Output ipconfig to html

Hi All,
It sounds simple but it makes a bit of a mess in the html. I have tried using convertto-html and also tried manually creating the html by creating a string with the header etc... as follows:
$file = "c:\temp\a.html"
"<html><head><title>Network Report</title></head><body><h1>IPConfig /All</h1><pre>" + (ipconfig /all) + "</pre></body></html>" | out-file $file
I hoped to make this look like the results of ipconfig are in a black box with green text, a bit like a command window, but inside an html page with links to the various parts. I want to use ipconfig as I have many other commands that would be too difficult
to convert into powershell.
Any help would be greatly appreciated.
Thanks

The issue is that HTML does not respect line breaks. If you want to send text to a webpage you must convert line breaks into "<br />" tags.
So this would give you the output nicely formatted:
$file = "c:\temp\a.html"
$ipconfig=ipconfig /all |%{"$_<br/>"}
$body=@"
<html>
<head>
<title>Network Report</title>
</head>
<body>
<h1>IPConfig /All</h1>
<pre>$ipconfig</pre>
</body>
</html>
$body | Out-File $file
. $file
¯\_(ツ)_/¯

Similar Messages

Execute command and save output in a HTML File

Hello Guys,
I have a requirement and for that i have to do following. a) read a file in an array and then execute a command for each value in that array. after that i want to store the output of command and value of array in another array.
i am doing something like below.
set objtextfile = objfso.opentextfile _
("c:\temp\aaaa.txt", forreading)
j=0
Do until objtextfile.atendofstream
redim preserve arr123(j)
arr123(j) = objtextfile.readline
j = j+1
Loop
for each server in arr123
chk_status = "command" &" "& server
set objexecobject = objshell.exec(chk_status)
'Here i am not sure how to proceed further to achieve what i described above.
Next
Can someone help me with this?
-KAKA-

Thank you for your response.
So here is what i want to do.
Query a database using odbc from my management server (odbc is configured and connection is tested) and based on the query it will result out few list of servers. then from the same management server i want to execute a command against all the resulted server
(management server has a binary which can execute remote action). this remote action will get output back.
then i would like to store the name of server and resulte output in a html file which should look like below.
which i will later host on apache.
YOu do not need to move things in and out of arrays and files.
>>>> You are right but as i stated, i am not a core programmer and due to nature of my job i have to work on perl, shell and VB Script, apart from my actual technology so it becomes difficult to write it with perfection.
I hope you understand.
-KAKA-
-KAKA-

Save report output automatically into html

Hi Gurus!
I have few reports that give a simple list output as result.
Now I want to put an option in the output , an option that will be
a save buttom which when clicked will automatically save the output
into an html file and archive it to a particular folder.
I would like to know how to automatically archive the report output
when this save buttom is clicked to a folder.
DO we do it after we have printed the report in the output
and how do we go abot doing this .
Regards
Sumit

Hi,
After running a report, call this function module WWW_LIST_TO_HTML
to convert the list output to HTML.
Best Regards,
Krishna

How to send console output to a html page

hi,
i wrote a java program, in that i used "System.out.println()" to print the output in the console. Now i want to print this output as a html page. output file is a simple physical HTML file. Please help me regarding this issue. Thanks in advance.

Hi,
you can use log4j.jar or comman-login.jar through you can do it. if you want more information related log4j then see this
http://www.roseindia.net/tutorials/log4j/index.shtml
Thanks,

Reports output as seperate HTML

HI all,
I have a situation I am using reports 6i and XP
I have a report with 60 pages
What i need to do is i need to generate report as each page as one html and save it some where
For example I have 60 pages I need to get output in 60 html pages or save 60 html pages
Is it possible to do in report
Any help is appreciated
Thanks

Hi
Sorry I was wrong. In Reports 6.0 onwards, HTML page streaming ia avilable, means that you can display individual pages of your HTML/HTMLCSS report output in the browser, without having to download the entire report. From the first page of the report, you
can navigate to any page by clicking from page to page or by entering the page number required.
Thus, HTML page streaming gives navigation controls to the web report. In its simplest form, page streaming is very easy to implement. The parameter PAGESTREAM=YES is used.
HTML page streaming uses a built-in JavaScript provided by Reports. To implement HTML page streaming, the default JavaScript provided can be used or your own JavaScript can be written.
To view the built-in JavaScript:
1. Go to the Report property palette by double clicking in the Report name in the object navigator.
2. Choose the 'Page navigation control value' property.
3. Click on the 'more' button; this will open the built-in JavaScript script.
If you wish to implement your own JavaScript, this file can be updated, or your own script can be referenced by setting the 'Page navigation control type' property to file and putting the filename of your JavaScript in the
'Page navigation control value.'
Please refer to Reports documentation on more on Page streaming feature.
Thanks
Rohit

Can TestStand 3.0 generate XML output instead of HTML?

Can TestStand 3.0 generate XML output instead of HTML?

Hi
TestStand can generate XML reports instead of HTML.
This can be changed under Configure -> Report Options and choose XML instead of Html
Hope this helps
Regards
Anand Jain
National Instruments

Converting Smartforms output content into HTML File

Hi,
I have a requirement, Smartforms output contents needs be converted as HTML File and it should be sent as email.
I am able to get the Smartforms output in html format but the output is shown as binary format.
After the fm call the job_output_info parameter is holding the smartforms output content in
job_output_info-XMLOUTPUT[]           (xsf content)
job_output_info-XMLOUTPUT-STSHEET[]   (css content)
job_output_info-XMLOUTPUT-TRFRESULT[] (html content)
Help me out how to handle the job_output_info details to html format.
Code
DATA v_fm_name TYPE rs38l_fnam.
DATA v_tdsfname TYPE tdsfname VALUE 'ZVR39_SF'.
DATA output_options TYPE ssfcompop.
DATA job_output_info TYPE ssfcrescl.
DATA document_output_info TYPE ssfcrespd.
DATA job_output_options TYPE ssfcresop.
DATA w_control TYPE ssfctrlop.
*-Finding the Smartform Layout Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = v_tdsfname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
*-Defining the output to HTML Format
*-Activating XSF Output
output_options-xdfcmode   = 'X'.
output_options-xdf        = space.
output_options-xsfcmode   = 'X'.
output_options-xsf        = 'X'.
output_options-xsfoutmode = 'A'. "
output_options-xsfoutdev = 'P863'.
output_options-xsfformat = 'X'.
*-Calling the Smartform Layout
CALL FUNCTION v_fm_name
EXPORTING
    output_options       = output_options
    user_settings        = 'X'
IMPORTING
    document_output_info = document_output_info
    job_output_info      = job_output_info
    job_output_options   = job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
Giri

Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf

Output Report in HTML format thru Oracle Forms. ASAP!!!

Hi,
How can i create a HTML output format thru Oracle Runtime Form?
I have tried using the .REP and i was able to produce the HTML output format but when call the .REP using Oracle Form i was not able to produce the desired output.
Attach below is the code. Seems like something is wrong with the code
Thanks,
Jen
DECLARE
pl_id ParamList;
--subheader varchar2(1000);
BEGIN
** Check to see if the 'tmpdata' parameter list exists.
pl_id := Get_Parameter_List('tmpdata');
** If it does, then delete it before we create it again in
** case it contains parameters that are not useful for our
** purposes here.
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
** Create the 'tmpdata' parameter list afresh.
pl_id := Create_Parameter_List('tmpdata');
** Add 1 data parameters to this parameter list
*/ -- subheader is a parameter created in Oracle Reports
--subheader := :variable.txt_message_yes;
--Add_Parameter(pl_id,'SUBTITLE',TEXT_PARAMETER,subheader );
**Pass a Parameter into PARAMFORM so that a parameter dialog will not appear
**for the parameters being passing in.
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
** Add the account_no parameters to this parameter list
Add_Parameter(pl_id,'P_ACCOUNTNO',TEXT_PARAMETER,:account_no);
* Run the report synchronously, passing the parameter list
*/ -- ABC is the report name
Run_Product(REPORTS, 'c:\Fusion\FusionInvoice.rep',
SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
END;
null

Hi there,
You have to add 3 parameters to param list :
DESTYPE with value "FILE"
DESNAME with value of desired filename
DESFORMAT with value "HTML" or "HTMLCSS" (for cascading style sheets)
Hope this helps.
Regards, Kai

Output Reports in HTML

Hey guys. Im trying to output a report a HTML file. I know this is possible because i've read a good bit over white papers talking about the functionality, but I haven't been able to find a source that details the step by step instructions on how to create a report which exports out to a HTML file. Is there such thing?
Im thinking its a few simple settings on the reports builder, but i can't find them. Can someone point me to the correct documentation or show me how to do it? Thanks.
Mo

Hi,
Set destype=file and desformat=html
Regards
Arif

Output format in html

Hai..
In Classical Report , i'm getting the correct output format. While spooling in sm37, the report sent through mail in html format. In html format ,the output alignment is coming wrong. Plz hrlp to resovle this.
Regards,
P.Rajalakshmi.

thanks

Running gif animation and a random image output from an html button, HELP!!

Trying to click (onClick) an animated gif image of an on/off switch to start a second animation which is located on a different location on the web-page (a 7-frame animation of a generator with moving parts) immediately followed by a random image selection function placing an image in a 3rd location on the page (next to the generator image). The random images are supposed to look like the result of the generator animation---the item that “pops out” of the generator.
We thought the process to achieve this would be an “OnClick” on the on/off switch-animated-gif to start two javascript functions (generato animation function & random image function).
To further complicate matters, we are doing this website in iWeb. We’re using iWeb SEO Tool to add the javascript to the header and HTML snippet in iWeb to place the HTML code. Not sure we’re actually doing the snippet right though---is it supposed to relate to the images---or is it separate? When the gifs are place on the iweb page, they work in the browser upon page load---the “on-click” & the random image function are NOT working...so we know we’ve done something(s) wrong.
We’re thinking that we’re probably missing some code that describes where the 3 different image-spots are on the page (image #1 is the on/off switch gif, image#2 is the generator gif, image#3 is the generator output.png)....or just aren’t coding the string of functions correctly---or maybe our strategy for achieving this is just no correct (?).
Here is the code we have tried that didn’t work. We desperately need a solution quickly and are open to any/other ideas for how to accomplish this. THANKS YOU in advance for your help!!!:
script language = JAVASCRIPT>

Random Image Link Script
By Website Abstraction (http://www.wsabstract.com)
and Java-scripts.net (http://www.java-scripts.net)
function random_imglink(){
var myimages=new Array()
//specify random images below. You can have as many as you wish
myimages[1]="christmassweater_GENERATOR_files/cotton_candy_christmassweater.png"
myimages[2]="christmassweater_GENERATOR_files/eiffel_tower_christmassweater.png"
myimages[3]="christmassweater_GENERATOR_files/kitty_litter_christmassweater.png"
myimages[4]="christmassweater_GENERATOR_files/spatula_christmassweater.png"

var ry=Math.floor(Math.random()*myimages.length)
if (ry==0)
ry=1
document.write('<a href=''"'+imagelinks[ry]+'"''>')
random_imglink()
//-->
</script>
<!--the HTML:
<a href="#" onclick="function gif_animation(); function random_imglink();">

What's the URL of your site so we can examine it first hand? When you added the code to your post the servers messed it up and tried to render it on the page. We can get the code if we can get to your site.
OT

Publish SWF Output Options Export HTML

I have a number of projects that display the Export HTML,
Output Option of Publish SWF as checked and disabled. When I
publish the project the htm file is not generated. All of these
projects have SCORM Reporting selected and should be producing the
swf file, htm file and scorm_support folder, but all I get is the
swf file. Any thoughts?
Thanks,
Raymond Sugel Sr

IThis is an aside but would be good for other newbies to
know:
what I learned and maybe you already know this is that when I
published (having htm selected) it generated an output folder on
its own!!! Lorn behold my htm, swf, and a file named js (?), I
think was in that folder. I would have never gone looking for
another folder but happened to see that was where I had placed by
1st cp project days earlier.

Output File for HTML Help

I have created an HTML-based Help in RoboHelp. The output file was a *.chm file. The development team is indicating that the *chm file is not what is needed, and that they need an *.htm point/base file to integrate the Help into a web-based application. Is this correct? I thought that was a requirement for Web Help, but not for HTML Help. When integrating an HTML-based Help into a web app, is the individual *chm file the only file that needs to be handed off to development?
Thanks for any help.

Hi there
The .CHM file format is for locally installed applications. WebHelp and FlashHelp are intended for being placed on a central server and accessed from there. WebHelp and FlashHelp exist as a collection of loose files.
You would likely benefit from viewing fellow Adobe Community Professional Peter Grainge's WebHelp articles.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Mobile output error in HTML vs BC export, HELP!?

When I view the site on Business Catalyst the mobile site views properly but when I export it as an HTML and upload it to a different server not hosted in BC it shows differently, HELP! Thanks! See images below for reference...
I have also viewed it in different browsers on the mobile phone... Thanks again!!!
Ok, first off, I have the donswigs.com forward to another site that is hosting the actual webpage and then the address is being masked...
When I go to the direct link, not donswigs.com, the phone view works fine. When I go to the address, the donswigs.com, that's when it show the extra grey space... any fix around for that?
Thanks!!!!!

Hi Helder,
Can you please let me know wether if you have found a solution for this problem....
Bcoz i am also facing the similar one now...
please post the solution if you can...
or GURU'S some help please......................
Thanks in Adv
Dev

Pagination issues in Word output from RoboHelp HTML 8

Hi All,
We're generating a Word document from our online help (RoboHelp HTML 8) with MS Word 2003 installed. The page numbers inserted automatically are wrong in that it's skipping numbers. For example, in scrolling down through the document, the page number after 95 is 97. Sections of the doc are paginated correctly, but then we come to a few pages where it skips a number in assigning page numbers. Some of our users have MS Word 2003 and others have 2007, but the pagination issue is occurring in both versions of Word. (BTW, I'm developing WebHelp Pro on Windows XP.)
Today when I clicked in the Word TOC and pressed F9 to regenerate, it corrected some of the pagination problems but not all (go figure).
Is there a patch I need to download or anything?
Thank you!
Mendonite

Do the unnumbered pages have any content? This is ringing a vague bell and it was a Word issue related to blank pages.
Have you actually printed the document?
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Output ipconfig to html

Similar Messages

Maybe you are looking for