Outlook 2013's Out of Office auto replies gives an error.

Outlook 2013 says the Exchange server is unavailable when you click on the Out of Office button. It connects to an Exchange 2013 server with autodiscover set up. It doesn't change when I increased the size of the ruleset cache nor does it change
when I add a SRV record "acbrownit.wordpress.com/2012/12/20/internal-dns-and-exchange-autodiscover/". The internal and external virtual directory addresses are also correct. OWA works but I needed to be able to do this with Outlook.
Any help would be greatly appreciated.

Hi ,
As per my knowledge this is purely related to autodiscover issue .
1.Please have your outlook anywhere internal name and autodiscover name in internet explorer proxy exceptions .
2.Same time please check whether you have properly configured the web services and autodiscover url in all the cas servers .Because web services are responsible for availability services like OAB,OOF and free busy informations .
3.Then do the test email configuration and check the outlook is receiving the correct url for web services and also ensure the outlook is properly patched.
4.If you wanted have out of office to get work for external users you should have an autodiscover record in external dns and also the autodiscover queries should have to be routed to the proper cas server or LB
In addition to that web services virtual directory should have to accessible for external outlook users in internet .
Most importantly you should have to check whether you have disable out of office replies for remote domains or not .
Have look in to the below mentioned blog which will give you more clarity about OOF:
http://blogs.technet.com/b/exchange/archive/2011/09/08/configure-automatic-replies-for-a-user-in-exchange-2010.aspx
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

Outlook 2013 - BCC field won't auto populate with frequent email recipient.

Outlook 2013 - BCC field won't auto populate with frequent email recipient. In the TO or CC, if they enter the first initial of a recipient, it auto-suggests recipients. This does not happen in the BCC field. Is there an option to turn that on?

Hi,
Does this issue happen to a certain client or many of them?
There is no separate option to enable/disable auto-complete for Bcc field.
Since auto-complete works in the To and Cc fields, it means the auto-complete is not corrupt. We may try turn off the Auto-Complete and turn on it again to see the result. To do this, go to
File > Options > Mail, scroll down to the
Send messages section, clear the check box before "Use Auto-Complete List to suggest names when typing in the To, Cc, Bcc lines". Click
OK. Check the box again, click OK and see the result.
We may also test it in Outlook safe mode. To do this, press Windows key + R to open the Run command, type
outlook.exe /safe and press Enter.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT1349 How do I set-up an out-of-office auto reply if I'm still using mobileme?

How do I set-up an out-of-office auto reply if I'm still using mobileme?

Couple of links,
Out of Office Auto-reply
How to Set Up an Autoresponder in Mac OS X Mail

How do I import my Outlook 2013 PST file into Office 365 and then have them permanently synced?

I have Office 365. I have Outlook 2013 downloaded on my computer with all my emails and contacts, etc.
I want to import the entire PST file with my emails, contacts etc. into Office 365 / Exchange Online (cloud?). Once that is done, I want to set it up so that my Desktop Outlook will always update and sync with my Office 365 when I am out of the office and
use the Outlook mail App.
PLEASE HELP!

Hi,
You can also use Outlook or Outlook Web App to import your existing PST file into your Office 365 account.
First configure your Office 365 account into Outlook, then use Import/Export
feature in Outlook client to import your PST file:
http://office.microsoft.com/en-us/office365-suite-help/migrate-email-and-contacts-into-a-new-office-365-for-business-account-HA103169067.aspx
http://office.microsoft.com/en-us/office-online-help/use-outlook-to-move-information-between-email-accounts-HA104218074.aspx?CTT=5&origin=HA103169067
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Can't move "completed" items into folders using Outlook 2013 on a Microsoft Office 365 Home Premium Account using a work Exchange 2010 address

I've been in touch with several Microsoft support teams about this issue, and the latest move was to shove me off onto Pro support, but since I'm using a personal Office account, I'm hoping that through the community I can find a way to resolve this issue without
escalating through our IT department. I do not think this is an Exchange issues because I have previously used this product and method without resulting in this error on a Windows 7 32-bit AMD computer and a Windows 8 and 8.1 Professional 64-bit Intel computer.
Here's my current specs:
Windows 7 Professional 64-bit, service pack 1
AMD A6-5400 3.6 GHz
8GB RAM
Microsoft Office 365 Home Premium
Office updates automatically, version 15.0.4551.1512
About Outlook shows "Microsoft Outlook 2013 (15.0.4551.1511) MSA (15.0.4551.1508) 32-bit/Part of Microsoft Office 365 Home Premium"
Here's how to reproduce the issue:
1) Open View Settings
2) Select "Other Settings..."
3) Disable "Use compact layout in widths smaller than XX characters" and enable "Always use single-line layout"
4) Select "Columns..."
5) Under "All Mail fields" add "In folder"
6) Select any email
7) Context-menu -> Find Related -> Emails in this Conversation
8) Select "more"
9) Sort by folder
10) Select all messages from Inbox.
11) Use Outlook's preset "Done" function and select a destination folder
12) Watch Outlook fail to run "Done" and reset your UI without producing an error.
The first attempt to resolve this issue was to set up a new Outlook profile. This seemed to exacerbate the problem and resulted in Outlook providing an "Unknown error" before resetting the UI.
The second attempt to resolve this issue was to run "outlook.exe /resetnavpane". However, the nav pane does not appear immediately relevant to this issue.
The following similar steps also result in a crash, this time with an error:
11) Flag all select message as Complete.
12) Move all messages from Inbox to a destination folder.
This change in procedure results in the error "Cannot move the items. Some items cannot be moved. They were either already moved or deleted, or access was denied."
Help me, Microsoft Community. You're my only hope.

Import the calendar and contacts in Outlook.com. For contacts, export from Outlook as csv and import into Outlook by choosing the Other option (https://people.live.com/import/other?biciid=ImportCatalog)
You'll need to save the calendar as an ics file to import it. Select the calendar folder, the File, Save as an save as an ics.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Outlook 2013 can't preview Office files

I run Office 2013 Home and Business. I've just realized that Outlook 2013 refuses to preview Word, Excel and Powerpoint files saying "This file cannot be previewed because of an error with the following previewer"... and so on. After downloading
the file I won't open either.
I finally came across solution allowing to open such downloaded files by modifying (=disabling) all Protected View components in Office apps, which in fact seems ridiculous for me as I used to run Office 2010 and the earlier solution (a bar with warning about
opening a file from Internet) was just fine to live with. What's the purpose of this feature if one has to disable it to have Office apps working?!
Anyway, I'm able to open those files now.
However, modifying the Protected View options in other Office apps hasn't made Outlook preview working - how can I turn it back again?

Does anyone know where these reg entries for file extensions can be found?
Close outlook, start regedit
Navigate to here HKLM\software\microsoft\windows\current version\preview handlers
Making sure to back up the contents of course
Delete the key for Microsoft Word previewer, etc.
Restart outlook, preview a word doc you should now get a message “you should only preview files from a trustworthy source”

I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365

On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook,
any other option on exchange admin center for the same,
I want to know how to setup Outlook 2013 and 2010 to receive PASSWORD EXPIRY NOTIFICATION without log in domain,

Hi
As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
I suggest you run Office 365 desktop apps reffering to the steps below: -
Step1: - Login to Office 365 Portals.
Step 2: - In the right pane, click
Downloads under Resources.
Step 3: - Click Set up under
Set up and configure your Office desktop apps.
Moreover, please confirm the password policy by the
PowerShell cmdlet.
Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
Step 2: - Run Connect-Msolservice command.
Step 3: - Get a password policy by the following PowerShell cmdlet:
Get-MsolPasswordPolicy –DomainName yourdomain.com
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Out of Office Auto Reply

Does this exist server side ?
If so Where ?

I found you can access it by pointing your browser to the server (be sure to have web services enabled).
1) Click on Email Rules
2) Login as the user you wish to setup out of office reply
3) Select "Vacation Notice" on the left side of the window.
4) Make changes and hit save.
I have not tested it yet, but I found this by poking around.

Outlook 2013 set as default mail client but still shows error box saying it isn't?

We have recently installed Office 2013 64-bit on 4 servers. We previously used Outlook 2007 64-bit.
We set Outlook 2013 as the default mail client and do not have another mail client installed on the servers. However when you first login you get an error message box that says you have no default mail client 'either there is no default mail client or the
current mail client cannot fulfill the messaging request'.
I have checked all defaults to be for Outlook 2013.
How can I solve this issue? I am an administrator.

Try different Method to set Outlook 2013 as the default mail client to check the result. Thanks.
Method 1:Set as default within outlook.
-File > Options > General Tab > select the "Make Outlook the default program for E-mail, Contacts, and Calendar"
check box.
Method 2: Set as default from the internet explorer.
-Tool > Internet Options > Programs Tab > Set programs
Method 3: Set as default from control panel.
1.Navigate to Control Panel\Default Programs\Set Default Programs
2.Click on the outlook icon on the left hand side.
3.Set as default.
We may also try to create anther windows user profile in the same machine to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

OUTLOOK 2013 on Exchange in Office 365 LOCAL FAILURES

Unable to SAVE & CLOSE New Contacts. These land in LOCAL FAILURES. Can NOT update existing contacts. Outlook send/receive is functional for email.
Performed REPAIR of connection to EXCHANGE SERVER in ACCOUNT SETTINGS. No failure noted there.
Any ideas?

Hi,
Please disable Exchange cached mode in Outlook and use Online mode to check whether you can Save&Close New Contacts properly.
If the issue persists in Outlook Online mode, please start Outlook in safe mode to create a new contact to have a try. To start Outlook in safe mode, please type Outlook /safe in the Search box of the Start Menu.
Regards,
Winnie Liang
TechNet Community Support

Out of office auto reply not working...

Can't switch off …Any idea's ?

Let me clarify,
We switched on for a user but it will not switch off.
Where is the Pref file kept ?
maybe we can manually change it...
Thanks...
Message was edited by: Free Tibet

HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your time

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Rikaichan (add-on) doesn't work at my office. It gives this error "Javascript application: the index for one or more dictionaries needs to be created. This may take a while on slower computers". And then the PC freezes. What should I do?

I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
'''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?

venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

Print out all contacts with all info showing in Outlook 2013

In Outlook 2013, if you click the Contacts group you want to print, then go to File...Print, the only option is to essentially print the view you have when clicking into the People menu.
How can I print out every contact showing all the info in each contact?

Hi,
Do you want to print each contact into each printout page with all the info? If so, you can try printing using the
Memo Style. To do this, click the contact group you want to print, select one contact and then press Ctrl + A to select all contacts in the contact group. Then, click File > Print. Under
Settings in the Print tab, select Memo Style. Click
Print.
For more information about print contacts in Outlook 2013, please refer:
http://office.microsoft.com/en-us/outlook-help/print-your-contacts-HA102749446.aspx
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Office 365 hosted Exchange Outlook 2013 "The resource you are trying to use is located on an unsupported version of Microsoft Exchange"

I have Outlook 2013 downloaded from my Office 365 account and am getting the error "The resource you are trying to use is located on an unsupported version of Microsoft Exchange". I have added all the steps I have followed so far below.
We changed over to the Office 365 hosted Exchange from 2003 Small Business Server yesterday. I have backed up my Outlook 2010 then uninstalled all Office applications and rebooted.  Then downloaded the Office 2013 suite from my account
and installed it.  Ran the desktop setup to "Set up your desktop applications to work with Office 365."  Went to the control panel and launched the mail tool, made the
profile and named it Outlook and it auto filled with the correct info.  Clicked Next and it all checked as good, but when I launch Outlook I get the error "The resource you are trying to use is located on an unsupported version of Microsoft
Exchange". I have rebooted the laptop and recreated the account three times with the same results.
Any suggestions?

OK. So we solved the problem. At least in my case.
We deleted the profile again then jumped on a neighbors wifi and then ran the desktop setup from Office 365 again. Then we launched the mail setup tool, created a new profile and entered the information for the account. After this took we launched
Outlook and everything is working fine.
One thing to point out is that prior to the time that it worked, when I would create the profile and open it to set it up, it would auto fill the two available fields Name and Email Address. On the last run it didn't auto fill and I had four fields
to fill out. Name, Email Address and Password (x2).
Hope this helps someone.

Outlook 2013's Out of Office auto replies gives an error.

Similar Messages

Maybe you are looking for