Output Log in Simulation window blank?

why is the output log in the simulation window blank? then it just shows the summary after the simulation is done.

Please attach your project so we can see what is going on. Without the project there is not going to be any way to tell what is going on.

Similar Messages

No output on job step output log with perl's print statement under WINDOWS

Running a perl script ( ActivePerl 5.8.8.x ) on a remote WINDOWS box through llinux-based EM 10.2.04 deployment procedure, in the EM job step output log I've noticed that the print statement in that perl script displays nothing for array or element from array but displays proper value for any scalar variable. Any clue for this kind of issue ?

Running a perl script ( ActivePerl 5.8.8.x ) on a remote WINDOWS box through llinux-based EM 10.2.04 deployment procedure, in the EM job step output log I've noticed that the print statement in that perl script displays nothing for array or element from array but displays proper value for any scalar variable. Any clue for this kind of issue ?

BUG Cannot clear output log with menu mnemonic key in JDev 10.1.2.1

JDev 10.1.2.1 build 1913
Windows XP Professional SP2
Open the output log.
Right click in log window to show the contextual menu.
The "Clear" action has 'r' underlined, but if you press 'r', then nothing happens.

Sorry for the late reply John and Frank. Ya i did. Thank you.
One more detail:
I tested the behavior in Jdeveloper 11.1.2.0.0. The recent surprise is Select One Choice is behaving perfectly when it used in Grid layout and fail to work when it is form layout. I am getting surprised why behavior of component varies based on the way it refers the binding.
for form layout,
value=#{bindings.
for grid layout,
value=#{row.bindings.
The bug details (#/title) are Bug 12968871 - RUNTIME CONVERSION FAILURE WHEN USING CUSTOM DOMAIN OBJECT VALIDATION IN EO
Edited by: Raguraman on Sep 12, 2011 8:23 PM
Edited by: Raguraman on Sep 12, 2011 8:31 PM

How to show waveform in Vivado simulation window? The waveform is absent for some signals.

Hi,
I have the following verilog code:
`timescale 1ns / 1ps
module top(
reg clk = 1;
always
#1.25 clk <= ~clk;
wire temp;
//wire temp2; // added later
assign temp = clk;
//assign temp2 = clk; //added later
endmodule
When I simulate this, I see "CLK" as expected but "temp" just has the value 1 and no waveform. When I uncomment the lines marked as "//added later", I can see "CLK" and "temp2" waveforms as expected. But "temp" is still stuck at 1 and there's not waveform for it.
Then I commented the lines marked as "//added later" again and there's not waveform for "temp". Then I renamed "temp" to "temp2" and simulated. This time I could see "CLK" and "temp2" waveforms in the simulation window toggling as expected.
It could be that I'm just not seeing the waveforms. For example in the first scenario, I'm just seeing a "1" and no waveform. There are also some other signals that when added to the wave window don't show a waveform. How can I enable the waveform?
Thanks,

I tried using a separate module for clock generation as you suggested. In my top level module I instantiate two clocks "CLK_20MHz" and "CLK_25MHz". When I simulate I can see the waveform of both clocks. Then, from the clock module, I add the register "CLK". However, I see no waveforms for "CLK". But when I add "$monitor("%d,\t%b",$time, CLK);" inside the clock module, I can see in the logs that "CLK" is actually toggling as expected. I don't know why the simulation window doesn't show the waveform? And how I can show/enable the waveform?

Hiding password in MaxL output log

On Win2K platform, I have a MaxL script that accepts 2 parameters and performs some actions.I invoke the script using a batch file in the following format:ESSMSH C:\scripts\Script1.msh AdminID passwordThe Maxl script sends all activity to a log file which is then automatically e-mailed to end users.The problem I have is that the log file contains the AdminID and password that was used in the MaxL script. I need all activity in the log because I automatically scan the log for errors.Is there a way using some of the available MaxL Shell Invocation flags that will perfrom the same action but hide the password from showing up in the log?Regards,Tom M.Essbase 6.5.4

We just upgraded to Essbase 7.1.3. Due to security concern, our security auditor is concern we even see the password in the Malx output log. Even we try to doa grep -v or sed -e on the password line to replace the old log, there is still a good window long enough to people to see it.<BR><BR>I tried spool and set message level, but none of them hides the login statement display. I also tried to use shell escape feature to run old ESSCMD login with MaxL, but couldn't get it to work. I was wondering if anyone who may have a new solution to this problem that can fix it on the fly other than fix it after the entire process is complete.<BR><BR>Essbase really should consider provide an option to hide the password in the output logic, or pad it with XXXXXXXXX.

Cannot log in to Windows 8.1 Pro virtual machine!

Hello.
I installed Windows 7 Ultimate on my iMac (Mid 2011) via Boot Camp, then I installed Parallels Desktop 8 and my Windows virtual machine was recognised by PD8. Then I upgraded my Windows version to Windows 8 Pro and added Windows Media Centre. All that was also recognised by PD8. Then I upgraded to Parallels Desktop 9, and everything was going fine.
I recently upgraded my Windows 8 Pro with Media Centre to Windows 8.1 Pro with Media Centre from the Windows partition, and I had no problem with that either. But when I tried to log in to Windows through Parallels Desktop (Windows as a virtual machine), Parallels Desktop didn't recognise the Windows virtual machine!
How can I resolve this issue?!
Thanks.

Hi,
Did we followed this article to update to Windows 8.1 from Windows 8?
Update to Windows 8.1 from Windows 8
For can't find the update in the store, have you checked this article?
Why can't I find the update in the Store?
Please take a check in the question You might be running an edition of Windows 8 that doesn’t support updating from the Store
in the above article for the editions that won't be able to update from Windows store.
Best regards
Michael Shao
TechNet Community Support

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

When logging on to Windows 7 user gets a second mapped drive to the users home folder

Morning,
I'm working through an issue we've discovered whilst trialing Windows 7. Our environment is setup as follows.
Domain Controllers are Windows Server 2003
Clients are Windows XP and Windows 7
Windows XP and Windows 7 Clients are in seperate OU's
All Windows XP Group Policies apply to Windows XP And Windows 7 clients, Windows 7 policies are then applied to Windows 7 clients after
Windows 7 policies are setup such that any setting defined in a Windows XP Group policy is left unconfigured in the Windows 7 Group policy and only new Windows 7 settings have been set in Windows 7 Group Policies.
We have users home folders mapped in their Account Directory account setting and set to H:\   to connect to
\\domainname\dfs\home\username
In addition we also as a fail safe map the drive via a login script using net use
This has worked fine for years in windows XP, if Active Directory failed to map the drive for any reason then the login script would then map the home drive.
In Windows 7 we have noticed a curious error. We found after a period of a couple of weeks we suddenly started getting a new drive mapped. This was identical to the H:\ drive mapping but was instead under drive Z:\. In other words, the
users home folder is mapped twice on h:\ and z:\. This is not affecting any of the Windows XP users.
I have gone through several logic reasons to ascertain why this has happened with the following findings.
1. Originally we thought the error appeared when we tried out mapping the home drive using the mapped drives functionality new in Windows 7 group policy under preferences > windows settings > drive maps. However, after forcing it to delete the
Z:\ drive using this functionality we only succeeded in removing it with a group policy present to do it. As soon as we removed that group policy the Z:\ drive came back
2. Secondly i thought the reason we would be getting a z:\ drive when we haven't specified it anywhere is because active directory is trying to map to the H:\ Drive but it is already present therefore in Windows 7 it tries to map to a different drive.
Using Windows logic it tries the highest letter first which is unlikely to be in use i.e. z:\. This makes sense because our logon script uses a net use h:\ command to map the drive and i believe by default these are set to perisistent. Therefore
the next time the user logs on H:\ is already mapped so the logic in Active Directory accounts maps the drive to Z:\ instead hence we end up with two mapped home drives. To test this i altered the login script to set the drive maps to
non persistent using persistent:no. The logic here was that when the user logged off the drive would become unmapped so that when Active Directory tried to map the drive it would be able to use H:\. Unfortunately this was not the case and
Z:\ remains.
3. Here is where i resolve the issue but i don't know why and is the bit i need answering. If i go into my account on Active Directory and go to Profile and set the home folder drive letter to another letter i.e. change from H:\ to U:\,
i get prompted to set full control etc and apply. I then set the drive back from U:\ to H:\, again i am prompted for setting full control which i accept.
NOW when i login i no longer receive a Z:\ drive and only get an H:\ drive. YAY, thats what i want, however, i do not understand why this is the case. At first i thought it might be something in the active directory logic when i login to an XP
machine and then login to a windows 7 machine.  IF you bear in mind that although i get a new profile in Windows 7 i still retain the same home folder setting. However, after logging on an XP machine logging off then logging
on a Windows 7 machine i still didn't get the Z:\ drive back.
I have tried creating a new user that ONLY receives our Windows 7 Group Policies and still they receive both an H:\ and a Z:\ drive which rules out the Windows XP policies conflicting with the Windows 7 policies.
Does anyone have any ideas why i would get a second drive mapped to Z:\ logging into Windows 7 on a Windows Server 2003 domain?
Can anyone explain in more detail exactly how the Active Directory functionality works when you specify a connect to Drive letter for a users home folder?
My current workaround is simply to add a net use command to remove the Z:\ drive. I do not want to use Mapped Network drives using the new policy settings in Windows 7 RSAT because we have already found issues with it.
<input id="3daf20bf-4f4d-4a05-86da-2c30c205d580_attachments" type="hidden" />

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

Is it possible to resize the log and capture window?

Hi,
Using Final cut pro, I would like to make my capture window a bit bigger while capturing. I am capturing footage via my Blackmagic Infinity card and get the input through an HDMI cable. I'm capturing in Apple Pro ress on 720p, 59,59 fps.
For a good overview of what I'm capturing at the moment, I would love to have a bigger capture window. For all I know, FC pro doesn't support the resizing of the log and capture window. Anyone an idea on how to solve this?
Thank you.

In my case, the capture window is adjustable if I am capturing SD (DVCAM) video. I can also use the scopes in this case. (Good if you are recording to disk, or using a laptop for monitoring.)
However, both features (adjustable capture window and scopes) are not available if capturing HD (HDV in my case) video.
Message was edited by: amarasme

Can't Log in to Windows using the fingerprint scanner.

Hi,
I've had my HP ENVY MJ-j120dx Coe i7 (Windows 8.1 64-bit), product number E8A11UA#ABA for about a year now, and I did a full system wipe using the recovery software that was built in. Before the wipe the fingerprint scanner worked perfectly, however after the wipe the built-in fingerprint scanner no longer works for me to log-in to windows. The device is listed in the manager and is functioning fine. I can use it to scan my fingerprint and register it in the Accounts tab of PC settings. However it does not work to unlock windows. I don't have the message about fingerprint sign-in has been disabled or anything. And I can use it with HP Simple Pass and it works fine, the light to the left of the scanner lights up. But when I try to sign-in to windows it doesn't light up at all or register that I'm swiping my finger acrossed it. Any suggestions to a solution?

Load the default settings in the BIOS, shut down the notebook and then restart it and go back into the BIOS to ensure that the Biometric sensor (fingerprint scanner) has been ebabled.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I couldn't log on my windows 8.1 so I tried to edit utilman and cmd to clear the password but it didn't help

hi,
I could not log on my Windows 8.1 because it was telling me the password is not correct while the passwoord was correct.
so I serached IN Google and found how to work some security files like Ultiman en CMD to clear the password and log again.
but It didn't work because I think I had Microsoft account . I had used this techniek before whit a normal user account and it had worked .
now as a computer man I like to know why changing some keys in config didn't help to clear the password with windows account on windows 8.1.
2- second I want to know if there is other ways to solve such a problem because my work is to solve computer problems!
johan
h.david

Hello h.david,
It is not recommended to use the command to clear or break the password.
Breaking password will create safety risks on Windows security.
It is recommended to follow the step provided by T. Kujala.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MAC Files are not Visible when logged in on Windows

HEllo
I installed 10.5 with Boot camp and Windows XP successfully on my MAc Mini (1GB RAM).
When i log on to MAC i see the Windows partitoned HDD and its contents however when i log on to windows i cant see the MAC Partitoned HDD in windows explorer.
Does any one know a workaround to this issue?
Thanks

What you see has always been and is normal. However, if you must, you can buy MacDrive7 - they have a demo - which allows 32-bit versions of Windows to access (r/w) to HFS+ volumes.

Canon HF11 not showing up in log and transfer window

I am using FC Studio 6.0.6 and a Canon HD USB camera. The camera does not show up in the log and transfer window. It shows up on the desktop, works with iMovie '09 but not FCP. If I try to select files from the camera they are greyed out. Strange thing is is that it works fine on my iMac just not my MBP. I have trashed the FCP and Quicktime preferences but this did not help. HELP please.

I also am wondering what you mean by "file structure"? Do you mean the AVCHD files or something in FCP?
If you look for a particular file on a drive, there's a file structure or "path" to get to it. For instance;
Macintosh HD > Users > Nick > Documents > FCP > Projects > My latest project.
If I don't follow that path, I won't get to the file I am looking for.
Similarly, Final Cut Pro is expecting to see a certain path to the actual video files on your camera's Flash drive. If a folder name along the way is missing or had it's name changed, the path is no longer valid.

Camera is not Appearing in Log and Transfer Window

Hello All,
I feel like I should be able to solve this on my own, but I'm stuck. I've been using a Cannon HF S10 (AVCHD) for a few months. Up until about a week ago when I have connected the camera to my iMac and opened the Log and Transfer window all of the clips on the camera have appeared, but now they don't. I had this happen another time with a different camera and and after trashing the FCE preferences I was able to see the clips in the L&T window. So I trashed the FCE preferences, but this time I still do not get the clips in the L&T window.
The camera mounts to my desktop and also appears in Finder, so I tired clicking on the "Add Folder" button on the top left corner of the L&T screen and adding "CANNON". This did not produce the clips in the L&T widow. I also tried to add the folder that is one level down labeled "AVCHD", but this did not work either.
Any direction would be greatly appreciated. Thanks, in advance.
Marc

Ok...nevermind. All of the thumbnails appeared. There are a lot of clips on the camera, so I'm guessing that this is the reason for the lengthy loading time.
Marc

SRM PO Output log table name

Hi,
We are using extended classic scenario. PO is created in SRM. When SRM PO is created, email is sent to supplier. I wanted to know the name of SRM PO output log.
Regards,
Satish Aralkar

Hi Satish,
If you want to see the Output sent from SRM you can check the transaction SOST.
OR
if you want to check the triggered output for PO:
You can use transaction BBP_PPF to see the output logs
Enter the following values for PO log:
1.Action definition = 'STANDARD_PO'
2. Application Key = Enter PO Number
You can remove any value in time Frame.
Click on Start .You will see all the triggered output's for PO.
You can access this in Web GUI (ITS) with trasaction link 'Issue Purchase Order'
If you want to see the Output sent from SRM you can check the transaction SOST.
Table name : PPFTTRIGG
Best Regards,
Sapna
Edited by: Sapna Patil on May 20, 2009 5:52 AM

Output Log in Simulation window blank?

Similar Messages

Maybe you are looking for