Output the run result

Dear Guru:
I have run sql via the step like this:
c:sql>@parameter_check.sql
but at the command prompt the output display very fast and overwrite .
how to output the result to another file to display output again.
Thanks in advance.

Hi;
Answer is:
spool log file
Regard
Helios

Similar Messages

Back date change problem in run result

Dear Experts,
Navigate:
Work Structure>Organization>Description
i implement organization structure Jan 2010 in R12 HRMS Global . now change appear in organization structure effective date Jan2011. but this change not done till date in system. i date track to 01-Jan-2011 and create new organization structure (Work Structure>Organization>Description) & attach to employees assignments by opening all old pay periods (Payroll>Description) from jan 11 to aug 11. now when i run payroll the run result cannot match our hard copies payslip tht ws run in jan 11.(before change of organization structure)
i am new dont know if the above way is rite or wrong?
i confuse ...not kno what is cause?
plz help urgently!
Edited by: 890115 on Oct 21, 2011 3:44 AM

You will have to explain the steps properly -
What is it that you want to achieve ?
What is it that you have done, so far ?
Unless others in the forum understand what you want to convey, it is really difficult to expect responses.
So, help others to help you :)
cheers,
VB

How to output a query results into a text file

How to output a query results into a text file instead of outputing it to the screen..
is there a way for us to write a SQL query which specifies to output the query results to a text file.
Pls let me know how to do it
Thanking u in advance
regards
Muraly

Muraly,
If you are using SQL*Plus 8.1.6 or later, you can also spool output to a file in HTML format, eg
SET MARKUP HTML ON SPOOL ON PREFORMAT OFF ENTMAP ON
SPOOL c:\temp\report.html
SELECT DEPARTMENT_NAME, CITY
FROM EMP_DETAILS_VIEW
WHERE SALARY>12000;
SPOOL OFF
SET MARKUP HTML ENTMAP OFF
In iSQL*Plus 9.0.1 (the browser-based interface to SQL*Plus) onwards, you can also send the HTML output to a new web browser window, or an html file -- much easier than the command line method.
Alison

Run payroll simulation in ABAP and get the payroll result in ABAP

Dear Expert,
Is there anyway I can simulate the payroll for a particular payperiod and employee in ABAP and then get the pay result for it in ABAP?
Please help
Best Regards,
WF

I doubt it. If you run payroll in simulation mode then no clusters gets created. This means no physical commit on DB takes places once results are generated. On the other hand capturing the results in flow is not probably achieveable too. This would mean interfering in payroll inner calucation or capturing them at the end (once results are dispalyed). You can of course send them to spool but importing its content to ABAP would be meaningless as the output is in tree form.
So in my opinion there is no such way.
Regards
Marcin

How to get the output .pdf file of a quiz to report to the quiz results analyzer on my internal server (mamp)

I created a quiz.
Created an internal server on my compute rising a MAMP.
When I publish my quiz using the multi-file publishing options...
I am able to use both the "HTML" and the "swf" output files to complete a quiz and reporting the results to the quiz results analyzer.
However, I am unable to get the output .pdf field to reporting to the quiz results analyzer.
Any help? Would this issue have to do with the Acrobat Professional setting? Captivate setting? My internal server setting? or output fuel placement?
I tired to put the .pdf file in the same MAMP root folder location as my "internalserverreporting.php and internalserverread.php files.
Thanks for the help.

Hello Varun,
You cqan submit the report as a JOB and export the out put to memory, once the job is complete you can read the list to display the output.
Cheers,
Mano
Cut & Paste form SAP help.
Submit report ....
EXPORTING LIST TO MEMORY
Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST".

Office Telemetry Agent Last Run Result 0x800700005 and machines not reporting back in the Telemetry Dashboard

We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.

I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks.

DIO Pass or Fail Tests: LabVIEW would have to determine the expected result or results (1 or 2 of a possible 25) based on the output pattern send out (1 of 65K).

I am trying to come up with a plan to write a LabVIEW VI to do the following test. Can you give me a few ideas how to do this in LabVIEW. I am a new to LabView. I think I how to read and write I/O ports and do comparisons. I need a little guidance on the error checking. In simple terms the test will go like this:
I have 16 digital inputs and 16 outputs.
The 16 outputs are turned on in a specific pattern (i.e. 1001000101011101) and then the 16 inputs (i.e. 1000101111111111) are read in after a time delay. The inputs are checked to see if they match the expected results. If they do it's a pass if not it's a f
ailure. This seems pretty straightforward. And I think I have an idea how to do it. Here's the problem. The inputs are changed sequentially so that all possible combinations are tried. The test needs to determine if the resulting input pattern is correct based on the outputs that were sent out. 16 outputs give 65K possible tests. For each tests there would be 1 or 2 possible results with a total of 25 results for the entire 65K possible tests. LabVIEW would have to determine the expected result or results (1 or 2 of the 25) based on the output pattern send out (1 of 65K). Then it would have to compare the actual input pattern received to see if it's a pass or fail?
Any ideas how I can approach this?

The 16 outputs are simulating inputs to the device under test, (simulating remote switches and contacts). The object of the test is to test every possible combination to ensure that nothing unexpected happens at the output. The device under test is a logic motor control system and we want to make sure (among other things) that we don’t start or stop the motor when its not suppose to. How can only two tests do that?
I think you are describing how to create an array with the results. But I still don’t know how to determine what the result should be and if it is correct.
I’ve identified 25 possible valid states the motor controller can be in.
I’ve also identified the correct outputs that determine each of the 25 states.
I’ve also
identified the possible valid states you can go to from each (previous) state, You can only get to a valid new state from a previous state if the right combination of inputs is applied (we hope).
If you know what state you are in when start and you know the valid states you can go to and the inputs required to get there, you should be able test the system against that. You verify this by checking the outputs against what they should be. With 65K possible inputs combination, checking them all manually would be quite is a task. Putting this into LabView is my task.

Outputing the results of your programs

In C++ I always output the results of my programs to the screen. Because I was always making just console programs I would use cout like this:
int main( )
int product = 2;
while(product <= 1000)
cout << 2 * product;
return 0;
Now I have a 5 year old Deitel book that I've been looking through and it appears that they rely more on using some GUI components. They will mostly output the results to dialog boxes or message boxes.
I was wondering is that the only way in Java to output the results of your programs? For example how could I write the above program in Java outputing the results to the console window?

public class MyOutput{
public static void main(String args[]){
System.out.println("Hello World"); // <<-- Output to a console.....
}

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all plug-ins, and I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

Whenever I run Firfox 4.0, my computer fan runs continuously. I have disabled all Firefox plug-ins, but I get the same result. This did not happen with Firefox 3.x, and it doesn't happen with IE 8.0. Any ideas?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Customizing the Employee Run Result History

Hi,
Need some guide here.
We are required to customize the Employee Run Result History form to restrict the Element Name which is in a LOV.
This restriction applies only for the responsibility that we are creating.
The restriction form that we have come across so far is the Element Entry, Enter Person Special Info and etc.
Need the expertise advice here on resolving this issue.
Thanks in advance.
Deva

"jriber" <[email protected]> wrote in
message
news:fhcrve$gvr$[email protected]..
> I am designing a site for an audience in Tanzania, where
internet speeds
> are
> slow. The page uses the spry framework, both accordions
and menu bars, and
> connected images. The result is that the page loads very
disjointedly and
> frankly it looks unprofessional and ugly, especially on
slow speeds. Is
> there a
> way to run a blank page that says "Please wait while
your page loads"
> until the
> page loads?
>
> I am quite new at Dreamweaver and any help is greatly
appreciated.
>
> I am running CS3.
Try the spry:state attribute
http://livedocs.adobe.com/en_US/Spry/1.4/help.html?content=WSFC2EB69F-9F15-4005-A993-B7667 BA7EB75.html

How to use Labview to output the coordinates from Pattern Matching result

I tried to add some labview commands into the vi program created by IMAQ Pattern Matching scrip to output the coordinates of a target point found in Pattern Matching because i need to do some calculations for the point coordinates and I don't want just to read the values from the IMAQ results on the monitor. Does anyone can help me? Thank you.
Attachments:
PatternMatching1.vi ‏84 KB

I have posted replies to your other postings with your same question, and continue to recomend that you look at some of the LabVIEW tutorials.
I modified the attched program such that it would index the arrays of match information returned and then unbundle the X and Y features of the match and add them to gether as an example of how to access the data programatically.
I hope this helps.
Regards,
Amaury Rolin
NI Applications Engineer
Attachments:
PatternMatching_mod.vi ‏88 KB

Modifying the text "Result" and "Overall Result" in a BEx query output

Hi,
1) Is it possible to modify the text "Result", "Overall Result" which appears in the sub-total and grand total lines of BEx query output? I do not see any related setting the properties area of the object in BEx Query designer. Do I have to write some VB code or can I do something in Customer Exits?
Also my client wants that this text need to be made dynamic such as "Sub-Total for the month of Jan 2006".
I can use work book option and change the texts manually.But this is not meeting my clients requirement.
2)Is it possible to have dynamic title text for a BEx query?
We are on BW 3.5 & if any of you could provide / guidance to the above issue.
Thanks,
Venkatram

You will have to use VB Macros to change the text "Result" and "Overall Result", there is not settings in the query designer for the same.
You can have dynamic descriptions for queries using text variables like Expense Query for month of Jan 2006, if user selected Jan 2006.
Thanks.

I just downloaded and installed the 64bit itunes, but I get an error 2 "Apple application support required to run Itunes, uninstall and install again" I did that twice and got the same result

I am a Windows 7 user and everything has been fine, but when I just tried to open itunes I got an Error 2 message. "Apple application support not found. uninstall and install itunes again." I have done that twice with the same result. this was the 64 bit version.

Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes 10.4.1 for Windows (64 bit).

Can query output the result into excel with a fix format?

Hi Expert,
My user giving me a requirement for new reports. They do not want the standard SAP report format but they want the result to be populate into a excel template with their own fix format. Can BW generate the report like this? Or it is out of the functionality of BW. FYI, I'm using SAP BI 7.0.
Thanks!
Regards.

Hi Ang,
You have a way to do through the Bex Analyzer.
Please get the excel template in that please use a analysis design item in the place of the query result display.
Then after adding the analysis item then please assign a DP (data provider) with the query you have created.
After that please save the work book in your roles or fav's.
Note: some important settings has to be changed for the workbook.
In workbook settings, tick mark the property "REFRESH upon open of work book"
With Regards,
Ravi

TABLE(CAST()) function not returning the correct results in few scenarios.

I am using TABLE(CAST()) operation in PL/SQL and it is returning me no data.
Here is what I have done:
1.     Created Record type
CREATE OR REPLACE TYPE target_rec AS OBJECT
target__id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
targe_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Created Table type
CREATE OR REPLACE TYPE target_arr AS TABLE OF target_rec
3.     Created Stored procedure which accepts parameter of type target_arr and runs the Table(Cast()) function on it.
     Following is the simplified form of my procedure.
     PROCEDURE get_target_weights
     p_in_template_target IN target_arr,
     p_out_count          OUT NUMBER,
     IS
     BEGIN
          SELECT count(*) into p_out_count
     FROM TABLE(CAST(p_in_template_target AS                     target_arr)) arr;
     END;
I am calling get_target_weights from my java code and passing p_in_template_target with 10140 records.
Scenario 1: If target_pct in the last record is 0, p_out_count returned from the procedure is 0.
Scenario 2: If target_pct in the last record is any other value(say 0.01), p_out_count returned from the procedure is 10140.
Please help me understand why the Table(Cast()) is not returning the correct results in Scenario 1. Also adding or deleting any record from the test data returns the correct results (i.e. if keep target_pct in the last record as 0 but add or delete any record).
Let me know how can I attach the test data I am using to help you debugging as I don’t see any Attach file button on Post Message screen on the forum.

I am not able to reproduce this problem with a small data set. I can only reproduce with the data having 10140 records.
I am not sure if this is the memory issue as adding a new record also solves the problem.
This should not be the error because of wrong way of filling the records in java as for testing purpose I just saved the records which I am sending from java in a table. I updated the stored procedure as well to read the data from the table and then perform TABLE(CAST()) operation. I am still getting 0 as the output for scenario 1 mentioned in my last mail.
Here is what I have updated:
1.     Created the table target_table
CREATE Table target_table
target_id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
target_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Inserted data into the table : The script has around 10140 rows. Pls let me know how can I send it to you
3.     Updated procedure to read data from table and stored into variable of type target_arr. Run Table(cast()) operation on target_arr and get the count
PROCEDURE test_target_weights
IS
     v_target_rec target_table%ROWTYPE;
     CURSOR wt_cursor IS
     Select * from target_table;
     v_count NUMBER := 1;
     v_target_arr cws_target_arr:= target_arr ();
     v_target_arr_rec target_rec;
     v_rec_count NUMBER;
     BEGIN
     OPEN wt_cursor;
     loop
          fetch wt_cursor into v_target_rec; -- fetch data from table into local           record.
          exit when wt_cursor%notfound;
          --move data into target_arr
          v_target_arr_rec :=                     cws_curr_pair_entity_wt_rec(v_target_rec target_id,v_target_rec. target_entity_id,
                    v_target_rec.dd,v_target_rec.fd,v_target_rec.code,v_target_rec.target_pct,
     v_target_rec.template_nm,v_target_rec.p_symbol,v_target_rec.pm_init,v_target_rec.template_name,
     v_target_rec.template_type,v_target_rec.template_caption,v_target_rec.sort_order);
          v_target_arr.extend();
          v_target_arr(v_count) := v_target_arr_rec;
          v_count := v_count + 1;
     end loop;
     close wt_cursor;
     -- run table cast on target_arr
     SELECT count(*) into v_rec_count
     FROM TABLE(CAST(v_target_arr AS target_arr)) arr;
     DBMS_OUTPUT.enable;
     DBMS_OUTPUT.PUT_LINE('p_out_count ' || v_rec_count);
     DBMS_OUTPUT.PUT_LINE('v_count ' || v_count);
END;
Output is
p_out_count 0
v_count 10140
Expected output
p_out_count 10140
v_count 10140

Output the run result

Similar Messages

Maybe you are looking for