any expired certificate from the computer personal store.
    If it is the case, please remove them.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Mavis Huang
    TechNet Community Support

  • ICal still does not sync with exchange 2007 in Lion

    Dear,
    In Snow Leopard, iCal was not syncing with Exchange 2007. I read a lot of things on this and it all led to recurring events. Indeed, after deleting them, things started to work. But I cannot delete recurring events! I need them!
    Seeing that there was soo much talk on this all over on apple, I assumed that Apple would fix it. Instead, all we're seeing is some enhanced UI.
    Can somebody at Apple please make sure that this thing finally gets fixed? Really, how hard can it be, knowing that the hardware based i devices can sync without any trouble?
    Just for extra information, so you know what direction to look for:
    I have Windows SBS 2008 in Dutch language. Timezone is Brussels. Exchange 2007 and all updates.
    The system is running a self signed certificate
    Outlook works fine on the Mac. I don't want to use Outlook on the Mac but am forced to at the moment.
    Mail/Addressbook sync fine. Only Outlook doesn't!
    I did try deleting recurrent events and this worked for a day. Basically stopped working I think when I added again those recurring events.
    There are some errors in the console:
    21/07/11 11:42:36,563 iCal: Couldn't find an NSTimeZone to match the SerializableTimeZone
    21/07/11 11:42:36,563 iCal: WARNING: Failed to find TimeZone Identifier for Windows MeetingTimeZone: (GMT+01:00) Amsterdam, Berlijn, Bern, Rome, Stockholm, Wenen
    21/07/11 11:42:36,580 iCal:  error = Error Domain=CalExchangeErrorDomain Code=-11 "iCal kan de activiteiten in de agenda 'Agenda' niet bijwerken." UserInfo=0x7fbe94adb8b0 {CalFailedOperationKey=<CalExchangeSyncFolderItemsOperation: 0x7fbe94102d40>, NSLocalizedDescription=iCal kan de activiteiten in de agenda 'Agenda' niet bijwerken., NSLocalizedFailureReason=De account 'Exchange' kan momenteel niet worden bijgewerkt.}
    Please fix this,
    Guido
    Message was edited by: guido4096. Added error message

    Hi all,
    I do have exactly the same problem.
    But I am adding a new flavor, but I can not understand it.
    I've setup two Exchange calender connections. Both servers are inhouse. The setup of the Exchange servers are most likely the same.
    But one works and one not! How could this be explained?
    I like to express my deep disappointment about iCal and partly Apple Mail. It is unbelievable for me, that years after Apple's cooperation with Microsoft there are still such problems.
    I like my Macbooks and I certainly have the absolutely full bandwidth of all Apple products in my household and companies. But I think I have to go back to Microsoft and Sony Laptops in the near future.
    Although this kind of bugs are small one's, but the hurt constantly. Apple - please fix that.
    Here just for the interested reader is my console error message:
    3/15/12 11:51:29.819 AM iCal:  error = Error Domain=CalExchangeErrorDomain Code=-11 "iCal can’t refresh events in the calendar “Kalender”." UserInfo=0x7f856d4bddb0 {CalFailedOperationKey=<CalExchangeSyncFolderItemsOperation: 0x7f856c5ca060>, NSLocalizedDescription=iCal can’t refresh events in the calendar “Kalender”., NSLocalizedFailureReason=The account "DR InfoDyn" currently can’t be refreshed.}

  • Behaviour of Microsoft Transporter Suite (Notes migration to Exchange 2007)

    Dear Sir, 
         I have a question about configuraiton of Microsoft transporter, not sure whether it is a behaviour or it can be fixed.
    Question 1:
    Lotus Notes 7.04 --> Exchange 2007
    Microsft Transport: Scheduler set to every 15 min.
    Q1. Does it mean that Notes sync to AD User account setting only in every 15 min only ?
    Q2. It seems that it will not sync Notes email mailbox message with Exchange mailbox until manual press
        'Migrate selected mailbox', may I confirm that is it a design behaviour.
    Q3. After created free/busy connector (Every 60 minutes of sync), it seems that it will not sync
          user calendar until manual pressed 'Synchronize Now'.
    Q4. Can Mirocosft transport suit support workstation NSF file to PST file ?
    Q5. In notes environment, ACL will be used to configure boss/secretary condition which allow send as permission.
        Does it mean that all permission will be reconfigured manually? Or any Microsoft tools to work on it.
    Regards,
    Joe

    Hello Joe,
    I checked with a specialist regarding your questions and here are the responses.
    I hope this helps!
    Q1. Does it mean that Notes sync to AD User account setting only in every 15 min only ?
    If this is referring to Direcctory Synchoronization, then yes, it will synch any updates every 15 minutes. However, there is no reason to do a dirsync that often.
    Q2. It seems that it will not sync Notes email mailbox message with Exchange mailbox until manual press
        'Migrate selected mailbox', may I confirm that is it a design behaviour.
    This one seems to refer to migration. If you are wanting to migrate the mailboxes and email, you would have to manually migrate each user. In other words, this is not an automated process. So yes, this is by design
    Q3. After created free/busy connector (Every 60 minutes of sync), it seems that it will not sync
     user calendar until manual pressed 'Synchronize Now'.
    A dirsync will have to be run after the Free/Busy Connector is created. However, it should only have to be run once. After that, when a user requests new calendar information, it will pull information for that user
    Q4. Can Mirocosft transport suite support workstation NSF file to PST file ?
    Yes, you will have to use the EMS to do this. It's not possible via the GUI.
    Q5. In notes environment, ACL will be used to configure boss/secretary condition which allow send as permission.
        Does it mean that all permission will be reconfigured manually? Or any Microsoft tools to work on it.
    There is not an automated way of doing this.
    Kevin Ca - MSFT

  • Redirect emails in OWA and Outlook 2010 not working in Exchange 2013

    I have an new install of Exchange 2013 with all updates.
    When I setup an inbox rule to redirect messages to another contact it is not working.
    When I used Outlook 2010 and ran the rule manually I received this error:
    "the redirect action is not currently supported with run rules now"
    It seems that I didn't setup up something correctly in Exchange 2013 or a feature is not turned on. Please assist.
    In the EM console when I setup forwarding that is working. Its the inbox rule redirect not working.

    Hi,
    From your description, I recommend you use the following cmdlet to ensure that the DeliverToMailboxAndForward parameter is set to $True.
    Get-Mailbox <identity> | fl DeliverToMailboxandForward
    If this parameter is false, you can use the Set-Mailbox cmdlet to set it and check the result.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • Forwarding document (not work item) from specific SAP workflow to Outlook

    Hi,
    We are looking for ways to forward the email notification of leave approval from SAP inbox to MS Outlook.
    One way I know of is to create Auto forwarding in SAP inbox, however this would forward all documents received regardless of the work flow.
    Would appreciate it if any one out there could share your experience.
    Thanks.
    Siew May

    Use program RSWUWFML2.  You can get pretty fancy with it to setup wrapper text.  I have used it a lot so feel free to ping me with any questions.
    What is important to know is normal 'email' forwarding will not send workflow items.  I use this every 15 minutes to forward to Outlook and get the users into the Portal to manage the workflow.

Maybe you are looking for