Outlook Does Not Showup In "Select Device Application"

My Outlook on my home PC sync'd just fine with my 8350. After loading Desktop Manager 5.0 at work I am going through the configuration process to sync my 8350 to Outlook. After clicking on Address Book, the screen ask me to "Select Device Application". Only ASCII and Yahoo! show up as the choices to select. How do I get my Outlook to showup in the "Select Device Application" as an option to click on?

Hello Speedwold and welcome to the forums,
Usually this will mean that you have an unsupported version of Outlook installed or possibly the Outlook translators for BlackBerry Desktop Manager aren't installed/registered. Here is a link to an article that outlines some possible solutions to this issue. What version of Outlook are you currently using at work? This version can be found under Help > About Microsoft Office Outlook.
hope that helps!
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

Problem with the cmd-tab keyboard shortcut now cured with the latest software update, so the original problem must have been a software glitch.

Outlook does not appear as an option when setting up synchronization

I need help. I recently bought the BB Curve 8330. When I attempt to set up the sync configuations between Outlook and the BB, Outlook does not appear as a choice. What do I need to do to get Outlook to appear? I called Verizon customer service and they were not much help. Please help.
I am running MS Vista 2007.
Solved!
Go to Solution.

HI,
On your Blackberry go to OPTIONS/ABOUT the OS version looks like 4.x.x.xxx.
On your outlook are you running any connectors (business, hotmail etc) ?
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
Vista commands
1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> CD program files\research in motion\blackberry\is71 connectors\ms outlook connector
3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
4. If the registration is successful, the following message displays:
DllRegisterSErver in msoutlookconnector.fil succeeded.
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin.
Let me know about the device and the version of desktop software.
Message Edited by Bifocals on 10-30-2008 11:41 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

LC ES4 form in Adobe Reader DC: "MS Office Outlook does not recognize ","...*

I have a form created in Adobe Live Cycle Designer ES4 with extended rights leveraged in Acrobat Pro 11. The form uses an array to store a number of e-mail addresses. When a user selects a name in another field the e-mail address is ‘subtracted’ from the array and the e-mail is created so that it is sent ‘To’ that individual and cc’d to the remainder of the e-mail addresses in the array. The array format is var ListAddr = new Array("[email protected]", "[email protected]", [email protected])
The whole thing works very well so long as Adobe Reader 11 is used: e-mail addresses appear in Outlook with a semi-colon between the addresses. The e-mail clients used by those completing the form are either Outlook 2007 or Outlook 2010.
Eventually users will migrate to Adobe Reader DC so I have been testing the form in Reader DC in advance and am met with the message:
“Microsoft Office Outlook does not recognize “,”…”
A Google search revealed that this issue can be rectified by going to Outlook Tools -> Options -> Preferences -> E-mail options -> Advanced e-mail options and checking the box for “Allow comma as address separator”. Unfortunately doing this makes no difference. The message still appears.
This tends to point the finger at Acrobat Reader DC. Has something changed in how Reader DC handles JavaScript? Do I need Acrobat DC rather than Acrobat Pro 11 to keep my form working? Has anyone any ideas why this might happen?

The problem only appears in versions newer than 9. It should definately be something that you could configure your way out of in the trust center, but I have tried "everything" and I am afraid it is not possible.
Anybody who has a solution for this?

VBA Outlook Email Failing: "Outlook does not recognize one or more names"

I use VBA code to send emails from within Microsoft Project 2010 Standard to notify task owners of task status. This code has been working fine until the last couple of weeks. Now I get the error "Outlook does not recognize one or more names".
The VBA code sends email to each addressees internet address. I am referencing the Microsoft Outlook 14.0 Object Library.
I deleted the "suggested contacts" entries in my address book to no avail.
Below is the key snipit of code I am using. I get the error when the ".Send" line is executed.
When I check OutMail.To, .CC, etc everything looks fine.
Any suggestions would be greatly appreciated.
Dim OutApp As Object
    Dim OutMail As Object
    Set OutApp = CreateObject("Outlook.Application")
    Set OutMail = OutApp.CreateItem(0)
    On Error GoTo BadOutlookMail
   ' Change the mail address and subject in the macro before you run it.
    With OutMail
        .To = vTo
        .CC = vCC
        .BCC = vBCC
        .Subject = strSubject
        .Body = strBodyText
    End With

Hi,
I'm glad to hear your problem has been resolved by yourself, I hope this thread will hope other users who may come up against the same problem.
Thank you for sharing your experience here with us.
Regards,
Melon Chen
TechNet Community Support

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

10.8 - image capture - "import to" does not allow to select a program

Hi,
after updating to 10.8 I was hoping that my problem with 10.7.4 and Image Capture would be solved but it persist and additionaly has removed all my setings.
When Image Capture shows the pictures of my iPhone I select some pictures and go to "Import To Other".
That will open the "Open" dialog with all Programs/Applications on my Mac, but all Programs/Applications are grayed out.
Until 10.7.3 one was able to select any program to send the pictures to it like Evernote, ExifRenamer, etc.
Anyone else has the same issue?
Regards, Carsten
10.7.4 - image capture - "import to" does not allow to select a program

There is a work-around availbale now in the other thread.
10.7.4 - image capture - "import to" does not allow to select a program

AppleTV does not show up in Devices in iTunes on streaming MacBook Pro

My setup:
- AppleTV connected wirelessly to the wireless router (Apple Extreme N Base Station).
- Windows PC wired to the router and set up as machine that is sync'd to the ATV.
- MacBook Pro connected wirelessly to the router and set up as a streaming machine.
- All machines run iTunes 7.3.
The AppleTV appears as a device on the Windows PC. No problem there.
However, the ATV does not appear in the Devices list on the MacBook Pro 99% of the time and so I am not able to select it and change the photo albums I want to link. It occasionally appears. But I have not found a pattern to why it appears and disappears. Even when it does not appear in the Devices list, streaming from the MacBook Pro works just fine. So even as I am streaming, say, a podcast from my MacBook Pro, the ATV never appears as a listed Device.
I can make the ATV temporarily appear by unlinking the MBP from the ATV and relinking it. During the link process, the ATV appears in the Device list. But it disappears as soon as the code is entered in the MBP.
Confounding problem.

how would
it be if your mac continued to show every network
device, firewire/usb drive that it had ever connected
to whether they were still connected or not.
Yes, it would be annoying if EVERY device that my Mac had ever connected to did show up all the time even after they were disconnected.
However, there are some classes of devices that you do want your Mac to remember and show as available if they are detected active on a network. An example would a Bluetooth device that you have deliberately paired and designated in the Favourites list. If it was subsequently decided that this device should no longer appear, then removing it from the Favourites list does that.
In my opinion, the AppleTV should fall in the same category. Since pairing is required and subsequent dissociation is possible by removing it from the iTunes list of allowed AppleTV units, then it should appear on iTunes' list of Devices as long as it is detected on the network. If the ATV is unpowered or if the PC moves onto a different network, that that ATV should not appear in the Devices list. There is an advantage for the logic to be implemented this way for the reason I have mentioned in an earlier post (i.e. being able to change the list of photo albums designated as available for streaming without having to go to the ATV, select the source PC, then going back to the PC to change the list).
But again, just my opinion. It's always good to discuss these things so that others can see different opinions on an issue.

RoadMap does not return the selected step on ESS 600 Record Time entry

RoadMap does not return the selected step on Record Time entry application in ESS. Is it suppose to behave similar way or is it suppose to take user to the selected step. If yes , then is there a setting or customization that i have to take care of, as its a standard SAP delivered ESS Record working time application.
Please let me know. I appreciate your help in advance.

Check with administrator in the src configuration thing,
Cheers,
Apparao

Shared Review - Microsoft Outlook does not recognize recipients

Hello!
I am using Adobe Acrobot 9 Pro to try for a Shared Review of a document. I get as far as selecting people to send the document to. I click the "To" button which then goes into my companys Outlook contacts, and then after selecting a name I get the following error:
"Microsoft Outlook does not recognize "Inc./ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recpients/cn=cbuttars".
I know the cbuttars at the end of the error is the username I am sending the review to.
Does anyone know how to get past this error? Google was not very helpful in this situation.
Thank You!

We are having the same issue of trying to send a Shared Review from Adobe Pro XI and getting a error. We are currently using Outlook 2010. Hope someone from Adobe support can answer this issue and other Shared Review issues that are related in nature.

Microsoft Outlook does not recognize "@".

A user with Outlook 2010 running on Office 365 has begun getting an error message whenever he replies to or forwards an email from Outlook.
The error message is:
Microsoft Outlook does not recognize "@".
He then must select a username from the Global Address Book.
This does not happen when using the web interface. It also does not happen if he clicks on the From button and selects himself as the sender.
[Edit:] Another detail: If I look in the contact list for My Site, there is no entry for the user who is trying to send the email. Perhaps that is why when he tries to send it does not "know"
him?
Does anyone have any idea what would cause this?
Micah

Hello Micah,
I apologize for posting the wrong KB link! I meant to give you this one (http://support.microsoft.com/kb/2429946/en-us), somehow, copied the wrong one. Sorry for the mistake.
By the way, have you tried to input the full email address ([email protected]) manually while replying or forwarding? If that works without using Outlook Auto-Complete, then it could be an Auto-Complete cache issue.
Would suggest you to clean Auto-Complete cache on that PC then check behavior:
http://support.microsoft.com/kb/287623/en-us
For the download OAB issue, it's more like an issue on Exchange Online server side, not Outlook Client. Please first follow the troubleshooting steps listed in this article (http://support.microsoft.com/kb/2429946/en-us).
If the issue is not resolved, I would suggest you to seek workaround in Office 365 community:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
TechNet Community Support

"Check Names: Microsoft Outlook does not recognize '1. double click the attachment'" submit error

I have seen this question/issue on multiple forums and nobody seems to have an answer/fix yet. I included an e-mail submit button for my form, and when I practice submitting, everything sends fine. However, if I distribute the form (to allow for tracking, etc.) I get an error pop-up window that reads "Check names" "Microsoft Outlook does not recognize '1. double click the attachment'". What I mostly don't understand is "1. double click the attachment" is part of the directions/content in the e-mail after they actually, successfully submit the form. Why is the content auto-populating as part of the mailing address?? After you "Show More Names" and search for the correct recipient(s), you have the same error pop-up again with the 2nd step that's show in the content of the e-mail: "2. Acrobat will prompt you to select a responses file", until you select the recipients again by clicking "show more names". Then the e-mail populates, with "Completed Form&body=Instructions to add this form to a responses file: [email protected]?subject=Submitting" as a recipient, as well as the 2 recipients you had to search for.
Does anybody know why this happens and how to fix it!?

We are having the same issue of trying to send a Shared Review from Adobe Pro XI and getting a error. We are currently using Outlook 2010. Hope someone from Adobe support can answer this issue and other Shared Review issues that are related in nature.

My hp4530s wifi switch does not enable when selected

hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

Hi,
When was the last time that WIFI worked on the HP4530s? If you aer using a dock, then remove the laptop from the dock.
You can check the status of the WIFI adapter in Device Manager. You should have something similar to the below image if your model is equipped with WIFI.
The HP Support Assistant and also be used to troubleshoot network issues.
Look under the Internet and Security topics in HPSA for the adapter.
Try diagnostics under the My computer tab in HPSA
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

When i sync my ipod touch (4gen), my music does not appear on my device? what is wrong?

when I sync my ipod touch (4gen), my music does not appear on my device. What went wrong?

Hello,
The problem is that you just don't selected the music that you want to import.
You can do this by opening iTunes, search your ipod in the superior bar, select it, then will appear a screen showing the information of your ipod, you can check how many songs are in your ipod, if there says nothing so theres the problem. In the superior bar, select Music, then click on the box "Sync Music", now select the songs you want right down. And press "Sync" That should solve the problem.
Cheers

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Outlook Does Not Showup In "Select Device Application"

Similar Messages

Maybe you are looking for