OutOfMemoryError in unknown location

I am trying to track down an OutOfMemoryError in a large application. The error occurs when there is still room available for the VM to grow, provides no stack trace and there is nothing providing clues as to where it is occuring.
What I need is a way to identify where this is occuring. It is only occuring in production and the VM it runs inside houses 5 CORBA objects. The error could be occuring in any one of the calls on these objects or objects and methods that they call. The possiblities are nearly endless and would take an extremely long time to add code into each in order to find this error.
I have been experimenting locally trying to override the java.lang.OutOfMemoryError in order to attempt dumping a stack trace or providing some other type of helpful output, but am unsuccessful in getting the class to be used properly. I am overlaying it via the -Xbootclasspath argument sucessfully, but I do not see my constructors firing. Yet, I am able to call a custom method on mine and see output from it when I cast the caught Throwable, so I know mine is being used.
I also tried overlaying Throwable and again, I can see that mine is being used, but the constructors do not appear to be firing.
Any advice on how to get my OutOfMemoryError class working properly, get the original OutOfMemoryError object to dump a stack trace, or another way to proceed with finding where this error is occuring?
Any help appreciated. Thanks,

Did you ever figure this problem out?
I am having the same issue and can't for the life of me figure it out.
Thanks!

Similar Messages

Unknown Location

In the metadata filter I see unknown location but when I click on an image it does show city, state, country location information. How do I get the unknown status location to go away?

Did you ever figure this problem out?
I am having the same issue and can't for the life of me figure it out.
Thanks!

Workgroup client application issues during OSD/ No site assigned, unknown location

Testing SCCM 2012 operating system deployment with MDT 2013 integration.
I have a build and capture sequence setup and all is good apart from Application installs, they fail.
I've read through the other similar threads but nothing applied works in my scenario.
The same apps deploy to existing CM clients successfully.
Packages can be deployed successfully during the task sequence.
I've tried using the subnet the client uses as a boundary. I've tried an IP range, no luck.
I've added DNSSUFFIX SMSMP FSP in the setup windows and configmgr step
I've set the DP to allow anonymous access.
The MP dns srv record is present in DNS.
In the logs it always says the workgroup client is in an unknown location and therefore doesn't get a Site code.
The logs say that the MP info is missing even though I've tried /mp and SMSMP.
If I join the domain all is good. I don't want to join the domain during the build and capture sequence but if I have to then I will.
Any ideas would be very welcome.
Cheers

These are extract from the logs:
from clientlocation.log
<![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']LOG]
<![LOG[Workgroup client is in Unknown location]LOG]
from locationservices.log
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']
<![LOG[Workgroup client is in Unknown location]LOG]!><time="13:52:35.114+420" date="12-05-2014" component="LocationServices"
<![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!>
From smsts:
<![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:20.520+420" date="12-05-2014" component="TSManager" context="" type="1"
thread="2828" file="utils.cpp:5881">
<![LOG[Successfully completed the action (Use Toolkit Package) with the exit win32 code 0]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1" thread="2828"
file="instruction.cxx:830">
<![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1"
thread="2828" file="utils.cpp:5881">
<![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
file="installapplication.cpp:879">
<![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
<![LOG[   Setting URL = http:/SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="utils.cpp:6143">
<![LOG[   Setting Server Certificates.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6171">
<![LOG[   Setting Authenticator.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6178">
<![LOG[Set authenticator in transport]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:7734">
<![LOG[   Setting Media Certificate.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6195">
<![LOG[Sending StatusMessage]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: HNL-SCCM02.hnl.local:80 CCM_POST /ccm_system/request]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1"
thread="4088" file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="13:28:44.739+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:8939">
<![LOG[Policy Evaluation failed, hr=0x87d00269]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088" file="installapplication.cpp:1259">
<![LOG[Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_1BBC49FC-F46A-4773-8CEE-00AFF6383ECE/Application_a1a8c511-ded8-451c-b79d-b5ebb8d122eb'='']LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication"
context="" type="1" thread="4088" file="installapplication.cpp:66">
<![LOG[EvaluationJob complete]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:1278">
<![LOG[MP list missing in WMI, sending message to location service to retrieve MP list and retrying.]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="2"
thread="4088" file="installapplication.cpp:1051">
<![LOG[m_hResult, HRESULT=87d00269 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,1065)]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="installapplication.cpp:1065">
<![LOG[Step 2 out of 2 complete]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="daprogress.cpp:226">
<![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
file="installapplication.cpp:879">
<![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
<![LOG[   Setting URL = http://SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="utils.cpp:6143">

Oracle Service Registry: UDDI API v3 WSDL returns unknown-location-uri

Hi,
I've tried to access the UDDI API v3 wsdl and it's showing unknown-location-uri for all 3 APIs (security, publication, inquiry). I've tried updating tModels related to these 3 APIs and the results are the same. Does anyone know how to make it return a valid address location?
WSDL link: http://192.100.1.1:8021/registry/uddi/doc/wsdl/uddi_api_v3.wsdl
Result:
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="UDDI_API_V3" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:api_v3_binding="urn:uddi-org:api_v3_binding" xmlns:tns="urn:uddi-org:api_v3" targetNamespace="urn:uddi-org:api_v3">
<documentation>Copyright 2001-2005 Systinet Corp. All rights reserved. Use is subject to license terms. WSDL SOAP/HTTP binding for UDDI V3 Security, Publication and Inquiry APIs.</documentation>
<import namespace="urn:uddi-org:api_v3_binding" location="uddi_api_v3_binding.wsdl" />
- <service name="UDDI_Security_SoapService">
- <port name="UDDI_Security_PortType" binding="api_v3_binding:UDDI_Security_SoapBinding">
<soap:address location="urn:unknown-location-uri" />
</port>
</service>
- <service name="UDDI_Publication_SoapService">
- <port name="UDDI_Publication_PortType" binding="api_v3_binding:UDDI_Publication_SoapBinding">
<soap:address location="urn:unknown-location-uri" />
</port>
</service>
- <service name="UDDI_Inquiry_SoapService">
- <port name="UDDI_Inquiry_PortType" binding="api_v3_binding:UDDI_Inquiry_SoapBinding">
<soap:address location="urn:unknown-location-uri" />
</port>
</service>
</definitions>

perhaps it may help others .
It SSL handshake which is failing and that's because certificate is not trusted. certificates need be added to keystore of server.

I am in nanchang jiangxi china but my local weather and google map is showing unknown location so Plz help me

I am in nanchang jiangxi china but my local weather and google map is showing unknown location so Plz help me

The weather application is powered by "Yahoo". It doesn't have all cities listed in the database and your city is also not listen. Therefore it's not showing your local weather. You can "ADD" a nearby location in the weather application.
For the location problem, turn the location service "OFF" & "ON". Restart your phone (by long pressing the ON & OFF button on top right & slide to tun off). Then use a WIFI connection to run the google map application and locating your position. I hope this will fix the issue.

Unknown "Location" Parameter in Filter

I am using Access 2007 with tables linked to Oracle 11g with ODBC Driver 11.02.00.01
The table being filtered is "Object_Tbl" and the Column I'm filtering on is "Object ID."
When I try to apply the filter, just to select a few items, I'm seeing a dialog box prompting for a parameter value on OBJECT_TBL.OBJECT_ID.Location
If I click past the dialog, the behavior is inconsistent: either none of the records are returned or the filter is ignored and all records are returned.
I was thinking this "Location" parameter might be something coming from ODBC.
Any light you can shine on this subject for me will be greatly appreciated.

I have not worked with 11g version but I believe that if you use Answers as a datasource then you can not have parameters on the BI publisher side. Not sure if that has changed. Please let me know if this is incorrect.
I guess you would have to use dashboard prompts and presentation variables and note that the Presentation variable MUST BE same as the parameters defined in the BI Publisher. Take a look at the following link for an example.
http://kirti-bi-solutions.blogspot.com/2009/06/passing-parameters-from-obiee.html
Thanks,
Bipuser

I can't get icloud to show up on my computer (windows7 pc) to get photo stream to work....so my photos are streaming to an unknown location HELP!!!

I have followed all the directions online about going to control panel and then Network and sharing but icloud isnt there? I have searched my computer for it and nothing... Someone please help..... This is a brand new laptop so it may be something really simple because I didnt have this trouble on my last computer. Thanks for your time.
Ashley

Welcome to Apple Communities
First, install iCloud Control Panel

Problem with PnP devices, Unknown device, error code:28

Hello, my USB Mass Storage Device Not Recognized( Flash drive- HP v156w, 16 GB)
Full story : I opened flash disk, started to loading and opening files very slow, suddenly all writing, names of the files become unreadable. I took off the flash disk and try again. I got the message- disk have to be formated to be used
again. After a lot of try I got this message:
Unknown device doesn't have a driver ; and Problem with PnP devices when i run trouble shoot in devices and printers on my Sony VAIO laptop( Windows 8, 64 bit), and error code:28 for unknown device doesn't have a driver.
Do other usb devices work ok in the same usb port? - yes
Has someone else/or you used it on another pc?- yes
Does it work ok on a different pc? - the same problem
Did you pull it out with using 'Safely Remove Hardware'? - yes, a lot of time after its become invisible, unknoun
Was it previously working ok with your W8 laptop? - never tried befor
Disk Management can't see the drive.
device manager:
usb device with yellow sine and instead name strange sines
divice tipe - other devices
manufacturer - unknown
location- on USB Mass Storage Device
status: The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
I have done that -
"open device manager make sure show hidden devices is ticked and right click on all the USB hidden devices and unistall them. once done reboot and put in the flash drive again and see if windows finds it."
situation the same(((( Disk Management can't see the drive.
please if any one know the fix please help
Its very important info for me on the flash disk.

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

RFC error code 91 : Host name or service of thge message server unknown

RFC Test connection is getting failed with following error
ERROR                service 'sapms<sid>' unknown
LOCATION             SAProuter 37.12 on prosaprt01
DETAIL               NiPGetServByName: service 'sapms<sid>' not found
CALL                 getservbyname
COMPONENT            NI (network interface)
COUNTER              5088
MODULE               niuxi.c
LINE                 524
RETURN CODE          -91
SUBRC                    0
RELEASE              640

Hi Cool,
              Make sure on your server(if it's windows)
C:\WINDOWS\system32\drivers\etc\services is having this bellow line
sapms<SID>     36<nn>/tcp     # SAP System Messaging Service Port
I guess you can realize that 36<nn> is the messaging server port, so you can in put your system no. in place of <nn>.
If you are trying too connect to another system and make sure it's port is also added in the service file and it's open (accessible from this system).
Regards,
Hari.

Location Assignment not working

Hi Guys - Have I gone mad
I am trying to get Location Assignment working and appear to be having some problems.
My environment is Server Windows 2008 R2, Workstations XP SP3.
I have performed the following tasks.
Created a Corporate Location
Created a Network Environment and assigned it to the above Location
Created matching criteria in the Network Environment which at the moment is the IP Address of my test Workstation.
Create a Location Assignment Policy and Assigned to my test Devices
When I look at the client agent, as I have permitted the Locations to be manually changeable, I can see both the Unknown Location and the Corporate Location. However no matter what Network Environment Settings I use I cannot get the Workstation to match my Corporate Location and the Agent always assigns Unknown for the Security Location and Unknown for the Configuration Location.
Am I missing a step or have I gone mad. Please help Im going round in circles.
Regards
Chris

Originally Posted by arothe
Hi Shaun,
we have a similar problem. Created a new Location and new Location environment. Our minimum match is only 1. The interesting thing is that it is working on our "old" fujitsu workstations, but not on our "new" hp dc7900 sff workstations. So the settings must be ok and we think it is hardware related. Tried different network drivers for the hp workstation but no change. Also compared the services that are running, no change. We are using german win xp sp3 on our clients. No matter if novell client is used or not. Our Primaries are running on sles 10 sp3.
The hp clients always show ~unknown~ in confiigurationlocation in agent status.
Any suggestions?
Andr
I found out that this problem is NIC-related.
This is the NIC which is not working:
Intel(R) 82567LM-3 Gigabit Network Connection (HP DC7900 Small From Factor)
I then used this "Intel(R) Pro/100+ Management Adapter" in the same workstation and disabled the integrated NIC. That did the trick, the location was right now.
So this is a hardware-related bug.
What NIC are you using Chris? Maybe its the same one...
Cheers
Andr

Management point location for workgroup clients in DMZ

Hi All,
I am trying to install the SCCM 2012 client to some servers that are located in a workgroup and in a DMZ at our organization.
I have read up about the config for this and I think that we have everything in place but the clients themselves are not locating a management point which I think is due to the setup of the IIS on the management points.
Firstly, I ammended the local hosts file on the system to ensure that the server could resolve the SCCM site server and 2 management points by using NetBIOS and FQDN. I also checked that the ports are opened from the client to the
management point.
I then ran ccmsetup using the following switches /noservice /mp=smsmp SMSSITECODE=XXX SMSSLP=SMSMP FSP=SMSSITESERVER CCMHTTPPORT=24555 CCMHTTPSPORT=24556 RESETKEYINFORMATION=TRUE which appers to have sucessfully installed the client
but is now failing to communicate with the MP specified. I am seeing on the client the following repeated in the locationservices.log
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
            DateTime = "20141127153834.775000+000";
            HostName = "SMSMP";
            HRESULT = "0x87d0027e";
            ProcessID = 4004;
            StatusCode = 401;
            ThreadID = 5184;
]LOG]!><time="15:38:34.775+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184" file="event.cpp:715">
<![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184"
file="ccmhttperror.cpp:396">
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="3"
thread="5184" file="util.cpp:2568">
<![LOG[Workgroup client is in Unknown location]LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184"
file="lsad.cpp:1078">
<![LOG[[CCMHTTP] ERROR: URL=http://SMSMP, Port=24555, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="15:38:34.993+00" date="11-27-2014"
component="LocationServices" context="" type="1" thread="5184" file="ccmhttperror.cpp:297">
And on the management point I am seeing the following repeated in the IIS logs
x.x.x.x HEAD / - 24555 - x.x.x.x SMS+CCM+5.0 - 401 2 5 216 0
I understand that this points to the IIS authentication issue so I have tried browsing to http://smsmp.domainname.com/sms_mp/.sms_aut?mplist and
I do get a list of management points returned so I'm a little confused now. The other thing that confuses me is that we also have another domain we manage clients
in and these systems have all registered with the MP fine even though there is no trust relationship in place between the 2 domains.
I have checked anonymous authentication has been enabled on the SMS_MP virtual directory but I can see that it is set to use a user account of IUSR, but this is not a local user on the MP nor an AD user from what I can see.
Is anybody able to point me in the correct direction of either what I am doing wrong or which settings I should be checking?
Thanks in advance for any help
Andrew

You mention in your ccmsetup install properties: CCMHTTPPORT=24555 CCMHTTPSPORT=24556
While the MPList test you provided shows:
http://smsmp.domainname.com/sms_mp/.sms_aut?mplist
This is on port 80
Where is your MP? Port 80 or 24555 ?

Missing drivers for unknown device

Hi all, I installed Windows 8.1 on a HP Pavilion Notebook - 15-p101 and managed to fix all missing drivers but this one.
Device unknown
Location: on PCI Bus
ACPI\HPQ6007\3&11583659&0
Any help would be greatly appeciated. Thank you.
This question was solved.
View Solution.

Hi:
You need this driver...
HP 3D DriveGuard Software
File name: sp67280.exe

Service 'sapgw53' unknown / CPI-C error CM_PRODUCT

Hi SAP Gurus,
I am trying to create RFC destination in 46d system and while testing the connection I am getting following error message. Pl. help mein resolving the issue. I have created the RFC destination successfully from one system to this system. But gettin this error while creating RFC in this system.
"service 'sapgw53' unknown / CPI-C error CM_PRODUCT"
Following are the details
ERROR                service 'sapgw53' unknown
LOCATION             SAP-Gateway on host nlaslt12 / sapgw01
DETAIL               NiIServToAddr
COMPONENT            NI (network interface)
COUNTER              59493
MODULE               nixxi.c
LINE                 2338
RETURN CODE          -3
SUBRC                    0
RELEASE              46D
TIME                 Fri Dec 14 14:53:42 2007
VERSION              34
thanx,
Rohit

Hi Juan,
Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
Thanx and Regards,
Rohit

How to add app to location services in lion

My macbook pro was running under SL then I updated it to Lion, I read about the location services in mac is activated, now I have everything enabled in my system preferences but there is no applications in the list
I tried to use safari with twitter, I hit the location icon but it shows unknown location and still safari was not listed in the system preferences
any idea guys!!!

Check out Safari > Preferences - Privacy
You'll see settings for location services there.

Every geotagged pictures imported labelled as Unknown Place

Hi have lately installed iPhoto 8.0 (from iLife '09) and I like it a lot. I already had some of my pictures that were geotagged (the pictures took from my iPhone) but iPhoto does not name the place for them. They all appears as "Lieu sans nom" (or Unknown place in English...I am operating in French).
I did verified in the iPhoto preferences and the "search for place" is set to "automatically". I also tried to export, rename and reimport without success. The pins are correctly positioned but since the place is not named, I cannot use the browse feature (by country, states, etc.).
What I am doing wrong?

I tried to see if there were strange location properties using EXIF Viewer and everything seems fine. There is noting defined in the location. Just plain good latitude & longitudes. Just FYI, you do not need EXIF viewer to verify this. You just have to show the image properties from iPhoto.
One development. The same pictures on another computer gives perfect results. The location are identified correctly and there is no more Unknown location.
I tried to rebuilt my whole library from scratch using iPhoto Library Manager and it gives the same exact result. Again, the same original pictures imported into another computer works perfectly so I don't think that this issue comes from the pictures. Furthermore, to rebuild the library from scratch do not help.
Can you help me?

OutOfMemoryError in unknown location

Similar Messages

Maybe you are looking for