Output Determination Error

Hi Gurus,
I have already customize the output determination for generating message proposals when creating a sales orden.
It functions correctly, setting the message in "Not Processing " status.
After I run RSNAST00 program, the status of the message change to "Process with errors."
After making some debuggin to the program, I notice that the following fields were empty:
ADRNR
ADRNP
ADDRESS_TYPE
Causing the error message I just explained.
This functionality runs correctly in QAS, but not in PRO.
Do you know why it happens?
Thanks you very much!

Hi Shiva Ram,
I just checked the tx vv22/vv23 and my z output type is not found.
I also checked for the i in va03, and notice the following:
Diagnosis
A valid output condition has been found for the application object.
System Response
An output proposal is created.
Procedure
Execute function
Diagnosis
Output ZVEN has already been issued. Multiple issue for this output type is forbidden in Customizing.
System Response
This output cannot be created again.
Procedure
If you want to issue output type ZVEN several times, set the indicator for multiple transmission in Customizing for this output type in the current application.
The settings in QAS and PRO are the same, do you know why it happens?

Similar Messages

Regd:Error in Output determination for Delievry document

Hi,
we have set the output determination ~ Condition record for Ship-to-party Partner function for the delivery document.
The condn is set by using LAVA as the Output type and when we save the delivery doc, output is not getting triggered and when we try to enter the output details manually we get the below error
"Maintain outgoing EDI-connection data for partner XXXX " .
Could you please tell me what settings that I might have missed ?
RGds,
Vasanth.
Edited by: Vasantha Kumar Balasubramani on Jun 25, 2008 3:31 PM

Hi John & Sharath,
I have the partner profile defined in We20 for the Ship-To-Party for whom I am sending the delivery.I have set him as my customer(KU) in partner profile John.
Sharath, I know we have 2 EDI settings at VOE2 and VOE4 but both of them are for inbound messages. Could you please tell me what else EDI settings do i need to do ?
Thanks in advance.
RGds,
Vasanth.

Error in output determination via collective billing VF06

Hi,
We are facing error in output determination when collective billing is done. Multiple Orders numbers are entered in VF06 and processed to generate billing documents. VF06, which is used for batch billing, creates a batch job which internally calls VF04 to do this. For some of the invoices generated from the documents, we do not have anything in the Output, i.e. when we open the invoices in VF03 and go to Goto->Header ->Output, nothing appears.
Say out of the 5 documents, 2 should have output determined and 3 do not. Then we see that it appears for either of the 2 or does not appear at all.
This does not happens when the documents are processed one by one in VF04. We have to do collective billing and generate one invoice for each document. The condition records are also maintained correctly.
Regards,
Tarun

Go to some of the invoices on which no output has appeared in change mode and do a output determination analysis in Go to Header-Output and then Ouptut Determinatino analysis.
Please do this analysis for atleast 10 problamatic invoices. This will give yousome insight into the problem

Output determination ----Urgent

Hi , I got a problem regarding Output determination in SD.
There is credit memo , created based on an invoice. When iam taking the "Print preview " at the header level of the credit memo, " the Reference no./Date "
is not showing anything.
When Iam checking the "Edit" button at the header level and then clicking on the "Processing Log", it is showing the following information:
    1. Object 0062000080
     2. Output type: Order Confirmation
     3. Processing log for program RVADOR01 routine ENTRY
     4. Appl. V1 - Problem during data retrieval -
         Table/structure   VBAK
     5. Window TITLE is not defined for form RVORDER01
     6. Element HEADER_DATA window MAIN is not defined
        for form RVORDER01
     7. Element HEADER_TEXT window MAIN is not defined for
         form RVORDER01
So, plz help me resolve this issue . What is the error and how to resolve this error?? Its an urgent case
Thanks with regards
Sourav Bhaumik

Dear Sourav,
          Chect the output type program RVADOR01 with the help of the ABAPer then debug the program then you can come to know what is the exact problem.
-->Before you Check the output determination assignment to the Creditmemo and output type assignment.
I hope it will help you
Regards,
Murali.
Edited by: Murali Mohan.T on Mar 31, 2008 8:34 AM

No output determined for GR slip

Hi Experts,
Need your help to analyze a situation.
My system is not able to determine a output condition record for a material document for GR. The system ends up in a error "The system could not create any outputs". Although the system immediately generates a output when the printer name is filled in the condition records.
Settings currently done in the system:-
- Proper customizing exist in the system for output detrmination for Inventory management.
- Print parameters for WE01(individual slip) is set to S "User parameters".
- Condition record maintained for WE01 with dispatch time 4 for a "print" output. The printer field is kept blank.
- User parameter NDR not Set. The check box XNAPR is checked manually.
- A printer is set in the User parameters -
>Defaults -
Output device -
ML0001(physical printer).
OSS notes already checked:-
446041 (sympton 2 applies, but it doesnot help).
426554 (all settings done as per the checklist)
The system should act as below but unfortunately it doesn't.
The system checks whether a printer has been specified in the condition record. If so, it is used. If not, it checks the message type to see whether a print parameter has been set. If no parameter has been set, no message is generated. If a parameter has been set, a printer is sought in accordance with this parameter. If a printer is found, it is used to output the message. If not, no message is generated.
Please help me with your expertise.
Regards
Raj
Edited by: RajKiran Mohanty on Mar 8, 2012 4:31 AM

Hi,
I am not sure but check this
sap 426554: check lists for output determination and printer determination for goods movements
Checklist 2: Check printer determination Customizing
1. Which printer do you want to use?
Printer: _____
Is the printer defined in the MM-IM Customizing? (Customizing MM-IM > Print Control > General Settings > Printer setting)
Entry exists: _ yes / _ no
2. Does the condition record have a fixed printer (see question 6 of checklist 1)? (Customizing MM-IM > Output Determination > Maintain Conditions > Communication). Note that it does not usually make sense to define a printer in the condition record otherwise all messages are printed with this printer.
Printer in condition record: _ yes: Printer ______ / _ no
3. Which print parameter does the output type have? (Customizing MM-IM > Output Determination > Output Types)
_ Plant/storage location (7)
_ Plant/storage location/user group (9)
_ User (combination of output type/user name) (U)
_ User parameters (printer from user master record) (S)
a) Printer determination according to plant/storage location (7)
Which plant/storage location do you use?
Plant: ____ Storage location: ____
If the purchase order has an account assignment, the storage location is initial.
Is there an entry for the printer determination with the above combination? (Customizing MM-IM > Output Determination > Printer Determination)
Entry exists: _ yes / _ no
b) Printer determination according to plant/storage location/user group (9)
Which plant/storage location do you use?
Plant: ____ Storage location: ____
If the purchase order has an account assignment, the storage location is initial.
With which user is the material document posted? (See question 7 of checklist 1)
User:________________
Which value does parameter ND9 have for this user (display user master record > parameters)
Parameter ND9 (user group): __________________
Is there an entry for the printer determination with the above combination? (Customizing MM-IM > Output Determination > Printer Determination)
Entry exists: _ yes / _ no
c) Printer determination according to user (output type/user name) (U)
With which user is the material document posted? (See question 7 of checklist 1)
User:________________
Is there an entry for the printer determination with the above combination? (Customizing MM-IM > Output Determination > Printer Determination)
Entry exists: _ yes / _ no
Have you mark fixed indicator for printer?
Regards
Kailas Ugale
Edited by: kailasugale on Mar 8, 2012 2:14 PM
Edited by: kailasugale on Mar 8, 2012 2:16 PM

Handling unit output determination questions

I have configured a new output type for a custom label we need to implement for handling units.   It is assigned as V6, for Ship-to Party/Shipping Material.
In VL01N or VL02N, I am able to create the handling units and pack the delivery line item materials into them.
I am able to manually assign the output type to the handling unit in VL01N/VL02N, but have not been successful in getting the output type to auto populate. I have verified that it is not populated after packing the HU and saving from VL01N, or when doing from VL02N, or after PGI.
I have been searching the forums and have not found the answers I need.
1. Is it possible for the output type to automatically populate for a handling unit? If so, at what point should this happen? I would think based on how our custom label output types for delivery documents behave, it would assign after save from either VL01N or VL02N.
2. When I create the HU, I specify a VERP packaging material number that represents the carton in order to create the HU. I do not have the material on the sales order or delivery as a line-item, and I am not getting any error messages indicating that it should be.
If this should work the way we expect it to, any suggestions on what I have overlooked that would prevent my output type from automatically assigning?
Thanks in advance for your help.
Dave

Hi Joan,
Thank you for your answers. They were most helpful. I was finally able to get the new Output Type to assign after I created the HU's and saved the delivery.
Hopefully you won't mind if I ask some related questions.
1. If I went to VL02N for a delivery where I had already created the handling unit, it did not automatically get the Output Type assigned when I saved. (Like it does for our delivery based labels when I add a user in NACE that previously wasn't identified to get the label.)   Is this the normal behavior for HU-based output or am I still missing something in my setup?
2. I did the VHAR step and specified both the Output Determination Procedure and the Output Type of my new label,as suggested.   This did work once I finally tested by creating a new HU for a delivery, rather than checking an existing delivery/HU. Is entering the Output Type here critical? If another customer has a different label format, I think assigning the Output Type here this will cause a problem for us. (I haven't had a chance to change the config to remove this and see if the Output assigns based on references elsewhere, now that I know it seems to assign only when the HU is initially created.)
Thanks again!
Dave

Output determination for purchase order

Dear friends,
Please help me, how to create condition record for both printout and email for output determination of standard PO.
I have created condition record through MN04 for Purchase order with medium(external send) and it worked.
I also need to create condition record for printout. Because Client wants to select either email,fax or printout. They will select whatever sending option.when i tried to create condition record for medium(1-printout).I got an error " The condition record entered already exists". So i tried to change that condition record,but i got here also error as "The condition is being processed in the current session".
Please help me to set up condition record for both mail and printout for standard PO.
Thanks

For this kind of option you need diff message type like
use NEU for Fax and Print and for Email create new message type than it will work.

Out put determination error in billing

Hi
In my current project I have to do printing of mass billing documents at once
For this i configured output condition type ZD00 and access sequeunce ZBNG
I have defined procedure Z10000 and assigned condition type to it and done all necessary configuration
When i create billing document and take print preview the values come correctly .but when i go to the t code vf02 and see the header --output the out put is determined but shows color RED indicating error
My abaper has debuuged the programm and found that two tables T682V and T683S should contain the entries of condition type ZD00
Table T683S containes the entries but in table T682V the enrtires of condition type ZD00 are not found
What i want to know is that is there a config setting to pass entries into this table so that i can do the same
Thanks and Regards
Suneel Srinivasan

Hi,
Pleae compare your configuration with below article. You should be able to find the missing configuration. Output configuration is done under the transaction NACE. If you configure it correctly and then maintain output condition records correctly, system should issue them.
[Output config|http://learnsaptips.blogspot.com/2010/08/output-determination-in-sap.html]
Please let us know if you can't find what is missing!
Best regards,
Rahal

Output determination for POs - by purchase org?

I'm testing some address changes we made on our PO forms in 3.1i - I set up the output determination, and I'm able to print all POs I need... However, there are a few POs that wont print out, actually they won't even go to SP01 - When I go back to check the output determination, i notice that their is a "2" under the processing status, which means a "processing error."
Is there any link between Purchase Org and Output determination which would cause a PO not to print? What can I check (in detail please ) ? Any suggestions would be great...
Thanks
James

Is there any link between Purchase Org and Output determination which would cause a PO not to print?
If you are used purchase org in access sequence to get output condition record then it has a link.But this will not cause to go your output into error status.
What can I check (in detail please ) ?
Check with your Your technical team (ABAPer) why it is going error.Go to PO change mode again and repeat your output and before saving your po ask your ABAP person to debug the screen.
Some times if you use any Z tables then some of your data missed then it may go to error process.

PO output determination in Extended Classic SRM 7

Hi,
Has anyone done PO Output in SRM 7 as per the SAP Note 883693 (ECS: PO output determination in R/3)? Appreciate any feedback.
Thanks,
AB

The same error should appear in ST22. Run the transaction and locate this error entry. Then set an external break point at the statement before the dump and run the scenario in debug mode. You should be able to identify the error from there.

Config to email using output determination

Hi,
I'm trying to set up output determination that will email a PDF of the invoice at the time of invoice creation. I've created a communication strategy with a single entry for communication method "INT" for email. I added an entry for simple mail(7) in the processing routines config of the output type and pointed to my sapscript form and print program. I created the master data record using VV31 and added my own email in the communication section of the master data record. When I create my invoice, the correct output record is determined, but when it attempts to process at save, the system returns with errors in the processing log. The error message states "No communication type from strategy RD00 could be used". The diagnosis section of this error message says that the message type should be sent with a communication type, but I don't understand why this information is not pulling from the configuration that I set up. Any help would be greatly appreciated!
Jim Tollett

Hi James,
Every output type has a driver program (and subroutine combination) configured for each communication medium. Usually what you are looking for (email PDF) is not supported by most of the standard output types. You may need to write a driver program for this communication medium (7) or enhance the standard to support simple email.
Cheers,
Sanjeev

Output determination - Requirement

Hello Gurus
I have an output type which is always entered as manual only in the sale order. If the order is on credit hold then system should issue an error message when the user selects this message type. I have created a requirement for this and attached in the determination procedure. When the output type is entered manually system is issuing a message stating that for manually entered output types requirements won't be executed.So the requirement is not getting executed. Any other way to solve this?

Hi There,
The solution for your problem is simple just setup the output type using automatic output determination instead of manual entry
Anyway, you can revamp the requirement, create another user exit to check the credit status against the output type on USEREXIT_SAVE_DOCUMENT_PREPARE in program MV45AFZZ.
Regards,
Gumanti

Output determination during delete order

Hi,
As per requirement, When a unprocessed order(which doesn't have any further documents) is deleted in SAP, it has to update certain Z tables. How can this be achieved using using Output determination/ output types?
How does output determination works during order deletion?
Thank You in advance.
Thanks
Challa

Hi
To update the Z table, use the USEREXIT_DELETE_DOCUMENT in include MV45AFZZ (see the comments).
For output control, see SAP Note 960611 - FAQ: Output control in Sales and Distribution, question 2. It says that you have the report SD70AV1A to process messages for SO.
Note 701163 - Correction report pricing create a ZZ subroutine in MV45AFZZ with a SUBMIT, so I understand that it's possible alghough I have doubts if it'd be advisable, but you can try to do a SUBMIT to SD70AV1A before update the Z-TABLE, but check it and be careful. For instance, be sure that the message exists in table NAST and so on, to avoid error messages.
I hope this helps you
Regards
Eduardo
PS: Other idea, cleaner than my first anwer. See SAP Note 32662 - User name added to new condition table. Perhaps you can enhance KOMKBV2 with any indicator of deletion and so, it could control the output scheme in a VOFM subroutine. For instance, if you are deleting, T180-TRTYP = 'L'. It's other idea.
Edited by: E_Hinojosa on Jul 12, 2011 6:19 PM

Output Determination / Partner Profile

I have a vendor with an LI Partner Profile setup in the system. Every time an invoice is posted against this vendor, I need the system to generate an IDOC for external transmission.
How do I setup the output determination to make this happen?
Thanks - points will be rewarded.

I just did changes with my access sequense, was using Sales Org/ShipTo/BillTo but just changed to Billing Type and it worked fine, I got my error.
Just one more question, I am doing this output via medium 6 and date 4 (send immediately) now since my output is founf in the billing doc and it is saving properly what is my next job to create the programme?
Please provide me the steps.
Thanks for your help !!!
Aman

Output determination problem

Dear Pavan,
How do i stop RD00 output type to trigger in the billing document if an SAP Accounting document has been created.
My requirement is to stop RD00 from firing if the accounting document is not generated in the billing document.
I tried out with routine 62 in the billing output determination procedure but it seems to be not working.
I think i should use some logic into in the 62 routine and obtain this functionality?
Now my questions is what logic should i use which would stop RD00 from firing output when the accounting document is not released in the billing.
Or suggest me how do i have to do it.
Thanks in advance,
Praveen

You will have to use user exit for this, I dont have have the name of user exit but logic will be like this,
When billing doucument is saved accounting is generated, and status is updated in VBRK table.
In VBRK field RFBSK is there i.e posting status.
Just put a check at the time of saving the billing document , if the satus is not posted give error message that output cannot be issued
Take help of abaper to stop issuing of the output.
Thanks and Regards

Output Determination Error

Similar Messages

Maybe you are looking for